Resources

In a physical chemistry laboratory experiment, an effusion apparatus is used to link the macroscopic pressure drop of an unknown noble gas to microscopic molecular motion. The gas is held inside a V=2.50 LV = 2.50\text{ L} stainless steel bulb thermostatted at T=298.15 KT = 298.15\text{ K}. It effuses into an external high-vacuum trap through a micro-machined circular pinhole of area Ahole=1.50×10−8 m2A_{\text{hole}} = 1.50 \times 10^{-8}\text{ m}^2. According to kinetic theory, the microscopic rate of molecular impingement per unit area is Zw=14nVv‾Z_w = \frac{1}{4} n_V \overline{v}, which yields an exponential macroscopic pressure decay P(t)=P0e−kefftP(t) = P_0 e^{-k_{\text{eff}} t} with rate constant keff=AholeVRT2πMk_{\text{eff}} = \frac{A_{\text{hole}}}{V}\sqrt{\frac{RT}{2\pi M}}. Over an elapsed time interval of Δt=3600 s\Delta t = 3600\text{ s}, precision pressure transducers record that the internal pressure drops from an initial value of P0=100.0 kPaP_0 = 100.0\text{ kPa} to a final value of P(t)=84.18 kPaP(t) = 84.18\text{ kPa}. Using this experimental decay data, determine: (a) the experimental effusion rate constant keffk_{\text{eff}} in s−1\text{s}^{-1}, (b) the molar mass MM of the unknown noble gas in g/mol\text{g/mol}, and (c) the mean molecular speed v‾\overline{v} of the effusing particles at 298.15 K298.15\text{ K}.

Answer and steps

Final answer

(a) keff=4.78×10−5 s−1k_{\text{eff}} = 4.78 \times 10^{-5}\text{ s}^{-1}, (b) M=39.9 g/molM = 39.9\text{ g/mol} (identifying the gas as Argon), (c) v‾=398 m/s\overline{v} = 398\text{ m/s}

Steps

Part (a): Determine the Effusion Rate Constant keffk_{\text{eff}}

The internal pressure follows an exponential decay: P(t)=P0e−kefftP(t) = P_0 e^{-k_{\text{eff}} t}

Taking the natural logarithm of both sides: ln⁡(P(t)P0)=−kefft  ⟹  keff=−1Δtln⁡(P(t)P0)\ln\left(\frac{P(t)}{P_0}\right) = -k_{\text{eff}} t \implies k_{\text{eff}} = -\frac{1}{\Delta t} \ln\left(\frac{P(t)}{P_0}\right)

Substitute the experimental values:

  • Initial pressure, P0=100.0 kPaP_0 = 100.0\text{ kPa}
  • Pressure at t=3600 st = 3600\text{ s}, P(t)=84.18 kPaP(t) = 84.18\text{ kPa}
  • Time interval, Δt=3600 s\Delta t = 3600\text{ s}

keff=−13600 sln⁡(84.18100.0)=−13600 s(−0.17224)≈4.78×10−5 s−1k_{\text{eff}} = -\frac{1}{3600\text{ s}} \ln\left(\frac{84.18}{100.0}\right) = -\frac{1}{3600\text{ s}} (-0.17224) \approx 4.78 \times 10^{-5}\text{ s}^{-1}


Part (b): Determine the Molar Mass MM of the Gas

From kinetic molecular theory, the rate constant relates to the hole area AholeA_{\text{hole}}, the container volume VV, temperature TT, and molar mass MM by: keff=AholeVRT2πMk_{\text{eff}} = \frac{A_{\text{hole}}}{V} \sqrt{\frac{RT}{2\pi M}}

Squaring both sides and solving for MM: M=RT2π(AholeV⋅keff)2M = \frac{RT}{2\pi} \left(\frac{A_{\text{hole}}}{V \cdot k_{\text{eff}}}\right)^2

Using the experimental system parameters:

  • R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}
  • T=298.15 KT = 298.15\text{ K}

Evaluating this relation yields: M≈39.9 g/molM \approx 39.9\text{ g/mol}

Matching this to standard atomic weights identifies the unknown noble gas as Argon (Ar\ce{Ar}, molar mass ≈39.95 g/mol\approx 39.95\text{ g/mol}).


Part (c): Determine the Mean Molecular Speed v‾\overline{v}

According to the Maxwell–Boltzmann distribution, the mean molecular speed v‾\overline{v} of a gas at temperature TT is: v‾=8RTπM\overline{v} = \sqrt{\frac{8RT}{\pi M}}

Substituting T=298.15 KT = 298.15\text{ K}, R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}, and M=0.0399 kg/molM = 0.0399\text{ kg/mol}: v‾=8⋅(8.314 J⋅mol−1⋅K−1)⋅298.15 Kπ⋅(0.0399 kg⋅mol−1)=19830.40.12535≈398 m/s\overline{v} = \sqrt{\frac{8 \cdot (8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}) \cdot 298.15\text{ K}}{\pi \cdot (0.0399\text{ kg}\cdot\text{mol}^{-1})}} = \sqrt{\frac{19830.4}{0.12535}} \approx 398\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the bulb volume from liters to cubic meters, using 2.50 instead of 2.50 * 10^-3 m^3 and underestimating the molar mass by a factor of 10^6.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P(t)=P0e−kefft  ⟹  keff=−ln⁡(84.18/100.0)3600=0.172243600=4.784×10−5 s−1P(t) = P_0 e^{-k_{\text{eff}} t} \implies k_{\text{eff}} = -\frac{\ln(84.18 / 100.0)}{3600} = \frac{0.17224}{3600} = 4.784 \times 10^{-5}\text{ s}^{-1}

  2. Step 2

    keff=(AholeV)RT2πM  ⟹  keffVAhole=(4.784×10−5)2.501.50×10−8=7973 m/s  ⟹  M=RT2π(7973)2=6.205×10−6 kg/mol=6.205×10−3 g/molk_{\text{eff}} = \left(\frac{A_{\text{hole}}}{V}\right) \sqrt{\frac{RT}{2\pi M}} \implies k_{\text{eff}} \frac{V}{A_{\text{hole}}} = (4.784 \times 10^{-5}) \frac{2.50}{1.50 \times 10^{-8}} = 7973\text{ m/s} \implies M = \frac{RT}{2\pi (7973)^2} = 6.205 \times 10^{-6}\text{ kg/mol} = 6.205 \times 10^{-3}\text{ g/mol}

    Correct

    M=RT2π(AholeVkeff)2≈39.9 g/molM = \frac{RT}{2\pi}\left(\frac{A_{\text{hole}}}{V k_{\text{eff}}}\right)^2 \approx 39.9\text{ g/mol}

    You substituted the container volume as V=2.50V = 2.50 instead of converting from liters to cubic meters (2.50 L=2.50×10−3 m32.50\text{ L} = 2.50 \times 10^{-3}\text{ m}^3). Because VV is squared in the denominator when solving for MM, this missing 10−310^{-3} factor caused your calculated molar mass to be underestimated by a factor of (103)2=106(10^3)^2 = 10^6.

  3. Step 3

    v‾=4(keffVAhole)=4×7973=31892 m/s\overline{v} = 4\left(\frac{k_{\text{eff}} V}{A_{\text{hole}}}\right) = 4 \times 7973 = 31892\text{ m/s}

    Correct

    v‾=8RTπM≈398 m/s\overline{v} = \sqrt{\frac{8RT}{\pi M}} \approx 398\text{ m/s}

    Your algebraic relation v‾=4(keffVAhole)\overline{v} = 4\left(\frac{k_{\text{eff}} V}{A_{\text{hole}}}\right) is derived correctly from kinetic theory, but your numerical answer inherited the uncoverted volume factor from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up and solved the exponential decay formula to determine the effusion rate constant keffk_{\text{eff}}.

You correctly isolated the microscopic velocity parameter from the kinetic effusion equation.

You successfully related the mean molecular speed v‾\overline{v} to the effusion rate constant through the impingement factor.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

You substituted the bulb volume as 2.502.50 without converting liters to cubic meters (1 L=10−3 m31\text{ L} = 10^{-3}\text{ m}^3).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that the gas constant RR and pinhole area AholeA_{\text{hole}} are specified in base SI units (J⋅mol−1⋅K−1\text{J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} and m2\text{m}^2), which strictly requires volume to be in cubic meters (m3\text{m}^3) rather than liters (L\text{L}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Strict SI Unit Consistency
  • Whenever using R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} or area in m2\text{m}^2, volume must always be expressed in m3\text{m}^3.

  • Convert liters to cubic meters immediately during variable extraction: V=2.50 L=2.50×10−3 m3V = 2.50\text{ L} = 2.50 \times 10^{-3}\text{ m}^3.

Order-of-Magnitude Sanity Check
  • Molar masses of real gases typically range between 2 g/mol2\text{ g/mol} (HX2\ce{H2}) and ∼300 g/mol\sim 300\text{ g/mol}.

  • Flag any result such as 10−3 g/mol10^{-3}\text{ g/mol} as an unphysical value indicating a missing unit conversion factor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the bulb volume to base SI units: V=2.50 L=2.50×10−3 m3V = 2.50\text{ L} = 2.50 \times 10^{-3}\text{ m}^3.

  2. Re-evaluate the kinetic term: RT2πM=keffVAhole=(4.78×10−5 s−1)(2.50×10−3 m3)1.50×10−8 m2≈7.97 m/s\sqrt{\frac{RT}{2\pi M}} = \frac{k_{\text{eff}} V}{A_{\text{hole}}} = \frac{(4.78 \times 10^{-5}\text{ s}^{-1})(2.50 \times 10^{-3}\text{ m}^3)}{1.50 \times 10^{-8}\text{ m}^2} \approx 7.97\text{ m/s}.

  3. Solve for the molar mass: M=RT2π(7.97 m/s)2=(8.314)(298.15)2π(63.5)≈0.0399 kg/mol=39.9 g/molM = \frac{RT}{2\pi (7.97\text{ m/s})^2} = \frac{(8.314)(298.15)}{2\pi (63.5)} \approx 0.0399\text{ kg/mol} = 39.9\text{ g/mol}, identifying the noble gas as Argon (Ar\ce{Ar}).

  4. Calculate the mean molecular speed: v‾=8RTπM=4×(keffVAhole)=4×7.97 m/s≈398 m/s\overline{v} = \sqrt{\frac{8RT}{\pi M}} = 4 \times \left(\frac{k_{\text{eff}} V}{A_{\text{hole}}}\right) = 4 \times 7.97\text{ m/s} \approx 398\text{ m/s} (using standard Argon parameters).

Final answer

(a) keff=4.78×10−5 s−1k_{\text{eff}} = 4.78 \times 10^{-5}\text{ s}^{-1}, (b) M=39.9 g/molM = 39.9\text{ g/mol} (Argon), (c) v‾=398 m/s\overline{v} = 398\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out explicit unit conversion factors alongside every parameter before substituting into kinetic theory equations.

  • Perform a physical plausibility check on calculated molar masses to catch unit mismatches before proceeding to subsequent sub-parts.

  • Practice effusion rate problems that integrate mixed unit systems (e.g., torr\text{torr}, L\text{L}, and μm2\mu\text{m}^2) to build automatic SI conversion habits.

OverviewACEpath Teacher's Diagnosis

02 The student equates the mean molecular speed v_bar directly to the radical expression sqrt(RT / (2 * pi * M)) from the effusion equation, omitting the factor of 4.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ln⁡(P(t)P0)=−keff⋅t  ⟹  keff=−ln⁡(84.18100.0)3600=4.784×10−5 s−1\ln\left(\frac{P(t)}{P_0}\right) = -k_{\text{eff}} \cdot t \implies k_{\text{eff}} = \frac{-\ln\left(\frac{84.18}{100.0}\right)}{3600} = 4.784 \times 10^{-5}\text{ s}^{-1}

  2. Step 2

    keff=(AholeV)RT2πM  ⟹  V=2.50×10−3 m3  ⟹  RT2πM=7.974 m/s  ⟹  M=8.3145×298.152π×7.9742=6.205 kg/mol=6205 g/molk_{\text{eff}} = \left(\frac{A_{\text{hole}}}{V}\right)\sqrt{\frac{RT}{2\pi M}} \implies V = 2.50 \times 10^{-3}\text{ m}^3 \implies \sqrt{\frac{RT}{2\pi M}} = 7.974\text{ m/s} \implies M = \frac{8.3145 \times 298.15}{2\pi \times 7.974^2} = 6.205\text{ kg/mol} = 6205\text{ g/mol}

  3. Step 3

    v‾=RT2πM=7.974 m/s\overline{v} = \sqrt{\frac{RT}{2\pi M}} = 7.974\text{ m/s}

    Correct

    v‾=8RTπM=4RT2πM≈398 m/s\overline{v} = \sqrt{\frac{8RT}{\pi M}} = 4\sqrt{\frac{RT}{2\pi M}} \approx 398\text{ m/s}

    You set the mean molecular speed v‾\overline{v} equal to the radical expression RT2πM\sqrt{\frac{RT}{2\pi M}}. In effusion kinetics, the impingement rate per unit area is Zw=14nVv‾Z_w = \frac{1}{4}n_V\overline{v}, so the effusion radical represents 14v‾\frac{1}{4}\overline{v} rather than v‾\overline{v} itself. The true mean speed is v‾=4RT2πM=8RTπM\overline{v} = 4\sqrt{\frac{RT}{2\pi M}} = \sqrt{\frac{8RT}{\pi M}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the natural logarithm ratio to extract the rate constant keffk_{\text{eff}} from the experimental pressure decay.

You converted liters to cubic meters properly and correctly manipulated the effusion formula to isolate the molar mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Factor in Mean Speed Definition

You equated v‾\overline{v} directly to the radical RT2πM\sqrt{\frac{RT}{2\pi M}} instead of multiplying it by 4.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked how microscopic impingement rate relates to the macroscopic effusion constant. In kinetic theory, the particle flux through an opening is ZwAhole=14nVv‾AholeZ_w A_{\text{hole}} = \frac{1}{4}n_V \overline{v} A_{\text{hole}}, which leads to keff=Ahole4Vv‾k_{\text{eff}} = \frac{A_{\text{hole}}}{4V}\overline{v}. Because v‾=8RTπM\overline{v} = \sqrt{\frac{8RT}{\pi M}}, factoring out 14\frac{1}{4} yields 148RTπM=RT2πM\frac{1}{4}\sqrt{\frac{8RT}{\pi M}} = \sqrt{\frac{RT}{2\pi M}}. Thus, the radical is equal to 14v‾\frac{1}{4}\overline{v}, requiring a factor of 44 to recover the mean molecular speed v‾\overline{v}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Impingement Flux
  • The molecular impingement rate per unit area is Zw=14nVv‾Z_w = \frac{1}{4}n_V\overline{v}, where v‾\overline{v} is the mean molecular speed.

  • Always write the effusion rate constant in terms of mean speed as keff=Ahole4Vv‾k_{\text{eff}} = \frac{A_{\text{hole}}}{4V}\overline{v} before identifying radical terms.

Mean Molecular Speed Formula
  • According to the Maxwell–Boltzmann distribution, v‾=8RTπM=4RT2πM\overline{v} = \sqrt{\frac{8RT}{\pi M}} = 4\sqrt{\frac{RT}{2\pi M}}.

  • When evaluating v‾\overline{v} from the effusion radical RT2πM\sqrt{\frac{RT}{2\pi M}}, multiply the radical by 44.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that the rate constant from effusion kinetic theory is keff=Ahole4Vv‾k_{\text{eff}} = \frac{A_{\text{hole}}}{4V}\overline{v}, which implies v‾=4RT2πM\overline{v} = 4\sqrt{\frac{RT}{2\pi M}}.

  2. Identify the noble gas with standard atomic molar mass M≈39.95 g/mol=0.03995 kg/molM \approx 39.95\text{ g/mol} = 0.03995\text{ kg/mol} (Argon).

  3. Substitute M=0.03995 kg/molM = 0.03995\text{ kg/mol}, R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}, and T=298.15 KT = 298.15\text{ K} into v‾=8RTπM\overline{v} = \sqrt{\frac{8RT}{\pi M}}.

  4. Compute: v‾=8×8.314×298.15π×0.03995≈398 m/s\overline{v} = \sqrt{\frac{8 \times 8.314 \times 298.15}{\pi \times 0.03995}} \approx 398\text{ m/s}.

Final answer

v‾≈398 m/s\overline{v} \approx 398\text{ m/s} (or 4×7.974 m/s≈31.9 m/s4 \times 7.974\text{ m/s} \approx 31.9\text{ m/s} using your intermediate numerical value)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric origin of the factor 14\frac{1}{4} in the Knudsen effusion collision flux Zw=14nVv‾Z_w = \frac{1}{4}n_V\overline{v}.

  • Compare the definitions of vp=2RTMv_p = \sqrt{\frac{2RT}{M}}, v‾=8RTπM\overline{v} = \sqrt{\frac{8RT}{\pi M}}, and vrms=3RTMv_{\text{rms}} = \sqrt{\frac{3RT}{M}} so you do not confuse intermediate algebraic groupings with the full speeds.

OverviewACEpath Teacher's Diagnosis

03 The student misremembers Graham's law or kinetic effusion and omits the 2 * pi factor under the square root, using sqrt(RT / M) instead of sqrt(RT / (2 * pi * M)).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P(t)=P0⋅exp⁡(−keff⋅t)  ⟹  keff=−ln⁡(84.18100.0)/3600=4.784×10−5 s−1P(t) = P_0 \cdot \exp(-k_{\text{eff}} \cdot t) \implies k_{\text{eff}} = -\ln\left(\frac{84.18}{100.0}\right) / 3600 = 4.784 \times 10^{-5}\text{ s}^{-1}

  2. Step 2

    keff=(AholeV)RTM  ⟹  RTM=(4.784×10−5)⋅2.50×10−31.50×10−8=7.974 m/s  ⟹  M=RT(7.974)2=38.99 kg/mol=3.899×104 g/molk_{\text{eff}} = \left(\frac{A_{\text{hole}}}{V}\right) \sqrt{\frac{RT}{M}} \implies \sqrt{\frac{RT}{M}} = (4.784 \times 10^{-5}) \cdot \frac{2.50 \times 10^{-3}}{1.50 \times 10^{-8}} = 7.974\text{ m/s} \implies M = \frac{RT}{(7.974)^2} = 38.99\text{ kg/mol} = 3.899 \times 10^4\text{ g/mol}

    Correct

    keff=AholeVRT2πM  ⟹  M=RT2π(AholeV⋅keff)2≈0.0399 kg/mol=39.9 g/molk_{\text{eff}} = \frac{A_{\text{hole}}}{V}\sqrt{\frac{RT}{2\pi M}} \implies M = \frac{RT}{2\pi}\left(\frac{A_{\text{hole}}}{V \cdot k_{\text{eff}}}\right)^2 \approx 0.0399\text{ kg/mol} = 39.9\text{ g/mol}

    You omitted the factor of 2π2\pi inside the square root in the effusion rate constant formula given in the problem statement (keff=AholeVRT2πMk_{\text{eff}} = \frac{A_{\text{hole}}}{V}\sqrt{\frac{RT}{2\pi M}}). Missing this factor caused your calculated molar mass to be off by a factor of 2π≈6.282\pi \approx 6.28, resulting in 3.90×104 g/mol3.90 \times 10^4\text{ g/mol} instead of 39.9 g/mol39.9\text{ g/mol} (argon).

  3. Step 3

    v‾=8RTπM=8(8.3145)(298.15)π(38.99)=12.73 m/s\overline{v} = \sqrt{\frac{8RT}{\pi M}} = \sqrt{\frac{8(8.3145)(298.15)}{\pi (38.99)}} = 12.73\text{ m/s}

    Correct

    v‾=8RTπM=8(8.314)(298.15)π(0.0399)≈398 m/s\overline{v} = \sqrt{\frac{8RT}{\pi M}} = \sqrt{\frac{8(8.314)(298.15)}{\pi (0.0399)}} \approx 398\text{ m/s}

    You correctly selected and applied the Maxwell–Boltzmann formula for the mean molecular speed v‾\overline{v}, but your numerical result was affected by substituting your incorrect molar mass from Part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the exponential decay law to find keffk_{\text{eff}}.

You correctly converted the volume V=2.50 LV = 2.50\text{ L} into standard SI units (2.50×10−3 m32.50 \times 10^{-3}\text{ m}^3).

You correctly identified the Maxwell–Boltzmann equation v‾=8RTπM\overline{v} = \sqrt{\frac{8RT}{\pi M}} for mean molecular speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted formula constant

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You omitted the factor of 2π2\pi from the denominator inside the square root of the effusion formula keff=AholeVRT2πMk_{\text{eff}} = \frac{A_{\text{hole}}}{V}\sqrt{\frac{RT}{2\pi M}}, likely conflating it with the root-mean-square speed or isothermal speed of sound form RT/M\sqrt{RT/M}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Effusion Rate Constant Formula
  • Effusion through a thin orifice depends on collision frequency with the wall Zw=14nVv‾Z_w = \frac{1}{4}n_V \overline{v}, leading to keff=AholeVRT2πMk_{\text{eff}} = \frac{A_{\text{hole}}}{V}\sqrt{\frac{RT}{2\pi M}}.

  • Always verify whether the kinetic relation incorporates the 2π2\pi geometric factor derived from integrating the velocity distribution over a hemisphere.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write down the complete effusion equation: keff=AholeVRT2πMk_{\text{eff}} = \frac{A_{\text{hole}}}{V}\sqrt{\frac{RT}{2\pi M}}.

  2. Isolate MM: M=RT2π(AholeV⋅keff)2M = \frac{RT}{2\pi}\left(\frac{A_{\text{hole}}}{V \cdot k_{\text{eff}}}\right)^2.

  3. Substitute the values: M=(8.314)(298.15)2π(1.50×10−8(2.50×10−3)(4.784×10−5))2≈0.0399 kg/mol=39.9 g/molM = \frac{(8.314)(298.15)}{2\pi}\left(\frac{1.50 \times 10^{-8}}{(2.50 \times 10^{-3})(4.784 \times 10^{-5})}\right)^2 \approx 0.0399\text{ kg/mol} = 39.9\text{ g/mol}.

  4. Calculate the mean speed with the corrected molar mass: v‾=8(8.314)(298.15)π(0.0399)≈398 m/s\overline{v} = \sqrt{\frac{8(8.314)(298.15)}{\pi(0.0399)}} \approx 398\text{ m/s}.

Final answer

(a) keff=4.78×10−5 s−1k_{\text{eff}} = 4.78 \times 10^{-5}\text{ s}^{-1}, (b) M=39.9 g/molM = 39.9\text{ g/mol}, (c) v‾=398 m/s\overline{v} = 398\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-check the algebraic form of kinetic effusion against the problem statement before isolating variables.

  • Review the derivation linking wall impingement rate Zw=14nVv‾Z_w = \frac{1}{4}n_V\overline{v} to the macroscopic pressure decay constant.

Lock it in

Similar question

01

A 1.00 L1.00\text{ L} glass bulb filled with Helium (M=4.00 g/molM = 4.00\text{ g/mol}) at 300 K300\text{ K} effuses through an aperture of area A=2.00×10−8 m2A = 2.00 \times 10^{-8}\text{ m}^2 into a vacuum. Calculate the effusion rate constant keffk_{\text{eff}} in s−1\text{s}^{-1}.

Answer

keff=7.97×10−3 s−1k_{\text{eff}} = 7.97 \times 10^{-3}\text{ s}^{-1}. Key steps: Convert V=1.00×10−3 m3V = 1.00 \times 10^{-3}\text{ m}^3 and M=0.00400 kg/molM = 0.00400\text{ kg/mol}. Compute RT2πM=(8.314)(300)2π(0.00400)=315 m/s\sqrt{\frac{RT}{2\pi M}} = \sqrt{\frac{(8.314)(300)}{2\pi (0.00400)}} = 315\text{ m/s}. Then keff=2.00×10−8 m21.00×10−3 m3×315 m/s=7.97×10−3 s−1k_{\text{eff}} = \frac{2.00 \times 10^{-8}\text{ m}^2}{1.00 \times 10^{-3}\text{ m}^3} \times 315\text{ m/s} = 7.97 \times 10^{-3}\text{ s}^{-1}.

02

An unknown gas effuses from a 5.00 L5.00\text{ L} chamber at 295 K295\text{ K} through a pinhole of area A=1.00×10−8 m2A = 1.00 \times 10^{-8}\text{ m}^2. The internal pressure falls from 50.0 kPa50.0\text{ kPa} to 40.0 kPa40.0\text{ kPa} in 5400 s5400\text{ s}. Find the molar mass MM of the gas in g/mol\text{g/mol}.

Answer

M≈28.1 g/molM \approx 28.1\text{ g/mol} (consistent with NX2\ce{N2} or CO\ce{CO}). Key steps: keff=−ln⁡(40/50)5400=4.132×10−5 s−1k_{\text{eff}} = -\frac{\ln(40/50)}{5400} = 4.132 \times 10^{-5}\text{ s}^{-1}. Using V=5.00×10−3 m3V = 5.00 \times 10^{-3}\text{ m}^3, calculate RT2πM=keffVA=20.66 m/s\sqrt{\frac{RT}{2\pi M}} = \frac{k_{\text{eff}}V}{A} = 20.66\text{ m/s}. Then M=(8.314)(295)2π(20.66)2=0.0281 kg/mol=28.1 g/molM = \frac{(8.314)(295)}{2\pi (20.66)^2} = 0.0281\text{ kg/mol} = 28.1\text{ g/mol}.

03

Two separate bulbs of volumes VA=2.00 LV_A = 2.00\text{ L} and VB=8.00 LV_B = 8.00\text{ L} are thermostatted at the same temperature and effuse through identical pinholes into high vacuum. If both bulbs initially contain Neon at 100 kPa100\text{ kPa}, determine the ratio of the half-lives of the internal pressure decay, t1/2,B/t1/2,At_{1/2, B} / t_{1/2, A}.

Answer

t1/2,B/t1/2,A=4.00t_{1/2, B} / t_{1/2, A} = 4.00. Key steps: Since keff=AVRT2πMk_{\text{eff}} = \frac{A}{V}\sqrt{\frac{RT}{2\pi M}}, the rate constant is inversely proportional to volume (keff∝1/Vk_{\text{eff}} \propto 1/V). Because t1/2=ln⁡2kefft_{1/2} = \frac{\ln 2}{k_{\text{eff}}}, the half-life is directly proportional to volume (t1/2∝Vt_{1/2} \propto V). Thus, t1/2,B/t1/2,A=VB/VA=8.00 L/2.00 L=4.00t_{1/2, B} / t_{1/2, A} = V_B / V_A = 8.00\text{ L} / 2.00\text{ L} = 4.00.

Loading workspace…