Resources

A rigid steel cylinder with an internal volume of 15.0 L15.0\text{ L} is filled with 2.40 mol2.40\text{ mol} of helium gas at an absolute temperature of 295 K295\text{ K}. Assuming ideal gas behavior, calculate the absolute pressure exerted by the gas inside the cylinder in kilopascals (kPa\text{kPa}). Use R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer and steps

Final answer

3.93×102 kPa3.93 \times 10^2\text{ kPa}

Steps

To find the absolute pressure exerted by the gas, apply the ideal gas law:

PV=nRTP V = n R T

where:

  • PP is the absolute pressure in pascals (Pa\text{Pa}),
  • VV is the volume in cubic meters (m3\text{m}^3),
  • nn is the amount of substance in moles (mol\text{mol}),
  • R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}) is the universal gas constant,
  • TT is the absolute temperature in kelvins (K\text{K}).

Step 1: Convert units to standard SI units The volume is given in liters (L\text{L}). Convert liters to cubic meters (m3\text{m}^3):

V=15.0 L=15.0×10−3 m3V = 15.0\text{ L} = 15.0 \times 10^{-3}\text{ m}^3

The temperature is already in kelvins (T=295 KT = 295\text{ K}) and the amount of gas is in moles (n=2.40 moln = 2.40\text{ mol}).

Common Pitfall: Using volume in liters directly with R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}) yields an answer off by a factor of 10310^3. Always ensure volume is expressed in m3\text{m}^3 when using standard SI units.

Step 2: Rearrange the ideal gas equation for pressure

P=nRTVP = \frac{n R T}{V}

Step 3: Substitute the known values and calculate PP

P=(2.40 mol)⋅(8.314 J/(mol⋅K))⋅(295 K)15.0×10−3 m3P = \frac{(2.40\text{ mol}) \cdot (8.314\text{ J}/(\text{mol}\cdot\text{K})) \cdot (295\text{ K})}{15.0 \times 10^{-3}\text{ m}^3}

Evaluating the numerator:

nRT=2.40⋅8.314⋅295≈5886.3 Jn R T = 2.40 \cdot 8.314 \cdot 295 \approx 5886.3\text{ J}

Dividing by the volume:

P=5886.3 J0.0150 m3≈3.924×105 PaP = \frac{5886.3\text{ J}}{0.0150\text{ m}^3} \approx 3.924 \times 10^5\text{ Pa}

Step 4: Convert pressure to kilopascals (kPa\text{kPa}) Since 1 kPa=103 Pa1\text{ kPa} = 10^3\text{ Pa}:

P=3.924×105 Pa103 Pa/kPa≈3.93×102 kPaP = \frac{3.924 \times 10^5\text{ Pa}}{10^3\text{ Pa}/\text{kPa}} \approx 3.93 \times 10^2\text{ kPa}

Expressed to three significant figures, the absolute pressure inside the cylinder is 3.93×102 kPa3.93 \times 10^2\text{ kPa}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert liters to cubic meters when using the SI gas constant, resulting in a pressure that is underestimated by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=nRTVP = \frac{nRT}{V}

  2. Step 2

    P=(2.40×8.314×295)15.0  ⟹  P=5886.31215.0=392.42 PaP = \frac{(2.40 \times 8.314 \times 295)}{15.0} \implies P = \frac{5886.312}{15.0} = 392.42\text{ Pa}

    Correct

    P=(2.40 mol)(8.314 J/(mol⋅K))(295 K)15.0×10−3 m3≈3.924×105 PaP = \frac{(2.40\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(295\text{ K})}{15.0 \times 10^{-3}\text{ m}^3} \approx 3.924 \times 10^5\text{ Pa}

    You substituted V=15.0V = 15.0 directly in liters. Since the universal gas constant R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}) is expressed in base SI units, the volume must be converted to cubic meters (15.0 L=15.0×10−3 m315.0\text{ L} = 15.0 \times 10^{-3}\text{ m}^3), which yields P≈3.924×105 PaP \approx 3.924 \times 10^5\text{ Pa}.

  3. Step 3

    P=0.392 kPaP = 0.392\text{ kPa}

    Correct

    P=3.924×105 Pa103 Pa/kPa≈3.93×102 kPaP = \frac{3.924 \times 10^5\text{ Pa}}{10^3\text{ Pa}/\text{kPa}} \approx 3.93 \times 10^2\text{ kPa}

    You correctly divided your pressure value by 10001000 to convert from pascals to kilopascals, but the final numerical value is off by a factor of 10310^3 due to the unit error in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated pressure from the ideal gas law equation.

You correctly identified and substituted the values for amount of substance, temperature, and the universal gas constant.

You carried out the arithmetic and the conversion from pascals to kilopascals correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the required SI base unit for volume when working with R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}). In the SI system, pressure in pascals (N/m2\text{N}/\text{m}^2) requires volume to be measured in cubic meters (m3\text{m}^3), not liters (L\text{L}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Units with the Gas Constant
  • When R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}), pressure must be in pascals (Pa\text{Pa}) and volume must be in cubic meters (m3\text{m}^3).

  • Before substituting into PV=nRTPV = nRT, always convert volume in liters to cubic meters using 1 L=10−3 m31\text{ L} = 10^{-3}\text{ m}^3.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the volume from liters to cubic meters: V=15.0 L=15.0×10−3 m3=0.0150 m3V = 15.0\text{ L} = 15.0 \times 10^{-3}\text{ m}^3 = 0.0150\text{ m}^3.

  2. Substitute the standard SI values into the rearranged formula: P=(2.40 mol)(8.314 J/(mol⋅K))(295 K)15.0×10−3 m3≈3.924×105 PaP = \frac{(2.40\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(295\text{ K})}{15.0 \times 10^{-3}\text{ m}^3} \approx 3.924 \times 10^5\text{ Pa}.

  3. Convert the absolute pressure from pascals to kilopascals: P=3.924×105 Pa103 Pa/kPa≈3.93×102 kPaP = \frac{3.924 \times 10^5\text{ Pa}}{10^3\text{ Pa}/\text{kPa}} \approx 3.93 \times 10^2\text{ kPa}.

Final answer

3.93×102 kPa3.93 \times 10^2\text{ kPa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down explicit units alongside every number during substitution to verify dimensional consistency.

  • Practice converting between common metric volume units: 1 m3=103 L=106 cm31\text{ m}^3 = 10^3\text{ L} = 10^6\text{ cm}^3.

OverviewACEpath Teacher's Diagnosis

02 The student reflexively adds 273 to the temperature despite it already being provided in Kelvin, leading to an erroneously high calculated pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=15.0 L=0.015 m3V = 15.0\text{ L} = 0.015\text{ m}^3

  2. Step 2

    T=295+273=568 KT = 295 + 273 = 568\text{ K}

    Correct

    T=295 KT = 295\text{ K}

    The problem already stated an absolute temperature of 295 K295\text{ K}, so adding 273273 converted an already-absolute temperature as if it were in degrees Celsius.

  3. Step 3

    P=nRTV  ⟹  P=(2.40×8.314×568)0.015P = \frac{nRT}{V} \implies P = \frac{(2.40 \times 8.314 \times 568)}{0.015}

    Correct

    P=nRTV=2.40×8.314×2950.015P = \frac{nRT}{V} = \frac{2.40 \times 8.314 \times 295}{0.015}

    Your algebraic formula and substitution were structurally sound, but they inherited the incorrect temperature value from the previous step.

  4. Step 4

    P=11333.60.015=755573 Pa=756 kPaP = \frac{11333.6}{0.015} = 755573\text{ Pa} = 756\text{ kPa}

    Correct

    P=5886.30.015≈3.924×105 Pa≈392 kPaP = \frac{5886.3}{0.015} \approx 3.924 \times 10^5\text{ Pa} \approx 392\text{ kPa} (or 3.93×102 kPa3.93 \times 10^2\text{ kPa})

    Your arithmetic and conversion from pascals to kilopascals were carried out properly, but the final value reflects the doubled temperature.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the ideal gas equation PV=nRTPV = nRT and rearranged it for pressure.

You correctly converted the volume from liters to cubic meters using 1 L=10−3 m31\text{ L} = 10^{-3}\text{ m}^3.

You correctly converted the calculated pressure in pascals to kilopascals.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unnecessary Temperature Conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reflexively applied the Celsius-to-Kelvin conversion formula (T=TC+273T = T_C + 273) without checking the original unit, overlooking that the given value was already an absolute temperature in kelvins.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inspect the Given Temperature Unit
  • Only add 273.15273.15 when temperature is provided in Celsius (∘C^\circ\text{C}). If it is already in kelvins (K\text{K}), use the value directly.

  • Circle the unit of temperature in the problem statement before beginning your calculations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the given absolute temperature directly: T=295 KT = 295\text{ K}.

  2. Substitute into P=nRTVP = \frac{nRT}{V}: P=(2.40 mol)(8.314 J/(mol⋅K))(295 K)0.0150 m3P = \frac{(2.40\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(295\text{ K})}{0.0150\text{ m}^3}.

  3. Evaluate the numerator: nRT≈5886.3 JnRT \approx 5886.3\text{ J}.

  4. Compute the pressure: P=5886.30.0150≈3.924×105 Pa=3.924×102 kPaP = \frac{5886.3}{0.0150} \approx 3.924 \times 10^5\text{ Pa} = 3.924 \times 10^2\text{ kPa}.

Final answer

3.93×102 kPa3.93 \times 10^2\text{ kPa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before applying T=TC+273T = T_C + 273, verify whether the problem gives ∘C^\circ\text{C} or K\text{K}.

  • Practice checking input units against SI base units before entering them into formulas.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies by 1000 instead of dividing by 1000 when converting from pascals to kilopascals.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=15.0×10−3 m3V = 15.0 \times 10^{-3}\text{ m}^3

  2. Step 2

    P=nRTV  ⟹  P=2.40×8.314×29515.0×10−3  ⟹  P=392421 PaP = \frac{nRT}{V} \implies P = \frac{2.40 \times 8.314 \times 295}{15.0 \times 10^{-3}} \implies P = 392421\text{ Pa}

  3. Step 3

    P=392421×1000=3.92×108 kPaP = 392421 \times 1000 = 3.92 \times 10^8\text{ kPa}

    Correct

    P=392421 Pa1000 Pa/kPa≈3.92×102 kPaP = \frac{392421\text{ Pa}}{1000\text{ Pa}/\text{kPa}} \approx 3.92 \times 10^2\text{ kPa}

    Since 1 kPa=1000 Pa1\text{ kPa} = 1000\text{ Pa}, converting from a smaller unit (pascals) to a larger unit (kilopascals) requires dividing by 10001000, not multiplying.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the gas volume from liters to standard SI cubic meters.

You isolated pressure properly in the ideal gas equation PV=nRTPV = nRT.

You substituted the values with the correct gas constant and calculated the pressure in pascals accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix conversion error

You inverted the conversion factor between pascals and kilopascals by multiplying by 10001000.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of metric prefix conversion when moving from base units to kilo-prefixed units.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Size Check
  • A kilopascal is 10001000 times larger than a pascal (1 kPa=103 Pa1\text{ kPa} = 10^3\text{ Pa}).

  • When expressing a quantity in a larger unit, the numerical value must become smaller, so divide by 10310^3.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the calculated pressure in pascals: P≈3.924×105 PaP \approx 3.924 \times 10^5\text{ Pa}.

  2. Apply the conversion factor 1 kPa103 Pa\frac{1\text{ kPa}}{10^3\text{ Pa}} by dividing by 10001000.

Final answer

3.92×102 kPa3.92 \times 10^2\text{ kPa} (or 3.93×102 kPa3.93 \times 10^2\text{ kPa})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice dimensional analysis with explicit conversion fractions to ensure units cancel properly.

  • Perform a quick magnitude sanity check: converting to a unit with the prefix 'kilo-' should always decrease the numerical value by a factor of 10001000.

Lock it in

Similar question

01

A sample of neon gas occupies 8.00 L8.00\text{ L} at 310 K310\text{ K} and exerts a pressure of 150 kPa150\text{ kPa}. How many moles of neon are in the container? Use R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer

Convert units to SI: P=150×103 PaP = 150 \times 10^3\text{ Pa}, V=8.00×10−3 m3V = 8.00 \times 10^{-3}\text{ m}^3. Apply n=PVRT=(150×103)(8.00×10−3)(8.314)(310)=12002577.34≈0.466 moln = \frac{PV}{RT} = \frac{(150 \times 10^3)(8.00 \times 10^{-3})}{(8.314)(310)} = \frac{1200}{2577.34} \approx 0.466\text{ mol}.

02

A 5.00 L5.00\text{ L} rigid vessel contains 1.25 mol1.25\text{ mol} of argon at an absolute pressure of 620 kPa620\text{ kPa}. What is the temperature of the gas in kelvins? Use R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer

Convert units to SI: P=620×103 PaP = 620 \times 10^3\text{ Pa}, V=5.00×10−3 m3V = 5.00 \times 10^{-3}\text{ m}^3. Solve for temperature: T=PVnR=(620×103)(5.00×10−3)(1.25)(8.314)=310010.3925≈298 KT = \frac{PV}{nR} = \frac{(620 \times 10^3)(5.00 \times 10^{-3})}{(1.25)(8.314)} = \frac{3100}{10.3925} \approx 298\text{ K}.

03

A compressed gas cylinder with an internal volume of 2500 cm32500\text{ cm}^3 holds 0.850 mol0.850\text{ mol} of nitrogen gas at 22.0∘C22.0^\circ\text{C}. Calculate the absolute pressure of the gas in megapascals (MPa\text{MPa}). Use R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer

Convert all quantities to base SI units: V=2500×10−6 m3=2.50×10−3 m3V = 2500 \times 10^{-6}\text{ m}^3 = 2.50 \times 10^{-3}\text{ m}^3, T=22.0+273.15=295.15 KT = 22.0 + 273.15 = 295.15\text{ K}. Calculate pressure: P=nRTV=(0.850)(8.314)(295.15)2.50×10−3≈8.342×105 Pa=0.834 MPaP = \frac{nRT}{V} = \frac{(0.850)(8.314)(295.15)}{2.50 \times 10^{-3}} \approx 8.342 \times 10^5\text{ Pa} = 0.834\text{ MPa}.

Loading workspace…