Resources
A freight railroad car of mass is moving along a straight horizontal track at a constant velocity of . It collides with and automatically couples to a stationary second freight car of mass . Assuming external resistive forces along the track are negligible during the collision, calculate the final common velocity of the coupled freight cars immediately following the collision.
Answer and steps
Final answer
in the original direction of motion
Steps
Identify the Physical Principle and Define the System
Choose the system to be the two freight cars: and .
Because the collision occurs along a straight, horizontal track and external horizontal resistive forces (such as friction) are negligible over the brief duration of impact, the net external horizontal force on the system is zero:
According to the law of conservation of linear momentum, the total initial momentum of the system before the collision equals the total final momentum immediately after the collision:
Formulate the Conservation of Momentum Equation
Before the collision:
- Mass of moving car:
- Initial velocity of moving car:
- Mass of stationary car:
- Initial velocity of stationary car:
The cars couple together upon impact, moving as a single combined mass with a shared final velocity (a completely inelastic collision).
Equating the total momentum before and after the collision gives:
Since , this simplifies to:
Solve for the Final Common Velocity
Rearrange the equation to isolate :
Substitute the numerical values:
The positive sign indicates that the coupled cars continue moving in the original direction of motion of the first car.
Common Pitfall to Avoid
Do not attempt to use conservation of mechanical kinetic energy here. When two objects stick or latch together, the collision is completely inelastic, meaning a significant portion of the initial kinetic energy is converted into thermal energy, sound, and mechanical deformation of the couplers. Momentum, however, is strictly conserved.
Typical errors
01 The student subtracts the masses instead of adding them when finding the combined mass of the coupled cars, yielding an incorrect final velocity of +7.20 m/s.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
When two objects stick or couple together, their masses combine additively into a single system of mass , not .
- Step 2Correct
Your algebraic manipulation was executed cleanly, but the calculation was affected by the incorrect subtracted mass term from Step 1.
- Step 3Correct
Because of the reduced mass denominator, your final speed became instead of the correct .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that horizontal linear momentum is conserved during the collision.
You correctly identified that the second car was initially stationary with zero initial momentum.
You carried out your arithmetic and algebraic isolation of the variable accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou subtracted the second car's mass from the first car's mass rather than adding them together to find the total combined inertia after coupling. A helpful physical sense check is that coupling to a stationary object increases the total inertia carrying the initial momentum, which must cause the final velocity to be smaller than the initial velocity (), never larger.
REASONING PATH
Your ACEpath teacher’s suggested approach- Combined Mass in Completely Inelastic Collisions
When two or more objects couple, latch, or stick together, the final mass is the scalar sum of all individual masses: .
Always write for the final momentum whenever objects move together as a single unit.
- Physical Sanity Check for Inelastic Collisions with a Stationary Object
If a moving mass collides with and sticks to a stationary mass without external propulsion, the resulting shared speed must always be less than the initial speed ().
Compare your computed final velocity against the initial velocity; if your answer is faster than before the collision, verify the total system mass.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the total initial momentum equal to the total final momentum:
Substitute the given values with the additive combined mass:
Simplify both sides:
Solve for :
02 The student forgets that the cars stick together and omits the stationary car's mass from the final momentum, resulting in no change in velocity (v_f = +2.40 m/s).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You accounted for the initial momentum of Car 1, but because the two cars couple together during impact, the total mass moving after the collision is rather than alone.
- Step 2Correct
Your algebraic isolation correctly followed from your setup in Step 1, but the numerical answer is incorrect due to the omitted mass .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the collision is governed by the conservation of linear momentum.
You accurately substituted the initial mass and velocity values for the moving railroad car.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the collision as if the first car continued moving in isolation without coupling to the stationary car.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the definition of a completely inelastic collision where interacting bodies stick or couple together and move as a combined system with total mass .
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Post-Collision State
When objects stick or couple together, their final momentum is .
Always write the final mass as the sum of all stuck bodies before isolating the final velocity.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the total momentum conservation equation for a coupling collision: .
Substitute : .
Simplify the combined mass: .
03 The student assumes kinetic energy is conserved in the collision rather than momentum, obtaining an incorrect final velocity of approximately +1.86 m/s.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You assumed that kinetic energy is conserved. In an inelastic collision where objects couple or stick together, kinetic energy is not conserved; total linear momentum must be used instead because net external horizontal forces are negligible.
- Step 2Correct
Your algebraic simplification and arithmetic were carried out accurately, but this step carries forward the incorrect kinetic energy relationship.
- Step 3Correct
Your final value follows directly from taking the square root of your previous result, but it differs from the correct velocity due to the initial governing equation.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the combined mass of the coupled cars as .
You solved the resulting algebraic equation cleanly and performed accurate arithmetic throughout your calculation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo arithmetic slips were made; all calculation steps followed your chosen formula correctly.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated a completely inelastic collision as an elastic collision conserving kinetic energy. When objects couple, lock, or stick together, macroscopic kinetic energy is converted into internal thermal energy, acoustic energy, and deformation, meaning kinetic energy is not conserved. Momentum is always conserved in any collision where net external forces are negligible.
REASONING PATH
Your ACEpath teacher’s suggested approach- Collision Type & Conservation Principle
Momentum is conserved in all isolated collisions; kinetic energy is only conserved in perfectly elastic collisions.
Check whether objects stick together or deform. If they couple or stick, mechanical kinetic energy is lost, so you must always start with .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply conservation of linear momentum:
Write the momentum equation for the two cars:
Substitute the given values:
Solve for :
Lock it in
When two objects stick together upon colliding, what is the expression for their total final momentum in terms of their masses and and shared velocity ?
. Mass is a scalar quantity, so combining objects always sums their individual masses.
Similar question
A car traveling east at collides with and latches onto a stationary truck. Assuming friction is negligible during the impact, calculate the velocity of the locked vehicles immediately after collision.
Answer
east. Using momentum conservation: .
A arrow is shot horizontally at into a stationary target block of wood resting on a smooth surface. The arrow embeds itself in the wood. What is the final common speed of the block and embedded arrow?
Answer
. Using momentum conservation: .
Car A of mass moves at speed and collides with stationary Car B of mass . They couple together. The pair then immediately collides with and couples to a third stationary Car C of mass . Express the final speed of all three coupled cars in terms of .
Answer
. The total initial momentum of the system is . When all three cars couple together, their total combined mass is . Applying conservation of linear momentum: .