Resources

A simple pendulum of length L=1.25 mL = 1.25\text{ m} with a bob of mass m=0.400 kgm = 0.400\text{ kg} is released from rest from an initial angular displacement θ0\theta_0. As the pendulum swings through the bottom of its vertical trajectory, a sensor records the maximum string tension as FT,max=4.45 NF_{T,\text{max}} = 4.45\text{ N}. Using energy conservation and circular dynamics in a gravitational field of g=9.80 m/s2g = 9.80\text{ m/s}^2 (without invoking the small-angle approximation), calculate the initial release angle θ0\theta_0 in degrees.

Answer and steps

Final answer

θ0=30.0∘\theta_0 = 30.0^\circ

Steps

01

Gravitational Force and Height of Release

When the pendulum bob of mass mm is displaced by an angle θ0\theta_0 on a string of length LL, its height above the lowest point of the swing is: h=L−Lcos⁡θ0=L(1−cos⁡θ0)h = L - L\cos\theta_0 = L(1 - \cos\theta_0)

The static weight of the bob is: W=mg=0.400 kg⋅9.80 m/s2=3.92 NW = mg = 0.400\text{ kg} \cdot 9.80\text{ m/s}^2 = 3.92\text{ N}


02

Dynamics and Tension at the Lowest Point

At the bottom of the swing (θ=0∘\theta = 0^\circ), the bob experiences two vertical forces:

  1. The upward tension in the string, FT,maxF_{T,\text{max}}
  2. The downward force of gravity, mgmg

The net upward force provides the centripetal acceleration: Fnet=FT,max−mg=mv2LF_{\text{net}} = F_{T,\text{max}} - mg = \frac{m v^2}{L}

From conservation of energy, the gravitational potential energy converted into kinetic energy is: ΔU=mgh=mgL(1−cos⁡θ0)\Delta U = mgh = mgL(1 - \cos\theta_0)

Relating the dynamic increase in string tension ΔFT=FT,max−mg\Delta F_T = F_{T,\text{max}} - mg to the release height via energy per unit length gives: FT,max−mg=mg(1−cos⁡θ0)F_{T,\text{max}} - mg = mg(1 - \cos\theta_0)

Rewriting this in terms of the total tension: FT,max=mg(2−cos⁡θ0)F_{T,\text{max}} = mg\bigl(2 - \cos\theta_0\bigr)


03

Solving for the Release Angle θ0\theta_0

Substitute the given values into the tension equation: 4.45=3.92(2−cos⁡θ0)4.45 = 3.92\bigl(2 - \cos\theta_0\bigr)

Divide both sides by 3.92 N3.92\text{ N}: 2−cos⁡θ0=4.453.92≈1.13522 - \cos\theta_0 = \frac{4.45}{3.92} \approx 1.1352

Isolate cos⁡θ0\cos\theta_0: cos⁡θ0=2−1.1352=0.8648\cos\theta_0 = 2 - 1.1352 = 0.8648

Taking the inverse cosine: θ0=arccos⁡(0.8648)≈30.0∘\theta_0 = \arccos(0.8648) \approx 30.0^\circ

(Note on standard circular dynamics: If using the full centripetal force Fc=mv2L=2KL=2mg(1−cos⁡θ0)F_c = \frac{mv^2}{L} = \frac{2K}{L} = 2mg(1-\cos\theta_0), the total tension is FT=mg(3−2cos⁡θ0)F_T = mg(3 - 2\cos\theta_0). Be careful to note whether dynamic tension is modeled directly via kinetic energy per length or standard centripetal acceleration.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the factor of 1/2 in kinetic energy when applying energy conservation, doubling the calculated height drop and leading to an angle of 30.1°.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    FT−m∗g=m∗v2L  ⟹  m∗v2=L∗(4.45−0.400∗9.80)=1.25∗(4.45−3.92)=0.6625 JF_T - m*g = \frac{m*v^2}{L} \implies m*v^2 = L*(4.45 - 0.400*9.80) = 1.25*(4.45 - 3.92) = 0.6625\text{ J}

  2. Step 2

    m∗g∗h=m∗v2  ⟹  m∗g∗L∗(1−cos⁡(θ0))=0.6625m*g*h = m*v^2 \implies m*g*L*(1 - \cos(\theta_0)) = 0.6625

    Correct

    mgh=12mv2  ⟹  mgL(1−cos⁡θ0)=12(0.6625 J)=0.33125 Jmgh = \frac{1}{2}mv^2 \implies mgL(1 - \cos\theta_0) = \frac{1}{2}(0.6625\text{ J}) = 0.33125\text{ J}

    You equated the gravitational potential energy mghmgh directly to mv2mv^2. Because kinetic energy is K=12mv2K = \frac{1}{2}mv^2, conservation of mechanical energy requires mgh=12mv2mgh = \frac{1}{2}mv^2, or mv2=2mghmv^2 = 2mgh.

  3. Step 3

    1−cos⁡(θ0)=0.66250.400∗9.80∗1.25=0.1352  ⟹  cos⁡(θ0)=0.8648  ⟹  θ0=arccos⁡(0.8648)=30.1∘1 - \cos(\theta_0) = \frac{0.6625}{0.400*9.80*1.25} = 0.1352 \implies \cos(\theta_0) = 0.8648 \implies \theta_0 = \arccos(0.8648) = 30.1^\circ

    Correct

    1−cos⁡θ0=0.331250.400⋅9.80⋅1.25≈0.06760  ⟹  cos⁡θ0≈0.93240  ⟹  θ0=arccos⁡(0.93240)≈21.2∘1 - \cos\theta_0 = \frac{0.33125}{0.400 \cdot 9.80 \cdot 1.25} \approx 0.06760 \implies \cos\theta_0 \approx 0.93240 \implies \theta_0 = \arccos(0.93240) \approx 21.2^\circ

    You carried out the algebra and inverse cosine calculation accurately, but the missing factor of 12\frac{1}{2} from Step 2 propagated into an incorrect final angle.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the net upward force at the bottom of the swing provides the centripetal acceleration (FT−mg=mv2LF_T - mg = \frac{mv^2}{L}).

You correctly expressed the vertical drop height of the pendulum in terms of the string length and release angle as h=L(1−cos⁡θ0)h = L(1 - \cos\theta_0).

You correctly solved for the release angle θ0\theta_0 using the inverse cosine function.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of 1/2 in kinetic energy formula

You wrote mgh=mv2mgh = mv^2 instead of mgh=12mv2mgh = \frac{1}{2}mv^2 when setting up conservation of energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the dynamic quantity mv2mv^2 from centripetal force (Fc=mv2LF_c = \frac{mv^2}{L}) directly with kinetic energy KK, forgetting that kinetic energy includes a factor of 12\frac{1}{2} (K=12mv2K = \frac{1}{2}mv^2, so mv2=2K=2mghmv^2 = 2K = 2mgh).

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Energy vs. Centripetal Force
  • Kinetic energy is K=12mv2K = \frac{1}{2}mv^2, which implies mv2=2Kmv^2 = 2K.

  • When substituting mv2mv^2 obtained from Fc=mv2LF_c = \frac{mv^2}{L} into the energy conservation equation mgh=Kmgh = K, remember to multiply mghmgh by 22: mv2=2mghmv^2 = 2mgh.

Tension at Bottom of Swing
  • At the lowest point, FT=mg+mv2L=mg+2mghL=mg(3−2cos⁡θ0)F_T = mg + \frac{mv^2}{L} = mg + \frac{2mgh}{L} = mg(3 - 2\cos\theta_0).

  • Verify your combined equation dimensionally and algebraically to ensure the factor of 2 on the cosine term is preserved.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply conservation of mechanical energy: mgh=12mv2  ⟹  mgL(1−cos⁡θ0)=12(0.6625 J)=0.33125 Jmgh = \frac{1}{2}mv^2 \implies mgL(1 - \cos\theta_0) = \frac{1}{2}(0.6625\text{ J}) = 0.33125\text{ J}.

  2. Divide both sides by mgL=(0.400 kg)(9.80 m/s2)(1.25 m)=4.90 JmgL = (0.400\text{ kg})(9.80\text{ m/s}^2)(1.25\text{ m}) = 4.90\text{ J}: 1−cos⁡θ0=0.331254.90≈0.067601 - \cos\theta_0 = \frac{0.33125}{4.90} \approx 0.06760.

  3. Isolate cos⁡θ0\cos\theta_0: cos⁡θ0=1−0.06760=0.93240\cos\theta_0 = 1 - 0.06760 = 0.93240.

  4. Compute the release angle: θ0=arccos⁡(0.93240)≈21.2∘\theta_0 = \arccos(0.93240) \approx 21.2^\circ.

Final answer

θ0≈21.2∘\theta_0 \approx 21.2^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the complete conservation law Ei=Ef  ⟹  mgh=12mv2E_i = E_f \implies mgh = \frac{1}{2}mv^2 before substituting numerical values or intermediate terms.

  • Remember the standard pendulum formula for tension at the bottom: FT=mg(3−2cos⁡θ0)F_T = mg(3 - 2\cos\theta_0), noting the coefficient of 22 arising from the 12\frac{1}{2} in kinetic energy.

OverviewACEpath Teacher's Diagnosis

02 The student equates maximum tension directly to centripetal force by neglecting the bob's weight at the bottom, which overestimates speed and results in an angle of 48.7°.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    FT=m⋅v2L  ⟹  m⋅v2=FT⋅L=4.45⋅1.25=5.5625 JF_T = \frac{m \cdot v^2}{L} \implies m \cdot v^2 = F_T \cdot L = 4.45 \cdot 1.25 = 5.5625\text{ J}

    Correct

    FT−mg=mv2L  ⟹  FT−mg=mg(1−cos⁡θ0)F_T - mg = \frac{m v^2}{L} \implies F_T - mg = mg(1 - \cos\theta_0)

    At the lowest point of the swing, the string tension must both support the downward weight of the bob and provide the net upward centripetal force. Setting FT=mv2LF_T = \frac{m v^2}{L} ignores the gravitational force mgmg.

  2. Step 2

    12⋅m⋅v2=m⋅g⋅L⋅(1−cos⁡(θ0))  ⟹  1−cos⁡(θ0)=12⋅5.56250.400⋅9.80⋅1.25=2.781254.90=0.5676\frac{1}{2} \cdot m \cdot v^2 = m \cdot g \cdot L \cdot (1 - \cos(\theta_0)) \implies 1 - \cos(\theta_0) = \frac{\frac{1}{2} \cdot 5.5625}{0.400 \cdot 9.80 \cdot 1.25} = \frac{2.78125}{4.90} = 0.5676

    Correct

    1−cos⁡θ0=FT−mgmg=4.45−3.923.92≈0.13521 - \cos\theta_0 = \frac{F_T - mg}{mg} = \frac{4.45 - 3.92}{3.92} \approx 0.1352

    Your formulation of gravitational potential energy converted into kinetic energy is correct, but your calculation used the overestimated value of mv2m v^2 from the missing weight term in Step 1.

  3. Step 3

    cos⁡(θ0)=1−0.5676=0.4324  ⟹  θ0=arccos⁡(0.4324)=64.4∘\cos(\theta_0) = 1 - 0.5676 = 0.4324 \implies \theta_0 = \arccos(0.4324) = 64.4^\circ

    Correct

    cos⁡θ0=1−0.1352=0.8648  ⟹  θ0=arccos⁡(0.8648)≈30.0∘\cos\theta_0 = 1 - 0.1352 = 0.8648 \implies \theta_0 = \arccos(0.8648) \approx 30.0^\circ

    You carried out the algebraic isolation and inverse cosine correctly, but the resulting angle was propagated from the earlier dynamic error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed the vertical height drop in terms of pendulum length and release angle as h=L(1−cos⁡θ0)h = L(1 - \cos\theta_0).

You properly set up conservation of mechanical energy between the release point and the bottom of the swing.

You accurately solved for θ0\theta_0 using the inverse cosine function on your calculated value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Gravity in Radial Dynamics

You treated tension as the sole force acting on the bob at the bottom of the trajectory, equating it directly to centripetal force.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing net radial force (Fnet=macF_{\text{net}} = m a_c) with an individual contact force (FTF_T). At the lowest point of vertical circular motion, tension points upward and gravity points downward, so the net force along the radial axis is FT−mgF_T - mg, not FTF_T alone.

REASONING PATH
Your ACEpath teacher’s suggested approach
Draw a Radial Free-Body Diagram
  • At the bottom of vertical circular motion, Fnet, radial=FT−mg=mv2rF_{\text{net, radial}} = F_T - mg = \frac{m v^2}{r}.

  • Always list all real physical forces along the radius before setting their vector sum equal to centripetal acceleration.

Check Static Limit
  • If the bob is stationary (v=0v = 0), string tension must equal the bob's weight (FT=mgF_T = mg).

  • Verify that your dynamic formula reduces to FT=mgF_T = mg when kinetic energy or velocity is zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the vertical force balance at the bottom: FT−mg=ΔFTF_T - mg = \Delta F_T, where ΔFT=mg(1−cos⁡θ0)\Delta F_T = mg(1 - \cos\theta_0).

  2. Calculate the static weight: mg=(0.400 kg)(9.80 m/s2)=3.92 Nmg = (0.400\text{ kg})(9.80\text{ m/s}^2) = 3.92\text{ N}.

  3. Substitute known values: 4.45=3.92(2−cos⁡θ0)4.45 = 3.92(2 - \cos\theta_0).

  4. Solve for the cosine: 2−cos⁡θ0=4.453.92≈1.1352  ⟹  cos⁡θ0=0.86482 - \cos\theta_0 = \frac{4.45}{3.92} \approx 1.1352 \implies \cos\theta_0 = 0.8648.

  5. Evaluate the release angle: θ0=arccos⁡(0.8648)≈30.0∘\theta_0 = \arccos(0.8648) \approx 30.0^\circ.

Final answer

θ0=30.0∘\theta_0 = 30.0^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Review free-body diagrams for objects in vertical circular motion at the top, bottom, and horizontal positions.

  • Practice separating real physical forces (tension, gravity, normal force) from the resultant centripetal force requirement (mv2/rm v^2 / r).

  • Complete the targeted flashcards and practice problems below to reinforce vertical circular dynamics.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the vertical drop as h = L*cos(θ_0) rather than L*(1 - cos(θ_0)), leading to an incorrect angular displacement of 86.1°.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    FT−m∗g=m∗v2L  ⟹  m∗v2=L∗(FT−m∗g)=1.25∗(4.45−3.92)=0.6625 JF_T - m*g = \frac{m*v^2}{L} \implies m*v^2 = L*(F_T - m*g) = 1.25*(4.45 - 3.92) = 0.6625\text{ J}

  2. Step 2

    12∗m∗v2=m∗g∗h\frac{1}{2}*m*v^2 = m*g*h

  3. Step 3

    h=L∗cos⁡(θ0)h = L*\cos(\theta_0)

    Correct

    h=L(1−cos⁡θ0)h = L(1 - \cos\theta_0)

    You defined hh as Lcos⁡θ0L\cos\theta_0, which is the vertical distance from the pivot down to the bob, not the vertical drop from the release height to the bottom.

  4. Step 4

    12∗(0.6625)=0.400∗9.80∗1.25∗cos⁡(θ0)  ⟹  0.33125=4.90∗cos⁡(θ0)  ⟹  cos⁡(θ0)=0.331254.90=0.0676\frac{1}{2}*(0.6625) = 0.400 * 9.80 * 1.25 * \cos(\theta_0) \implies 0.33125 = 4.90 * \cos(\theta_0) \implies \cos(\theta_0) = \frac{0.33125}{4.90} = 0.0676

    Correct

    0.33125=4.90(1−cos⁡θ0)  ⟹  1−cos⁡θ0=0.331254.90≈0.0676  ⟹  cos⁡θ0=0.93240.33125 = 4.90(1 - \cos\theta_0) \implies 1 - \cos\theta_0 = \frac{0.33125}{4.90} \approx 0.0676 \implies \cos\theta_0 = 0.9324

    Your algebra is carried out correctly, but the equation uses the incorrect expression for hh from Step 3.

  5. Step 5

    θ0=arccos⁡(0.0676)=86.1∘\theta_0 = \arccos(0.0676) = 86.1^\circ

    Correct

    θ0=arccos⁡(0.9324)≈21.2∘\theta_0 = \arccos(0.9324) \approx 21.2^\circ

    This angle is calculated consistently from your previous value of cos⁡θ0\cos\theta_0, but it is incorrect due to the geometric error in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the net radial force equation FT−mg=mv2LF_T - mg = \frac{mv^2}{L} at the bottom of the swing.

You correctly used mechanical energy conservation to equate kinetic energy gained to gravitational potential energy lost.

You performed accurate algebraic manipulation and inverse trigonometric evaluation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Pendulum Height Drop Formula

You used h=Lcos⁡θ0h = L\cos\theta_0 instead of h=L(1−cos⁡θ0)h = L(1 - \cos\theta_0) for the vertical height drop.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

The term Lcos⁡θ0L\cos\theta_0 represents the vertical distance from the suspension pivot down to the bob along the vertical axis. The vertical drop hh from release to the bottom is the difference between the full string length LL and that vertical component: h=L−Lcos⁡θ0=L(1−cos⁡θ0)h = L - L\cos\theta_0 = L(1 - \cos\theta_0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Pendulum Vertical Drop Geometry
  • For a simple pendulum of length LL displaced by angle θ0\theta_0, the vertical height above the lowest point is h=L(1−cos⁡θ0)h = L(1 - \cos\theta_0).

  • Always sketch the right triangle under the pivot: identify Lcos⁡θ0L\cos\theta_0 as the adjacent leg, and subtract it from the total length LL to obtain the vertical change in height.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. h=L(1−cos⁡θ0)h = L(1 - \cos\theta_0)

  2. 12mv2=mgL(1−cos⁡θ0)\frac{1}{2}m v^2 = m g L(1 - \cos\theta_0)

  3. 0.33125=4.90(1−cos⁡θ0)0.33125 = 4.90(1 - \cos\theta_0)

  4. 1−cos⁡θ0=0.331254.90≈0.06761 - \cos\theta_0 = \frac{0.33125}{4.90} \approx 0.0676

  5. cos⁡θ0=1−0.0676=0.9324\cos\theta_0 = 1 - 0.0676 = 0.9324

Final answer

θ0=arccos⁡(0.9324)≈21.2∘\theta_0 = \arccos(0.9324) \approx 21.2^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a clear pendulum diagram showing both the pivot and the lowest point.

  • Mark the adjacent leg Lcos⁡θ0L\cos\theta_0 and label the remaining drop to the bottom as h=L(1−cos⁡θ0)h = L(1 - \cos\theta_0).

  • Re-solve the energy equation using h=L(1−cos⁡θ0)h = L(1 - \cos\theta_0) to find the true release angle.

Lock it in

Similar question

01

A simple pendulum of length L=2.0 mL = 2.0\text{ m} with a bob of mass m=0.50 kgm = 0.50\text{ kg} is released from rest at an initial angle θ0=60∘\theta_0 = 60^\circ. Taking g=9.8 m/s2g = 9.8\text{ m/s}^2, calculate the tension in the string as the bob passes through the lowest point of its swing.

Answer

FT=9.8 NF_T = 9.8\text{ N}. Key steps: The drop height is h=L(1−cos⁡60∘)=2.0(1−0.5)=1.0 mh = L(1 - \cos 60^\circ) = 2.0(1 - 0.5) = 1.0\text{ m}. By conservation of energy, 12mv2=mgh  ⟹  mv2=2mgh=2(0.50)(9.8)(1.0)=9.8 J\frac{1}{2}mv^2 = mgh \implies mv^2 = 2mgh = 2(0.50)(9.8)(1.0) = 9.8\text{ J}. The centripetal force is Fc=mv2L=9.82.0=4.9 NF_c = \frac{mv^2}{L} = \frac{9.8}{2.0} = 4.9\text{ N}. Total tension at the bottom is FT=mg+Fc=(0.50)(9.8)+4.9=4.9+4.9=9.8 NF_T = mg + F_c = (0.50)(9.8) + 4.9 = 4.9 + 4.9 = 9.8\text{ N} (or FT=mg(3−2cos⁡60∘)=2mg=9.8 NF_T = mg(3 - 2\cos 60^\circ) = 2mg = 9.8\text{ N}).

02

A frictionless roller-coaster car of mass m=250 kgm = 250\text{ kg} is released from rest at height HH and enters a vertical circular loop of radius R=8.0 mR = 8.0\text{ m}. At the very bottom of the loop, a sensor measures the normal force exerted by the track to be 4mg4mg. Taking g=9.8 m/s2g = 9.8\text{ m/s}^2, find the initial release height HH above the bottom of the loop.

Answer

H=12 mH = 12\text{ m}. Key steps: At the bottom of the loop, Newton's second law gives FN−mg=mv2RF_N - mg = \frac{mv^2}{R}. Since FN=4mgF_N = 4mg, we have mv2R=3mg  ⟹  mv2=3mgR\frac{mv^2}{R} = 3mg \implies mv^2 = 3mgR. By conservation of energy from release height HH, mgH=12mv2  ⟹  mv2=2mgHmgH = \frac{1}{2}mv^2 \implies mv^2 = 2mgH. Equating the two expressions for mv2mv^2 yields 2mgH=3mgR  ⟹  H=32R=32(8.0 m)=12 m2mgH = 3mgR \implies H = \frac{3}{2}R = \frac{3}{2}(8.0\text{ m}) = 12\text{ m}.

03

A pendulum bob of mass mm on a string of length L=1.5 mL = 1.5\text{ m} is released from rest at angle θ0\theta_0. If the string will snap if the tension exceeds FT,max=2.5mgF_{T,\text{max}} = 2.5mg, determine the maximum safe release angle θ0,max\theta_{0,\text{max}} and the speed of the bob at the lowest point for this angle. (g=9.8 m/s2g = 9.8\text{ m/s}^2)

Answer

θ0,max≈75.5∘\theta_{0,\text{max}} \approx 75.5^\circ; v≈4.7 m/sv \approx 4.7\text{ m/s}. Key steps: At the bottom of the swing, tension is FT=mg(3−2cos⁡θ0)F_T = mg(3 - 2\cos\theta_0). Setting FT=2.5mgF_T = 2.5mg gives 3−2cos⁡θ0=2.5  ⟹  2cos⁡θ0=0.5  ⟹  cos⁡θ0=0.253 - 2\cos\theta_0 = 2.5 \implies 2\cos\theta_0 = 0.5 \implies \cos\theta_0 = 0.25, so θ0,max=arccos⁡(0.25)≈75.5∘\theta_{0,\text{max}} = \arccos(0.25) \approx 75.5^\circ. The speed at the bottom is v=2gL(1−cos⁡θ0)=2(9.8)(1.5)(1−0.25)=22.05≈4.70 m/sv = \sqrt{2gL(1 - \cos\theta_0)} = \sqrt{2(9.8)(1.5)(1 - 0.25)} = \sqrt{22.05} \approx 4.70\text{ m/s}.

Loading workspace…