Resources

A robotic lander of mass m=820 kgm = 820\text{ kg} rests on the surface of a spherical asteroid with mass M=2.40×1015 kgM = 2.40 \times 10^{15}\text{ kg} and radius R=8.50×103 mR = 8.50 \times 10^3\text{ m}. The asteroid rotates uniformly about its central axis. Take G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2. (a) Determine the minimum escape speed vescv_{\text{esc}} required for the lander to break free from the asteroid's gravitational field from rest on the surface. (b) Find the critical rotational period TcritT_{\text{crit}} of the asteroid below which loose regolith at the equator would lift off due to the required centripetal acceleration exceeding surface gravity.

Answer and steps

Final answer

(a) vesc=6.14 m/sv_{\text{esc}} = 6.14\text{ m/s}; (b) Tcrit=1.23×104 sT_{\text{crit}} = 1.23 \times 10^4\text{ s} (3.41 h3.41\text{ h})

Steps

Part (a): Minimum Escape Speed

The escape speed vescv_{\text{esc}} is the minimum speed needed for an object to overcome an astronomical body's gravitational pull and reach infinitely far away with zero remaining kinetic energy.

  1. Apply the Conservation of Mechanical Energy: The total mechanical energy EE of the system is the sum of kinetic energy KK and gravitational potential energy UU: E=K+U=12mv2−GMmRE = K + U = \frac{1}{2}mv^2 - \frac{GMm}{R}

    At the threshold of escape, as distance approaches infinity (r→∞r \to \infty), the potential energy vanishes (U→0U \to 0), and the lander can reach this point with negligible kinetic energy (K→0K \to 0): 12mvesc2−GMmR=0\frac{1}{2}mv_{\text{esc}}^2 - \frac{GMm}{R} = 0

  2. Solve for vescv_{\text{esc}}: The mass of the lander mm cancels out: vesc=2GMRv_{\text{esc}} = \sqrt{\frac{2GM}{R}}
  3. Substitute the given values: vesc=2⋅(6.674×10−11 N⋅m2/kg2)⋅(2.40×1015 kg)8.50×103 mv_{\text{esc}} = \sqrt{\frac{2 \cdot (6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2) \cdot (2.40 \times 10^{15}\text{ kg})}{8.50 \times 10^3\text{ m}}} vesc=3.20352×1058.50×103≈37.69≈6.14 m/sv_{\text{esc}} = \sqrt{\frac{3.20352 \times 10^5}{8.50 \times 10^3}} \approx \sqrt{37.69} \approx 6.14\text{ m/s}

Common Pitfall: Remember that escape speed is independent of the mass of the escaping object mm; including mm in the square root is a frequent algebraic mistake.


Part (b): Critical Rotational Period

At the equator of a rotating body, gravity provides the centripetal acceleration necessary to keep an object on the surface, along with an upward normal force FNF_N from the ground.

  1. Set up Newton's Second Law for a mass on the equator: Taking the radially inward direction as positive: GMmregR2−FN=mregac=mregω2R\frac{GMm_{\text{reg}}}{R^2} - F_N = m_{\text{reg}} a_c = m_{\text{reg}} \omega^2 R where ω\omega is the angular speed of the asteroid and mregm_{\text{reg}} is the mass of a loose rock or regolith particle.
  2. Determine the lift-off condition: Loose material begins to lift off when the ground can no longer pull downward on it, which occurs when the normal force drops to zero (FN=0F_N = 0). At this boundary: GMR2=ω2R\frac{GM}{R^2} = \omega^2 R
  3. Relate angular velocity to the rotational period: Since ω=2πT\omega = \dfrac{2\pi}{T}, we have: (2πTcrit)2R=GMR2\left(\frac{2\pi}{T_{\text{crit}}}\right)^2 R = \frac{GM}{R^2} Tcrit=2πR3GMT_{\text{crit}} = 2\pi \sqrt{\frac{R^3}{GM}}
  4. Calculate TcritT_{\text{crit}}: R3=(8.50×103 m)3=6.14125×1011 m3R^3 = (8.50 \times 10^3\text{ m})^3 = 6.14125 \times 10^{11}\text{ m}^3 GM=(6.674×10−11 N⋅m2/kg2)⋅(2.40×1015 kg)≈1.60176×105 m3/s2GM = (6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2) \cdot (2.40 \times 10^{15}\text{ kg}) \approx 1.60176 \times 10^5\text{ m}^3/\text{s}^2 Tcrit=2π6.14125×1011 m31.60176×105 m3/s2≈2π3.834×106 s2T_{\text{crit}} = 2\pi \sqrt{\frac{6.14125 \times 10^{11}\text{ m}^3}{1.60176 \times 10^5\text{ m}^3/\text{s}^2}} \approx 2\pi \sqrt{3.834 \times 10^6\text{ s}^2} Tcrit≈2π⋅1958.1 s≈1.23×104 sT_{\text{crit}} \approx 2\pi \cdot 1958.1\text{ s} \approx 1.23 \times 10^4\text{ s}

    Converting to hours: Tcrit=1.23×104 s3600 s/h≈3.41 hT_{\text{crit}} = \frac{1.23 \times 10^4\text{ s}}{3600\text{ s/h}} \approx 3.41\text{ h}

If the asteroid rotates faster than this (period shorter than 3.41 h3.41\text{ h}), surface gravity is insufficient to provide the necessary centripetal acceleration, causing equatorial material to fly off into space.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the factor of 2 in the escape velocity formula, confusing it with circular orbital speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vesc=GMRv_{\text{esc}} = \sqrt{\frac{GM}{R}}

    Correct

    vesc=2GMRv_{\text{esc}} = \sqrt{\frac{2GM}{R}}

    You wrote the expression for circular orbital speed at the surface rather than the escape speed. Escape speed requires total mechanical energy to be zero (K+U=0  ⟹  12mvesc2−GMmR=0K + U = 0 \implies \frac{1}{2}mv_{\text{esc}}^2 - \frac{GMm}{R} = 0), which yields a factor of 22 inside the square root.

  2. Step 2

    vesc=6.674×10−11×2.40×10158500=1.60176×1058500=18.844≈4.34 m/sv_{\text{esc}} = \sqrt{\frac{6.674 \times 10^{-11} \times 2.40 \times 10^{15}}{8500}} = \sqrt{\frac{1.60176 \times 10^5}{8500}} = \sqrt{18.844} \approx 4.34\text{ m/s}

    Correct

    vesc=2(6.674×10−11)(2.40×1015)8500≈6.14 m/sv_{\text{esc}} = \sqrt{\frac{2(6.674 \times 10^{-11})(2.40 \times 10^{15})}{8500}} \approx 6.14\text{ m/s}

    Your arithmetic and substitution were carried out correctly based on the formula you chose, but the final value is off by a factor of 2\sqrt{2} due to the initial formula error.

  3. Step 3

    GMR2=ω2R  ⟹  ω=2πTcrit  ⟹  Tcrit=2πR3GM\frac{GM}{R^2} = \omega^2 R \implies \omega = \frac{2\pi}{T_{\text{crit}}} \implies T_{\text{crit}} = 2\pi \sqrt{\frac{R^3}{GM}}

  4. Step 4

    Tcrit=2π(8500)36.674×10−11×2.40×1015≈1.23×104 sT_{\text{crit}} = 2\pi \sqrt{\frac{(8500)^3}{6.674 \times 10^{-11} \times 2.40 \times 10^{15}}} \approx 1.23 \times 10^4\text{ s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly modeled the equatorial lift-off condition where the required centripetal acceleration equals surface gravity.

You accurately derived the critical period formula T=2πR3/(GM)T = 2\pi\sqrt{R^3/(GM)} and computed the numerical result in Part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing orbital speed with escape speed

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You selected the formula for surface circular orbital speed v=GM/Rv = \sqrt{GM/R} instead of deriving escape speed from conservation of mechanical energy Ef−Ei=0E_f - E_i = 0, which yields vesc=2GM/Rv_{\text{esc}} = \sqrt{2GM/R}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Derive from Conservation of Energy
  • An escaping body must reach r→∞r \to \infty with E=0E = 0, meaning 12mvesc2−GMmR=0\frac{1}{2}mv_{\text{esc}}^2 - \frac{GMm}{R} = 0.

  • Always include the factor of 22 when solving for escape speed: vesc=2⋅vorb=2GMRv_{\text{esc}} = \sqrt{2} \cdot v_{\text{orb}} = \sqrt{\frac{2GM}{R}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. vesc=2GMRv_{\text{esc}} = \sqrt{\frac{2GM}{R}}

  2. vesc=2×1.60176×1058500=37.688v_{\text{esc}} = \sqrt{\frac{2 \times 1.60176 \times 10^5}{8500}} = \sqrt{37.688}

  3. vesc≈6.14 m/sv_{\text{esc}} \approx 6.14\text{ m/s}

Final answer

(a) vesc≈6.14 m/sv_{\text{esc}} \approx 6.14\text{ m/s}; (b) Tcrit≈1.23×104 sT_{\text{crit}} \approx 1.23 \times 10^4\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember the simple relation vesc=2 vorbv_{\text{esc}} = \sqrt{2}\,v_{\text{orb}} to avoid confusing the two speeds.

  • Re-derive vescv_{\text{esc}} from total mechanical energy K+U=0K + U = 0 whenever you are unsure of the prefactor.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the inverse-square dependence of gravity with centripetal acceleration and writes ω² / R instead of ω² R, resulting in an incorrect critical period.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    12mvesc2=GMmR  ⟹  vesc=2GMR\frac{1}{2}m v_{\text{esc}}^2 = \frac{GMm}{R} \implies v_{\text{esc}} = \sqrt{\frac{2GM}{R}}

  2. Step 2

    vesc=2×6.674×10−11×2.40×10158500=37.688≈6.14 m/sv_{\text{esc}} = \sqrt{\frac{2 \times 6.674 \times 10^{-11} \times 2.40 \times 10^{15}}{8500}} = \sqrt{37.688} \approx 6.14\text{ m/s}

  3. Step 3

    g=ac  ⟹  GMR2=ω2R  ⟹  ω2=GMRg = a_c \implies \frac{GM}{R^2} = \frac{\omega^2}{R} \implies \omega^2 = \frac{GM}{R}

    Correct

    g=ac  ⟹  GMR2=ω2R  ⟹  ω2=GMR3g = a_c \implies \frac{GM}{R^2} = \omega^2 R \implies \omega^2 = \frac{GM}{R^3}

    You used ac=ω2Ra_c = \frac{\omega^2}{R} instead of ac=ω2Ra_c = \omega^2 R. The formula with a denominator of RR uses linear velocity (ac=v2Ra_c = \frac{v^2}{R}), whereas with angular velocity it is ac=ω2Ra_c = \omega^2 R because v=ωRv = \omega R.

  4. Step 4

    Tcrit=2πRGM=2π85001.60176×105≈1.45 sT_{\text{crit}} = 2\pi \sqrt{\frac{R}{GM}} = 2\pi \sqrt{\frac{8500}{1.60176 \times 10^5}} \approx 1.45\text{ s}

    Correct

    Tcrit=2πR3GM=2π(8500)31.60176×105≈1.23×104 sT_{\text{crit}} = 2\pi \sqrt{\frac{R^3}{GM}} = 2\pi \sqrt{\frac{(8500)^3}{1.60176 \times 10^5}} \approx 1.23 \times 10^4\text{ s}

    Your period expression and final numerical value inherited the dimensional error from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied mechanical energy conservation to solve for the escape speed.

You recognized that loose surface regolith lifts off when normal force reaches zero, meaning surface gravity equals the required centripetal acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematic Formula Confusion

You accidentally divided by RR when writing centripetal acceleration in terms of angular velocity instead of multiplying by RR.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the linear velocity form ac=v2Ra_c = \frac{v^2}{R} with the angular velocity form ac=ω2Ra_c = \omega^2 R. Substituting v=ωRv = \omega R into v2R\frac{v^2}{R} yields (ωR)2R=ω2R\frac{(\omega R)^2}{R} = \omega^2 R.

REASONING PATH
Your ACEpath teacher’s suggested approach
Centripetal Acceleration Forms
  • ac=v2R=ω2Ra_c = \frac{v^2}{R} = \omega^2 R

  • Always verify units before solving: ω2R\omega^2 R has units of (rad/s)2⋅m=m/s2(\text{rad/s})^2 \cdot \text{m} = \text{m/s}^2, while ω2R\frac{\omega^2}{R} would have units of s−2/m\text{s}^{-2}/\text{m}, which is not an acceleration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set surface gravity equal to centripetal acceleration: GMR2=ω2R\frac{GM}{R^2} = \omega^2 R.

  2. Solve for angular velocity: ω=GMR3\omega = \sqrt{\frac{GM}{R^3}}.

  3. Relate angular velocity to the period: Tcrit=2πω=2πR3GMT_{\text{crit}} = \frac{2\pi}{\omega} = 2\pi \sqrt{\frac{R^3}{GM}}.

  4. Substitute R=8.50×103 mR = 8.50 \times 10^3\text{ m} and GM=1.60176×105 m3/s2GM = 1.60176 \times 10^5\text{ m}^3/\text{s}^2 to find Tcrit≈1.23×104 sT_{\text{crit}} \approx 1.23 \times 10^4\text{ s} (3.41 h3.41\text{ h}).

Final answer

(a) vesc=6.14 m/sv_{\text{esc}} = 6.14\text{ m/s}; (b) Tcrit=1.23×104 sT_{\text{crit}} = 1.23 \times 10^4\text{ s} (or 3.41 h3.41\text{ h})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between linear speed and angular speed: v=ωrv = \omega r.

  • Perform a quick dimensional analysis on kinematic equations whenever you express circular motion quantities in terms of ω\omega.

OverviewACEpath Teacher's Diagnosis

03 The student squares the asteroid's radius when computing asteroid volume/scale inside the root, using R² instead of R³ in Kepler's third-law relation for the period.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vesc=2GMR⟹vesc=2×6.674×10−11×2.40×10158500⟹vesc≈6.14 m/sv_{\text{esc}} = \sqrt{\frac{2GM}{R}} \Longrightarrow v_{\text{esc}} = \sqrt{\frac{2 \times 6.674 \times 10^{-11} \times 2.40 \times 10^{15}}{8500}} \Longrightarrow v_{\text{esc}} \approx 6.14\text{ m/s}

  2. Step 2

    GMR2=(2πTcrit)2R\frac{GM}{R^2} = \left(\frac{2\pi}{T_{\text{crit}}}\right)^2 R

  3. Step 3

    Tcrit=2πR2GMT_{\text{crit}} = 2\pi \sqrt{\frac{R^2}{GM}}

    Correct

    Tcrit=2πR3GMT_{\text{crit}} = 2\pi \sqrt{\frac{R^3}{GM}}

    When solving GMR2=4π2RT2\frac{GM}{R^2} = \frac{4\pi^2 R}{T^2} for T2T^2, dividing both sides by RR gives GMR3=4π2T2\frac{GM}{R^3} = \frac{4\pi^2}{T^2}, which yields Tcrit=2πR3GMT_{\text{crit}} = 2\pi \sqrt{\frac{R^3}{GM}} rather than R2R^2.

  4. Step 4

    Tcrit=2π(8500)21.60176×105⟹Tcrit=2π7.225×1071.60176×105⟹Tcrit=2π451.07≈133 sT_{\text{crit}} = 2\pi \sqrt{\frac{(8500)^2}{1.60176 \times 10^5}} \Longrightarrow T_{\text{crit}} = 2\pi \sqrt{\frac{7.225 \times 10^7}{1.60176 \times 10^5}} \Longrightarrow T_{\text{crit}} = 2\pi \sqrt{451.07} \approx 133\text{ s}

    Correct

    Tcrit=2π(8500)31.60176×105≈1.23×104 sT_{\text{crit}} = 2\pi \sqrt{\frac{(8500)^3}{1.60176 \times 10^5}} \approx 1.23 \times 10^4\text{ s}

    Your arithmetic follows your rearranged formula accurately, but the resulting numerical value is incorrect due to the missing factor of RR inside the square root.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived and calculated the escape speed in part (a).

You set up the correct physical condition for regolith lift-off by equating gravitational acceleration to centripetal acceleration in part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic rearrangement error (radius power in period formula)

You brought RR from the right-hand side into the radical as R2R^2 instead of combining it with R2R^2 in the denominator to get R3R^3.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A mechanical algebra slip occurred when isolating TT from GMR2=4π2RT2\frac{GM}{R^2} = \frac{4\pi^2 R}{T^2}. Cross-multiplying or tracking powers of RR carefully prevents dropping or misplacing terms.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate squared variables carefully
  • For AR2=B⋅RT2\frac{A}{R^2} = \frac{B\cdot R}{T^2}, cross-multiply to get AT2=BR3A T^2 = B R^3, leading to T2=BR3AT^2 = \frac{B R^3}{A}.

  • Always cross-multiply rational expressions before taking square roots to ensure powers of RR combine correctly.

Dimensional sanity check
  • The expression under the radical for period must have units of s2\text{s}^2.

  • Check dimensions: R3GM\frac{R^3}{GM} has units m3(m3/(kg⋅s2))⋅kg=s2\frac{\text{m}^3}{(\text{m}^3/(\text{kg}\cdot\text{s}^2))\cdot\text{kg}} = \text{s}^2, whereas R2GM\frac{R^2}{GM} has units s2/m\text{s}^2/\text{m}, signaling a missing length dimension.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Cross-multiply GMR2=4π2RTcrit2\frac{GM}{R^2} = \frac{4\pi^2 R}{T_{\text{crit}}^2} to obtain GM⋅Tcrit2=4π2R3GM \cdot T_{\text{crit}}^2 = 4\pi^2 R^3.

  2. Divide by GMGM and take the square root: Tcrit=2πR3GMT_{\text{crit}} = 2\pi \sqrt{\frac{R^3}{GM}}.

  3. Substitute R=8.50×103 mR = 8.50 \times 10^3\text{ m} and GM≈1.60176×105 m3/s2GM \approx 1.60176 \times 10^5\text{ m}^3/\text{s}^2: Tcrit=2π6.14125×10111.60176×105≈2π3.834×106≈1.23×104 sT_{\text{crit}} = 2\pi \sqrt{\frac{6.14125 \times 10^{11}}{1.60176 \times 10^5}} \approx 2\pi \sqrt{3.834 \times 10^6} \approx 1.23 \times 10^4\text{ s}.

Final answer

Tcrit≈1.23×104 s (or 3.41 h)T_{\text{crit}} \approx 1.23 \times 10^4\text{ s}\text{ (or } 3.41\text{ h)}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice dimensional analysis on orbital and rotational formulas to catch misplaced powers of RR.

  • Work through cross-multiplication steps explicitly when variables appear in denominators.

Lock it in

Similar question

01

A spherical moon has a mass of M=7.35×1022 kgM = 7.35 \times 10^{22}\text{ kg} and a radius of R=1.74×106 mR = 1.74 \times 10^6\text{ m}. Using G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2, calculate its surface escape speed vescv_{\text{esc}}.

Answer

vesc=2GMR=2(6.674×10−11)(7.35×1022)1.74×106≈2.37×103 m/sv_{\text{esc}} = \sqrt{\frac{2GM}{R}} = \sqrt{\frac{2(6.674 \times 10^{-11})(7.35 \times 10^{22})}{1.74 \times 10^6}} \approx 2.37 \times 10^3\text{ m/s} (or 2.37 km/s2.37\text{ km/s}).

02

A probe is in a stable circular orbit at radius rr around a planet, traveling at speed v0=4.20 km/sv_0 = 4.20\text{ km/s}. How much additional instantaneous tangential speed Δv\Delta v must be imparted to the probe so that it can escape to infinity?

Answer

To escape from the circular orbit, the probe needs vesc=2 v0v_{\text{esc}} = \sqrt{2}\,v_0. The required speed increment is Δv=vesc−v0=(2−1)v0≈0.414×4.20 km/s≈1.74 km/s\Delta v = v_{\text{esc}} - v_0 = (\sqrt{2} - 1)v_0 \approx 0.414 \times 4.20\text{ km/s} \approx 1.74\text{ km/s}.

03

A rapidly spinning spherical asteroid of uniform density ρ\rho has radius RR. Find an expression for the critical rotation period TcritT_{\text{crit}} below which equatorial surface material flies off, expressing your answer solely in terms of GG and ρ\rho.

Answer

Equating surface gravity to centripetal acceleration gives GMR2=(2πT)2R\frac{GM}{R^2} = \left(\frac{2\pi}{T}\right)^2 R. Substituting M=43πR3ρM = \frac{4}{3}\pi R^3 \rho yields 43πGρ=4π2T2\frac{4}{3}\pi G \rho = \frac{4\pi^2}{T^2}, which simplifies to Tcrit=3πGρT_{\text{crit}} = \sqrt{\frac{3\pi}{G\rho}}. Notably, the critical period is independent of the asteroid's radius RR.

Loading workspace…