Resources

In the thermosphere at an altitude of 300 km300\text{ km}, the rarefied gas has an extraordinarily high kinetic temperature of T=1.20×103 KT = 1.20 \times 10^3\text{ K}, but the number density approaches the extreme asymptotic vacuum limit of only N/V=1.00×1015 molecules/m3N/V = 1.00 \times 10^{15}\text{ molecules}/\text{m}^3. Model the gas particles as an ideal monatomic gas with average mass per particle m‾=2.66×10−26 kg\overline{m} = 2.66 \times 10^{-26}\text{ kg} (atomic oxygen). Using Boltzmann's constant kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J}/\text{K}: (a) calculate the average translational kinetic energy per particle K‾\overline{K}, (b) calculate the total internal energy UU contained in a volume of V=1.00 m3V = 1.00\text{ m}^3, and (c) explain why an astronaut exposed to this medium would freeze rather than burn despite the extreme temperature.

Answer and steps

Final answer

(a) K‾=2.49×10−20 J\overline{K} = 2.49 \times 10^{-20}\text{ J}; (b) U=2.49×10−5 JU = 2.49 \times 10^{-5}\text{ J}; (c) Because the molecular density is extremely low, the total internal energy per cubic meter is negligible (2.49×10−5 J/m32.49 \times 10^{-5}\text{ J}/\text{m}^3), resulting in an infinitesimal rate of heat conduction to the astronaut compared to the astronaut's rapid heat loss via thermal radiation.

Steps

Part (a): Average Translational Kinetic Energy per Particle

According to the kinetic theory of gases, temperature is an intensive property directly proportional to the average translational kinetic energy of the particles. For a monatomic ideal gas with three translational degrees of freedom, the equipartition theorem gives:

K‾=32kBT\overline{K} = \frac{3}{2}k_B T

Substitute the given values into the equation:

K‾=32(1.381×10−23 J/K)(1.20×103 K)\overline{K} = \frac{3}{2}\left(1.381 \times 10^{-23}\text{ J/K}\right)\left(1.20 \times 10^3\text{ K}\right)

K‾=2.4858×10−20 J≈2.49×10−20 J\overline{K} = 2.4858 \times 10^{-20}\text{ J} \approx 2.49 \times 10^{-20}\text{ J}


Part (b): Total Internal Energy in V=1.00 m3V = 1.00\text{ m}^3

The total internal energy UU of an ideal monatomic gas is an extensive property equal to the sum of the kinetic energies of all its individual particles:

U=NK‾=(NV)VK‾U = N\overline{K} = \left(\frac{N}{V}\right) V \overline{K}

Given the volume V=1.00 m3V = 1.00\text{ m}^3 and the particle density N/V=1.00×1015 molecules/m3N/V = 1.00 \times 10^{15}\text{ molecules/m}^3:

N=(1.00×1015 m−3)(1.00 m3)=1.00×1015 moleculesN = \left(1.00 \times 10^{15}\text{ m}^{-3}\right)\left(1.00\text{ m}^3\right) = 1.00 \times 10^{15}\text{ molecules}

Multiply by the average kinetic energy per particle:

U=(1.00×1015)(2.4858×10−20 J)=2.49×10−5 JU = \left(1.00 \times 10^{15}\right)\left(2.4858 \times 10^{-20}\text{ J}\right) = 2.49 \times 10^{-5}\text{ J}


Part (c): Why an Astronaut Freezes Rather Than Burns

To understand this apparent paradox, distinguish between temperature, internal energy, and heat transfer:

  1. Temperature vs. Total Energy: Temperature measures the average kinetic energy per molecule (K‾∝T\overline{K} \propto T). Because each individual molecule moves rapidly, the kinetic temperature is extremely high (1.20×103 K1.20 \times 10^3\text{ K}). However, the molecular density is virtually a vacuum compared to sea level (∼2.5×1025 molecules/m3\sim 2.5 \times 10^{25}\text{ molecules/m}^3), meaning the total internal energy per cubic meter is microscopic (2.49×10−5 J/m32.49 \times 10^{-5}\text{ J/m}^3).
  2. Heat Transfer Mechanism: Heat sensation and thermal equilibrium depend on the rate of energy transfer (dQ/dt\text{d}Q/\text{d}t).

    • Collisional conduction/convection: Because collisions with gas particles are extremely rare, the rate of heat delivered to the astronaut by the surrounding gas is practically zero.
    • Radiation: The astronaut constantly radiates heat outwards into the cold expanse of space at a rate governed by the Stefan-Boltzmann law (Prad=ϵσATbody4P_{\text{rad}} = \epsilon \sigma A T_{\text{body}}^4), which amounts to several hundred watts.

Because heat loss by radiation vastly exceeds heat gain from collisions with the rarefied gas, the astronaut experiences a rapid net loss of thermal energy and would freeze.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the translational kinetic energy per particle (3/2 k_B T) with the one-dimensional energy per degree of freedom (1/2 k_B T).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Kavg=12kBT  ⟹  Kavg=12(1.381×10−23)(1.20×103)=8.29×10−21 JK_{\text{avg}} = \frac{1}{2} k_B T \implies K_{\text{avg}} = \frac{1}{2} (1.381 \times 10^{-23})(1.20 \times 10^3) = 8.29 \times 10^{-21}\text{ J}

    Correct

    K‾=32kBT=32(1.381×10−23 J/K)(1.20×103 K)=2.49×10−20 J\overline{K} = \frac{3}{2} k_B T = \frac{3}{2} (1.381 \times 10^{-23}\text{ J/K})(1.20 \times 10^3\text{ K}) = 2.49 \times 10^{-20}\text{ J}

    You used the energy associated with only one translational degree of freedom (frac12kBT\\frac{1}{2}k_B T). In three-dimensional space, gas particles have three independent translational directions (x,y,zx, y, z), making the total translational kinetic energy overlineK=frac32kBT\\overline{K} = \\frac{3}{2}k_B T.

  2. Step 2

    N=(1.00×1015)(1.00)=1.00×1015 particles  ⟹  U=N⋅Kavg=(1.00×1015)(8.29×10−21)=8.29×10−6 JN = (1.00 \times 10^{15})(1.00) = 1.00 \times 10^{15}\text{ particles} \implies U = N \cdot K_{\text{avg}} = (1.00 \times 10^{15})(8.29 \times 10^{-21}) = 8.29 \times 10^{-6}\text{ J}

    Correct

    U=NK‾=(1.00×1015)(2.49×10−20 J)=2.49×10−5 JU = N\overline{K} = (1.00 \times 10^{15})(2.49 \times 10^{-20}\text{ J}) = 2.49 \times 10^{-5}\text{ J}

    Your formula U=NKavgU = N K_{\text{avg}} and your particle count calculation are both completely correct. The resulting numerical value differs solely because it inherited the value from part (a).

  3. Step 3

    Because the gas density is extremely low, the rate of thermal energy transfer via collisions is negligible compared to radiative heat loss.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately determined the total number of particles in the given volume.

You correctly formulated the total internal energy as the product of the particle count and average kinetic energy.

You provided an accurate physical explanation distinguishing temperature from the net rate of heat transfer.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Degrees of Freedom Misapplication

You wrote 12kBT\frac{1}{2}k_B T instead of 32kBT\frac{3}{2}k_B T when calculating translational kinetic energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled the equipartition theorem formula for a single translational degree of freedom rather than summing across all three spatial dimensions (x,y,zx, y, z) for translational motion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Degrees of Freedom for Translation
  • Every independent translational degree of freedom contributes 12kBT\frac{1}{2}k_B T of thermal energy. In 3D space, translational kinetic energy is always 32kBT\frac{3}{2}k_B T.

  • Check the dimensionality of motion: for 3D gas translation, multiply 12kBT\frac{1}{2}k_B T by 3.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the equipartition theorem for 3 translational degrees of freedom: K‾=3×(12kBT)=32kBT\overline{K} = 3 \times \left(\frac{1}{2} k_B T\right) = \frac{3}{2} k_B T.

  2. Calculate K‾=32(1.381×10−23 J/K)(1.20×103 K)=2.49×10−20 J\overline{K} = \frac{3}{2}(1.381 \times 10^{-23}\text{ J/K})(1.20 \times 10^3\text{ K}) = 2.49 \times 10^{-20}\text{ J}.

  3. Multiply by N=1.00×1015N = 1.00 \times 10^{15} particles to obtain U=2.49×10−5 JU = 2.49 \times 10^{-5}\text{ J}.

Final answer

(a) K‾=2.49×10−20 J\overline{K} = 2.49 \times 10^{-20}\text{ J}; (b) U=2.49×10−5 JU = 2.49 \times 10^{-5}\text{ J}; (c) Negligible collisional heat conduction due to low particle density cannot compensate for rapid radiative heat loss.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the equipartition theorem and write down the degree-of-freedom counts for translation (3), rotation, and vibration.

  • Practice distinguishing between energy per degree of freedom (12kBT\frac{1}{2}k_B T) and total translational kinetic energy (32kBT\frac{3}{2}k_B T).

OverviewACEpath Teacher's Diagnosis

02 The student confuses the macroscopic ideal gas constant R with Boltzmann's constant k_B when finding the microscopic kinetic energy per particle.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Kavg=(32)∗R∗T⟹Kavg=(32)∗8.314∗(1.20∗103)=1.50∗104 JK_{avg} = \left(\frac{3}{2}\right) * R * T \Longrightarrow K_{avg} = \left(\frac{3}{2}\right) * 8.314 * (1.20 * 10^3) = 1.50 * 10^4\text{ J}

    Correct

    K‾=32kBT=32(1.381×10−23 J/K)(1.20×103 K)≈2.49×10−20 J\overline{K} = \frac{3}{2} k_B T = \frac{3}{2}(1.381 \times 10^{-23}\text{ J/K})(1.20 \times 10^3\text{ K}) \approx 2.49 \times 10^{-20}\text{ J}

    You substituted the universal molar gas constant RR instead of Boltzmann's constant kBk_B. The expression 32RT\frac{3}{2}RT gives the average translational kinetic energy per mole, whereas the energy per individual particle requires Boltzmann's constant: K‾=32kBT\overline{K} = \frac{3}{2}k_B T.

  2. Step 2

    N=(1.00∗1015)∗1.00=1.00∗1015 particles⟹U=N∗Kavg=(1.00∗1015)∗(1.50∗104)=1.50∗1019 JN = (1.00 * 10^{15}) * 1.00 = 1.00 * 10^{15}\text{ particles} \Longrightarrow U = N * K_{avg} = (1.00 * 10^{15}) * (1.50 * 10^4) = 1.50 * 10^{19}\text{ J}

    Correct

    N=(NV)V=1.00×1015 molecules⟹U=NK‾=(1.00×1015)(2.4858×10−20 J)≈2.49×10−5 JN = \left(\frac{N}{V}\right) V = 1.00 \times 10^{15}\text{ molecules} \Longrightarrow U = N \overline{K} = (1.00 \times 10^{15})(2.4858 \times 10^{-20}\text{ J}) \approx 2.49 \times 10^{-5}\text{ J}

    Your reasoning to multiply the total particle count NN by the average kinetic energy per particle was completely correct, but your final value was inflated because it inherited the incorrect value of KavgK_{\text{avg}} from part (a).

  3. Step 3

    Because the gas density is extremely low, heat transfer by collisions is negligible compared to radiative heat loss.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that total internal energy for an ideal monatomic gas equals the total number of particles multiplied by the average kinetic energy per particle.

You accurately calculated the total number of particles in the given volume using the number density.

You provided a clear and physically sound explanation distinguishing temperature from the rate of heat transfer via collisions versus radiation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Molar vs. Molecular Gas Constant Confusion

You grabbed R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}) instead of kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J}/\text{K} when computing the energy of a single particle.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated macroscopic molar thermal energy with microscopic single-particle thermal energy. Multiplying by RR evaluates the thermal energy of one mole of gas (NA≈6.022×1023N_A \approx 6.022 \times 10^{23} particles), whereas single-particle calculations require Boltzmann's constant (kB=R/NAk_B = R / N_A).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Target Entity (Mole vs. Particle)
  • Use RR when dealing with moles (nn), and use kBk_B when dealing with individual particles or molecules (NN).

  • Notice whether the problem asks for energy 'per particle' or 'per mole'. If 'per particle', choose kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J}/\text{K}.

Verify Physical Scale of Energy
  • A single atom at room temperature or low thousands of kelvins has an energy on the order of 10−2110^{-21} to 10−19 J10^{-19}\text{ J}.

  • If your calculated energy for a single atom is thousands of joules (104 J10^4\text{ J}), pause and divide by Avogadro's number NAN_A.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate average kinetic energy per particle using Boltzmann's constant: K‾=32kBT=32(1.381×10−23 J/K)(1.20×103 K)=2.486×10−20 J\overline{K} = \frac{3}{2} k_B T = \frac{3}{2}(1.381 \times 10^{-23}\text{ J}/\text{K})(1.20 \times 10^3\text{ K}) = 2.486 \times 10^{-20}\text{ J}.

  2. Compute total internal energy using the corrected particle energy: U=NK‾=(1.00×1015 particles)(2.486×10−20 J/particle)=2.49×10−5 JU = N \overline{K} = (1.00 \times 10^{15}\text{ particles})(2.486 \times 10^{-20}\text{ J/particle}) = 2.49 \times 10^{-5}\text{ J}.

Final answer

(a) K‾=2.49×10−20 J\overline{K} = 2.49 \times 10^{-20}\text{ J}; (b) U=2.49×10−5 JU = 2.49 \times 10^{-5}\text{ J}; (c) Because the particle density is negligible, conductive heat transfer from gas collisions is virtually zero, so the astronaut rapidly loses heat via thermal radiation and freezes.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between Boltzmann's constant and the ideal gas constant: kB=R/NAk_B = R / N_A.

  • Practice identifying whether a question specifies quantities per particle, per mole, or for a macroscopic system volume.

OverviewACEpath Teacher's Diagnosis

03 The student attributes freezing to the gas having a low kinetic temperature instead of recognizing that low collision rate and radiative heat loss dominate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Kavg=32kBT=32(1.381×10−23)(1.20×103)=2.49×10−20 JK_{\text{avg}} = \frac{3}{2} k_B T = \frac{3}{2} (1.381 \times 10^{-23})(1.20 \times 10^3) = 2.49 \times 10^{-20}\text{ J}

  2. Step 2

    N=(1.00×1015)×1.00=1.00×1015 particles  ⟹  U=N⋅Kavg=(1.00×1015)(2.49×10−20)=2.49×10−5 JN = (1.00 \times 10^{15}) \times 1.00 = 1.00 \times 10^{15}\text{ particles} \implies U = N \cdot K_{\text{avg}} = (1.00 \times 10^{15})(2.49 \times 10^{-20}) = 2.49 \times 10^{-5}\text{ J}

  3. Step 3

    "The astronaut freezes because space is a vacuum and therefore the actual temperature of the gas surrounding the astronaut is near absolute zero."

    Correct

    The gas temperature truly is 1200 K1200\text{ K}, but because the particle density is virtually a vacuum, the rate of heat conduction from collisions is negligible (U/V=2.49×10−5 J/m3U/V = 2.49 \times 10^{-5}\text{ J/m}^3), while the astronaut radiates heat away rapidly into space (Prad=ϵσAT4P_{\text{rad}} = \epsilon \sigma A T^4).

    The kinetic temperature of the thermosphere gas really is 1200 K1200\text{ K} because temperature measures the average kinetic energy per particle. The astronaut freezes because the collision rate is far too low to transfer significant heat, while radiative heat loss to deep space dominates.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the equipartition theorem K‾=32kBT\overline{K} = \frac{3}{2}k_B T to calculate average molecular kinetic energy.

You correctly related the total internal energy of an ideal gas to the product of particle count and average kinetic energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing temperature with heat transfer rate and internal energy

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the thermodynamic definition of temperature (an intensive measure of average kinetic energy per particle) with heat sensation and heat transfer. You assumed that feeling cold implies the surrounding gas particles must have low kinetic temperature, overlooking that thermal sensation depends on the net rate of heat transfer (conduction vs. radiation) and particle density.

REASONING PATH
Your ACEpath teacher’s suggested approach
Temperature vs. Internal Energy
  • Temperature (TT) is an intensive property proportional to average kinetic energy per particle (K‾=32kBT\overline{K} = \frac{3}{2}k_B T). Internal energy (U=NK‾U = N\overline{K}) is an extensive property proportional to total energy.

  • Do not alter the stated temperature based on vacuum conditions; separate particle speed from particle quantity.

Heat Transfer Rate
  • Whether an object warms or cools depends on net heat transfer rate dQdt\frac{dQ}{dt}, where thermal conduction requires physical particle collisions and radiation emits continuously as P=ϵσAT4P = \epsilon \sigma A T^4.

  • Compare heat gained from rare particle impacts against heat lost via thermal radiation to determine if an object freezes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State clearly that the kinetic temperature of the gas is indeed 1.20×103 K1.20 \times 10^3\text{ K} because each particle possesses a high average kinetic energy ("K‾=2.49×10−20 J""\overline{K} = 2.49 \times 10^{-20}\text{ J}").

  2. Explain that because the particle density is so low (1.00×1015 molecules/m31.00 \times 10^{15}\text{ molecules/m}^3), the gas has an extremely small total internal energy density (2.49×10−5 J/m32.49 \times 10^{-5}\text{ J/m}^3), making particle collisions with the astronaut extremely rare.

  3. Conclude that the rate of heat conduction from the gas to the astronaut is practically zero, whereas the astronaut rapidly radiates heat away into the vacuum of space (Prad=ϵσATbody4P_{\text{rad}} = \epsilon \sigma A T_{\text{body}}^4), causing a net heat loss and freezing.

Final answer

(a) K‾=2.49×10−20 J\overline{K} = 2.49 \times 10^{-20}\text{ J}; (b) U=2.49×10−5 JU = 2.49 \times 10^{-5}\text{ J}; (c) The gas temperature is genuinely 1200 K1200\text{ K}, but its extreme rarefaction yields a negligible rate of conductive heat transfer to the astronaut, while the astronaut rapidly radiates heat into space, leading to freezing.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between intensive thermal properties (temperature) and extensive thermal properties (internal energy, heat).

  • Practice identifying all mechanisms of heat transfer (conduction, convection, radiation) when analyzing thermal equilibrium in low-density or vacuum environments.

Lock it in

Similar question

01

A sample of helium gas (monatomic) is at a temperature of 300 K300\text{ K}. Calculate the average translational kinetic energy per atom in joules. (kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J/K})

Answer

K‾=32kBT=1.5×(1.381×10−23 J/K)×300 K=6.21×10−21 J\overline{K} = \frac{3}{2} k_B T = 1.5 \times (1.381 \times 10^{-23}\text{ J/K}) \times 300\text{ K} = 6.21 \times 10^{-21}\text{ J}.

02

A container of volume 0.50 m30.50\text{ m}^3 contains argon gas at T=400 KT = 400\text{ K} with a number density of 2.00×1020 particles/m32.00 \times 10^{20}\text{ particles/m}^3. Calculate the total translational internal energy UU of the argon gas.

Answer

U=NK‾=(NV⋅V)(32kBT)=(1.00×1020)×(1.5×1.381×10−23×400)=8.29×10−1 JU = N\overline{K} = \left(\frac{N}{V} \cdot V\right)\left(\frac{3}{2}k_B T\right) = (1.00 \times 10^{20}) \times \left(1.5 \times 1.381 \times 10^{-23} \times 400\right) = 8.29 \times 10^{-1}\text{ J}.

03

An interstellar gas cloud consists of atomic hydrogen at T=10 KT = 10\text{ K} with a particle density of 1.0×107 atoms/m31.0 \times 10^7\text{ atoms/m}^3. Compare the thermal energy contained in a 1 km31\text{ km}^3 volume of this cloud to the kinetic energy of a single 0.10 kg0.10\text{ kg} baseball traveling at 30 m/s30\text{ m/s}. Which is greater?

Answer

The cloud volume is V=109 m3V = 10^9\text{ m}^3, so N=1016N = 10^{16} atoms. Cloud internal energy: U=N(32kBT)=1016×1.5×(1.381×10−23)×10≈2.07×10−6 JU = N\left(\frac{3}{2}k_B T\right) = 10^{16} \times 1.5 \times (1.381 \times 10^{-23}) \times 10 \approx 2.07 \times 10^{-6}\text{ J}. Baseball kinetic energy: K=12(0.10)(30)2=45 JK = \frac{1}{2}(0.10)(30)^2 = 45\text{ J}. The baseball has vastly more energy (approx2.2×107\\approx 2.2 \times 10^7 times greater).

Loading workspace…