Resources
A pair of ideal linear polarizers is arranged with their transmission axes completely crossed at an angle of , blocking all transmitted light. A third linear polarizer is inserted between them at an orientation angle measured relative to the transmission axis of the first polarizer (). (a) Find the angle that maximizes the transmitted intensity through the three-polarizer system. (b) If unpolarized light of intensity enters the first polarizer, calculate the maximum possible final intensity in .
Answer and steps
Final answer
(a) ; (b)
Steps
Part (a): Angle for Maximum Transmitted Intensity
- Transmission through the First Polarizer (): When initially unpolarized light of intensity passes through an ideal linear polarizer, the transmitted beam is linearly polarized along the polarizer's axis with an intensity reduced by half:
- Transmission through the Middle Polarizer (): The transmission axis of the second polarizer makes an angle with respect to the first. According to Malus's Law, the transmitted intensity is: The light emerging from is now linearly polarized along the axis of .
- Transmission through the Third Polarizer (): The third polarizer has its axis at relative to the first polarizer. Therefore, the angle between the transmission axes of and is: Applying Malus's Law again: Substituting the expression for :
- Maximizing Intensity using Double-Angle Identity: Using the trigonometric identity , we can rewrite as : For , the function reaches its absolute maximum of when:
Part (b): Maximum Transmitted Intensity
- Substitute Maximum Condition and Given Values: At , . The maximum final intensity is:
- Calculate the Final Intensity: Given :
Common Pitfall: Remember that light exiting is re-polarized along 's axis, not 's axis. The relevant angle for the third filter is the relative angle between and (), not the absolute angle of from the vertical.
Typical errors
01 The student forgets that unpolarized light passing through the first polarizer is halved, treating I₁ as equal to I₀.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
When completely unpolarized light passes through an ideal linear polarizer, its intensity is always halved because the average of over all random polarization angles is . You crossed out the division by and set .
- Step 4Correct
Your algebraic evaluation followed consistently from your assumed value of , but inherited the error from Step 3.
WHAT YOU DID WELL
Compliments from Your TeacherYou set up Malus's Law correctly for each consecutive polarizer boundary.
You used the double-angle identity skillfully to maximize the transmitted intensity.
You solved for the optimal middle polarizer angle accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou initially wrote , which was correct, but second-guessed yourself and crossed it out.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the transmission rule for unpolarized light entering a polarizer (, the one-half rule) with Malus's Law (), which applies only when the incident beam is already linearly polarized.
REASONING PATH
Your ACEpath teacher’s suggested approach- Incident Light State Check
If the incident light is unpolarized, , regardless of the polarizer's orientation.
Always verify whether the incoming beam is unpolarized or already polarized before writing down the intensity after the first filter.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that unpolarized light passing through the first polarizer obeys the one-half rule: .
Substitute and into your derived equation .
Calculate .
(a) ; (b)
02 The student applies Malus's law with linear cosine dependence instead of cosine squared, leading to an incorrect power of trigonometric functions.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Malus's law states that transmitted intensity varies with the square of the cosine of the angle between polarization directions (), because intensity is proportional to the square of the electric field amplitude. Using instead of misses the square on both intermediate stages.
- Step 2Correct
Because both and reach their maximum at on the interval , your optimization yielded the correct angle despite the missing exponent.
- Step 3
- Step 4Correct
Propagating your linear formula from Step 1 led to dividing by rather than , resulting in an intensity of instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the one-half rule for unpolarized light incident on the first polarizer.
You recognized that the third polarizer is oriented at relative to the second polarizer.
You successfully used the double-angle identity to maximize the transmission function and obtained the correct angle .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo; you consistently omitted the square exponent on the cosine function across both polarizers.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the transmission rule for the electric field amplitude () with the transmission rule for intensity (). Since optical detectors measure intensity, which is proportional to the time-averaged square of the electric field (), each polarizer reduces intensity by .
REASONING PATH
Your ACEpath teacher’s suggested approach- Amplitude vs. Intensity
, but .
Always verify whether you are tracking the electric field vector or light intensity before writing down the trigonometric factor.
- Compound Polarizer Factor
For two successive polarizers at relative angles and , .
Double-check that the overall scalar prefactor reflects squaring the identity: .
CORRECTED PATH
ACEpath Teacher's DemonstrationExpress the intensity after the second polarizer: .
Express the intensity after the third polarizer: .
Rewrite using the double-angle identity: .
Substitute and : .
(a) ; (b)
03 The student misidentifies the relative angle between the second and third polarizers as 90° + θ rather than 90° - θ, incorrectly writing the final intensity as dependent on cos²(90° + θ) without realizing the absolute geometric difference.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The middle polarizer is placed between the two crossed polarizers at an angle from the first (). Because the third polarizer is at relative to the first, the relative difference between the transmission axes of and is , not .
- Step 3Correct
Your maximization step is mathematically sound, and because , your expression coincidentally preserved the correct functional form.
- Step 4Correct
You correctly evaluated the initial reduction by half for unpolarized light and obtained the correct maximum transmitted intensity.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied Malus's Law to relate the intensities between successive polarizers.
You accurately accounted for the factor of when unpolarized light passes through the first polarizer.
You used the double-angle identity effectively to find the maximum condition.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou added the angles () instead of finding the positive difference between the transmission axes ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the absolute coordinate orientation with the relative difference between consecutive transmission axes. When polarizer lies intermediate to at and at , its angle relative to is the interior difference .
REASONING PATH
Your ACEpath teacher’s suggested approach- Successive Transmission Axes
In a sequence of linear polarizers, Malus's Law always depends on the acute relative angle between consecutive transmission axes.
Draw an axis diagram showing the orientation of each filter relative to a common reference line, then subtract consecutive angles.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the orientation of as and as relative to .
Find the relative angle between consecutive polarizers: .
Apply Malus's Law: .
Substitute : .
(a) ; (b)
Lock it in
What fraction of intensity passes through an ideal linear polarizer when the incident light is completely unpolarized?
Exactly (). The electric field vectors are randomly oriented in all transverse directions, and the average value of over all angles is .
Similar question
Unpolarized light with an intensity of passes through two linear polarizers whose transmission axes make an angle of with each other. What is the intensity of the light emerging from the second polarizer?
Answer
. After the first polarizer, . Applying Malus's Law across the second polarizer: .
A beam of unpolarized light with initial intensity passes through three successive polarizers. The second polarizer is rotated by relative to the first, and the third polarizer is rotated by another in the same direction relative to the second (making its axis relative to the first). Find the transmitted intensity .
Answer
. After polarizer 1: . After polarizer 2: . After polarizer 3: the relative angle is , so .
A system consists of four ideal polarizers in series. Unpolarized light of intensity enters the system. Polarizers 2, 3, and 4 are each rotated by an angle of relative to the preceding polarizer. Express the final transmitted intensity as a fraction of , and determine whether light is completely blocked if the fourth polarizer is at to the first.
Answer
; light is not blocked. After polarizer 1, . Each subsequent polarizer reduces intensity by a factor of . Thus, . Even though the first and fourth polarizers have crossed axes (), intermediate polarizers rotate the polarization plane at each step, allowing light through.