Resources

A laser beam with a vacuum wavelength of λ0=632.8 nm\lambda_0 = 632.8\text{ nm} enters a dense flint glass prism where the wave speed drops to v=1.81×108 m/sv = 1.81\times 10^8\text{ m/s}. The wave propagates a spatial distance of d=5.43 cmd = 5.43\text{ cm} within the medium. Determine the total number of wave cycles NN contained along this path, and the wave's temporal period TT in the medium.

Answer and steps

Final answer

N=1.42×105 cyclesN = 1.42\times 10^5\text{ cycles}, T=2.11×10−15 sT = 2.11\times 10^{-15}\text{ s}

Steps

01

Invariance of Frequency and Temporal Period

When a light wave crosses an interface between two media, its oscillations are driven continuously across the boundary. As a result, its frequency ff and temporal period TT remain unchanged regardless of the medium:

T=1f=λ0cT = \frac{1}{f} = \frac{\lambda_0}{c}

where:

  • λ0=632.8 nm=6.328×10−7 m\lambda_0 = 632.8\text{ nm} = 6.328\times 10^{-7}\text{ m} is the wavelength in vacuum,
  • c≈3.00×108 m/sc \approx 3.00\times 10^8\text{ m/s} (more precisely 2.998×108 m/s2.998\times 10^8\text{ m/s}) is the speed of light in vacuum.

Substitute the values to calculate the period TT:

T=6.328×10−7 m2.998×108 m/s≈2.11×10−15 sT = \frac{6.328\times 10^{-7}\text{ m}}{2.998\times 10^8\text{ m/s}} \approx 2.11\times 10^{-15}\text{ s}

Common Pitfall: Do not use the reduced wave speed vv in the medium to compute a new period. The speed decreases because the wavelength shortens (λ=v/f\lambda = v/f), not because the period changes.


02

Wavelength in the Medium

Inside the dense flint glass, the wave travels at speed v=1.81×108 m/sv = 1.81\times 10^8\text{ m/s}. The wavelength λ\lambda in the glass is:

λ=v⋅T\lambda = v \cdot T

λ=(1.81×108 m/s)⋅(2.111×10−15 s)≈3.821×10−7 m=382.1 nm\lambda = (1.81\times 10^8\text{ m/s}) \cdot (2.111\times 10^{-15}\text{ s}) \approx 3.821\times 10^{-7}\text{ m} = 382.1\text{ nm}


03

Number of Wave Cycles along the Path

The total number of full wave cycles NN contained within the path length d=5.43 cm=0.0543 md = 5.43\text{ cm} = 0.0543\text{ m} is the ratio of the distance to the wavelength in that medium:

N=dλN = \frac{d}{\lambda}

N=0.0543 m3.821×10−7 m≈1.42×105 cyclesN = \frac{0.0543\text{ m}}{3.821\times 10^{-7}\text{ m}} \approx 1.42\times 10^5\text{ cycles}

(Alternative check) The time taken for the light to traverse the path is t=dv=0.0543 m1.81×108 m/s=3.00×10−10 st = \frac{d}{v} = \frac{0.0543\text{ m}}{1.81\times 10^8\text{ m/s}} = 3.00\times 10^{-10}\text{ s}. The number of cycles completed in this time is N=tT=3.00×10−10 s2.111×10−15 s≈1.42×105 cyclesN = \frac{t}{T} = \frac{3.00\times 10^{-10}\text{ s}}{2.111\times 10^{-15}\text{ s}} \approx 1.42\times 10^5\text{ cycles}, confirming the result.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the number of wave cycles using the vacuum wavelength instead of the wavelength inside the medium.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    f=cλ0=3.00×108 m/s6.328×10−7 m=4.741×1014 Hz  ⟹  T=1f=2.11×10−15 sf = \frac{c}{\lambda_0} = \frac{3.00\times 10^8\text{ m/s}}{6.328\times 10^{-7}\text{ m}} = 4.741\times 10^{14}\text{ Hz} \implies T = \frac{1}{f} = 2.11\times 10^{-15}\text{ s}

  2. Step 2

    N=dλ0=0.0543 m6.328×10−7 m=8.58×104 cyclesN = \frac{d}{\lambda_0} = \frac{0.0543\text{ m}}{6.328\times 10^{-7}\text{ m}} = 8.58\times 10^4\text{ cycles}

    Correct

    λ=vf=vT=(1.81×108 m/s)(2.111×10−15 s)≈3.821×10−7 m  ⟹  N=dλ=0.0543 m3.821×10−7 m≈1.42×105 cycles\lambda = \frac{v}{f} = vT = (1.81\times 10^8\text{ m/s})(2.111\times 10^{-15}\text{ s}) \approx 3.821\times 10^{-7}\text{ m} \implies N = \frac{d}{\lambda} = \frac{0.0543\text{ m}}{3.821\times 10^{-7}\text{ m}} \approx 1.42\times 10^5\text{ cycles}

    You divided the distance dd by the vacuum wavelength λ0\lambda_0. Because the wave slows down in the glass to v=1.81×108 m/sv = 1.81\times 10^8\text{ m/s} while its frequency stays fixed, its wavelength compresses to λ=v/f≈382.1 nm\lambda = v/f \approx 382.1\text{ nm}. You need to divide the path distance by this in-medium wavelength.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted units for distance (5.43 cm=0.0543 m5.43\text{ cm} = 0.0543\text{ m}) and vacuum wavelength (632.8 nm=6.328×10−7 m632.8\text{ nm} = 6.328\times 10^{-7}\text{ m}).

You correctly related vacuum wave speed, wavelength, and frequency to determine ff.

You correctly computed the temporal period T=2.11×10−15 sT = 2.11\times 10^{-15}\text{ s} as the reciprocal of frequency.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Used vacuum wavelength instead of medium wavelength

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked that the spatial wavelength contracts when light enters an optically denser medium with lower wave speed (λ=v/f<λ0\lambda = v/f < \lambda_0), even though the temporal frequency remains constant.

REASONING PATH
Your ACEpath teacher’s suggested approach
Wavelength in a Medium
  • When a wave enters a medium where its speed changes from cc to vv, frequency ff remains constant, so wavelength changes to λ=vf=λ0n\lambda = \frac{v}{f} = \frac{\lambda_0}{n}.

  • Always compute the local wavelength λ=v/f\lambda = v/f (or λ=λ0vc\lambda = \lambda_0 \frac{v}{c}) before finding spatial cycle counts N=d/λN = d/\lambda inside that medium.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the wavelength inside the dense flint glass: λ=vT=(1.81×108 m/s)(2.111×10−15 s)≈3.821×10−7 m\lambda = v T = (1.81\times 10^8\text{ m/s})(2.111\times 10^{-15}\text{ s}) \approx 3.821\times 10^{-7}\text{ m}.

  2. Divide the distance traveled in the glass by this compressed wavelength: N=dλ=0.0543 m3.821×10−7 m≈1.42×105 cyclesN = \frac{d}{\lambda} = \frac{0.0543\text{ m}}{3.821\times 10^{-7}\text{ m}} \approx 1.42\times 10^5\text{ cycles}.

Final answer

N=1.42×105 cyclesN = 1.42\times 10^5\text{ cycles}, T=2.11×10−15 sT = 2.11\times 10^{-15}\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how wave speed, wavelength, and frequency transform at a boundary between two media.

  • Practice computing the index of refraction n=c/vn = c/v and using λ=λ0/n\lambda = \lambda_0 / n to quickly find the in-medium wavelength.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly assumes wave period scales inversely with speed while assuming wavelength remains constant in the medium.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=cv=3.00×1081.81×108=1.657  ⟹  λ=λ0n=632.8×10−91.657=3.819×10−7 mn = \frac{c}{v} = \frac{3.00\times 10^8}{1.81\times 10^8} = 1.657 \implies \lambda = \frac{\lambda_0}{n} = \frac{632.8\times 10^{-9}}{1.657} = 3.819\times 10^{-7}\text{ m}

  2. Step 2

    N=dλ=0.05433.819×10−7=1.42×105 cyclesN = \frac{d}{\lambda} = \frac{0.0543}{3.819\times 10^{-7}} = 1.42\times 10^5\text{ cycles}

  3. Step 3

    T=λ0v=6.328×10−71.81×108=3.50×10−15 sT = \frac{\lambda_0}{v} = \frac{6.328\times 10^{-7}}{1.81\times 10^8} = 3.50\times 10^{-15}\text{ s}

    Correct

    T=λ0c=λv=6.328×10−7 m2.998×108 m/s≈2.11×10−15 sT = \frac{\lambda_0}{c} = \frac{\lambda}{v} = \frac{6.328\times 10^{-7}\text{ m}}{2.998\times 10^8\text{ m/s}} \approx 2.11\times 10^{-15}\text{ s}

    You paired the vacuum wavelength λ0\lambda_0 with the medium's wave speed vv. Because wave frequency and period are determined by the source and do not change across media, the period is given by T=λ0c=λv≈2.11×10−15 sT = \frac{\lambda_0}{c} = \frac{\lambda}{v} \approx 2.11\times 10^{-15}\text{ s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly determined the refractive index and wavelength inside the medium.

You accurately computed the total number of wave cycles along the given path.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mixed-domain wavelength and velocity mismatch

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You matched the vacuum wavelength λ0\lambda_0 with the medium wave speed vv rather than matching values from the same medium or recognizing that temporal period TT is invariant across media.

REASONING PATH
Your ACEpath teacher’s suggested approach
Frequency & Period Invariance
  • When a wave crosses into a new medium, its frequency ff and period TT remain constant because boundary oscillations must match continuously.

  • Calculate period using vacuum quantities (T=λ0/cT = \lambda_0 / c) or matching medium quantities (T=λ/vT = \lambda / v), never mixing parameters from different media.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that the wave's period TT is determined solely by the source and is invariant: T=1f=λ0cT = \frac{1}{f} = \frac{\lambda_0}{c}.

  2. Alternatively, using parameters within the glass: T=λv=3.819×10−7 m1.81×108 m/s=2.11×10−15 sT = \frac{\lambda}{v} = \frac{3.819\times 10^{-7}\text{ m}}{1.81\times 10^8\text{ m/s}} = 2.11\times 10^{-15}\text{ s}.

Final answer

N=1.42×105 cyclesN = 1.42\times 10^5\text{ cycles}, T=2.11×10−15 sT = 2.11\times 10^{-15}\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that temporal quantities (f,T,ωf, T, \omega) never change when entering a new linear medium.

  • Ensure your wave equation ratio v/λ=fv / \lambda = f always pairs speed and wavelength defined within the exact same medium.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies the vacuum wavelength by the refractive index rather than dividing, leading to an erroneously long wavelength in the medium.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=cv=3.00×1081.81×108=1.657n = \frac{c}{v} = \frac{3.00\times 10^8}{1.81\times 10^8} = 1.657

  2. Step 2

    λ=n⋅λ0=1.657⋅(6.328×10−7)=1.049×10−6 m\lambda = n\cdot \lambda_0 = 1.657\cdot (6.328\times 10^{-7}) = 1.049\times 10^{-6}\text{ m}

    Correct

    λ=λ0n=6.328×10−7 m1.657≈3.818×10−7 m\lambda = \frac{\lambda_0}{n} = \frac{6.328\times 10^{-7}\text{ m}}{1.657} \approx 3.818\times 10^{-7}\text{ m}

    Because light slows down while its frequency remains constant (v=fλv = f\lambda), the wavelength must decrease in an optically denser medium. Therefore, you must divide by the refractive index: λ=λ0n\lambda = \frac{\lambda_0}{n}.

  3. Step 3

    N=dλ=0.05431.049×10−6=5.18×104 cyclesN = \frac{d}{\lambda} = \frac{0.0543}{1.049\times 10^{-6}} = 5.18\times 10^4\text{ cycles}

    Correct

    N=dλ=0.0543 m3.818×10−7 m≈1.42×105 cyclesN = \frac{d}{\lambda} = \frac{0.0543\text{ m}}{3.818\times 10^{-7}\text{ m}} \approx 1.42\times 10^5\text{ cycles}

    Your formula for the number of cycles N=dλN = \frac{d}{\lambda} is correct, but the result is affected by the incorrect wavelength from Step 2.

  4. Step 4

    f=cλ0=3.00×1086.328×10−7=4.741×1014 Hz  ⟹  T=1f=2.11×10−15 sf = \frac{c}{\lambda_0} = \frac{3.00\times 10^8}{6.328\times 10^{-7}} = 4.741\times 10^{14}\text{ Hz} \implies T = \frac{1}{f} = 2.11\times 10^{-15}\text{ s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the refractive index of dense flint glass from the ratio of light speeds.

You recognized that wave frequency is invariant when light enters a new medium.

You used the correct relationship between distance and wavelength to find the cycle count.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse relation confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated wavelength as directly proportional to refractive index rather than inversely proportional, overlooking that a decrease in wave speed at fixed frequency forces the spatial wavelength to shorten.

REASONING PATH
Your ACEpath teacher’s suggested approach
Wavelength in a Medium
  • λ=vf=c/nf=λ0n\lambda = \frac{v}{f} = \frac{c/n}{f} = \frac{\lambda_0}{n}

  • Always check whether the medium is optically denser (n>1n > 1); if so, verify that your calculated wavelength is shorter than the vacuum wavelength.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide the vacuum wavelength by the refractive index: λ=λ0n=6.328×10−7 m1.657≈3.818×10−7 m\lambda = \frac{\lambda_0}{n} = \frac{6.328\times 10^{-7}\text{ m}}{1.657} \approx 3.818\times 10^{-7}\text{ m}.

  2. Divide the path length by the corrected wavelength: N=dλ=0.0543 m3.818×10−7 m≈1.42×105 cyclesN = \frac{d}{\lambda} = \frac{0.0543\text{ m}}{3.818\times 10^{-7}\text{ m}} \approx 1.42\times 10^5\text{ cycles}.

Final answer

N=1.42×105 cyclesN = 1.42\times 10^5\text{ cycles}, T=2.11×10−15 sT = 2.11\times 10^{-15}\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember the physical picture: when waves slow down upon entering a denser medium, wave crests bunch closer together, making λ<λ0\lambda < \lambda_0.

  • Perform a quick sanity check whenever using nn: since n>1n > 1, λn\lambda_n must always be smaller than λ0\lambda_0.

Lock it in

Similar question

01

A green laser has a vacuum wavelength of λ0=532 nm\lambda_0 = 532\text{ nm}. It enters water where its speed is v=2.25×108 m/sv = 2.25\times 10^8\text{ m/s}. Find the wavelength of the light in water and the number of wave cycles along a 4.50 cm4.50\text{ cm} path in water.

Answer

λ=3.99×10−7 m=399 nm\lambda = 3.99\times 10^{-7}\text{ m} = 399\text{ nm}, N=1.13×105 cyclesN = 1.13\times 10^5\text{ cycles}. Key steps: f=cλ0=3.00×1085.32×10−7≈5.64×1014 Hzf = \frac{c}{\lambda_0} = \frac{3.00\times 10^8}{5.32\times 10^{-7}} \approx 5.64\times 10^{14}\text{ Hz}; λ=vf=2.25×1085.64×1014≈3.99×10−7 m\lambda = \frac{v}{f} = \frac{2.25\times 10^8}{5.64\times 10^{14}} \approx 3.99\times 10^{-7}\text{ m}; N=dλ=0.0450 m3.99×10−7 m≈1.13×105 cyclesN = \frac{d}{\lambda} = \frac{0.0450\text{ m}}{3.99\times 10^{-7}\text{ m}} \approx 1.13\times 10^5\text{ cycles}.

02

Light travels through a plastic slab of thickness d=3.60 cmd = 3.60\text{ cm} containing exactly 9.00×1049.00\times 10^4 complete wave cycles. If the light source has a frequency of f=6.00×1014 Hzf = 6.00\times 10^{14}\text{ Hz}, determine the speed of light vv in this plastic.

Answer

v=2.40×108 m/sv = 2.40\times 10^8\text{ m/s}. Key steps: In-medium wavelength λ=dN=0.0360 m9.00×104=4.00×10−7 m\lambda = \frac{d}{N} = \frac{0.0360\text{ m}}{9.00\times 10^4} = 4.00\times 10^{-7}\text{ m}; wave speed v=fλ=(6.00×1014 s−1)(4.00×10−7 m)=2.40×108 m/sv = f\lambda = (6.00\times 10^{14}\text{ s}^{-1})(4.00\times 10^{-7}\text{ m}) = 2.40\times 10^8\text{ m/s}.

03

A pulse of yellow light (lambda0=589 nm\\lambda_0 = 589\text{ nm}) enters a diamond crystal (n=2.42n = 2.42). The pulse takes Δt=1.21×10−10 s\Delta t = 1.21\times 10^{-10}\text{ s} to cross the crystal. Determine the thickness dd of the diamond and the number of wave cycles NN along this distance.

Answer

d=1.50 cmd = 1.50\text{ cm}, N=6.16×104 cyclesN = 6.16\times 10^4\text{ cycles}. Key steps: Speed in diamond v=cn=3.00×1082.42≈1.24×108 m/sv = \frac{c}{n} = \frac{3.00\times 10^8}{2.42} \approx 1.24\times 10^8\text{ m/s}; distance d=vΔt=(1.24×108 m/s)(1.21×10−10 s)≈0.0150 m=1.50 cmd = v \Delta t = (1.24\times 10^8\text{ m/s})(1.21\times 10^{-10}\text{ s}) \approx 0.0150\text{ m} = 1.50\text{ cm}; in-medium wavelength λ=λ0n=589 nm2.42≈243.4 nm\lambda = \frac{\lambda_0}{n} = \frac{589\text{ nm}}{2.42} \approx 243.4\text{ nm}; N=dλ=0.0150 m2.434×10−7 m≈6.16×104 cyclesN = \frac{d}{\lambda} = \frac{0.0150\text{ m}}{2.434\times 10^{-7}\text{ m}} \approx 6.16\times 10^4\text{ cycles} (or alternatively N=fΔtN = f \Delta t).

Loading workspace…