Resources

A solid cylindrical wooden spar buoy has a uniform cross-sectional area A=0.0450 m2A = 0.0450\text{ m}^2 and total length L=2.40 mL = 2.40\text{ m}. The buoy floats vertically in seawater of density ρsea=1.025×103 kg/m3\rho_{\text{sea}} = 1.025 \times 10^3\text{ kg/m}^3. If the submerged length of the vertical cylinder is measured to be hsub=1.75 mh_{\text{sub}} = 1.75\text{ m}, determine the fraction of the total volume submerged, VsubVtot\frac{V_{\text{sub}}}{V_{\text{tot}}}, and calculate the average density of the wood ρwood\rho_{\text{wood}}.

Answer and steps

Final answer

VsubVtot=0.729\frac{V_{\text{sub}}}{V_{\text{tot}}} = 0.729; ρwood=7.47×102 kg/m3\rho_{\text{wood}} = 7.47 \times 10^2\text{ kg/m}^3

Steps

01

Find the fraction of the total volume submerged

For a cylinder with a uniform cross-sectional area AA:

  • Total volume: Vtot=A⋅LV_{\text{tot}} = A \cdot L
  • Submerged volume: Vsub=A⋅hsubV_{\text{sub}} = A \cdot h_{\text{sub}}

Taking the ratio of the submerged volume to the total volume: VsubVtot=A⋅hsubA⋅L=hsubL\frac{V_{\text{sub}}}{V_{\text{tot}}} = \frac{A \cdot h_{\text{sub}}}{A \cdot L} = \frac{h_{\text{sub}}}{L}

Substitute the given lengths into the ratio: VsubVtot=1.75 m2.40 m≈0.72917\frac{V_{\text{sub}}}{V_{\text{tot}}} = \frac{1.75\text{ m}}{2.40\text{ m}} \approx 0.72917

Rounding to three significant figures: VsubVtot=0.729\frac{V_{\text{sub}}}{V_{\text{tot}}} = 0.729


02

Apply the condition for floating equilibrium

According to Archimedes' principle, the upward buoyant force FBF_B equals the weight of the displaced seawater: FB=ρsea⋅Vsub⋅gF_B = \rho_{\text{sea}} \cdot V_{\text{sub}} \cdot g

The downward gravitational force (weight) WW of the buoy is: W=mbuoy⋅g=ρwood⋅Vtot⋅gW = m_{\text{buoy}} \cdot g = \rho_{\text{wood}} \cdot V_{\text{tot}} \cdot g

Because the spar buoy floats in vertical static equilibrium, the net vertical force is zero: FB=WF_B = W

ρsea⋅Vsub⋅g=ρwood⋅Vtot⋅g\rho_{\text{sea}} \cdot V_{\text{sub}} \cdot g = \rho_{\text{wood}} \cdot V_{\text{tot}} \cdot g


03

Calculate the density of the wood

Cancel the acceleration due to gravity gg and solve for ρwood\rho_{\text{wood}}: ρwood=ρsea(VsubVtot)\rho_{\text{wood}} = \rho_{\text{sea}} \left(\frac{V_{\text{sub}}}{V_{\text{tot}}}\right)

Substitute the known values: ρwood=(1.025×103 kg/m3)⋅(1.75 m2.40 m)\rho_{\text{wood}} = (1.025 \times 10^3\text{ kg/m}^3) \cdot \left(\frac{1.75\text{ m}}{2.40\text{ m}}\right)

ρwood≈7.474×102 kg/m3\rho_{\text{wood}} \approx 7.474 \times 10^2\text{ kg/m}^3

Rounding to three significant figures gives: ρwood=7.47×102 kg/m3\rho_{\text{wood}} = 7.47 \times 10^2\text{ kg/m}^3

Common Pitfall: Forgetting that cross-sectional area AA cancels out in uniform geometry often leads to unnecessary computation. More importantly, ensure the buoyant force uses the submerged volume and fluid density (ρseaVsub\rho_{\text{sea}} V_{\text{sub}}), while the buoy's weight uses the total volume and object density (ρwoodVtot\rho_{\text{wood}} V_{\text{tot}}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the ratio between fluid density and object density, incorrectly multiplying the seawater density by the inverse fraction of submerged volume.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    VsubVtot=hsubL  ⟹  VsubVtot=1.752.40=0.729\frac{V_{\text{sub}}}{V_{\text{tot}}} = \frac{h_{\text{sub}}}{L} \implies \frac{V_{\text{sub}}}{V_{\text{tot}}} = \frac{1.75}{2.40} = 0.729

  2. Step 2

    ρ\rho{wood\text{wood}} = ρ\rho{sea\text{sea}} ⋅\cdot (VtotVsub)\left(\frac{V_{\text{tot}}}{V_{\text{sub}}}\right)   ⟹  \implies ρ\rho{wood\text{wood}} = 1025 ⋅\cdot (2.401.75)\left(\frac{2.40}{1.75}\right) = 1406 kg/m\text{ kg/m}^3

    Correct

    ρ\rho{wood\text{wood}} = ρ\rho{sea\text{sea}} ⋅\cdot (VsubVtot)\left(\frac{V_{\text{sub}}}{V_{\text{tot}}}\right) = 1025 kg/m\text{ kg/m}^3 ⋅\cdot (1.75 m2.40 m)\left(\frac{1.75\text{ m}}{2.40\text{ m}}\right) ≈\approx 7.47 ×\times 10^2 kg/m\text{ kg/m}^3

    You inverted the volume ratio in the equilibrium formula. Setting buoyant force equal to gravity gives ρseaVsubg=ρwoodVtotg\rho_{\text{sea}} V_{\text{sub}} g = \rho_{\text{wood}} V_{\text{tot}} g, which yields ρwood=ρsea(VsubVtot)\rho_{\text{wood}} = \rho_{\text{sea}} \left(\frac{V_{\text{sub}}}{V_{\text{tot}}}\right).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed the submerged volume fraction as the ratio of submerged height to total height.

You accurately calculated the numerical submerged fraction as 0.7290.729.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted algebraic ratio in equilibrium condition

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the ratio of submerged volume to total volume when equating buoyant force and gravitational force, leading to a calculated object density that is greater than the fluid density even though the object floats.

REASONING PATH
Your ACEpath teacher’s suggested approach
Equate Buoyant Force and Weight
  • For a floating object in static equilibrium, FB=WF_B = W, so ρfluidVsubg=ρobjectVtotg\rho_{\text{fluid}} V_{\text{sub}} g = \rho_{\text{object}} V_{\text{tot}} g.

  • Write out the force balance explicitly before solving for the unknown density to avoid inverting fractions.

Sanity Check Density for Floating Objects
  • Any object that floats must have an average density lower than the surrounding fluid: ρobject<ρfluid\rho_{\text{object}} < \rho_{\text{fluid}}.

  • Check your calculated density against the fluid density: since 1406 kg/m3>1025 kg/m31406\text{ kg/m}^3 > 1025\text{ kg/m}^3, the wood would sink, signaling that the ratio was inverted.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the vertical force balance: FB=W  ⟹  ρseaVsubg=ρwoodVtotgF_B = W \implies \rho_{\text{sea}} V_{\text{sub}} g = \rho_{\text{wood}} V_{\text{tot}} g.

  2. Divide both sides by g⋅Vtotg \cdot V_{\text{tot}} to isolate the wood density: ρwood=ρsea(VsubVtot)\rho_{\text{wood}} = \rho_{\text{sea}} \left(\frac{V_{\text{sub}}}{V_{\text{tot}}}\right).

  3. Substitute the values: ρwood=1025 kg/m3⋅0.72917≈7.47×102 kg/m3\rho_{\text{wood}} = 1025\text{ kg/m}^3 \cdot 0.72917 \approx 7.47 \times 10^2\text{ kg/m}^3.

Final answer

VsubVtot=0.729\frac{V_{\text{sub}}}{V_{\text{tot}}} = 0.729; ρwood=7.47×102 kg/m3\rho_{\text{wood}} = 7.47 \times 10^2\text{ kg/m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write the full equilibrium equation ρfluidVsub=ρobjVtot\rho_{\text{fluid}} V_{\text{sub}} = \rho_{\text{obj}} V_{\text{tot}} before rearranging.

  • Perform a physical reasonability check: verify that a floating object's density is strictly less than the fluid's density.

OverviewACEpath Teacher's Diagnosis

02 The student uses the exposed length above the water line instead of the submerged length to determine the submerged fraction and resulting density.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    habove=2.40−1.75=0.65 m  ⟹  VsubVtot=0.652.40=0.271h_{\text{above}} = 2.40 - 1.75 = 0.65\text{ m} \implies \frac{V_{\text{sub}}}{V_{\text{tot}}} = \frac{0.65}{2.40} = 0.271

    Correct

    VsubVtot=hsubL=1.75 m2.40 m≈0.729\frac{V_{\text{sub}}}{V_{\text{tot}}} = \frac{h_{\text{sub}}}{L} = \frac{1.75\text{ m}}{2.40\text{ m}} \approx 0.729

    The problem directly provides the submerged length as hsub=1.75 mh_{\text{sub}} = 1.75\text{ m}. You subtracted this from the total length to find the exposed height (0.65 m0.65\text{ m}) and used that in the numerator instead of the submerged length.

  2. Step 2

    ρwood=ρsea⋅(VsubVtot)\rho_{\text{wood}} = \rho_{\text{sea}} \cdot \left(\frac{V_{\text{sub}}}{V_{\text{tot}}}\right)

  3. Step 3

    ρwood=1025⋅0.271=278 kg/m3\rho_{\text{wood}} = 1025 \cdot 0.271 = 278\text{ kg/m}^3

    Correct

    ρwood=(1.025×103 kg/m3)⋅0.72917≈7.47×102 kg/m3\rho_{\text{wood}} = (1.025 \times 10^3\text{ kg/m}^3) \cdot 0.72917 \approx 7.47 \times 10^2\text{ kg/m}^3

    Your arithmetic was carried out correctly according to your formula, but the result was shifted because it inherited the incorrect volume fraction from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that a uniform cross-sectional cylinder allows the volume fraction to simplify to a ratio of lengths.

You derived the correct equilibrium relationship connecting the density ratio to the submerged volume fraction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Submerged vs. Exposed Height Confusion

You solved for the height above water (0.65 m0.65\text{ m}) instead of using the submerged depth (1.75 m1.75\text{ m}) directly in the submerged ratio.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You may have assumed the problem gave the exposed portion or misidentified the variable needed in Archimedes' principle, which strictly depends on the displaced volume under the waterline.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Submerged vs. Emerged Parts
  • Buoyant force depends on the fluid displaced, so use the volume under the waterline: Vsub=A⋅hsubV_{\text{sub}} = A \cdot h_{\text{sub}}.

  • Always check whether the problem states the submerged depth or the exposed height before subtracting from total length.

Floating Density Reality Check
  • For a floating object, ρobjectρfluid=VsubVtot\frac{\rho_{\text{object}}}{\rho_{\text{fluid}}} = \frac{V_{\text{sub}}}{V_{\text{tot}}}.

  • If most of the cylinder is underwater (1.75 m1.75\text{ m} out of 2.40 m2.40\text{ m}, more than 70%70\%), its density must be more than 70%70\% of the fluid's density.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the given submerged height directly: VsubVtot=hsubL=1.75 m2.40 m≈0.72917\frac{V_{\text{sub}}}{V_{\text{tot}}} = \frac{h_{\text{sub}}}{L} = \frac{1.75\text{ m}}{2.40\text{ m}} \approx 0.72917.

  2. Substitute this ratio into your density equilibrium formula: ρwood=ρsea(VsubVtot)=(1025 kg/m3)(0.72917)≈747 kg/m3\rho_{\text{wood}} = \rho_{\text{sea}} \left(\frac{V_{\text{sub}}}{V_{\text{tot}}}\right) = (1025\text{ kg/m}^3)(0.72917) \approx 747\text{ kg/m}^3.

Final answer

VsubVtot=0.729\frac{V_{\text{sub}}}{V_{\text{tot}}} = 0.729, ρwood=7.47×102 kg/m3\rho_{\text{wood}} = 7.47 \times 10^2\text{ kg/m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Annotate a simple cross-section sketch with hsubh_{\text{sub}} below the surface line and haboveh_{\text{above}} above it to verify which length enters Archimedes' principle.

  • Perform a physical sanity check comparing the submerged fraction to your computed density.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly assumes standard freshwater density of 1000 kg/m³ instead of using the given seawater density of 1.025 × 10³ kg/m³.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    VsubVtot=hsubL=1.752.40=0.729\frac{V_{\text{sub}}}{V_{\text{tot}}} = \frac{h_{\text{sub}}}{L} = \frac{1.75}{2.40} = 0.729

  2. Step 2

    ρwood=ρwater⋅(VsubVtot)  ⟹  ρwood=1000⋅0.729=729 kg/m3\rho_{\text{wood}} = \rho_{\text{water}} \cdot \left(\frac{V_{\text{sub}}}{V_{\text{tot}}}\right) \implies \rho_{\text{wood}} = 1000 \cdot 0.729 = 729\text{ kg/m}^3

    Correct

    ρwood=ρsea⋅(VsubVtot)=(1.025×103 kg/m3)(0.72917)≈7.47×102 kg/m3\rho_{\text{wood}} = \rho_{\text{sea}} \cdot \left(\frac{V_{\text{sub}}}{V_{\text{tot}}}\right) = (1.025 \times 10^3\text{ kg/m}^3)(0.72917) \approx 7.47 \times 10^2\text{ kg/m}^3

    You established the correct equilibrium formula connecting the densities, but you substituted 1000 kg/m31000\text{ kg/m}^3 (standard freshwater) instead of the problem's specified seawater density of 1.025×103 kg/m31.025 \times 10^3\text{ kg/m}^3 (1025 kg/m31025\text{ kg/m}^3).

WHAT YOU DID WELL
Compliments from Your Teacher

You simplified the volume ratio VsubVtot\frac{V_{\text{sub}}}{V_{\text{tot}}} directly to the height ratio hsubL\frac{h_{\text{sub}}}{L}.

You correctly derived the static equilibrium relationship ρobject=ρfluid(VsubVtot)\rho_{\text{object}} = \rho_{\text{fluid}} \left(\frac{V_{\text{sub}}}{V_{\text{tot}}}\right).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Defaulting to Standard Constant Instead of Given Value

You recalled and used the default density of pure freshwater (1000 kg/m31000\text{ kg/m}^3) out of habit rather than reading the specified seawater density from the problem statement.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Automatic retrieval of memorized physical constants (freshwater density ρ=1000 kg/m3\rho = 1000\text{ kg/m}^3) overriding explicitly provided environmental parameters (seawater density ρsea=1.025×103 kg/m3\rho_{\text{sea}} = 1.025 \times 10^3\text{ kg/m}^3).

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Given Fluid Densities
  • Never assume water has ρ=1000 kg/m3\rho = 1000\text{ kg/m}^3 when the problem takes place in seawater, saltwater, or another specific solution.

  • Check the problem prompt for explicit values of fluid density (e.g., ρsea=1025 kg/m3\rho_{\text{sea}} = 1025\text{ kg/m}^3) before writing down numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the given seawater density ρsea=1.025×103 kg/m3\rho_{\text{sea}} = 1.025 \times 10^3\text{ kg/m}^3 and the precise volume fraction 1.752.40\frac{1.75}{2.40}.

  2. ρwood=(1025 kg/m3)⋅(1.752.40)≈747.396 kg/m3\rho_{\text{wood}} = (1025\text{ kg/m}^3) \cdot \left(\frac{1.75}{2.40}\right) \approx 747.396\text{ kg/m}^3

  3. Round to three significant figures to obtain 7.47×102 kg/m37.47 \times 10^2\text{ kg/m}^3 (or 747 kg/m3747\text{ kg/m}^3).

Final answer

VsubVtot=0.729\frac{V_{\text{sub}}}{V_{\text{tot}}} = 0.729; ρwood=7.47×102 kg/m3\rho_{\text{wood}} = 7.47 \times 10^2\text{ kg/m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Annotate and highlight all given physical constants in the prompt before starting calculations.

  • Keep intermediate fractions (such as 1.752.40\frac{1.75}{2.40}) in your calculator until the final step to minimize rounding drift.

Lock it in

Similar question

01

A rectangular block of plastic floats in fresh water (ρ=1.00×103 kg/m3\rho = 1.00 \times 10^3\text{ kg/m}^3) with 60%60\% of its total volume submerged below the waterline. What is the average density of the plastic?

Answer

ρplastic=6.00×102 kg/m3\rho_{\text{plastic}} = 6.00 \times 10^2\text{ kg/m}^3. From static equilibrium, FB=W  ⟹  ρwaterVsubg=ρplasticVtotgF_B = W \implies \rho_{\text{water}} V_{\text{sub}} g = \rho_{\text{plastic}} V_{\text{tot}} g, so ρplastic=ρwater(VsubVtot)=(1.00×103)(0.60)=600 kg/m3\rho_{\text{plastic}} = \rho_{\text{water}} \left(\frac{V_{\text{sub}}}{V_{\text{tot}}}\right) = (1.00 \times 10^3)(0.60) = 600\text{ kg/m}^3.

02

A cylindrical wooden rod of total length 1.50 m1.50\text{ m} and cross-sectional area 0.020 m20.020\text{ m}^2 floats vertically in an oil bath of density ρoil=850 kg/m3\rho_{\text{oil}} = 850\text{ kg/m}^3. If the density of the wood is 680 kg/m3680\text{ kg/m}^3, what is the submerged depth hsubh_{\text{sub}} of the rod?

Answer

hsub=1.20 mh_{\text{sub}} = 1.20\text{ m}. Equating forces gives ρoilAhsubg=ρwoodALg  ⟹  hsub=L(ρwoodρoil)=1.50 m×(680850)=1.20 m\rho_{\text{oil}} A h_{\text{sub}} g = \rho_{\text{wood}} A L g \implies h_{\text{sub}} = L \left(\frac{\rho_{\text{wood}}}{\rho_{\text{oil}}}\right) = 1.50\text{ m} \times \left(\frac{680}{850}\right) = 1.20\text{ m}.

03

A spherical hollow buoy of mass 45.0 kg45.0\text{ kg} and total outer volume 0.120 m30.120\text{ m}^3 floats in seawater of density 1025 kg/m31025\text{ kg/m}^3. A solid lead ballast (density 1.13×104 kg/m31.13 \times 10^4\text{ kg/m}^3) is attached to the bottom of the buoy so that the buoy is fully submerged under water while remaining neutrally buoyant. Calculate the required mass of the lead ballast.

Answer

mlead≈85.5 kgm_{\text{lead}} \approx 85.5\text{ kg}. For neutral buoyancy of the combined system: (mbuoy+mlead)g=ρsea(Vbuoy+Vlead)g(m_{\text{buoy}} + m_{\text{lead}}) g = \rho_{\text{sea}} (V_{\text{buoy}} + V_{\text{lead}}) g. Substitute Vlead=mleadρleadV_{\text{lead}} = \frac{m_{\text{lead}}}{\rho_{\text{lead}}}: mbuoy+mlead=ρseaVbuoy+ρseamleadρleadm_{\text{buoy}} + m_{\text{lead}} = \rho_{\text{sea}} V_{\text{buoy}} + \rho_{\text{sea}} \frac{m_{\text{lead}}}{\rho_{\text{lead}}}. Rearranging yields mlead(1−ρseaρlead)=ρseaVbuoy−mbuoym_{\text{lead}} \left(1 - \frac{\rho_{\text{sea}}}{\rho_{\text{lead}}}\right) = \rho_{\text{sea}} V_{\text{buoy}} - m_{\text{buoy}}. Substituting the numbers: mlead(1−102511300)=(1025)(0.120)−45.0=123.0−45.0=78.0 kgm_{\text{lead}} \left(1 - \frac{1025}{11300}\right) = (1025)(0.120) - 45.0 = 123.0 - 45.0 = 78.0\text{ kg}. Thus, mlead=78.01−0.09071≈85.8 kgm_{\text{lead}} = \frac{78.0}{1 - 0.09071} \approx 85.8\text{ kg}.

Loading workspace…