Resources
A step-down transformer operating from an ac line source with an rms primary voltage of supplies electrical power to a resistive heating element with resistance connected directly across its secondary terminals. An ammeter measures an rms primary current of . Assuming ideal transformer behavior with negligible core and resistive losses: (a) Determine the turns ratio of the transformer. (b) Calculate the secondary rms current delivering power to the load.
Answer and steps
Final answer
(a) (or ); (b)
Steps
Part (a): Determine the turns ratio
- Apply conservation of energy for an ideal transformer:
In an ideal transformer, core losses and winding resistance are negligible, meaning the input electrical power delivered to the primary coil equals the output electrical power consumed by the load connected across the secondary coil: - Express both powers in terms of given quantities:
The primary power is the product of the primary rms voltage and primary rms current: The power delivered to the resistive load is: - Solve for the secondary rms voltage :
Equating input and output power: - Calculate the turns ratio :
The transformer equation relates the turns ratio directly to the ratio of voltages:
Part (b): Calculate the secondary rms current
- Use Ohm's Law across the secondary load:
With the secondary voltage established across the resistor : - Alternative verification using current and turns ratio:
For an ideal transformer, : Alternatively, from :
Common Pitfall: Remember that a step-down transformer decreases voltage (), but increases current () to maintain power conservation. Be careful not to invert the relationship between turns ratio and current.
Typical errors
01 The student confuses the inverse current ratio for an ideal transformer by assuming currents are directly proportional to turns ratio (Is/Ip = Ns/Np).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
For an ideal transformer, power conservation () requires that current is inversely proportional to voltage and turns ratio. In a step-down transformer where voltage decreases, current must increase.
- Step 4Correct
This result was carried forward from the inverted current-turns ratio formula. Using either Ohm's law across the load () or the correct inverse relation () gives approximately .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the power equation to determine the input power.
You used conservation of energy to relate primary power to load power.
You accurately solved for the secondary voltage and correctly computed the turns ratio .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the ratio of currents as directly proportional to the turns ratio (rac{I_s}{I_p} = rac{N_s}{N_p}) instead of recognizing that conservation of electrical power requires currents to scale inversely with voltages and turns (rac{I_s}{I_p} = rac{N_p}{N_s}).
REASONING PATH
Your ACEpath teacher’s suggested approach- Power Conservation Rule
For an ideal transformer, input power equals output power: .
Rearrange to get whenever you relate currents.
- Step-Down Sanity Check
A step-down transformer steps voltage DOWN and current UP.
Check that since , the secondary current must satisfy .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply Ohm's law directly across the secondary load: .
Substitute the secondary voltage and load resistance: .
Alternatively, use the inverse current relation: .
(a) ; (b)
02 The student mistakenly treats the load resistance as being directly connected across the primary source to find primary voltage drop or power, assuming Vs = Vp.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
A transformer changes the voltage from primary to secondary, so . For an ideal transformer, input power equals output power: .
- Step 2Correct
You correctly stated the relationship , but the numerical value was affected by your assumption that .
- Step 3Correct
You correctly applied Ohm's law , but the calculation carried over the incorrect value of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the ideal transformer turns ratio formula relating voltage and turns.
You correctly applied Ohm's law to relate secondary current, secondary voltage, and load resistance.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set the secondary voltage equal to the primary line voltage instead of solving for the secondary voltage using conservation of power.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the load resistance as if it were connected directly across the primary ac source, bypassing the voltage transformation and the power balance between primary and secondary circuits.
REASONING PATH
Your ACEpath teacher’s suggested approach- Ideal Power Conservation
For an ideal transformer, input electrical power equals output electrical power: , so .
Calculate the input power from primary readings first, then set it equal to the power dissipated by the secondary load resistor.
- Transformer Voltage Transformation
In a step-down transformer, and .
Always verify that your calculated turns ratio is strictly less than 1 for a step-down transformer and strictly greater than 1 for a step-up transformer.
CORRECTED PATH
ACEpath Teacher's DemonstrationFind input power: .
Equate input power to load power: .
Compute turns ratio: .
Compute secondary current: (or using current conservation ).
(a) (or ); (b)
03 The student inverts the transformer impedance transformation formula, writing Rp = RL * (Ns/Np)² instead of RL * (Np/Ns)².
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You inverted the impedance reflection formula. The reflected primary resistance is . Because this is a step-down transformer (), the turns ratio must be less than .
- Step 3Correct
Your method of finding and was conceptually consistent with your previous value, but the numerical answer is incorrect due to the inverted turns ratio from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the effective input resistance of the primary circuit as .
You correctly related secondary voltage to primary voltage through the turns ratio.
You correctly applied Ohm's law across the secondary load resistance to find secondary current.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing how voltage, current, and impedance scale with the transformer turns ratio. Because and , dividing them gives .
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Step-Up vs. Step-Down
For a step-down transformer, secondary voltage decreases (), so .
Whenever a problem specifies a step-down transformer, verify that your calculated turns ratio is less than 1.
- Derive Reflected Resistance from First Principles
.
If you forget whether the factor is or , re-derive it in one line using .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the correct reflected resistance formula: .
Substitute and : .
Take the square root to find , which gives the turns ratio .
Calculate secondary rms voltage: .
Compute secondary current: .
(a) (or ); (b)
Lock it in
How are primary and secondary currents related to the turns ratio in an ideal transformer?
Inversely: . Power conservation () forces current to scale opposite to voltage and turns.
Similar question
An ideal step-down transformer with primary voltage and turns ratio delivers power to a load resistor. Calculate: (a) the secondary voltage , (b) the secondary current , and (c) the primary current .
Answer
(a) . (b) . (c) (or from , ).
An ideal transformer powers a speaker connected across its secondary winding. The primary operates at drawing . Determine: (a) the output power delivered to the speaker, (b) the secondary rms current , and (c) the turns ratio .
Answer
(a) . (b) . (c) (or ).
A step-up transformer has primary voltage and delivers of power to a resistive load at . (a) Find the turns ratio . (b) Find the primary current and secondary current . (c) Verify that .
Answer
(a) . (b) ; . (c) , confirming current is stepped down when voltage is stepped up.