Resources

A seismograph station detects a sinusoidal Rayleigh surface wave with a measured wavelength of λ=4.25 km\lambda = 4.25\text{ km}. A sensor on the ground records that a single soil particle completes 12.012.0 full vertical oscillations in 15.0 s15.0\text{ s}. Back-calculate the phase propagation velocity vv of this seismic surface wave across the continental crust in kilometers per second (km/s\text{km/s}).

Answer and steps

Final answer

v=3.40 km/sv = 3.40\text{ km/s}

Steps

Step 1: Determine the frequency of the wave

The frequency ff is the number of complete oscillation cycles completed per unit of time:

f=NΔtf = \frac{N}{\Delta t}

Given that a soil particle undergoes N=12.0 oscillationsN = 12.0\text{ oscillations} in Δt=15.0 s\Delta t = 15.0\text{ s}:

f=12.015.0 s=0.800 Hzf = \frac{12.0}{15.0\text{ s}} = 0.800\text{ Hz}

(Alternatively, the period of one oscillation is T=ΔtN=15.0 s12.0=1.25 sT = \frac{\Delta t}{N} = \frac{15.0\text{ s}}{12.0} = 1.25\text{ s}.)


Step 2: Calculate the phase propagation velocity

The fundamental relationship between phase speed vv, frequency ff, and wavelength λ\lambda for any harmonic wave is:

v=f⋅λv = f \cdot \lambda

Substitute the known values into the equation:

v=(0.800 s−1)(4.25 km)v = (0.800\text{ s}^{-1})(4.25\text{ km})

v=3.40 km/sv = 3.40\text{ km/s}


Common Pitfall to Avoid

  • Do not invert the calculation for frequency: the number of cycles must be divided by total time (f=NΔtf = \frac{N}{\Delta t}), whereas the period is total time divided by the number of cycles (T=ΔtNT = \frac{\Delta t}{N}). Using v=λTv = \frac{\lambda}{T} gives the exact same result: v=4.25 km1.25 s=3.40 km/sv = \frac{4.25\text{ km}}{1.25\text{ s}} = 3.40\text{ km/s}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the definition of frequency by dividing elapsed time by the number of oscillations, computing the wave period T instead of frequency f before multiplying by wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    f=15.012.0=1.25 Hzf = \frac{15.0}{12.0} = 1.25\text{ Hz}

    Correct

    f=NΔt=12.015.0 s=0.800 Hzf = \frac{N}{\Delta t} = \frac{12.0}{15.0\text{ s}} = 0.800\text{ Hz}

    You inverted the ratio when calculating frequency. Frequency is the number of cycles per unit time (f=NΔtf = \frac{N}{\Delta t}), whereas dividing elapsed time by oscillations gives the period (T=ΔtN=1.25 sT = \frac{\Delta t}{N} = 1.25\text{ s}).

  2. Step 2

    v=f∗λ  ⟹  v=1.25∗4.25=5.3125 km/sv = f * \lambda \implies v = 1.25 * 4.25 = 5.3125\text{ km/s}

    Correct

    v=fλ=(0.800 s−1)(4.25 km)=3.40 km/sv = f \lambda = (0.800\text{ s}^{-1})(4.25\text{ km}) = 3.40\text{ km/s}

    You correctly applied the formula v=fλv = f \lambda, but substituting the inverted frequency value from Step 1 led to an incorrect propagation speed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the wave speed relationship v=fλv = f \lambda.

You correctly multiplied your computed value by the given wavelength.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted frequency and period ratio

You divided total elapsed time by cycle count rather than cycle count by total time when calculating frequency.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the definition of wave frequency (f=NΔtf = \frac{N}{\Delta t}, measured in cycles per second or Hz\text{Hz}) with the wave period (T=ΔtNT = \frac{\Delta t}{N}, measured in seconds per cycle).

REASONING PATH
Your ACEpath teacher’s suggested approach
Frequency vs. Period Unit Check
  • Frequency is f=cyclestimef = \frac{\text{cycles}}{\text{time}} (unit: s−1\text{s}^{-1} or Hz\text{Hz}), while period is T=timecyclesT = \frac{\text{time}}{\text{cycles}} (unit: s\text{s}).

  • Check the units of your fraction: dividing seconds by cycles gives seconds (period TT), while dividing cycles by seconds gives hertz (frequency ff).

Wave Speed via Period
  • If you calculate period TT first, wave speed is v=λTv = \frac{\lambda}{T}.

  • When you have T=1.25 sT = 1.25\text{ s}, divide wavelength by period: v=4.25 km1.25 s=3.40 km/sv = \frac{4.25\text{ km}}{1.25\text{ s}} = 3.40\text{ km/s}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate frequency using cycles per second: f=12.0 cycles15.0 s=0.800 Hzf = \frac{12.0\text{ cycles}}{15.0\text{ s}} = 0.800\text{ Hz}.

  2. Substitute f=0.800 s−1f = 0.800\text{ s}^{-1} and λ=4.25 km\lambda = 4.25\text{ km} into v=fλv = f \lambda.

  3. Compute the propagation velocity: v=0.800×4.25=3.40 km/sv = 0.800 \times 4.25 = 3.40\text{ km/s}.

Final answer

v=3.40 km/sv = 3.40\text{ km/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that you divide cycles by time when solving for frequency ff.

  • Perform a dimensional sanity check to confirm that your frequency has units of s−1\text{s}^{-1} before multiplying by wavelength.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the wave phase speed relation v = λ / T with v = λ * T, directly multiplying wavelength by the oscillation period.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T=15.0/12.0=1.25 sT = 15.0 / 12.0 = 1.25\text{ s}

  2. Step 2

    v=λ∗Tv = \lambda * T

    Correct

    v=λTv = \frac{\lambda}{T}

    Wave speed equals distance per unit time, so wave speed is wavelength divided by period (v=λTv = \frac{\lambda}{T}), not wavelength multiplied by period.

  3. Step 3

    v=4.25∗1.25=5.3125 km/sv = 4.25 * 1.25 = 5.3125\text{ km/s}

    Correct

    v=4.25 km1.25 s=3.40 km/sv = \frac{4.25\text{ km}}{1.25\text{ s}} = 3.40\text{ km/s}

    Because the formula in the previous step had the period multiplied rather than in the denominator, this substitution and the resulting numerical answer are incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the relationship between total elapsed time and oscillation cycles to find the period.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion between period and frequency

You wrote v=λ⋅Tv = \lambda \cdot T instead of v=λTv = \frac{\lambda}{T}, swapping the position of the period with frequency.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing wave speed expressed in terms of frequency (v=λfv = \lambda f) with wave speed in terms of period (v=λTv = \frac{\lambda}{T}), likely caused by overlooking the dimensional unit of period (seconds) versus velocity (distance over time).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional consistency check
  • Velocity has dimensions of lengthtime\frac{\text{length}}{\text{time}}.

  • Always verify that your formula's units balance: λ⋅T\lambda \cdot T has units of km⋅s\text{km}\cdot\text{s}, while λT\frac{\lambda}{T} gives the desired velocity unit of km/s\text{km/s}.

Period vs. Frequency relation
  • f=1Tf = \frac{1}{T}, so v=fλ=λTv = f\lambda = \frac{\lambda}{T}.

  • If you calculate period TT first, divide wavelength by TT to find wave speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the wave speed formula relating wavelength and period: v=λTv = \frac{\lambda}{T}.

  2. Substitute λ=4.25 km\lambda = 4.25\text{ km} and T=1.25 sT = 1.25\text{ s}: v=4.25 km1.25 sv = \frac{4.25\text{ km}}{1.25\text{ s}}.

  3. Evaluate the division: v=3.40 km/sv = 3.40\text{ km/s}.

Final answer

v=3.40 km/sv = 3.40\text{ km/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the connection between wavelength, period, and frequency: v=λf=λTv = \lambda f = \frac{\lambda}{T}.

  • Check units whenever you write a physical formula to ensure that speed has units of distance divided by time.

OverviewACEpath Teacher's Diagnosis

03 The student confuses frequency with angular frequency, mistakenly multiplying the linear frequency by 2π when calculating the wave speed via v = ω * λ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    f=12.015.0=0.800 Hzf = \frac{12.0}{15.0} = 0.800\text{ Hz}

  2. Step 2

    ω=2∗π∗0.800=5.027 rad/s\omega = 2 * \pi * 0.800 = 5.027\text{ rad/s}

  3. Step 3

    v=ω∗λ=5.027∗4.25=21.36 km/sv = \omega * \lambda = 5.027 * 4.25 = 21.36\text{ km/s}

    Correct

    v=f⋅λ=(0.800 s−1)(4.25 km)=3.40 km/sv = f \cdot \lambda = (0.800\text{ s}^{-1})(4.25\text{ km}) = 3.40\text{ km/s}

    You multiplied angular frequency ω\omega by wavelength λ\lambda. The standard relationship for wave phase velocity is v=fλv = f\lambda, or alternatively v=ωkv = \frac{\omega}{k} where k=2πλk = \frac{2\pi}{\lambda}. Multiplying ω⋅λ\omega \cdot \lambda overestimates the wave speed by a factor of 2π2\pi.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the wave frequency as f=0.800 Hzf = 0.800\text{ Hz} from the number of cycles and total time.

You accurately converted linear frequency into angular frequency using ω=2πf\omega = 2\pi f.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing linear and angular wave quantities

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted angular frequency ω\omega into the wave speed formula in place of linear frequency ff, using v=ωλv = \omega\lambda instead of v=fλv = f\lambda (or v=ωkv = \frac{\omega}{k}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Linear vs. Angular Wave Speed Formulas
  • A wave's phase velocity relates linear quantities via v=fλv = f\lambda and angular quantities via v=ωkv = \frac{\omega}{k}.

  • Whenever using wavelength λ\lambda directly, multiply by linear frequency ff (in Hz\text{Hz} or s−1\text{s}^{-1}), not angular frequency ω\omega.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the fundamental wave speed equation: v=fλv = f \lambda.

  2. Substitute the linear frequency f=0.800 s−1f = 0.800\text{ s}^{-1} and wavelength λ=4.25 km\lambda = 4.25\text{ km}: v=(0.800 s−1)(4.25 km)v = (0.800\text{ s}^{-1})(4.25\text{ km}).

  3. Compute the product: v=3.40 km/sv = 3.40\text{ km/s}.

Final answer

v=3.40 km/sv = 3.40\text{ km/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the dimensional units of linear frequency (cycles/s\text{cycles/s} or Hz\text{Hz}) versus angular frequency (rad/s\text{rad/s}).

  • Practice pairing conjugate wave variables: (f,λ)(f, \lambda) for linear equations and (ω,k)(\omega, k) for angular equations.

Lock it in

Similar question

01

An ocean buoy bobs up and down 1818 times in 45 s45\text{ s}. The passing surface water waves have a crest-to-crest distance of 15 m15\text{ m}. Calculate the wave speed.

Answer

v=6.0 m/sv = 6.0\text{ m/s}. First, find frequency: f=1845 s=0.40 Hzf = \frac{18}{45\text{ s}} = 0.40\text{ Hz}. Then, v=fλ=(0.40 s−1)(15 m)=6.0 m/sv = f \lambda = (0.40\text{ s}^{-1})(15\text{ m}) = 6.0\text{ m/s}.

02

A seismic shear wave (SS-wave) propagates through rock at v=4.50 km/sv = 4.50\text{ km/s}. A seismograph station detects 1616 full oscillation cycles over a span of 20.0 s20.0\text{ s}. Determine the wavelength λ\lambda of this SS-wave.

Answer

λ=5.63 km\lambda = 5.63\text{ km}. Frequency is f=16 cycles20.0 s=0.800 Hzf = \frac{16\text{ cycles}}{20.0\text{ s}} = 0.800\text{ Hz}. Rearranging v=fλv = f\lambda gives λ=vf=4.50 km/s0.800 s−1=5.625 km≈5.63 km\lambda = \frac{v}{f} = \frac{4.50\text{ km/s}}{0.800\text{ s}^{-1}} = 5.625\text{ km} \approx 5.63\text{ km}.

03

An ultrasound transducer emits sound pulses into soft tissue where sound travels at 1540 m/s1540\text{ m/s}. The transducer element vibrates 1.50×1071.50 \times 10^7 times during a 3.00 s3.00\text{ s} diagnostic run. What is the spatial wavelength of the acoustic wave inside the tissue?

Answer

λ=3.08×10−4 m\lambda = 3.08 \times 10^{-4}\text{ m} (or 0.308 mm0.308\text{ mm}). Frequency is f=1.50×107 cycles3.00 s=5.00×106 Hz=5.00 MHzf = \frac{1.50 \times 10^7\text{ cycles}}{3.00\text{ s}} = 5.00 \times 10^6\text{ Hz} = 5.00\text{ MHz}. Then λ=vf=1540 m/s5.00×106 s−1=3.08×10−4 m\lambda = \frac{v}{f} = \frac{1540\text{ m/s}}{5.00 \times 10^6\text{ s}^{-1}} = 3.08 \times 10^{-4}\text{ m}.

Loading workspace…