Resources

A rescue flare is launched from flat ground with an initial speed of v0=42.0 m/sv_0 = 42.0\text{ m/s} at an elevation angle of θ=35.0∘\theta = 35.0^\circ above the horizontal. Define a standard Cartesian coordinate system where the positive xx-axis points horizontally forward in the direction of launch and the positive yy-axis points vertically upward. Neglecting air resistance and taking the acceleration due to gravity as g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the initial horizontal velocity component v0xv_{0x} and the initial vertical velocity component v0yv_{0y}.

Answer and steps

Final answer

v0x=34.4 m/sv_{0x} = 34.4\text{ m/s}, v0y=24.1 m/sv_{0y} = 24.1\text{ m/s}

Steps

01

Understand the Vector Geometry

The initial velocity vector v⃗0\vec{v}_0 points upward and forward at an angle θ=35.0∘\theta = 35.0^\circ relative to the positive horizontal axis (+x+x). Together with its horizontal and vertical projections, the vector forms a right-angled triangle where:

  • The hypotenuse is the magnitude of the initial velocity: v0=42.0 m/sv_0 = 42.0\text{ m/s}.
  • The adjacent side along the horizontal axis represents the initial horizontal component: v0xv_{0x}.
  • The opposite side parallel to the vertical axis represents the initial vertical component: v0yv_{0y}.

02

Calculate the Horizontal Component (v0xv_{0x})

Using the definition of the cosine ratio for a right triangle: cos⁡θ=adjacenthypotenuse=v0xv0\cos\theta = \frac{\text{adjacent}}{\text{hypotenuse}} = \frac{v_{0x}}{v_0}

Rearranging to solve for v0xv_{0x}: v0x=v0cos⁡θv_{0x} = v_0 \cos\theta

Substitute the given values: v0x=42.0 m/s⋅cos⁡(35.0∘)v_{0x} = 42.0\text{ m/s} \cdot \cos(35.0^\circ) v0x≈42.0 m/s⋅0.8192≈34.4 m/sv_{0x} \approx 42.0\text{ m/s} \cdot 0.8192 \approx 34.4\text{ m/s}


03

Calculate the Vertical Component (v0yv_{0y})

Using the definition of the sine ratio for a right triangle: sin⁡θ=oppositehypotenuse=v0yv0\sin\theta = \frac{\text{opposite}}{\text{hypotenuse}} = \frac{v_{0y}}{v_0}

Rearranging to solve for v0yv_{0y}: v0y=v0sin⁡θv_{0y} = v_0 \sin\theta

Substitute the given values: v0y=42.0 m/s⋅sin⁡(35.0∘)v_{0y} = 42.0\text{ m/s} \cdot \sin(35.0^\circ) v0y≈42.0 m/s⋅0.5736≈24.1 m/sv_{0y} \approx 42.0\text{ m/s} \cdot 0.5736 \approx 24.1\text{ m/s}


Key Pitfall to Avoid

Always check whether the launch angle is measured with respect to the horizontal or the vertical. If an angle is measured from the vertical, the trigonometric roles reverse (sin⁡\sin gives the horizontal component and cos⁡\cos gives the vertical component). Since θ\theta is explicitly measured from the horizontal ground here, the adjacent horizontal side corresponds to cos⁡θ\cos\theta and the opposite vertical side corresponds to sin⁡θ\sin\theta.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student swaps the sine and cosine functions when resolving the velocity components relative to the horizontal.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0x=v0sin⁡(θ)  ⟹  v0x=42.0×sin⁡(35.0∘)  ⟹  v0x=24.1 m/sv_{0x} = v_0 \sin(\theta) \implies v_{0x} = 42.0 \times \sin(35.0^\circ) \implies v_{0x} = 24.1\text{ m/s}

    Correct

    v0x=v0cos⁡(θ)=42.0 m/s⋅cos⁡(35.0∘)≈34.4 m/sv_{0x} = v_0 \cos(\theta) = 42.0\text{ m/s} \cdot \cos(35.0^\circ) \approx 34.4\text{ m/s}

    Because the launch angle θ=35.0∘\theta = 35.0^\circ is measured from the horizontal ground, the horizontal side is adjacent to θ\theta. The adjacent side requires the cosine function, so v0x=v0cos⁡θv_{0x} = v_0 \cos\theta rather than v0sin⁡θv_0 \sin\theta.

  2. Step 2

    v0y=v0cos⁡(θ)  ⟹  v0y=42.0×cos⁡(35.0∘)  ⟹  v0y=34.4 m/sv_{0y} = v_0 \cos(\theta) \implies v_{0y} = 42.0 \times \cos(35.0^\circ) \implies v_{0y} = 34.4\text{ m/s}

    Correct

    v0y=v0sin⁡(θ)=42.0 m/s⋅sin⁡(35.0∘)≈24.1 m/sv_{0y} = v_0 \sin(\theta) = 42.0\text{ m/s} \cdot \sin(35.0^\circ) \approx 24.1\text{ m/s}

    The vertical component is opposite to the launch angle θ\theta. The opposite side requires the sine function, so v0y=v0sin⁡θv_{0y} = v_0 \sin\theta rather than v0cos⁡θv_0 \cos\theta.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that vector resolution splits the total velocity into two orthogonal components.

You substituted the given speed and angle into your equations with the correct units and significant figures.

You performed the numerical arithmetic correctly for each trigonometric product.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Swapped trigonometric components relative to the reference axis

No, this is a conceptual misunderstanding of which side is adjacent versus opposite to the reference angle.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the horizontal xx-direction with sine and the vertical yy-direction with cosine, reversing the right-triangle definitions of adjacent (cosine) and opposite (sine) when the angle is measured from the horizontal.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the reference axis
  • If an angle θ\theta is measured with respect to the horizontal axis, the horizontal component is adjacent to θ\theta and the vertical component is opposite to θ\theta.

  • Sketch the right triangle with the launch angle at the origin and label the adjacent leg (vxv_x) and opposite leg (vyv_y).

Apply right-triangle trigonometry definitions
  • cos⁡θ=adjacenthypotenuse\cos\theta = \frac{\text{adjacent}}{\text{hypotenuse}} and sin⁡θ=oppositehypotenuse\sin\theta = \frac{\text{opposite}}{\text{hypotenuse}}.

  • Write vx=vcos⁡θv_x = v \cos\theta and vy=vsin⁡θv_y = v \sin\theta whenever the angle is referenced to the horizontal.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Sketch the right triangle where the hypotenuse is v0=42.0 m/sv_0 = 42.0\text{ m/s} and the angle θ=35.0∘\theta = 35.0^\circ touches the horizontal base.

  2. Set the adjacent horizontal component to v0x=v0cos⁡(35.0∘)=42.0⋅0.8192≈34.4 m/sv_{0x} = v_0 \cos(35.0^\circ) = 42.0 \cdot 0.8192 \approx 34.4\text{ m/s}.

  3. Set the opposite vertical component to v0y=v0sin⁡(35.0∘)=42.0⋅0.5736≈24.1 m/sv_{0y} = v_0 \sin(35.0^\circ) = 42.0 \cdot 0.5736 \approx 24.1\text{ m/s}.

Final answer

v0x=34.4 m/sv_{0x} = 34.4\text{ m/s}, v0y=24.1 m/sv_{0y} = 24.1\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw a quick vector triangle and label the sides as adjacent and opposite before writing down trigonometric formulas.

  • Check your values conceptually: since 35.0∘<45.0∘35.0^\circ < 45.0^\circ, the flare travels more horizontally than vertically, so v0xv_{0x} must be larger than v0yv_{0y}.

OverviewACEpath Teacher's Diagnosis

02 The student evaluates the trigonometric functions with the calculator in radian mode instead of degree mode.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0x=v0cos⁡(θ)  ⟹  v0x=42.0×cos⁡(35.0)v_{0x} = v_0 \cos(\theta) \implies v_{0x} = 42.0 \times \cos(35.0)

  2. Step 2

    v0x=−38.0 m/sv_{0x} = -38.0\text{ m/s}

    Correct

    v0x=42.0cos⁡(35.0∘)≈34.4 m/sv_{0x} = 42.0 \cos(35.0^\circ) \approx 34.4\text{ m/s}

    You evaluated cos⁡(35)\cos(35) in radians rather than degrees (cos(35 rad)≈−0.9037\\cos(35\text{ rad}) \approx -0.9037, giving −38.0 m/s-38.0\text{ m/s}). In degree mode, cos⁡(35.0∘)≈0.8192\cos(35.0^\circ) \approx 0.8192, which gives +34.4 m/s+34.4\text{ m/s}.

  3. Step 3

    v0y=v0sin⁡(θ)  ⟹  v0y=42.0×sin⁡(35.0)v_{0y} = v_0 \sin(\theta) \implies v_{0y} = 42.0 \times \sin(35.0)

  4. Step 4

    v0y=−17.9 m/sv_{0y} = -17.9\text{ m/s}

    Correct

    v0y=42.0sin⁡(35.0∘)≈24.1 m/sv_{0y} = 42.0 \sin(35.0^\circ) \approx 24.1\text{ m/s}

    You evaluated sin⁡(35)\sin(35) in radians rather than degrees (sin(35 rad)≈−0.4282\\sin(35\text{ rad}) \approx -0.4282, giving −17.9 m/s-17.9\text{ m/s}). In degree mode, sin⁡(35.0∘)≈0.5736\sin(35.0^\circ) \approx 0.5736, which gives +24.1 m/s+24.1\text{ m/s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly chose the cosine function for the horizontal component and the sine function for the vertical component relative to the horizontal ground.

You correctly substituted the initial speed v0=42.0 m/sv_0 = 42.0\text{ m/s} and the angle value 35.035.0 into both component formulas.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Angle unit mismatch (radian mode used instead of degree mode)

You evaluated cos⁡(35)\cos(35) and sin⁡(35)\sin(35) with your calculator set to radians instead of degrees.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Whenever a projectile launches forward and upward into the first quadrant (0∘<θ<90∘0^\circ < \theta < 90^\circ), both velocity components must be positive. Getting negative values is an immediate signal that the angle measurement mode on your calculator is set to radians (where 35 rad≈11.14π35\text{ rad} \approx 11.14\pi lies in the third quadrant) rather than degrees.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Calculator Angle Mode
  • Ensure the display shows 'DEG' (degrees) whenever evaluating angles given with the degree symbol (∘^\circ).

  • Switch your calculator mode from RAD to DEG before computing trigonometric functions for geometric projectile problems.

Quadrant Sanity Check
  • For an upward and forward launch (0∘<θ<90∘0^\circ < \theta < 90^\circ), both v0x>0v_{0x} > 0 and v0y>0v_{0y} > 0.

  • If you get negative velocity components for a first-quadrant launch, stop immediately and check your calculator mode.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set calculator mode to DEG (degrees).

  2. Compute v0x=42.0×cos⁡(35.0∘)≈42.0×0.8192=34.4 m/sv_{0x} = 42.0 \times \cos(35.0^\circ) \approx 42.0 \times 0.8192 = 34.4\text{ m/s}.

  3. Compute v0y=42.0×sin⁡(35.0∘)≈42.0×0.5736=24.1 m/sv_{0y} = 42.0 \times \sin(35.0^\circ) \approx 42.0 \times 0.5736 = 24.1\text{ m/s}.

Final answer

v0x=34.4 m/sv_{0x} = 34.4\text{ m/s}, v0y=24.1 m/sv_{0y} = 24.1\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Toggle your calculator to DEG mode and recompute 42.0cos⁡(35.0∘)42.0 \cos(35.0^\circ) and 42.0sin⁡(35.0∘)42.0 \sin(35.0^\circ) to confirm the positive values.

  • Perform a quick sign check on every vector component: ask yourself which quadrant the vector points into before writing down the numerical answer.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the elevation angle with the angle measured from the vertical, using 90° - θ = 55.0° in standard formulas.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    θv=90.0∘−35.0∘=55.0∘\theta_v = 90.0^\circ - 35.0^\circ = 55.0^\circ

    Correct

    θ=35.0∘\theta = 35.0^\circ

    The problem explicitly gives the elevation angle above the horizontal as θ=35.0∘\theta = 35.0^\circ. You do not need to subtract from 90.0∘90.0^\circ, because standard component formulas relative to the horizontal axis use the elevation angle directly.

  2. Step 2

    v0x=42.0×cos⁡(55.0∘)  ⟹  v0x=24.1 m/sv_{0x} = 42.0 \times \cos(55.0^\circ) \implies v_{0x} = 24.1\text{ m/s}

    Correct

    v0x=42.0 m/s⋅cos⁡(35.0∘)≈34.4 m/sv_{0x} = 42.0\text{ m/s} \cdot \cos(35.0^\circ) \approx 34.4\text{ m/s}

    You correctly applied the cosine relation for the horizontal adjacent side, but substituting your modified angle of 55.0∘55.0^\circ gave 24.1 m/s24.1\text{ m/s} instead of 34.4 m/s34.4\text{ m/s}.

  3. Step 3

    v0y=42.0×sin⁡(55.0∘)  ⟹  v0y=34.4 m/sv_{0y} = 42.0 \times \sin(55.0^\circ) \implies v_{0y} = 34.4\text{ m/s}

    Correct

    v0y=42.0 m/s⋅sin⁡(35.0∘)≈24.1 m/sv_{0y} = 42.0\text{ m/s} \cdot \sin(35.0^\circ) \approx 24.1\text{ m/s}

    You correctly applied the sine relation for the vertical opposite side, but using 55.0∘55.0^\circ instead of 35.0∘35.0^\circ resulted in 34.4 m/s34.4\text{ m/s} instead of 24.1 m/s24.1\text{ m/s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled that vector components are found using the magnitude multiplied by trigonometric ratios.

You performed your arithmetic and calculator evaluations accurately for the angle you chose.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Angle reference frame confusion

You solved for the complementary angle from the vertical and plugged it into the horizontal-reference formulas, swapping the two velocity components.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You may have assumed that angles in projectile formulas must be measured from the vertical axis, or you routinely convert angles without verifying which axis the given angle already touches. In a right triangle where the angle θ\theta is adjacent to the horizontal ground, the horizontal component is directly v0cos⁡θv_0 \cos\theta and the vertical component is v0sin⁡θv_0 \sin\theta.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the reference axis
  • An angle 'above the horizontal' or an 'elevation angle' is already measured from the xx-axis.

  • Skim the problem statement for 'above horizontal' or 'from ground'. When present, keep that angle as θ\theta without subtracting from 90∘90^\circ.

Match trig ratios to triangle sides
  • cos⁡θ=adjacenthypotenuse\cos\theta = \frac{\text{adjacent}}{\text{hypotenuse}} and sin⁡θ=oppositehypotenuse\sin\theta = \frac{\text{opposite}}{\text{hypotenuse}}.

  • Sketch the right triangle with the launch vector as the hypotenuse. The side touching θ\theta takes cos⁡θ\cos\theta, while the side opposite to θ\theta takes sin⁡θ\sin\theta.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Keep the given angle θ=35.0∘\theta = 35.0^\circ because it is already measured above the horizontal.

  2. Calculate the horizontal component: v0x=v0cos⁡θ=(42.0 m/s)cos⁡(35.0∘)≈34.4 m/sv_{0x} = v_0 \cos\theta = (42.0\text{ m/s}) \cos(35.0^\circ) \approx 34.4\text{ m/s}.

  3. Calculate the vertical component: v0y=v0sin⁡θ=(42.0 m/s)sin⁡(35.0∘)≈24.1 m/sv_{0y} = v_0 \sin\theta = (42.0\text{ m/s}) \sin(35.0^\circ) \approx 24.1\text{ m/s}.

Final answer

v0x=34.4 m/sv_{0x} = 34.4\text{ m/s}, v0y=24.1 m/sv_{0y} = 24.1\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the velocity vector and label the angle directly against the horizontal axis before writing formulas.

  • Perform a quick sanity check: since 35.0∘<45∘35.0^\circ < 45^\circ, the vector lies closer to the horizontal axis, so v0xv_{0x} must be larger than v0yv_{0y}.

Lock it in

Similar question

01

A soccer ball is kicked with an initial speed of v0=25.0 m/sv_0 = 25.0\text{ m/s} at an elevation angle of 30.0∘30.0^\circ above the horizontal ground. Determine the initial horizontal velocity component v0xv_{0x} and vertical velocity component v0yv_{0y}.

Answer

v0x=21.7 m/sv_{0x} = 21.7\text{ m/s}, v0y=12.5 m/sv_{0y} = 12.5\text{ m/s}. The angle is measured from the horizontal, so v0x=v0cos⁡(30.0∘)=25.0⋅0.8660=21.65 m/s≈21.7 m/sv_{0x} = v_0 \cos(30.0^\circ) = 25.0 \cdot 0.8660 = 21.65\text{ m/s} \approx 21.7\text{ m/s}, and v0y=v0sin⁡(30.0∘)=25.0⋅0.5000=12.5 m/sv_{0y} = v_0 \sin(30.0^\circ) = 25.0 \cdot 0.5000 = 12.5\text{ m/s}.

02

A weather balloon rises while being blown by wind. Its velocity vector has a magnitude of 15.0 m/s15.0\text{ m/s} directed at an angle of ϕ=20.0∘\phi = 20.0^\circ relative to the vertical line. Find the horizontal velocity vxv_x and vertical velocity vyv_y.

Answer

vx=5.13 m/sv_x = 5.13\text{ m/s}, vy=14.1 m/sv_y = 14.1\text{ m/s}. Since the angle is measured from the vertical, the vertical side is adjacent and the horizontal side is opposite. Thus, vx=vsin⁡(20.0∘)=15.0⋅0.3420≈5.13 m/sv_x = v \sin(20.0^\circ) = 15.0 \cdot 0.3420 \approx 5.13\text{ m/s} and vy=vcos⁡(20.0∘)=15.0⋅0.9397≈14.1 m/sv_y = v \cos(20.0^\circ) = 15.0 \cdot 0.9397 \approx 14.1\text{ m/s}.

03

An arrow is shot downward from a raised platform at a speed of v0=36.0 m/sv_0 = 36.0\text{ m/s} at an angle of 40.0∘40.0^\circ below the positive horizontal axis. Using standard Cartesian coordinates (positive xx forward, positive yy upward), determine both velocity components (vx,vy)(v_x, v_y).

Answer

vx=27.6 m/sv_x = 27.6\text{ m/s}, vy=−23.1 m/sv_y = -23.1\text{ m/s}. The horizontal component is adjacent to the horizontal axis: vx=v0cos⁡(40.0∘)=36.0⋅0.7660≈27.6 m/sv_x = v_0 \cos(40.0^\circ) = 36.0 \cdot 0.7660 \approx 27.6\text{ m/s}. The vertical component points downward (negative yy-direction) opposite the angle: vy=−v0sin⁡(40.0∘)=−36.0⋅0.6428≈−23.1 m/sv_y = -v_0 \sin(40.0^\circ) = -36.0 \cdot 0.6428 \approx -23.1\text{ m/s}.

Loading workspace…