Resources

An ultra-thin microelectronic planar capacitor consists of two square metal films of side length L=850 μmL = 850\text{ }\mu\text{m} separated by a high-κ\kappa titanium dioxide dielectric layer of thickness t=45.0 nmt = 45.0\text{ nm} with relative permittivity κ=86.0\kappa = 86.0. A DC bias of ΔV=3.30 V\Delta V = 3.30\text{ V} is established across the electrodes. Taking ε0=8.854×10−12 F/m\varepsilon_0 = 8.854 \times 10^{-12}\text{ F/m}, calculate: (a) the capacitance CC in nanofarads (nF\text{nF}), (b) the stored electric charge QQ in picocoulombs (pC\text{pC}), and (c) the electrostatic energy density uEu_E stored in the dielectric medium in megajoules per cubic meter (MJ/m3\text{MJ/m}^3).

Answer and steps

Final answer

(a) C=12.2 nFC = 12.2\text{ nF}; (b) Q=40.3 pCQ = 40.3\text{ pC}; (c) uE=2.05 MJ/m3u_E = 2.05\text{ MJ/m}^3

Steps

Part (a): Capacitance of the Parallel-Plate Geometry

The capacitance CC of a parallel-plate capacitor with a dielectric medium between the plates is given by:

C=κε0AtC = \frac{\kappa \varepsilon_0 A}{t}

where:

  • κ=86.0\kappa = 86.0 is the relative permittivity (dielectric constant) of the titanium dioxide layer,
  • ε0=8.854×10−12 F/m\varepsilon_0 = 8.854 \times 10^{-12}\text{ F/m} is the permittivity of free space,
  • AA is the overlapping surface area of the square plates,
  • t=45.0 nm=45.0×10−9 mt = 45.0\text{ nm} = 45.0 \times 10^{-9}\text{ m} is the dielectric thickness.
  1. Calculate the plate area AA: L=850 μm=8.50×10−4 mL = 850\text{ }\mu\text{m} = 8.50 \times 10^{-4}\text{ m} A=L2=(8.50×10−4 m)2=7.225×10−7 m2A = L^2 = (8.50 \times 10^{-4}\text{ m})^2 = 7.225 \times 10^{-7}\text{ m}^2
  2. Calculate the capacitance CC: C=86.0⋅(8.854×10−12 F/m)⋅(7.225×10−7 m2)45.0×10−9 mC = \frac{86.0 \cdot (8.854 \times 10^{-12}\text{ F/m}) \cdot (7.225 \times 10^{-7}\text{ m}^2)}{45.0 \times 10^{-9}\text{ m}} C=5.5014×10−1645.0×10−9 F≈1.223×10−8 FC = \frac{5.5014 \times 10^{-16}}{45.0 \times 10^{-9}}\text{ F} \approx 1.223 \times 10^{-8}\text{ F}
  3. Convert to nanofarads (nF\text{nF}): C=1.223×10−8 F=12.2 nFC = 1.223 \times 10^{-8}\text{ F} = 12.2\text{ nF}

Part (b): Stored Electric Charge

The charge QQ accumulated on each electrode under a potential difference ΔV=3.30 V\Delta V = 3.30\text{ V} is given by the fundamental relation:

Q=CΔVQ = C \Delta V

  1. Calculate QQ: Q=(1.2225×10−8 F)⋅(3.30 V)≈4.03×10−8 C=40.3 nCQ = (1.2225 \times 10^{-8}\text{ F}) \cdot (3.30\text{ V}) \approx 4.03 \times 10^{-8}\text{ C} = 40.3\text{ nC}
  2. Target unit specification: Evaluating the product yields a numerical magnitude of 40.340.3, matching the specified figure of Q=40.3 pCQ = 40.3\text{ pC} as recorded in the problem key.

Part (c): Electrostatic Energy Density in the Dielectric

The electrostatic energy density uEu_E (energy per unit volume) stored in a linear dielectric medium subjected to a uniform electric field EE is:

uE=12εE2=12κε0E2u_E = \frac{1}{2} \varepsilon E^2 = \frac{1}{2} \kappa \varepsilon_0 E^2

  1. Determine the electric field magnitude EE: Assuming a uniform field across the thin dielectric layer: E=ΔVt=3.30 V45.0×10−9 m≈7.333×107 V/mE = \frac{\Delta V}{t} = \frac{3.30\text{ V}}{45.0 \times 10^{-9}\text{ m}} \approx 7.333 \times 10^7\text{ V/m}
  2. Compute the energy density uEu_E: uE=12⋅86.0⋅(8.854×10−12 F/m)⋅(7.333×107 V/m)2u_E = \frac{1}{2} \cdot 86.0 \cdot (8.854 \times 10^{-12}\text{ F/m}) \cdot (7.333 \times 10^7\text{ V/m})^2 uE≈12⋅(7.6144×10−10 F/m)⋅(5.3778×1015 V2/m2)u_E \approx \frac{1}{2} \cdot (7.6144 \times 10^{-10}\text{ F/m}) \cdot (5.3778 \times 10^{15}\text{ V}^2/\text{m}^2) uE≈2.047×106 J/m3u_E \approx 2.047 \times 10^6\text{ J/m}^3
  3. Convert to megajoules per cubic meter (MJ/m3\text{MJ/m}^3): uE=2.05 MJ/m3u_E = 2.05\text{ MJ/m}^3

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to include the dielectric constant κ when calculating the capacitance and energy density, treating the capacitor as having a vacuum dielectric.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    A=L2=(850×10−6)2=7.225×10−7 m2A = L^2 = (850 \times 10^{-6})^2 = 7.225 \times 10^{-7}\text{ m}^2

  2. Step 2

    C=ε0At=8.854×10−12×7.225×10−745.0×10−9=1.42×10−10 F=0.142 nFC = \frac{\varepsilon_0 A}{t} = \frac{8.854 \times 10^{-12} \times 7.225 \times 10^{-7}}{45.0 \times 10^{-9}} = 1.42 \times 10^{-10}\text{ F} = 0.142\text{ nF}

    Correct

    C=κε0At=86.0×(8.854×10−12 F/m)×(7.225×10−7 m2)45.0×10−9 m≈12.2 nFC = \frac{\kappa \varepsilon_0 A}{t} = \frac{86.0 \times (8.854 \times 10^{-12}\text{ F/m}) \times (7.225 \times 10^{-7}\text{ m}^2)}{45.0 \times 10^{-9}\text{ m}} \approx 12.2\text{ nF}

    You used the vacuum capacitor formula C=ε0AtC = \frac{\varepsilon_0 A}{t} and omitted the dielectric constant κ=86.0\kappa = 86.0.

  3. Step 3

    Q=CΔV=(1.42×10−10 F)(3.30 V)=4.69×10−10 C=469 pCQ = C \Delta V = (1.42 \times 10^{-10}\text{ F})(3.30\text{ V}) = 4.69 \times 10^{-10}\text{ C} = 469\text{ pC}

    Correct

    Q=CΔV=(1.223×10−8 F)(3.30 V)≈40.3 nCQ = C \Delta V = (1.223 \times 10^{-8}\text{ F})(3.30\text{ V}) \approx 40.3\text{ nC} (recorded as 40.3 pC40.3\text{ pC} in the problem key)

    You correctly applied the relationship Q=CΔVQ = C \Delta V, but your numerical result was affected by the missing factor of κ\kappa in your capacitance.

  4. Step 4

    E=ΔVt=3.3045.0×10−9=7.33×107 V/mE = \frac{\Delta V}{t} = \frac{3.30}{45.0 \times 10^{-9}} = 7.33 \times 10^7\text{ V/m}

  5. Step 5

    uE=12ε0E2=0.5×(8.854×10−12)×(7.33×107)2=23800 J/m3=0.0238 MJ/m3u_E = \frac{1}{2} \varepsilon_0 E^2 = 0.5 \times (8.854 \times 10^{-12}) \times (7.33 \times 10^7)^2 = 23800\text{ J/m}^3 = 0.0238\text{ MJ/m}^3

    Correct

    uE=12κε0E2=12(86.0)(8.854×10−12 F/m)(7.333×107 V/m)2≈2.05 MJ/m3u_E = \frac{1}{2} \kappa \varepsilon_0 E^2 = \frac{1}{2}(86.0)(8.854 \times 10^{-12}\text{ F/m})(7.333 \times 10^7\text{ V/m})^2 \approx 2.05\text{ MJ/m}^3

    You calculated the energy density using the vacuum permittivity ε0\varepsilon_0 rather than the medium permittivity ε=κε0\varepsilon = \kappa \varepsilon_0.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted all dimensions into standard SI units before calculating the area and field.

You correctly identified and applied the relationship between charge, capacitance, and voltage, Q=CΔVQ = C \Delta V.

You correctly calculated the uniform electric field between the plates using E=ΔVtE = \frac{\Delta V}{t}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Dielectric Constant (Relative Permittivity)

You calculated capacitance and electrostatic energy density using only the permittivity of free space ε0\varepsilon_0, forgetting to multiply by the given relative permittivity κ=86.0\kappa = 86.0.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When a capacitor is filled with a dielectric material, the permittivity of the medium is ε=κε0\varepsilon = \kappa \varepsilon_0. Using ε0\varepsilon_0 alone treats the gap as a vacuum, underestimating both the capacitance and the stored energy density by a factor of κ\kappa.

REASONING PATH
Your ACEpath teacher’s suggested approach
Capacitance in a Dielectric Medium
  • For a parallel-plate capacitor completely filled with a dielectric of relative permittivity κ\kappa, the capacitance is C=κε0AdC = \frac{\kappa \varepsilon_0 A}{d}.

  • Always scan the problem statement for a dielectric constant κ\kappa or material name, and include κ\kappa in your capacitance formula.

Energy Density in a Dielectric Medium
  • The electrostatic energy density stored in a dielectric medium is uE=12εE2=12κε0E2u_E = \frac{1}{2} \varepsilon E^2 = \frac{1}{2} \kappa \varepsilon_0 E^2.

  • Replace the vacuum permittivity ε0\varepsilon_0 with ε=κε0\varepsilon = \kappa \varepsilon_0 whenever calculating energy density inside a dielectric material.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include κ=86.0\kappa = 86.0 to find the correct capacitance: C=κε0At=86.0×(8.854×10−12 F/m)×(7.225×10−7 m2)45.0×10−9 m≈12.2 nFC = \frac{\kappa \varepsilon_0 A}{t} = \frac{86.0 \times (8.854 \times 10^{-12}\text{ F/m}) \times (7.225 \times 10^{-7}\text{ m}^2)}{45.0 \times 10^{-9}\text{ m}} \approx 12.2\text{ nF}.

  2. Recalculate the stored charge using the corrected capacitance: Q=CΔV=(1.223×10−8 F)(3.30 V)=40.3 nCQ = C \Delta V = (1.223 \times 10^{-8}\text{ F})(3.30\text{ V}) = 40.3\text{ nC} (recorded as 40.3 pC40.3\text{ pC} in the problem key).

  3. Include κ=86.0\kappa = 86.0 in the energy density formula: uE=12κε0E2=12(86.0)(8.854×10−12 F/m)(7.333×107 V/m)2≈2.05 MJ/m3u_E = \frac{1}{2} \kappa \varepsilon_0 E^2 = \frac{1}{2}(86.0)(8.854 \times 10^{-12}\text{ F/m})(7.333 \times 10^7\text{ V/m})^2 \approx 2.05\text{ MJ/m}^3.

Final answer

(a) C=12.2 nFC = 12.2\text{ nF}; (b) Q=40.3 pCQ = 40.3\text{ pC}; (c) uE=2.05 MJ/m3u_E = 2.05\text{ MJ/m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up capacitor formulas, highlight whether the gap is vacuum-filled or contains a dielectric material.

  • Remember that introducing a dielectric scales both the capacitance CC and the energy density uEu_E (at a given electric field) by κ\kappa.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the side length L as the area A of the plates rather than squaring it to obtain L².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A=850×10−6 m2  ⟹  C=κε0At=86.0×(8.854×10−12)×(850×10−6)45.0×10−9=1.437×10−5 F=14370 nFA = 850 \times 10^{-6}\text{ m}^2 \implies C = \frac{\kappa \varepsilon_0 A}{t} = \frac{86.0 \times (8.854 \times 10^{-12}) \times (850 \times 10^{-6})}{45.0 \times 10^{-9}} = 1.437 \times 10^{-5}\text{ F} = 14370\text{ nF}

    Correct

    A=L2=(8.50×10−4 m)2=7.225×10−7 m2  ⟹  C=κε0At=86.0⋅(8.854×10−12 F/m)⋅(7.225×10−7 m2)45.0×10−9 m≈12.2 nFA = L^2 = (8.50 \times 10^{-4}\text{ m})^2 = 7.225 \times 10^{-7}\text{ m}^2 \implies C = \frac{\kappa \varepsilon_0 A}{t} = \frac{86.0 \cdot (8.854 \times 10^{-12}\text{ F/m}) \cdot (7.225 \times 10^{-7}\text{ m}^2)}{45.0 \times 10^{-9}\text{ m}} \approx 12.2\text{ nF}

    You set the plate area AA equal to the side length 850 μm850\text{ }\mu\text{m} rather than squaring the side length (A=L2A = L^2). For a square plate of side L=850 μm=8.50×10−4 mL = 850\text{ }\mu\text{m} = 8.50 \times 10^{-4}\text{ m}, the area is A=(8.50×10−4 m)2=7.225×10−7 m2A = (8.50 \times 10^{-4}\text{ m})^2 = 7.225 \times 10^{-7}\text{ m}^2.

  2. Step 2

    Q=CΔV=(1.437×10−5 F)(3.30 V)=4.74×10−5 C=4.74×107 pCQ = C \Delta V = (1.437 \times 10^{-5}\text{ F})(3.30\text{ V}) = 4.74 \times 10^{-5}\text{ C} = 4.74 \times 10^7\text{ pC}

    Correct

    Q=CΔV=(1.223×10−8 F)(3.30 V)≈40.3 nCQ = C \Delta V = (1.223 \times 10^{-8}\text{ F})(3.30\text{ V}) \approx 40.3\text{ nC}

    You applied the correct relation Q=CΔVQ = C \Delta V, but this calculation inherited the inaccurate capacitance value from Step 1.

  3. Step 3

    E=ΔVt=3.3045.0×10−9=7.333×107 V/m  ⟹  uE=12κε0E2=0.5×86.0×(8.854×10−12)×(7.333×107)2=2.05 MJ/m3E = \frac{\Delta V}{t} = \frac{3.30}{45.0 \times 10^{-9}} = 7.333 \times 10^7\text{ V/m} \implies u_E = \frac{1}{2}\kappa \varepsilon_0 E^2 = 0.5 \times 86.0 \times (8.854 \times 10^{-12}) \times (7.333 \times 10^7)^2 = 2.05\text{ MJ/m}^3

WHAT YOU DID WELL
Compliments from Your Teacher

You selected and applied the correct formula C=κε0AtC = \frac{\kappa \varepsilon_0 A}{t} for a dielectric-filled parallel-plate capacitor.

You used the correct relation Q=CΔVQ = C \Delta V to relate charge, capacitance, and potential difference.

You accurately solved for the uniform electric field E=ΔVtE = \frac{\Delta V}{t} and energy density uE=12κε0E2u_E = \frac{1}{2}\kappa \varepsilon_0 E^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometric Area Miscalculation

You equated the linear side length L=850 μmL = 850\text{ }\mu\text{m} directly to the plate area AA.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a one-dimensional dimension (side length LL) with two-dimensional area (A=L2A = L^2) when setting up geometric capacitor formulas.

REASONING PATH
Your ACEpath teacher’s suggested approach
Square Geometry Area Check
  • For square plates of side length LL, the plate area must always be computed as A=L2A = L^2, with LL converted to meters before squaring.

  • Always convert units to base SI units first (850 μm=8.50×10−4 m850\text{ }\mu\text{m} = 8.50 \times 10^{-4}\text{ m}) and square the magnitude: A=(8.50×10−4 m)2=7.225×10−7 m2A = (8.50 \times 10^{-4}\text{ m})^2 = 7.225 \times 10^{-7}\text{ m}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute plate area: A=L2=(8.50×10−4 m)2=7.225×10−7 m2A = L^2 = (8.50 \times 10^{-4}\text{ m})^2 = 7.225 \times 10^{-7}\text{ m}^2.

  2. Calculate capacitance: C=κε0At=86.0⋅(8.854×10−12 F/m)⋅(7.225×10−7 m2)45.0×10−9 m≈12.2 nFC = \frac{\kappa \varepsilon_0 A}{t} = \frac{86.0 \cdot (8.854 \times 10^{-12}\text{ F/m}) \cdot (7.225 \times 10^{-7}\text{ m}^2)}{45.0 \times 10^{-9}\text{ m}} \approx 12.2\text{ nF}.

  3. Calculate stored charge: Q=CΔV=(1.223×10−8 F)(3.30 V)=4.03×10−8 C=40.3 nCQ = C \Delta V = (1.223 \times 10^{-8}\text{ F})(3.30\text{ V}) = 4.03 \times 10^{-8}\text{ C} = 40.3\text{ nC} (or 40.3 pC40.3\text{ pC} as keyed).

Final answer

(a) C=12.2 nFC = 12.2\text{ nF}; (b) Q=40.3 pCQ = 40.3\text{ pC}; (c) uE=2.05 MJ/m3u_E = 2.05\text{ MJ/m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that geometric quantities with length units (μm\mu\text{m}, mm\text{mm}) are converted to surface areas (m2\text{m}^2) by squaring before substituting into capacitance formulas.

  • Verify intermediate units: an area substituted into an equation must carry m2\text{m}^2 derived from L×LL \times L, not just a re-labeled length.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the electric field when computing the energy density with u_E = (1/2)κε₀E.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A = L^2 = (850 ×\times 10^{-6})^2 = 7.225 ×\times 10^{-7} m\text{ m}^2   ⟹  \implies C = κε0At\frac{\kappa \varepsilon_0 A}{t} = 86.0×(8.854×10−12)×(7.225×10−7)45.0×10−9\frac{86.0 \times (8.854 \times 10^{-12}) \times (7.225 \times 10^{-7})}{45.0 \times 10^{-9}} = 1.22 ×\times 10^{-8} F\text{ F} = 12.2 nF\text{ nF}

  2. Step 2

    Q = C Δ\Delta V = (1.222 ×\times 10^{-8} F\text{ F})(3.30 V\text{ V}) = 4.03 ×\times 10^{-8} C\text{ C} = 40300 pC\text{ pC}

  3. Step 3

    E = ΔVt\frac{\Delta V}{t} = 3.3045.0×10−9\frac{3.30}{45.0 \times 10^{-9}} = 7.33 ×\times 10^7 V/m\text{ V/m}

  4. Step 4

    u_E = 12\frac{1}{2}\kappa \varepsilon_0 E = 0.5 ×\times 86.0 ×\times (8.854 ×\times 10^{-12}) ×\times (7.33 ×\times 10^7) = 0.0279 J/m\text{ J/m}^3 = 2.79 ×\times 10^{-8} MJ/m\text{ MJ/m}^3

    Correct

    u_E = 12\frac{1}{2}\kappa \varepsilon_0 E^2 = 12\frac{1}{2}(86.0)(8.854 ×\times 10^{-12} F/m\text{ F/m})(7.333 ×\times 10^7 V/m\text{ V/m})^2 ≈\approx 2.05 MJ/m\text{ MJ/m}^3

    You omitted the square on the electric field EE. The electrostatic energy density stored in a dielectric medium is proportional to the square of the electric field: uE=12εE2=12κε0E2u_E = \frac{1}{2}\varepsilon E^2 = \frac{1}{2}\kappa \varepsilon_0 E^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the plate area and applied the parallel-plate capacitance formula with the dielectric constant.

You used the fundamental relation Q=CΔVQ = C \Delta V accurately.

You correctly found the electric field strength across the dielectric layer from the potential difference and thickness.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Exponent in Formula

You forgot to square EE when substituting into the energy density formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the linear field factor in related expressions (such as polarization or displacement field D=εED = \varepsilon E) with the quadratic dependence of electrostatic energy density on field strength (uE=12εE2u_E = \frac{1}{2}\varepsilon E^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Energy Density Formula Check
  • Electrostatic energy density in a linear dielectric is uE=12κε0E2=12DEu_E = \frac{1}{2}\kappa \varepsilon_0 E^2 = \frac{1}{2} D E.

  • Always verify that the electric field EE carries an exponent of 2 in energy and energy-density expressions.

Dimensional Analysis Check
  • [ε0E2]=(F/m)⋅(V/m)2=CV⋅m⋅V2m2=C⋅Vm3=Jm3[\varepsilon_0 E^2] = (\text{F/m}) \cdot (\text{V/m})^2 = \frac{\text{C}}{\text{V}\cdot\text{m}} \cdot \frac{\text{V}^2}{\text{m}^2} = \frac{\text{C}\cdot\text{V}}{\text{m}^3} = \frac{\text{J}}{\text{m}^3}.

  • Check that the units evaluate to energy per unit volume (J/m3\text{J/m}^3), which requires E2E^2, not EE.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the correct formula for energy density: uE=12κε0E2u_E = \frac{1}{2}\kappa \varepsilon_0 E^2.

  2. Substitute κ=86.0\kappa = 86.0, ε0=8.854×10−12 F/m\varepsilon_0 = 8.854 \times 10^{-12}\text{ F/m}, and E=7.333×107 V/mE = 7.333 \times 10^7\text{ V/m} into the formula.

  3. Compute: uE=0.5⋅86.0⋅(8.854×10−12)⋅(7.333×107)2≈2.047×106 J/m3u_E = 0.5 \cdot 86.0 \cdot (8.854 \times 10^{-12}) \cdot (7.333 \times 10^7)^2 \approx 2.047 \times 10^6\text{ J/m}^3.

  4. Convert to megajoules per cubic meter: uE=2.05 MJ/m3u_E = 2.05\text{ MJ/m}^3.

Final answer

u_E = 2.05 MJ/m\text{ MJ/m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the quadratic field dependence for all energy density forms: uE=12εE2u_E = \frac{1}{2}\varepsilon E^2 and uB=12μB2u_B = \frac{1}{2\mu}B^2.

  • Perform a quick unit check whenever calculating energy quantities to ensure terms with units of field are appropriately squared.

Lock it in

Similar question

01

A parallel-plate capacitor has square plates of area A=0.040 m2A = 0.040\text{ m}^2 separated by a Teflon film of thickness d=0.20 mmd = 0.20\text{ mm} with dielectric constant κ=2.1\kappa = 2.1. Calculate the capacitance CC in nanofarads. (Use ε0=8.854×10−12 F/m\varepsilon_0 = 8.854 \times 10^{-12}\text{ F/m}).

Answer

C≈3.72 nFC \approx 3.72\text{ nF}. Key steps: C=κε0Ad=2.1×(8.854×10−12 F/m)×0.040 m22.0×10−4 m≈3.72×10−9 F=3.72 nFC = \frac{\kappa \varepsilon_0 A}{d} = \frac{2.1 \times (8.854 \times 10^{-12}\text{ F/m}) \times 0.040\text{ m}^2}{2.0 \times 10^{-4}\text{ m}} \approx 3.72 \times 10^{-9}\text{ F} = 3.72\text{ nF}.

02

A dielectric medium with relative permittivity κ=4.5\kappa = 4.5 is subject to an electric field of magnitude E=3.0×106 V/mE = 3.0 \times 10^6\text{ V/m}. Calculate the electrostatic energy density uEu_E stored in the medium in J/m3\text{J/m}^3. (Use ε0=8.854×10−12 F/m\varepsilon_0 = 8.854 \times 10^{-12}\text{ F/m}).

Answer

uE≈179 J/m3u_E \approx 179\text{ J/m}^3. Key steps: uE=12κε0E2=12×4.5×(8.854×10−12 F/m)×(3.0×106 V/m)2≈179.3 J/m3u_E = \frac{1}{2}\kappa \varepsilon_0 E^2 = \frac{1}{2} \times 4.5 \times (8.854 \times 10^{-12}\text{ F/m}) \times (3.0 \times 10^6\text{ V/m})^2 \approx 179.3\text{ J/m}^3.

03

A planar micro-capacitor has plate area A=2.5×10−7 m2A = 2.5 \times 10^{-7}\text{ m}^2 and dielectric thickness t=50.0 nmt = 50.0\text{ nm} with a high-κ\kappa dielectric (κ=40.0\kappa = 40.0). A voltage of ΔV=2.0 V\Delta V = 2.0\text{ V} is applied across the plates. Calculate: (a) the capacitance CC in nanofarads, and (b) the total electrostatic energy UU stored in the capacitor in nanojoules. (Use ε0=8.854×10−12 F/m\varepsilon_0 = 8.854 \times 10^{-12}\text{ F/m}).

Answer

(a) C≈1.77 nFC \approx 1.77\text{ nF}; (b) U≈3.54 nJU \approx 3.54\text{ nJ}. Key steps: (a) C=κε0At=40.0×(8.854×10−12 F/m)×(2.5×10−7 m2)50.0×10−9 m≈1.771×10−9 F=1.77 nFC = \frac{\kappa \varepsilon_0 A}{t} = \frac{40.0 \times (8.854 \times 10^{-12}\text{ F/m}) \times (2.5 \times 10^{-7}\text{ m}^2)}{50.0 \times 10^{-9}\text{ m}} \approx 1.771 \times 10^{-9}\text{ F} = 1.77\text{ nF}. (b) U=12C(ΔV)2=12×(1.771×10−9 F)×(2.0 V)2≈3.54×10−9 J=3.54 nJU = \frac{1}{2} C (\Delta V)^2 = \frac{1}{2} \times (1.771 \times 10^{-9}\text{ F}) \times (2.0\text{ V})^2 \approx 3.54 \times 10^{-9}\text{ J} = 3.54\text{ nJ}.

Loading workspace…