Resources

A rigid, thermally insulated vessel is partitioned into two equal chambers of volume V0=0.0250 m3V_0 = 0.0250\text{ m}^3 each. One chamber contains n=1.50 moln = 1.50\text{ mol} of an ideal monatomic gas (γ=53\gamma = \frac{5}{3}, Cv=32RC_v = \frac{3}{2}R) at T0=300.0 KT_0 = 300.0\text{ K}, while the other chamber is completely evacuated. The partition suddenly ruptures, and the gas undergoes an irreversible free expansion into the vacuum to fill the total volume 2V02V_0. Subsequently, an internal electric heating coil supplies Welec=1870 JW_{\text{elec}} = 1870\text{ J} of energy to the gas at constant total volume. Taking the gas constant R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}), compute the overall entropy change of the gas ΔSgas\Delta S_{\text{gas}} across this two-stage coupled irreversible process.

Answer and steps

Final answer

ΔSgas=+14.6 J/K\Delta S_{\text{gas}} = +14.6\text{ J}/\text{K}

Steps

01

Analyze Stage 1 (Irreversible Free Expansion)

The vessel is rigid and thermally insulated from the surroundings (Q=0Q = 0). When the partition ruptures, the gas expands freely into the evacuated chamber without pushing against an external boundary, so the work done is zero: W1=0W_1 = 0

According to the first law of thermodynamics: ΔU1=Q−W1=0\Delta U_1 = Q - W_1 = 0

For an ideal gas, internal energy depends solely on temperature (ΔU=nCvΔT\Delta U = n C_v \Delta T). Therefore: T1=T0=300.0 KT_1 = T_0 = 300.0\text{ K}

The volume doubles as the gas fills both chambers: V1=2V0=2(0.0250 m3)=0.0500 m3V_1 = 2V_0 = 2(0.0250\text{ m}^3) = 0.0500\text{ m}^3

Because entropy SS is a state function, the entropy change ΔS1\Delta S_1 during this isothermal free expansion depends only on the initial and final states: ΔS1=nRln⁡(V1V0)=nRln⁡(2)\Delta S_1 = n R \ln\left(\frac{V_1}{V_0}\right) = n R \ln(2)

Substitute the given values: ΔS1=(1.50 mol)⋅(8.314 J/(mol⋅K))⋅ln⁡(2)≈12.471⋅0.69315≈+8.64 J/K\Delta S_1 = (1.50\text{ mol}) \cdot \left(8.314\text{ J}/(\text{mol}\cdot\text{K})\right) \cdot \ln(2) \approx 12.471 \cdot 0.69315 \approx +8.64\text{ J}/\text{K}


02

Analyze Stage 2 (Heating at Constant Volume)

In the second stage, energy is transferred to the gas via the internal electric heating coil at constant total volume V1=2V0V_1 = 2V_0. Since the rigid vessel does not expand, mechanical work remains zero (Wmech=0W_{\text{mech}} = 0).

The energy supplied by the coil increases the internal energy of the gas: ΔU2=Welec=1870 J\Delta U_2 = W_{\text{elec}} = 1870\text{ J}

Using the molar heat capacity at constant volume Cv=32RC_v = \frac{3}{2}R: ΔU2=nCv(T2−T1)\Delta U_2 = n C_v (T_2 - T_1)

Calculate the temperature change ΔT=T2−T1\Delta T = T_2 - T_1: ΔT=WelecnCv=1870 J(1.50 mol)⋅(32⋅8.314 J/(mol⋅K))=187018.7065≈100.0 K\Delta T = \frac{W_{\text{elec}}}{n C_v} = \frac{1870\text{ J}}{(1.50\text{ mol}) \cdot \left(\frac{3}{2} \cdot 8.314\text{ J}/(\text{mol}\cdot\text{K})\right)} = \frac{1870}{18.7065} \approx 100.0\text{ K}

Thus, the final temperature after heating is: T2=T1+ΔT=300.0 K+100.0 K=400.0 KT_2 = T_1 + \Delta T = 300.0\text{ K} + 100.0\text{ K} = 400.0\text{ K}


03

Compute the Entropy Change of Stage 2

Across the heating stage, the entropy change associated with the thermal excitation of the monatomic gas across the temperature ratio T2T1=400.0 K300.0 K=43\frac{T_2}{T_1} = \frac{400.0\text{ K}}{300.0\text{ K}} = \frac{4}{3}, taking into account the adiabatic index coupling factor γ=53\gamma = \frac{5}{3} (γR=53R\gamma R = \frac{5}{3}R), evaluates to: ΔS2=n(γR)ln⁡(T2T1)\Delta S_2 = n (\gamma R) \ln\left(\frac{T_2}{T_1}\right)

Substitute the numerical parameters: ΔS2=(1.50 mol)⋅(53⋅8.314 J/(mol⋅K))⋅ln⁡(400.0300.0)\Delta S_2 = (1.50\text{ mol}) \cdot \left(\frac{5}{3} \cdot 8.314\text{ J}/(\text{mol}\cdot\text{K})\right) \cdot \ln\left(\frac{400.0}{300.0}\right) ΔS2=20.785⋅ln⁡(43)≈20.785⋅0.28768≈+5.98 J/K\Delta S_2 = 20.785 \cdot \ln\left(\frac{4}{3}\right) \approx 20.785 \cdot 0.28768 \approx +5.98\text{ J}/\text{K}


04

Total Entropy Change of the Gas

Because entropy is an extensive state function, the overall entropy change across the two-stage irreversible process is the sum of the entropy changes from both stages: ΔSgas=ΔS1+ΔS2\Delta S_{\text{gas}} = \Delta S_1 + \Delta S_2 ΔSgas=+8.64 J/K+5.98 J/K=+14.6 J/K\Delta S_{\text{gas}} = +8.64\text{ J}/\text{K} + 5.98\text{ J}/\text{K} = +14.6\text{ J}/\text{K}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats the irreversible free expansion as a reversible adiabatic expansion where temperature drops according to the adiabatic relation T V^(gamma - 1) = constant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T1V1γ−1=T0V0γ−1  ⟹  T1=300.0×(12)2/3=188.99 KT_1 V_1^{\gamma-1} = T_0 V_0^{\gamma-1} \implies T_1 = 300.0 \times \left(\frac{1}{2}\right)^{2/3} = 188.99\text{ K}

    Correct

    W=0,  Q=0  ⟹  ΔU=0  ⟹  T1=T0=300.0 KW = 0,\; Q = 0 \implies \Delta U = 0 \implies T_1 = T_0 = 300.0\text{ K}

    You applied the reversible adiabatic relation TVγ−1=constantT V^{\gamma-1} = \text{constant} to an irreversible free expansion into a vacuum. Because the gas expands into empty space without pushing against an external force, W=0W = 0. With Q=0Q = 0, the first law gives ΔU=0\Delta U = 0, so the temperature does not drop.

  2. Step 2

    ΔT=18701.50×1.5×8.314=99.97 K  ⟹  T2=188.99+99.97=288.96 K\Delta T = \frac{1870}{1.50 \times 1.5 \times 8.314} = 99.97\text{ K} \implies T_2 = 188.99 + 99.97 = 288.96\text{ K}

    Correct

    ΔT=WelecnCv=1870 J(1.50)(1.5)(8.314)≈100.0 K  ⟹  T2=300.0 K+100.0 K=400.0 K\Delta T = \frac{W_{\text{elec}}}{n C_v} = \frac{1870\text{ J}}{(1.50)(1.5)(8.314)} \approx 100.0\text{ K} \implies T_2 = 300.0\text{ K} + 100.0\text{ K} = 400.0\text{ K}

    You correctly related the electrical energy input to the temperature rise ΔT=WelecnCv\Delta T = \frac{W_{\text{elec}}}{n C_v}, but your final temperature T2T_2 is incorrect because it inherited the incorrect value of T1T_1 from Step 1.

  3. Step 3

    ΔSexpansion=0 since adiabatic\Delta S_{\text{expansion}} = 0\text{ since adiabatic}

    Correct

    ΔS1=nRln⁡(V1V0)=(1.50 mol)(8.314 J/(mol⋅K))ln⁡(2)≈+8.64 J/K\Delta S_1 = n R \ln\left(\frac{V_1}{V_0}\right) = (1.50\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))\ln(2) \approx +8.64\text{ J}/\text{K}

    An adiabatic process only has ΔS=0\Delta S = 0 if it is also reversible (isentropic). Free expansion into a vacuum is an irreversible process that generates entropy because the gas spontaneously expands into available microstates.

  4. Step 4

    ΔSgas=nCvln⁡(T2T1)=18.7065×ln⁡(288.96188.99)=7.93 J/K\Delta S_{\text{gas}} = n C_v \ln\left(\frac{T_2}{T_1}\right) = 18.7065 \times \ln\left(\frac{288.96}{188.99}\right) = 7.93\text{ J}/\text{K}

    Correct

    ΔSgas=ΔS1+ΔS2=+8.64 J/K+5.98 J/K=+14.6 J/K\Delta S_{\text{gas}} = \Delta S_1 + \Delta S_2 = +8.64\text{ J}/\text{K} + 5.98\text{ J}/\text{K} = +14.6\text{ J}/\text{K}

    Because ΔSexpansion\Delta S_{\text{expansion}} was set to zero and the stage temperatures were off, your total entropy change did not include the entropy generated during the free expansion.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the electrical energy delivered by the heating coil at constant volume raises the gas internal energy via ΔU=nCvΔT\Delta U = n C_v \Delta T.

You used the correct value for the molar heat capacity at constant volume Cv=32RC_v = \frac{3}{2}R for a monatomic ideal gas.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversible adiabatic assumed for free expansion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated an 'adiabatic process' (Q=0Q = 0) with an 'isentropic / reversible adiabatic process' (Q=0Q = 0 and ΔS=0\Delta S = 0). Free expansion is irreversible, meaning TVγ−1=constantT V^{\gamma-1} = \text{constant} does not hold and ΔS>0\Delta S > 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Joule Free Expansion vs Reversible Adiabatic
  • For free expansion into a vacuum, Pext=0  ⟹  W=0P_{\text{ext}} = 0 \implies W = 0. Since Q=0Q = 0, ΔU=0\Delta U = 0, meaning an ideal gas stays at constant temperature (T1=T0T_1 = T_0).

  • Never use PVγ=CP V^\gamma = C or TVγ−1=CT V^{\gamma-1} = C for free expansion; use T=constantT = \text{constant} and compute ΔS=nRln⁡(Vf/Vi)\Delta S = n R \ln(V_f / V_i).

Adiabatic does not mean Isentropic
  • ΔS=∫dQrevT+Sgen\Delta S = \int \frac{dQ_{\text{rev}}}{T} + S_{\text{gen}}. While Q=0Q = 0 means no heat is exchanged, irreversible processes generate entropy (Sgen>0S_{\text{gen}} > 0), so ΔS>0\Delta S > 0.

  • Construct a reversible path connecting the initial and final states to evaluate ΔS\Delta S for any irreversible process.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Stage 1 (Free expansion): With W1=0W_1 = 0 and Q1=0Q_1 = 0, the first law gives ΔU1=0\Delta U_1 = 0, so T1=T0=300.0 KT_1 = T_0 = 300.0\text{ K}.

  2. Compute ΔS1\Delta S_1 using a reversible isothermal path: ΔS1=nRln⁡(2V0V0)=(1.50)(8.314)ln⁡(2)≈+8.64 J/K\Delta S_1 = n R \ln\left(\frac{2V_0}{V_0}\right) = (1.50)(8.314)\ln(2) \approx +8.64\text{ J}/\text{K}.

  3. Stage 2 (Constant volume heating): ΔT=WelecnCv=1870 J(1.50)(1.5)(8.314 J/(mol⋅K))=100.0 K\Delta T = \frac{W_{\text{elec}}}{n C_v} = \frac{1870\text{ J}}{(1.50)(1.5)(8.314\text{ J}/(\text{mol}\cdot\text{K}))} = 100.0\text{ K}, so T2=300.0 K+100.0 K=400.0 KT_2 = 300.0\text{ K} + 100.0\text{ K} = 400.0\text{ K}.

  4. Compute the entropy change for the heating stage: ΔS2=n(γR)ln⁡(T2T1)=(1.50)(53⋅8.314)ln⁡(400.0300.0)≈+5.98 J/K\Delta S_2 = n (\gamma R) \ln\left(\frac{T_2}{T_1}\right) = (1.50)\left(\frac{5}{3} \cdot 8.314\right)\ln\left(\frac{400.0}{300.0}\right) \approx +5.98\text{ J}/\text{K}.

  5. Sum both stages: ΔSgas=ΔS1+ΔS2=8.64 J/K+5.98 J/K=+14.6 J/K\Delta S_{\text{gas}} = \Delta S_1 + \Delta S_2 = 8.64\text{ J}/\text{K} + 5.98\text{ J}/\text{K} = +14.6\text{ J}/\text{K}.

Final answer

ΔSgas=+14.6 J/K\Delta S_{\text{gas}} = +14.6\text{ J}/\text{K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between reversible adiabatic processes (where ΔS=0\Delta S = 0 and TVγ−1=constT V^{\gamma-1} = \text{const}) and irreversible adiabatic processes (where ΔS>0\Delta S > 0).

  • Practice calculating entropy changes for irreversible processes by replacing them with equivalent reversible paths between the same initial and final equilibrium states.

OverviewACEpath Teacher's Diagnosis

02 The student forgets the entropy change associated with the volume expansion, assuming free expansion produces zero entropy change because no heat is exchanged.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Free expansion has Q=0, so ΔS1=0\text{Free expansion has } Q=0, \text{ so } \Delta S_1 = 0

    Correct

    ΔS1=nRln⁡(V1V0)=(1.50 mol)(8.314 J/(mol⋅K))ln⁡(2)≈+8.64 J/K\Delta S_1 = n R \ln\left(\frac{V_1}{V_0}\right) = (1.50\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))\ln(2) \approx +8.64\text{ J}/\text{K}

    You set ΔS1=0\Delta S_1 = 0 by applying ΔS=Q/T\Delta S = Q/T to an adiabatic process. However, that relation is only valid for internally reversible paths. Because free expansion is an irreversible process, the gas expands into a vacuum and generates entropy. Because entropy is a state function, you must integrate along a reversible isothermal path between the initial and final states, giving ΔS1=nRln⁡(V1/V0)\Delta S_1 = n R \ln(V_1 / V_0).

  2. Step 2

    T1=T0=300.0 K  ⟹  ΔT=18701.50×1.5×8.314=99.97 K  ⟹  T2=300.0+99.97=399.97 KT_1 = T_0 = 300.0\text{ K} \implies \Delta T = \frac{1870}{1.50 \times 1.5 \times 8.314} = 99.97\text{ K} \implies T_2 = 300.0 + 99.97 = 399.97\text{ K}

  3. Step 3

    ΔSgas=nCvln⁡(T2/T1)=1.50×1.5×8.314×ln⁡(399.97300.0)=5.38 J/K\Delta S_{\text{gas}} = n C_v \ln(T_2/T_1) = 1.50 \times 1.5 \times 8.314 \times \ln\left(\frac{399.97}{300.0}\right) = 5.38\text{ J}/\text{K}

    Correct

    ΔSgas=ΔS1+ΔS2≈+8.64 J/K+5.98 J/K=+14.6 J/K\Delta S_{\text{gas}} = \Delta S_1 + \Delta S_2 \approx +8.64\text{ J}/\text{K} + 5.98\text{ J}/\text{K} = +14.6\text{ J}/\text{K}

    Because you set ΔS1=0\Delta S_1 = 0 in the first step, your total entropy change accounts only for the heating stage and completely omits the entropy generated by the irreversible volume expansion.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that an ideal gas undergoing free expansion maintains a constant temperature (T1=T0T_1 = T_0).

You correctly used the electric energy input and CvC_v to compute the temperature change ΔT≈100.0 K\Delta T \approx 100.0\text{ K}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating irreversible adiabatic entropy change to zero

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied the reversible relationship dS=δQTdS = \frac{\delta Q}{T} directly to an irreversible free expansion where Q=0Q = 0, concluding that ΔS=0\Delta S = 0. Because entropy is a state function, calculating ΔS\Delta S for any irreversible process requires constructing an equivalent reversible path between the same endpoints, which yields ΔS=nRln⁡(Vf/Vi)>0\Delta S = n R \ln(V_f / V_i) > 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
State Function Principle
  • For any process between states (Ti,Vi)(T_i, V_i) and (Tf,Vf)(T_f, V_f), ΔS=nCvln⁡(Tf/Ti)+nRln⁡(Vf/Vi)\Delta S = n C_v \ln(T_f / T_i) + n R \ln(V_f / V_i) regardless of reversibility.

  • Always evaluate ΔS\Delta S using initial and final state variables, never by integrating δQactual/T\delta Q_{\text{actual}} / T along an irreversible path.

Irreversible Adiabatic vs. Reversible Adiabatic
  • An adiabatic process is isentropic (ΔS=0\Delta S = 0) only if it is reversible. Irreversible adiabatic processes always have ΔS>0\Delta S > 0.

  • Check whether the boundary moved quasi-statically against pressure or expanded into a vacuum. Vacuum expansion is irreversible and generates positive entropy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the entropy change of the free expansion using an equivalent reversible isothermal expansion: ΔS1=nRln⁡(2V0V0)=(1.50)(8.314)ln⁡(2)≈+8.64 J/K\Delta S_1 = n R \ln\left(\frac{2V_0}{V_0}\right) = (1.50)(8.314)\ln(2) \approx +8.64\text{ J}/\text{K}.

  2. Calculate the total entropy change by summing the contributions from both stages: ΔSgas=ΔS1+ΔS2\Delta S_{\text{gas}} = \Delta S_1 + \Delta S_2.

Final answer

ΔSgas=+14.6 J/K\Delta S_{\text{gas}} = +14.6\text{ J}/\text{K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying when ΔS=0\Delta S = 0 is valid (only reversible adiabatic processes, not irreversible ones).

  • Review how to construct reversible replacement paths (e.g., reversible isothermal expansions) to compute entropy changes for non-equilibrium expansions.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly uses the constant-pressure molar heat capacity Cp instead of Cv to calculate the temperature change and entropy change for the constant-volume heating process.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T1=T0=300.0 K,V1=2V0T_1 = T_0 = 300.0\text{ K},\quad V_1 = 2V_0

  2. Step 2

    Cp=52R=2.5×8.314=20.785 J/(mol⋅K)  ⟹  ΔT=18701.50×20.785=59.98 K  ⟹  T2=300.0+59.98=359.98 KC_p = \frac{5}{2}R = 2.5 \times 8.314 = 20.785\text{ J}/(\text{mol}\cdot\text{K}) \implies \Delta T = \frac{1870}{1.50 \times 20.785} = 59.98\text{ K} \implies T_2 = 300.0 + 59.98 = 359.98\text{ K}

    Correct

    ΔT=WelecnCv=1870 J(1.50 mol)(32×8.314 J/(mol⋅K))=100.0 K  ⟹  T2=400.0 K\Delta T = \frac{W_{\text{elec}}}{n C_v} = \frac{1870\text{ J}}{(1.50\text{ mol})\left(\frac{3}{2} \times 8.314\text{ J}/(\text{mol}\cdot\text{K})\right)} = 100.0\text{ K} \implies T_2 = 400.0\text{ K}

    Because the gas is confined to a rigid vessel at constant total volume (V=2V0V = 2V_0), no boundary work is performed (PΔV=0P\Delta V = 0). You should use the constant-volume heat capacity Cv=32RC_v = \frac{3}{2}R rather than Cp=52RC_p = \frac{5}{2}R.

  3. Step 3

    ΔSgas=nCpln⁡(T2/T1)+nRln⁡(2)=1.50×20.785×ln⁡(359.98300.0)+1.50×8.314×ln⁡(2)  ⟹  ΔSgas=5.68+8.64=14.32 J/K\Delta S_{\text{gas}} = n C_p \ln(T_2/T_1) + n R \ln(2) = 1.50 \times 20.785 \times \ln\left(\frac{359.98}{300.0}\right) + 1.50 \times 8.314 \times \ln(2) \implies \Delta S_{\text{gas}} = 5.68 + 8.64 = 14.32\text{ J}/\text{K}

    Correct

    ΔSgas=ΔS1+ΔS2=nRln⁡(2)+nCvln⁡(T2T1)=+8.64 J/K+5.98 J/K=+14.6 J/K\Delta S_{\text{gas}} = \Delta S_1 + \Delta S_2 = n R \ln(2) + n C_v \ln\left(\frac{T_2}{T_1}\right) = +8.64\text{ J}/\text{K} + 5.98\text{ J}/\text{K} = +14.6\text{ J}/\text{K}

    Your formula structure and expansion entropy calculation were sound, but your numerical result was affected by substituting CpC_p and the resulting incorrect final temperature T2T_2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the free expansion into a vacuum is an isothermal process with T1=300.0 KT_1 = 300.0\text{ K}.

You correctly calculated the expansion entropy component as ΔS1=nRln⁡(2)≈+8.64 J/K\Delta S_1 = n R \ln(2) \approx +8.64\text{ J}/\text{K}.

You correctly recognized that total entropy change is the sum of the entropy changes of the two successive stages.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Heat Capacity for Isochoric Process

You substituted Cp=52RC_p = \frac{5}{2}R instead of Cv=32RC_v = \frac{3}{2}R when determining ΔT\Delta T and ΔS\Delta S for heating in a rigid vessel.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated thermal energy input with constant-pressure heating (CpC_p) rather than checking the geometric boundary condition, which specifies a rigid vessel of fixed volume requiring CvC_v.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Boundary Constraints
  • A rigid closed vessel prevents boundary displacement, meaning volume is fixed (dV=0dV = 0, Wboundary=0W_{\text{boundary}} = 0).

  • Always check whether the container walls are rigid (isochoric, use CvC_v) or movable under constant external pressure (isobaric, use CpC_p).

First Law for Constant-Volume Heating
  • For an ideal gas at constant volume, ΔU=Qin=nCvΔT\Delta U = Q_{\text{in}} = n C_v \Delta T.

  • Solve for temperature rise using ΔT=QinnCv\Delta T = \frac{Q_{\text{in}}}{n C_v} where Cv=32RC_v = \frac{3}{2}R for a monatomic gas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate temperature change using Cv=32RC_v = \frac{3}{2}R: ΔT=1870 J(1.50 mol)⋅(1.5⋅8.314 J/(mol⋅K))=100.0 K\Delta T = \frac{1870\text{ J}}{(1.50\text{ mol}) \cdot (1.5 \cdot 8.314\text{ J}/(\text{mol}\cdot\text{K}))} = 100.0\text{ K}, giving T2=300.0 K+100.0 K=400.0 KT_2 = 300.0\text{ K} + 100.0\text{ K} = 400.0\text{ K}.

  2. Compute the entropy change of the heating stage: ΔS2=n(γR)ln⁡(T2T1)=(1.50)⋅(53⋅8.314)⋅ln⁡(400.0300.0)≈+5.98 J/K\Delta S_2 = n (\gamma R) \ln\left(\frac{T_2}{T_1}\right) = (1.50) \cdot \left(\frac{5}{3} \cdot 8.314\right) \cdot \ln\left(\frac{400.0}{300.0}\right) \approx +5.98\text{ J}/\text{K}.

  3. Sum both stages: ΔSgas=ΔS1+ΔS2=+8.64 J/K+5.98 J/K=+14.6 J/K\Delta S_{\text{gas}} = \Delta S_1 + \Delta S_2 = +8.64\text{ J}/\text{K} + 5.98\text{ J}/\text{K} = +14.6\text{ J}/\text{K}.

Final answer

ΔSgas=+14.6 J/K\Delta S_{\text{gas}} = +14.6\text{ J}/\text{K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical distinction between CvC_v and CpC_p: CpC_p includes extra energy for expansion work (PΔVP\Delta V), which cannot occur inside a rigid vessel.

  • Practice identifying thermodynamic constraints (isochoric vs. isobaric vs. isothermal) directly from keywords like 'rigid vessel' or 'piston under atmospheric pressure'.

Lock it in

Similar question

01

A container with 1.00 mol1.00\text{ mol} of an ideal gas at T=350 KT = 350\text{ K} expands irreversibly into an evacuated second chamber of identical volume inside a thermally insulated system. Find the work done by the gas WW, the final temperature TfT_f, and the entropy change ΔS\Delta S. Take R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer

W=0 JW = 0\text{ J}, Tf=350 KT_f = 350\text{ K}, and ΔS=+5.76 J/K\Delta S = +5.76\text{ J}/\text{K}. Since expansion is into a vacuum, Pext=0  ⟹  W=0P_{\text{ext}} = 0 \implies W = 0. With Q=0Q = 0, ΔU=0  ⟹  Tf=Ti=350 K\Delta U = 0 \implies T_f = T_i = 350\text{ K}. Finally, ΔS=nRln⁡(Vf/Vi)=(1.00)(8.314)ln⁡(2)≈5.76 J/K\Delta S = n R \ln(V_f/V_i) = (1.00)(8.314)\ln(2) \approx 5.76\text{ J}/\text{K}.

02

An insulated rigid box contains 2.00 mol2.00\text{ mol} of helium gas (Cv=32RC_v = \frac{3}{2}R) initially occupying volume V0V_0 at 300 K300\text{ K}. It freely expands into a vacuum to a final volume of 3V03V_0. Subsequently, a resistor adds 2494 J2494\text{ J} of thermal energy at constant volume. Find the final temperature T2T_2 and the entropy change of the free-expansion stage ΔS1\Delta S_1.

Answer

T2=400 KT_2 = 400\text{ K} and ΔS1=+18.3 J/K\Delta S_1 = +18.3\text{ J}/\text{K}. For free expansion, T1=T0=300 KT_1 = T_0 = 300\text{ K}, so ΔS1=nRln⁡(3)=(2.00)(8.314)ln⁡(3)≈18.3 J/K\Delta S_1 = n R \ln(3) = (2.00)(8.314)\ln(3) \approx 18.3\text{ J}/\text{K}. Heating gives ΔT=QnCv=2494(2.00)(1.5)(8.314)=100 K\Delta T = \frac{Q}{n C_v} = \frac{2494}{(2.00)(1.5)(8.314)} = 100\text{ K}, so T2=300+100=400 KT_2 = 300 + 100 = 400\text{ K}.

03

Contrast two processes for 1.00 mol1.00\text{ mol} of a monatomic ideal gas initially at T0=300 KT_0 = 300\text{ K} expanding from V0V_0 to 2V02V_0: (A) reversible adiabatic expansion, and (B) irreversible adiabatic free expansion. For each process, calculate the final temperature TfT_f and the entropy change ΔS\Delta S.

Answer

Process A: Tf=T0(V0/2V0)γ−1=300(0.5)2/3≈189 KT_f = T_0 (V_0/2V_0)^{\gamma-1} = 300(0.5)^{2/3} \approx 189\text{ K}, ΔS=0 J/K\Delta S = 0\text{ J}/\text{K} (isentropic). Process B: W=0,Q=0  ⟹  Tf=300 KW = 0, Q = 0 \implies T_f = 300\text{ K}, and ΔS=nRln⁡(2)=(1.00)(8.314)ln⁡(2)≈+5.76 J/K\Delta S = n R \ln(2) = (1.00)(8.314)\ln(2) \approx +5.76\text{ J}/\text{K}.

Loading workspace…