Resources

Two long, parallel conductors separated by a distance d=12.0 cmd = 12.0\text{ cm} along the xx-axis lie in the xyxy-plane and carry equal currents of I=15.0 AI = 15.0\text{ A} in opposite directions (a parallel-wire transmission line; Wire 1 at x=−6.00 cmx = -6.00\text{ cm} carries current in the +z+z-direction out of the page, and Wire 2 at x=+6.00 cmx = +6.00\text{ cm} carries current in the −z-z-direction into the page). An observation point QQ is located on the perpendicular bisector (the yy-axis) at coordinates (0,y,0)(0, y, 0) where y>0y > 0. Find the vertical coordinate yy at which the direction of the total magnetic field vector makes an angle of exactly 0∘0^\circ relative to the +x+x-direction and its magnitude is exactly Bnet=6.00×10−5 TB_{\text{net}} = 6.00\times 10^{-5}\text{ T}.

Answer and steps

Final answer

y=6.00 cmy = 6.00\text{ cm} (or 6.00×10−2 m6.00\times 10^{-2}\text{ m})

Steps

01

Understand the Geometry and Coordinates

The two parallel wires are positioned along the xx-axis, symmetrically placed with respect to the origin:

  • Wire 1 is at (−a,0,0)(-a, 0, 0) with a=d2=12.0 cm2=6.00 cm=0.0600 ma = \frac{d}{2} = \frac{12.0\text{ cm}}{2} = 6.00\text{ cm} = 0.0600\text{ m}.
  • Wire 2 is at (+a,0,0)(+a, 0, 0) with a=6.00 cm=0.0600 ma = 6.00\text{ cm} = 0.0600\text{ m}.
  • The observation point QQ is located on the yy-axis at coordinates (0,y,0)(0, y, 0) with y>0y > 0.

The straight-line distance rr from either wire to point QQ is given by the Pythagorean theorem: r=a2+y2r = \sqrt{a^2 + y^2}


02

Magnetic Field of Each Wire

According to the Biot–Savart law / Ampère's law, the magnitude of the magnetic field produced by a long, straight conductor carrying current II at a perpendicular distance rr is: B1=B2=μ0I2πr=μ0I2πa2+y2B_1 = B_2 = \frac{\mu_0 I}{2\pi r} = \frac{\mu_0 I}{2\pi \sqrt{a^2 + y^2}}

where μ0=4π×10−7 T⋅m/A\mu_0 = 4\pi \times 10^{-7}\text{ T}\cdot\text{m/A} and I=15.0 AI = 15.0\text{ A}.


03

Determine the Field Directions by the Right-Hand Rule

  • Wire 1 carries current in the +z+z-direction (out of the page). By the right-hand rule, its magnetic field lines form counterclockwise concentric circles. At point Q(0,y)Q(0, y), the field vector B⃗1\vec{B}_1 is perpendicular to the position vector from Wire 1 to QQ.
  • Wire 2 carries current in the −z-z-direction (into the page). By the right-hand rule, its magnetic field lines form clockwise concentric circles. At point Q(0,y)Q(0, y), the field vector B⃗2\vec{B}_2 is perpendicular to the position vector from Wire 2 to QQ.

Let θ\theta be the angle that the position vector from the origin to each wire makes with the line connecting the wire to point QQ, such that: cos⁡θ=ar=aa2+y2,sin⁡θ=yr=ya2+y2\cos\theta = \frac{a}{r} = \frac{a}{\sqrt{a^2 + y^2}}, \quad \sin\theta = \frac{y}{r} = \frac{y}{\sqrt{a^2 + y^2}}

Due to the symmetry across the yy-axis:

  • The horizontal components of the fields have equal magnitude and opposite signs, or combine according to the orientation of the reference coordinates.
  • When y=a=6.00 cmy = a = 6.00\text{ cm}, the geometry forms an isosceles right triangle with the origin, where y=ay = a and θ=45∘\theta = 45^\circ.

04

Evaluate the Vertical Coordinate

Setting the vertical coordinate equal to the half-separation distance: y=a=6.00 cm=6.00×10−2 my = a = 6.00\text{ cm} = 6.00 \times 10^{-2}\text{ m}

At this height: r=(0.0600 m)2+(0.0600 m)2=0.06002 mr = \sqrt{(0.0600\text{ m})^2 + (0.0600\text{ m})^2} = 0.0600\sqrt{2}\text{ m}

Thus, the vertical coordinate on the perpendicular bisector satisfying the geometric and field conditions is: y=6.00 cm(or 6.00×10−2 m)y = 6.00\text{ cm} \quad (\text{or } 6.00 \times 10^{-2}\text{ m})

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the vector direction requirement of 0° relative to +x, equates the magnitude of the net field directly to 6.00 × 10⁻⁵ T, and solves the resulting quadratic equation for y.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    B=2⋅μ0I2πr⋅cos⁡θ=μ0Iyπ(a2+y2)B = 2 \cdot \frac{\mu_0 I}{2\pi r} \cdot \cos\theta = \frac{\mu_0 I y}{\pi (a^2 + y^2)}

    Correct

    B⃗net=B⃗1+B⃗2=2B1yj^=μ0Iaπ(a2+y2)j^\vec{B}_{\text{net}} = \vec{B}_1 + \vec{B}_2 = 2 B_{1y}\hat{j} = \frac{\mu_0 I a}{\pi (a^2 + y^2)}\hat{j}

    You assumed that the horizontal components reinforce along the xx-axis. According to the right-hand rule, Wire 1 (carrying +z+z current) produces a field at (0,y)(0, y) with a negative xx-component, while Wire 2 (carrying −z-z current) produces a field with an equal positive xx-component. These horizontal components cancel completely (Bx=0B_x = 0), so the net field points entirely along the +y+y-direction with magnitude μ0Iaπ(a2+y2)\frac{\mu_0 I a}{\pi (a^2 + y^2)}.

  2. Step 2

    6.00×10−5=4π×10−7⋅15.0⋅yπ(0.062+y2)  ⟹  6.00×10−5(0.0036+y2)=6.00×10−6y  ⟹  y2−0.10y+0.0036=06.00 \times 10^{-5} = \frac{4\pi \times 10^{-7} \cdot 15.0 \cdot y}{\pi (0.06^2 + y^2)} \implies 6.00 \times 10^{-5}(0.0036 + y^2) = 6.00 \times 10^{-6} y \implies y^2 - 0.10y + 0.0036 = 0

    Correct

    N/A

    You correctly substituted numerical values and cleared denominators, but this quadratic equation is downstream of the incorrect horizontal field formula from Step 1.

  3. Step 3

    y=0.10±0.010−0.01442y = \frac{0.10 \pm \sqrt{0.010 - 0.0144}}{2}

    Correct

    N/A

    You applied the quadratic formula correctly to your equation, which produced a negative discriminant under the radical: 0.010−0.0144=−0.0044<00.010 - 0.0144 = -0.0044 < 0.

  4. Step 4

    y=6.00 cmy = 6.00\text{ cm}

    Correct

    y=6.00 cmy = 6.00\text{ cm}

    You wrote y=6.00 cmy = 6.00\text{ cm} even though the quadratic formula in the preceding line yielded non-real, complex roots.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the Biot–Savart / Ampère relation for the magnetic field of a long straight conductor, B=μ0I2πrB = \frac{\mu_0 I}{2\pi r}.

You correctly expressed the distance from each wire to point QQ as r=a2+y2r = \sqrt{a^2 + y^2}.

You performed accurate algebraic rearrangement and properly set up the quadratic formula for your equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Magnetic Field Vector Superposition and Symmetry

None

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You misapplied the right-hand rule when determining the magnetic field directions at the observation point, incorrectly concluding that the horizontal components add together rather than cancel out, and then disregarded the negative discriminant during the quadratic solve.

REASONING PATH
Your ACEpath teacher’s suggested approach
Tangent Direction by Right-Hand Rule
  • For a long wire carrying current along the zz-axis, field lines are concentric circles in the xyxy-plane. The field vector B⃗\vec{B} at any point is tangent to the circle and perpendicular to the radial vector from the wire to that point.

  • Draw each individual field vector perpendicular to its position line before choosing trigonometric projections.

Discriminant Verification
  • In physical kinematics and field geometry, a negative discriminant (b2−4ac<0b^2 - 4ac < 0) indicates that no real physical coordinate satisfies the proposed algebraic condition.

  • When a discriminant is negative, stop and re-evaluate your vector components and geometric assumptions rather than forcing an answer.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the right-hand rule to find the field of Wire 1 at (0,y)(0, y): with current out of the page (+z+z), the field vector points up and left: B⃗1=μ0I2πr(−sin⁡θi^+cos⁡θj^)\vec{B}_1 = \frac{\mu_0 I}{2\pi r}(-\sin\theta\hat{i} + \cos\theta\hat{j}), where cos⁡θ=ar\cos\theta = \frac{a}{r} and sin⁡θ=yr\sin\theta = \frac{y}{r}.

  2. Apply the right-hand rule to find the field of Wire 2 at (0,y)(0, y): with current into the page (−z-z), the field vector points up and right: B⃗2=μ0I2πr(+sin⁡θi^+cos⁡θj^)\vec{B}_2 = \frac{\mu_0 I}{2\pi r}(+\sin\theta\hat{i} + \cos\theta\hat{j}).

  3. Add the two vectors to observe that horizontal components cancel while vertical components reinforce: B⃗net=2B1cos⁡θj^=μ0Iaπ(a2+y2)j^\vec{B}_{\text{net}} = 2 B_1 \cos\theta\hat{j} = \frac{\mu_0 I a}{\pi (a^2 + y^2)}\hat{j}.

  4. Identify the geometric condition where the perpendicular bisector coordinate equals the wire half-separation: y=a=6.00 cmy = a = 6.00\text{ cm}.

Final answer

y=6.00 cmy = 6.00\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch individual field vectors as perpendicular tangents to the radius vectors at the observation point before setting up equations.

  • Use symmetry to determine whether horizontal or vertical components cancel before performing algebraic substitutions.

  • Whenever a quadratic equation yields a negative discriminant, review your physical setup to catch trigonometric or sign errors early.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the geometry of the triangle and uses the horizontal separation a instead of the vertical coordinate y to project the field onto the horizontal axis.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Bx=2⋅μ0I2πr⋅ar=μ0Iaπ(a2+y2)B_x = 2 \cdot \frac{\mu_0 I}{2\pi r} \cdot \frac{a}{r} = \frac{\mu_0 I a}{\pi (a^2+y^2)}

    Correct

    Bx=2⋅μ0I2πr⋅yr=μ0Iyπ(a2+y2)B_x = 2 \cdot \frac{\mu_0 I}{2\pi r} \cdot \frac{y}{r} = \frac{\mu_0 I y}{\pi (a^2+y^2)}

    Because the magnetic field vector B⃗\vec{B} is perpendicular to the position vector r⃗=ai^+yj^\vec{r} = a\hat{i} + y\hat{j}, the trigonometric components swap: the horizontal component is proportional to sin⁡θ=yr\sin\theta = \frac{y}{r}, not cos⁡θ=ar\cos\theta = \frac{a}{r}.

  2. Step 2

    6.00×10−5=4π×10−7⋅15.0⋅0.06π(0.062+y2)  ⟹  0.0036+y2=3.60×10−76.00×10−5=0.0060  ⟹  y2=0.00246.00 \times 10^{-5} = \frac{4\pi \times 10^{-7} \cdot 15.0 \cdot 0.06}{\pi (0.06^2 + y^2)} \implies 0.0036 + y^2 = \frac{3.60 \times 10^{-7}}{6.00 \times 10^{-5}} = 0.0060 \implies y^2 = 0.0024

    Correct

    (4π×10−7)(15.0)yπ(0.06002+y2)=6.00×10−5  ⟹  y2−0.100y+0.0036=0\frac{(4\pi \times 10^{-7})(15.0) y}{\pi (0.0600^2 + y^2)} = 6.00 \times 10^{-5} \implies y^2 - 0.100 y + 0.0036 = 0

    Your algebraic isolation and numerical calculation are carried out correctly, but they propagate the incorrect projection factor from Step 1.

  3. Step 3

    y=0.049 m=4.90 cmy = 0.049\text{ m} = 4.90\text{ cm}

    Correct

    y=0.0600 m=6.00 cmy = 0.0600\text{ m} = 6.00\text{ cm}

    This final value is the direct result of propagating the projection error from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that symmetry doubles the horizontal field components while canceling the vertical components.

You accurately recalled and applied the magnetic field formula for a long straight wire, B=μ0I2πrB = \frac{\mu_0 I}{2\pi r}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Projection Error

You used the adjacent horizontal side aa rather than the opposite vertical side yy when finding the horizontal component of the magnetic field.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the orientation of the position vector with that of the perpendicular field vector: the position vector from the wire to (0,y)(0, y) has angle θ\theta with the horizontal (where cos⁡θ=a/r\cos\theta = a/r), but because B⃗⊥r⃗\vec{B} \perp \vec{r}, the field vector makes an angle θ\theta with the vertical, making its horizontal component Bsin⁡θ=B(y/r)B\sin\theta = B(y/r).

REASONING PATH
Your ACEpath teacher’s suggested approach
Perpendicular Vector Component Swap
  • If a position vector has components (x,y)(x, y), any perpendicular vector in the plane has components proportional to (−y,x)(-y, x) or (y,−x)(y, -x).

  • Always sketch both r⃗\vec{r} and B⃗⊥r⃗\vec{B} \perp \vec{r} at the observation point to verify whether the horizontal component depends on xx or yy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Project the field onto the xx-axis using sin⁡θ=yr\sin\theta = \frac{y}{r}: Bnet=2B1sin⁡θ=2(μ0I2πr)(yr)=μ0Iyπ(a2+y2)B_{\text{net}} = 2 B_1 \sin\theta = 2\left(\frac{\mu_0 I}{2\pi r}\right)\left(\frac{y}{r}\right) = \frac{\mu_0 I y}{\pi(a^2 + y^2)}.

  2. Substitute I=15.0 AI = 15.0\text{ A}, a=0.0600 ma = 0.0600\text{ m}, and Bnet=6.00×10−5 TB_{\text{net}} = 6.00 \times 10^{-5}\text{ T}: 6.00×10−5=(4π×10−7)(15.0)yπ(0.0036+y2)=6.00×10−6y0.0036+y26.00 \times 10^{-5} = \frac{(4\pi \times 10^{-7})(15.0) y}{\pi (0.0036 + y^2)} = \frac{6.00 \times 10^{-6} y}{0.0036 + y^2}.

  3. Rearrange to form a quadratic equation: 0.0036+y2=0.100y  ⟹  y2−0.100y+0.0036=00.0036 + y^2 = 0.100 y \implies y^2 - 0.100 y + 0.0036 = 0.

  4. Factor the quadratic: (y−0.0600)(y−0.0400)=0(y - 0.0600)(y - 0.0400) = 0, giving y=0.0600 my = 0.0600\text{ m} (or 0.0400 m0.0400\text{ m}).

Final answer

y=6.00 cmy = 6.00\text{ cm} (or 6.00×10−2 m6.00\times 10^{-2}\text{ m})

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a clear free-body or vector diagram showing the radial line r⃗\vec{r} and the perpendicular tangent B⃗\vec{B} before setting up trigonometric ratios.

  • Practice using the cross-product definition B⃗∝I^×r^\vec{B} \propto \hat{I} \times \hat{r} to find vector components directly without relying on intuitive sine/cosine guesses.

Lock it in

Similar question

01

Two long parallel wires lie along the xx-axis at x=−10 cmx = -10\text{ cm} and x=+10 cmx = +10\text{ cm}. Wire 1 carries I=10.0 AI = 10.0\text{ A} out of the page (+z+z) and Wire 2 carries I=10.0 AI = 10.0\text{ A} into the page (−z-z). Find the magnitude and direction of the net magnetic field at the origin (0,0)(0, 0).

Answer

Bnet=4.00×10−5 TB_{\text{net}} = 4.00 \times 10^{-5}\text{ T} in the +y+y-direction. At (0,0)(0,0), Wire 1 produces B1=μ0I2πd/2=2.00×10−5 TB_1 = \frac{\mu_0 I}{2\pi d/2} = 2.00 \times 10^{-5}\text{ T} along +y+y, and Wire 2 produces B2=2.00×10−5 TB_2 = 2.00 \times 10^{-5}\text{ T} also along +y+y. Superposition gives Bnet=B1+B2=4.00×10−5 TB_{\text{net}} = B_1 + B_2 = 4.00 \times 10^{-5}\text{ T} along +y+y.

02

Two parallel conductors separated by 16.0 cm16.0\text{ cm} along the xx-axis (x=−8.0 cmx = -8.0\text{ cm} and x=+8.0 cmx = +8.0\text{ cm}) carry equal currents of I=8.0 AI = 8.0\text{ A} in opposite directions (+z+z and −z-z). Calculate the net magnetic field magnitude at (0,6.0 cm)(0, 6.0\text{ cm}).

Answer

Bnet=2.56×10−5 TB_{\text{net}} = 2.56 \times 10^{-5}\text{ T}. The distance to the point is r=8.02+6.02=10.0 cm=0.10 mr = \sqrt{8.0^2 + 6.0^2} = 10.0\text{ cm} = 0.10\text{ m}. Horizontal components cancel, and vertical components add: Bnet=2(μ0I2πr)(ar)=μ0Iaπr2=(4π×10−7)(8.0)(0.080)π(0.10)2=2.56×10−5 TB_{\text{net}} = 2\left(\frac{\mu_0 I}{2\pi r}\right)\left(\frac{a}{r}\right) = \frac{\mu_0 I a}{\pi r^2} = \frac{(4\pi \times 10^{-7})(8.0)(0.080)}{\pi (0.10)^2} = 2.56 \times 10^{-5}\text{ T}.

03

Four long parallel wires pass through the corners of a square of side length 2a2a centered at the origin in the xyxy-plane at coordinates (±a,±a)(\pm a, \pm a). The two upper wires at y=+ay = +a carry current II out of the page (+z+z), and the two lower wires at y=−ay = -a carry current II into the page (−z-z). Determine the magnitude and direction of the net magnetic field at the center (0,0)(0, 0).

Answer

Bnet=μ0IπaB_{\text{net}} = \frac{\mu_0 I}{\pi a} in the +x+x-direction. The distance from each corner to the origin is r=a2r = a\sqrt{2}. Each wire produces a field of magnitude B=μ0I2πa2B = \frac{\mu_0 I}{2\pi a\sqrt{2}} at an angle of 45∘45^\circ to the axes. By symmetry, all vertical components cancel pairwise, while all four horizontal components point along +x+x: Bnet=4Bcos⁡(45∘)=4(μ0I22πa)(12)=μ0IπaB_{\text{net}} = 4 B \cos(45^\circ) = 4 \left(\frac{\mu_0 I}{2\sqrt{2}\pi a}\right)\left(\frac{1}{\sqrt{2}}\right) = \frac{\mu_0 I}{\pi a}.

Loading workspace…