Resources
A standard double-slit apparatus is illuminated by a beam of monochromatic light of wavelength . The two slits each have an individual width and their centers are separated by a distance . The resulting pattern on a distant viewing screen exhibits both double-slit interference fringes and a single-slit diffraction envelope. (a) Determine the ratio and identify which specific double-slit bright fringe orders are 'missing' (suppressed) due to diffraction zeros. (b) Calculate the total number of complete double-slit bright interference fringes contained entirely within the central diffraction maximum. (c) Calculate the angular half-width of the central diffraction peak in degrees.
Answer and steps
Final answer
(a) , missing orders are ; (b) bright fringes (orders ); (c)
Steps
Part (a): Ratio and Missing Interference Orders
The condition for bright fringes (maxima) in a double-slit interference pattern is:
The condition for dark fringes (minima or diffraction zeros) due to the finite width of each individual slit is:
First, calculate the ratio of the slit separation to the slit width :
A bright interference fringe is "missing" (suppressed) if its position coincides with a diffraction zero at the same diffraction angle . Equating from both conditions:
Solving for the interference order :
Since can be any non-zero integer (), the suppressed orders are:
Part (b): Fringes in the Central Diffraction Maximum
The central diffraction maximum is bounded by the first diffraction minima on either side, corresponding to and .
From Part (a), the first diffraction minimum () exactly coincides with the interference order , causing these two fringes to have zero intensity.
Therefore, the bright interference fringes that lie completely inside the central diffraction envelope are the orders strictly between and :
Counting these orders:
(Pitfall: Do not include the boundary orders , as their intensity is modulated to zero by the diffraction minimum.)
Part (c): Angular Half-Width of the Central Diffraction Peak
The angular half-width is defined as the angle from the central axis () to the first single-slit diffraction minimum ():
Substitute the given values into the equation:
Taking the inverse sine:
Typical errors
01 The student forgets to subtract the two missing boundary orders at m = ±5 from the 2(d/a) span, erroneously counting 2(d/a) + 1 = 11 fringes.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The central diffraction maximum is bounded by the first diffraction minimum at , which falls exactly at . Because these boundary interference orders are completely extinguished by the diffraction zeros, only the strictly interior orders are visible.
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou calculated the ratio accurately.
You correctly identified the missing double-slit interference orders as multiples of 5.
You set up and computed the angular half-width using the single-slit condition correctly.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used the inclusive formula instead of excluding the two missing boundary fringes at .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the boundaries of the central diffraction envelope as visible fringes, overlooking that the envelope reaches zero intensity at those exact points () and therefore eliminates those fringes.
REASONING PATH
Your ACEpath teacher’s suggested approach- Diffraction Zero Suppression
If an interference maximum falls at a diffraction minimum ( and ), its intensity is modulated to zero and the fringe is absent.
When counting visible fringes inside the central peak, strictly exclude the boundary orders .
CORRECTED PATH
ACEpath Teacher's DemonstrationThe first diffraction zeros occur at , which corresponds to .
This means the fringes at and have zero intensity and do not appear on the screen.
The visible bright fringes inside the central peak are therefore restricted to .
Count the valid integer orders: .
02 The student uses the slit separation d instead of the slit width a to calculate the diffraction envelope half-width, confounding interference fringe spacing with diffraction peak width.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
m = 5 m = 0, 1, 2, 3, 4 = 2(4) + 1 = 9
- Step 3
\sin_0 = = = 0.009817 _0 = \arcsin(0.009817) 0.56^
Correct\sin_0 = = 0.049083 _0 = \arcsin(0.049083) 2.81^
You used the slit separation in the diffraction formula. The single-slit diffraction envelope is determined by the slit width , which gives .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the ratio of slit separation to slit width as .
You recognized that orders matching are suppressed by single-slit diffraction zeros.
You correctly counted the bright interference fringes strictly inside the central envelope without including the missing boundary fringes.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated the spatial parameters of the apparatus: the slit separation governs the close interference fringe spacing (), whereas the slit width governs the wider single-slit diffraction envelope ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Slit width $a$ vs. Slit separation $d$
Diffraction effects (the broad envelope) are governed by the slit width (). Interference fringes (the fine bright and dark bands) are governed by the center-to-center distance between the slits ().
Whenever you calculate the width or angular position of the diffraction envelope, always use slit width in the denominator.
CORRECTED PATH
ACEpath Teacher's DemonstrationState the first single-slit diffraction minimum condition: .
Substitute the slit width and : .
Take the inverse sine: .
03 The student counts only the bright fringes on one side plus the central maximum, neglecting the negative-order fringes on the other side.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
m = 0, 1, 2, 3, 4 = 5
Correctm = 0, 1, 2, 3, 4 N = 2(4) + 1 = 9
You counted only the central maximum and the positive orders (). Because the pattern is symmetric across the central axis, you must also count the negative orders (), giving a total of bright fringes.
- Step 3
\sin_0 = = = 0.04908 _0 = \arcsin(0.04908) 2.81^
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the ratio and identified the suppressed interference orders.
You accurately identified that orders coincide with the diffraction envelope zeros.
You applied the diffraction half-width formula and converted the angle to degrees accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou counted only the positive side and the central fringe, forgetting that diffraction patterns are symmetric with fringes on both sides ( and ).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the highest single-side order number with the total fringe count, without accounting for bilateral symmetry: .
REASONING PATH
Your ACEpath teacher’s suggested approach- Symmetric Pattern Counting
The central diffraction envelope extends from the first minimum at to . Interference fringes appear symmetrically on both sides of the central peak ().
When counting bright fringes within an envelope bounded by , include both positive and negative orders: .
CORRECTED PATH
ACEpath Teacher's DemonstrationBecause the interference pattern is symmetric about the central maximum (), negative orders are also present on the screen: .
The complete set of visible bright fringes is .
Sum the count: fringes.
Total number of fringes = 9
Lock it in
What happens to a double-slit interference bright fringe if its angle coincides with a single-slit diffraction minimum?
The fringe is suppressed (missing) because the diffraction envelope modulates its intensity to zero.
Similar question
A double-slit apparatus has slit separation and slit width . (a) Find the ratio . (b) How many complete bright interference fringes appear inside the central diffraction envelope?
Answer
(a) . (b) The boundary orders fall on the first diffraction zeros (), so visible orders are . Total count = .
In a double-slit experiment, exactly complete bright interference fringes are observed inside the central diffraction maximum, with the orders being missing. Determine the ratio of slit separation to slit width, , and state which orders are suppressed in the first secondary diffraction maximum.
Answer
Since are the first missing orders, . In the first secondary diffraction maxima (), the suppressed orders occur at .
A double-slit system has . (a) Are there any missing orders? (b) How many bright interference fringes lie inside the central diffraction maximum?
Answer
(a) Since , missing orders occur when , which is an integer only for even . Thus the first missing orders occur at , giving . (b) The first diffraction minimum is at , corresponding to an interference coordinate of . Since must be an integer and no integer fringe falls exactly on , the fringes inside the central peak are . Total count = .