Resources
A block is pulled across a flat, frictionless horizontal surface by a continuous force of magnitude acting at an angle above the horizontal. Starting from rest, the block moves horizontally through a displacement of and attains a final kinetic energy of . Determine: (a) the work done on the block, (b) the pulling angle of the force, and (c) the final speed of the block.
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Part (a): Finding the Work Done on the Block
By the Work-Energy Theorem, the net work done on an object equals the change in its kinetic energy:
Because the surface is frictionless and both the downward gravitational force and the upward normal force act perpendicular to the horizontal displacement, neither vertical force does work. Therefore, the net work is simply the work done by the applied pulling force.
The block starts from rest () and reaches a final kinetic energy of :
Part (b): Determining the Pulling Angle
The work done by a constant force directed at an angle above the horizontal over a displacement is given by:
Substitute the known values into the equation:
Solve for :
Taking the inverse cosine:
Common Pitfall: Only the component of the force parallel to the displacement () performs work. Do not calculate work using the full force magnitude without resolving it along the direction of motion.
Part (c): Calculating the Final Speed
The kinetic energy of an object is related to its mass and speed by:
Substitute and :
Solve for :
Typical errors
01 The student forgets that the force acts at an angle and incorrectly calculates work directly as force times displacement rather than using the work-energy theorem, causing downstream calculation errors in the angle.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You calculated the work as , but the applied force acts at an angle above the horizontal. By the work-energy theorem on a frictionless surface, the net work done on the block equals its change in kinetic energy, so .
- Step 2Correct
You correctly recalled the formula , but substituting your incorrect value of forced and yielded instead of .
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly solved part (c) by relating kinetic energy to mass and velocity.
You correctly recalled that work depends on the cosine of the angle between force and displacement in part (b).
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated work as simply force times displacement () without noticing that the force is angled and that the total work done is already determined by the given change in kinetic energy ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Use the Work-Energy Theorem First
Whenever the initial and final kinetic energies are known, find the net work directly from before attempting to calculate force components.
- Account for Angles in Work
When a force acts at an angle to the displacement, only the parallel component performs work. Use to solve for the unknown angle .
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the work-energy theorem: .
Set up the work definition: .
Solve for the angle: .
(a) ; (b) ; (c)
02 The student mistakenly uses sin(θ) instead of cos(θ) for the horizontal work component of the force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The displacement is along the horizontal axis, so only the horizontal component of the force (, which is adjacent to angle ) does work. The vertical component () is perpendicular to the motion and does zero work.
- Step 3Correct
Your algebraic solving and inverse trigonometric evaluation were executed correctly, but they inherited the incorrect sine function from the previous step.
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and applied the work-energy theorem to find the net work done in part (a).
You accurately substituted values into the kinetic energy formula to determine the final speed in part (c).
You showed clean algebraic isolation and inverse trigonometric calculations in your work.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou selected the sine function instead of the cosine function when setting up the work done by a force at an angle, overlooking that the component parallel to the horizontal displacement is adjacent to the angle .
REASONING PATH
Your ACEpath teacher’s suggested approach- Work Definition via Dot Product
, where is the angle between the force vector and the displacement vector.
Always draw a vector diagram and project the force onto the line of motion; use cosine for the adjacent component parallel to displacement.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute , , and into :
(a) ; (b) ; (c)
03 The student forgets to take the square root of v_f² when solving for the final speed from kinetic energy.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
Dividing by gives , not . You need to take the principal square root of both sides to isolate the speed .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the work-energy theorem to identify that .
You resolved the force component parallel to displacement and calculated the correct angle .
You recalled and substituted into the kinetic energy formula accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou dropped the exponent on when isolating the variable, treating as if it were already .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn algebraic equations of the form , isolating the variable requires two inverse operations: dividing by to get , and then taking the square root to find . Dropping the exponent prematurely leads to an unrooted value with mismatched physical dimensions.
REASONING PATH
Your ACEpath teacher’s suggested approach- Keep the exponent until you apply the inverse operation
If an equation contains , maintain the exponent on the variable side until you explicitly take the square root of both sides.
Write as an intermediate step before writing .
- Perform a unit and order-of-magnitude sanity check
Dividing energy () by mass () yields units of velocity squared ().
Verify that your final isolated quantity carries units of speed () by ensuring the radical has been evaluated.
CORRECTED PATH
ACEpath Teacher's DemonstrationIsolate by dividing both sides by : .
Take the principal square root of both sides: .
(a) ; (b) ; (c)
Lock it in
What does the Work-Energy Theorem state for an object moving along a frictionless horizontal surface?
. The net work done equals the change in kinetic energy, regardless of the angle of the applied force.
Similar question
A sled starts from rest on frictionless horizontal ice. A rope exerts a constant tension of at an angle of above the horizontal over a distance of . Find (a) the work done by the tension, and (b) the final speed of the sled.
Answer
(a) . (b) By the work-energy theorem, .
A crate starts from rest on a frictionless floor. A worker pulls it with a constant force of directed at an angle above the horizontal. After moving , the crate has a kinetic energy of . Determine (a) the work done on the crate, and (b) the angle .
Answer
(a) . (b) .
A object slides along a rough horizontal surface with a constant kinetic friction force . A constant pulling force acts at an angle above the horizontal. Starting from rest, the object travels . Find (a) the work done by the pulling force, (b) the net work done on the object, and (c) the final kinetic energy.
Answer
(a) . (b) , so . (c) .