Resources

Two wheels, Wheel A and Wheel B, have identical total mass M=3.00 kgM = 3.00\text{ kg} and identical outer radius R=0.400 mR = 0.400\text{ m}. Wheel A is a thin cylindrical hoop with all mass concentrated at the rim (IA=MR2I_A = MR^2). Wheel B is a uniform solid disk with mass distributed continuously throughout its area (IB=12MR2I_B = \frac{1}{2}MR^2). (a) Calculate the numerical values of IAI_A and IBI_B. (b) If both wheels are released from rest simultaneously from the same height on the same incline, students frequently assume the heavier-rimmed wheel accelerates faster because it has 'more rotational momentum.' Which wheel actually reaches the bottom first, and why does mass distribution govern rotational inertia rather than total mass alone?

Answer and steps

Final answer

(a) IA=0.480 kg⋅m2I_A = 0.480\text{ kg}\cdot\text{m}^2, IB=0.240 kg⋅m2I_B = 0.240\text{ kg}\cdot\text{m}^2; (b) Wheel B reaches the bottom first because its smaller moment of inertia requires less gravitational potential energy to be converted into rotational kinetic energy, leaving more energy for linear translation (aB=23gsin⁡θ>aA=12gsin⁡θa_B = \frac{2}{3}g\sin\theta > a_A = \frac{1}{2}g\sin\theta).

Steps

01

Why Mass Distribution Matters

Part (a): Calculating Moments of Inertia

The moment of inertia measures an object's resistance to changes in its rotational motion about a specified axis.

  1. Wheel A (Thin Cylindrical Hoop): All mass is concentrated at the outer radius RR: IA=MR2=(3.00 kg)(0.400 m)2=3.00 kg⋅0.160 m2=0.480 kg⋅m2I_A = MR^2 = (3.00\text{ kg})(0.400\text{ m})^2 = 3.00\text{ kg} \cdot 0.160\text{ m}^2 = 0.480\text{ kg}\cdot\text{m}^2
  2. Wheel B (Uniform Solid Disk): The mass is distributed continuously across the entire cross-section from the center to the outer edge: IB=12MR2=12(3.00 kg)(0.400 m)2=0.240 kg⋅m2I_B = \frac{1}{2}MR^2 = \frac{1}{2}(3.00\text{ kg})(0.400\text{ m})^2 = 0.240\text{ kg}\cdot\text{m}^2

Part (b): Race Down the Incline and Mass Distribution

The definition of moment of inertia for discrete particles is I=∑miri2I = \sum m_i r_i^2, and for continuous bodies, I=∫r2 dmI = \int r^2 \, dm.

  • The distance rr from the axis of rotation is squared. Consequently, mass located farther from the center contributes significantly more to rotational inertia than mass near the center.
  • Even though both wheels have the exact same total mass (M=3.00 kgM = 3.00\text{ kg}), Wheel A has all of its mass at the maximum possible distance (r=Rr = R), giving it twice the rotational inertia of Wheel B (IA=2IBI_A = 2I_B), where much of the mass lies closer to the axle.
02

Determining Which Wheel Wins (Energy Approach)

When rolling down an incline of vertical drop hh without slipping, total mechanical energy is conserved: Etotal=mgh=Ktrans+Krot=12Mv2+12Iω2E_{\text{total}} = mgh = K_{\text{trans}} + K_{\text{rot}} = \frac{1}{2}Mv^2 + \frac{1}{2}I\omega^2

Since the wheels roll without slipping, the linear velocity vv and angular velocity ω\omega are related by ω=vR\omega = \frac{v}{R}. Substituting this gives: mgh=12Mv2+12I(vR)2=12Mv2(1+IMR2)mgh = \frac{1}{2}Mv^2 + \frac{1}{2}I\left(\frac{v}{R}\right)^2 = \frac{1}{2}Mv^2\left(1 + \frac{I}{MR^2}\right)

Solving for the translational velocity vv at the bottom: v=2gh1+IMR2v = \sqrt{\frac{2gh}{1 + \frac{I}{MR^2}}}

  • For Wheel A (hoop, IAMR2=1\frac{I_A}{MR^2} = 1): vA=2gh1+1=ghv_A = \sqrt{\frac{2gh}{1 + 1}} = \sqrt{gh} Its linear acceleration is aA=12gsin⁡θa_A = \frac{1}{2}g\sin\theta.
  • For Wheel B (disk, IBMR2=12\frac{I_B}{MR^2} = \frac{1}{2}): vB=2gh1+0.5=43gh≈1.15ghv_B = \sqrt{\frac{2gh}{1 + 0.5}} = \sqrt{\frac{4}{3}gh} \approx 1.15\sqrt{gh} Its linear acceleration is aB=23gsin⁡θa_B = \frac{2}{3}g\sin\theta.

Because aB>aAa_B > a_A, Wheel B accelerates faster and reaches the bottom first.

03

Common Pitfall

A common misconception is that a larger moment of inertia provides more "forward momentum" to carry an object downhill faster. In reality, moment of inertia represents rotational resistance, not driving force. A wheel with a larger II requires a greater proportion of the available gravitational potential energy to be converted into rotational kinetic energy, leaving less energy available for linear translation downhill.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student concludes Wheel A reaches the bottom first under the misconception that greater rotational inertia or rim concentration imparts more forward momentum to speed down the incline.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    IA=(3.00)(0.400)2=0.480 kg⋅m2I_A = (3.00)(0.400)^2 = 0.480\text{ kg}\cdot\text{m}^2 ⟹\Longrightarrow IB=0.5(3.00)(0.400)2=0.240 kg⋅m2I_B = 0.5(3.00)(0.400)^2 = 0.240\text{ kg}\cdot\text{m}^2

  2. Step 2

    Wheel A has greater rotational inertia because all mass is at the rim.

  3. Step 3

    Greater rotational inertia provides more rotational momentum to roll downhill faster.

    Correct

    A larger rotational inertia resists rotational acceleration and diverts a larger fraction of potential energy into rotational kinetic energy: mgh=12Mv2+12Iω2mgh = \frac{1}{2}Mv^2 + \frac{1}{2}I\omega^2.

    Rotational inertia (II) measures an object's resistance to angular acceleration, not an internal driving force. When released from rest, an object with a larger II requires more torque and converts more gravitational potential energy into rotational kinetic energy, leaving less kinetic energy for forward translational motion (v=2gh1+I/(MR2)v = \sqrt{\frac{2gh}{1 + I/(MR^2)}}).

  4. Step 4

    Wheel A reaches the bottom first.

    Correct

    Wheel B reaches the bottom first.

    Because of the misconception in the previous step, your final selection was inverted. Wheel B has the lower moment of inertia, so it translates faster downhill and arrives first.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately calculated both numerical values for the moments of inertia.

You correctly identified that mass located farther from the rotation axis increases rotational inertia.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misinterpreting rotational inertia as driving momentum

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated moment of inertia as a quantity that propels or gives forward momentum to a rolling body, rather than recognizing it as the rotational analog of mass that resists angular acceleration and consumes available potential energy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical meaning of rotational inertia
  • Rotational inertia II measures sluggishness or resistance to changes in rotational motion, analogous to translational mass mm resisting linear acceleration.

  • Treat a larger II as requiring more effort to spin up, which slows down the translational speed during rolling without slipping.

Energy distribution in rolling without slipping
  • Mechanical energy divides between linear and rotational kinetic energy: mgh=12Mv2+12Iω2=12Mv2(1+IMR2)mgh = \frac{1}{2}Mv^2 + \frac{1}{2}I\omega^2 = \frac{1}{2}Mv^2\left(1 + \frac{I}{MR^2}\right).

  • Use the energy conservation equation to see that larger IMR2\frac{I}{MR^2} reduces the final translational speed vv.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up conservation of mechanical energy for rolling without slipping: Mgh=12Mv2+12I(vR)2=12Mv2(1+IMR2)Mgh = \frac{1}{2}Mv^2 + \frac{1}{2}I\left(\frac{v}{R}\right)^2 = \frac{1}{2}Mv^2\left(1 + \frac{I}{MR^2}\right).

  2. Solve for linear speed: v=2gh1+IMR2v = \sqrt{\frac{2gh}{1 + \frac{I}{MR^2}}}.

  3. Compare the geometric factors: IAMR2=1\frac{I_A}{MR^2} = 1 gives vA=ghv_A = \sqrt{gh}, while IBMR2=0.5\frac{I_B}{MR^2} = 0.5 gives vB=43gh≈1.15ghv_B = \sqrt{\frac{4}{3}gh} \approx 1.15\sqrt{gh}.

  4. Conclude that Wheel B has greater acceleration (aB=23gsin⁡θ>aA=12gsin⁡θa_B = \frac{2}{3}g\sin\theta > a_A = \frac{1}{2}g\sin\theta) and reaches the bottom first.

Final answer

Wheel B reaches the bottom first because its smaller moment of inertia diverts less energy into rotation, allowing greater linear acceleration.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how total mechanical energy is partitioned into translational and rotational kinetic energy for rolling bodies.

  • Practice deriving linear acceleration a=gsin⁡θ1+I/(MR2)a = \frac{g\sin\theta}{1 + I/(MR^2)} using both torque-force dynamics and energy methods.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the radius when calculating rotational inertia, leading to incorrect numerical values.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    IA=MR=(3.00)(0.400)=1.20 kg⋅m2I_A = MR = (3.00)(0.400) = 1.20\text{ kg}\cdot\text{m}^2

    Correct

    IA=MR2=(3.00 kg)(0.400 m)2=0.480 kg⋅m2I_A = MR^2 = (3.00\text{ kg})(0.400\text{ m})^2 = 0.480\text{ kg}\cdot\text{m}^2

    You wrote the formula as MRMR instead of MR2MR^2, forgetting to square the radius RR.

  2. Step 2

    IB=(1/2)MR=0.5(3.00)(0.400)=0.600 kg⋅m2I_B = (1/2)MR = 0.5(3.00)(0.400) = 0.600\text{ kg}\cdot\text{m}^2

    Correct

    IB=12MR2=0.5(3.00 kg)(0.400 m)2=0.240 kg⋅m2I_B = \frac{1}{2}MR^2 = 0.5(3.00\text{ kg})(0.400\text{ m})^2 = 0.240\text{ kg}\cdot\text{m}^2

    You repeated the same omission here by multiplying by RR rather than R2R^2.

  3. Step 3

    Wheel B reaches the bottom first. ⟹ Rotational inertia resists rolling acceleration, so Wheel B accelerates faster because IB<IAI_B < I_A.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that Wheel B reaches the bottom of the incline first.

You accurately explained that rotational inertia resists rolling acceleration, so a smaller rotational inertia yields a greater linear acceleration.

You carried out the arithmetic for your written expressions accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted exponent in moment of inertia formula

No, this was an algebraic formula error where the radius was not squared in both calculations.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the geometric scaling of the moment of inertia as linear with radius (MRMR) instead of quadratic (MR2MR^2). Moment of inertia has dimensions of mass times length squared (kg⋅m2\text{kg}\cdot\text{m}^2), which arises from integrating distance squared over mass: I=∫r2 dmI = \int r^2\,dm.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Consistency Check
  • Rotational inertia has SI units of kg⋅m2\text{kg}\cdot\text{m}^2, which requires squaring the distance/radius factor (R2R^2).

  • Before calculating, verify that the units of your formula match the required units: [M][R]2=kg⋅m2[M][R]^2 = \text{kg}\cdot\text{m}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write down the standard rotational inertia formulas with the radius squared: IA=MR2I_A = MR^2 and IB=12MR2I_B = \frac{1}{2}MR^2.

  2. Substitute M=3.00 kgM = 3.00\text{ kg} and R=0.400 mR = 0.400\text{ m}: IA=(3.00 kg)(0.400 m)2=3.00⋅0.160=0.480 kg⋅m2I_A = (3.00\text{ kg})(0.400\text{ m})^2 = 3.00 \cdot 0.160 = 0.480\text{ kg}\cdot\text{m}^2.

  3. Compute IBI_B: IB=12(3.00 kg)(0.400 m)2=0.5⋅3.00⋅0.160=0.240 kg⋅m2I_B = \frac{1}{2}(3.00\text{ kg})(0.400\text{ m})^2 = 0.5 \cdot 3.00 \cdot 0.160 = 0.240\text{ kg}\cdot\text{m}^2.

Final answer

(a) IA=0.480 kg⋅m2I_A = 0.480\text{ kg}\cdot\text{m}^2, IB=0.240 kg⋅m2I_B = 0.240\text{ kg}\cdot\text{m}^2; (b) Wheel B reaches the bottom first because IB<IAI_B < I_A.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental definition of moment of inertia (I=∑miri2I = \sum m_i r_i^2) to reinforce why distance is always squared.

  • Double-check dimensional units whenever computing rotational quantities to catch missing powers of length.

OverviewACEpath Teacher's Diagnosis

03 The student believes that identical mass and radius mean both wheels must roll down at the same rate, ignoring how mass distribution alters acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    IA=(3.00)(0.400)2=0.480 kg⋅m2  ⟹  IB=12(3.00)(0.400)2=0.240 kg⋅m2I_A = (3.00)(0.400)^2 = 0.480\text{ kg}\cdot\text{m}^2 \implies I_B = \frac{1}{2}(3.00)(0.400)^2 = 0.240\text{ kg}\cdot\text{m}^2

  2. Step 2

    Both wheels have identical mass M=3.00 kgM = 3.00\text{ kg} and radius R=0.400 mR = 0.400\text{ m}. Gravity acts equally on equal total masses, so both wheels tie and reach the bottom together.

    Correct

    Wheel B reaches the bottom first because its smaller moment of inertia (IB=12MR2<IA=MR2I_B = \frac{1}{2}MR^2 < I_A = MR^2) diverts less potential energy into rotational kinetic energy, resulting in a higher linear acceleration (aB=23gsin⁡θ>aA=12gsin⁡θa_B = \frac{2}{3}g\sin\theta > a_A = \frac{1}{2}g\sin\theta).

    While gravity exerts equal downward forces on equal masses, rolling without slipping requires potential energy to be partitioned into both translational and rotational kinetic energy (mgh=12Mv2+12Iω2mgh = \frac{1}{2}Mv^2 + \frac{1}{2}I\omega^2). Wheel A has all its mass at the outer rim, giving it twice the rotational inertia of Wheel B, so more energy is locked into rotation and its translational acceleration is smaller.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly evaluated the numerical moments of inertia for both the hoop and the disk.

You clearly recognized that both objects share identical total mass and outer radius.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting rotational inertia in rolling motion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated rolling on an incline as if the objects were frictionless sliding blocks in free fall, overlooking that mass distribution determines the moment of inertia, which directly controls the partitioning of energy between translation and rotation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Energy Partition in Rolling
  • mgh=12Mv2+12Iω2=12Mv2(1+IMR2)mgh = \frac{1}{2}Mv^2 + \frac{1}{2}I\omega^2 = \frac{1}{2}Mv^2\left(1 + \frac{I}{MR^2}\right) for rolling without slipping.

  • Check the shape factor β=IMR2\beta = \frac{I}{MR^2}; an object with a larger β\beta channels more energy into rotation and less into linear speed downhill.

Linear Acceleration on an Incline
  • a=gsin⁡θ1+IMR2a = \frac{g\sin\theta}{1 + \frac{I}{MR^2}}.

  • Evaluate linear acceleration using both total mass and moment of inertia rather than assuming identical masses experience identical linear acceleration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the total mechanical energy conservation equation for rolling without slipping: Mgh=12Mv2+12I(vR)2=12Mv2(1+IMR2)Mgh = \frac{1}{2}Mv^2 + \frac{1}{2}I\left(\frac{v}{R}\right)^2 = \frac{1}{2}Mv^2\left(1 + \frac{I}{MR^2}\right).

  2. Solve for linear speed at the bottom: v=2gh1+IMR2v = \sqrt{\frac{2gh}{1 + \frac{I}{MR^2}}}.

  3. Compare the two wheels: for Wheel A, IAMR2=1  ⟹  vA=gh\frac{I_A}{MR^2} = 1 \implies v_A = \sqrt{gh}; for Wheel B, IBMR2=12  ⟹  vB=43gh\frac{I_B}{MR^2} = \frac{1}{2} \implies v_B = \sqrt{\frac{4}{3}gh}.

  4. Since vB>vAv_B > v_A (and acceleration aB=23gsin⁡θ>aA=12gsin⁡θa_B = \frac{2}{3}g\sin\theta > a_A = \frac{1}{2}g\sin\theta), Wheel B reaches the bottom in less time.

Final answer

(a) IA=0.480 kg⋅m2I_A = 0.480\text{ kg}\cdot\text{m}^2, IB=0.240 kg⋅m2I_B = 0.240\text{ kg}\cdot\text{m}^2; (b) Wheel B reaches the bottom first because its mass is concentrated closer to the center, yielding a smaller moment of inertia and higher translational acceleration.

NEXT STEPS
Final Takeaways from Your Teacher
  • Express rolling kinetic energy as the sum of translational (Ktrans=12Mv2K_{\text{trans}} = \frac{1}{2}Mv^2) and rotational (Krot=12Iω2K_{\text{rot}} = \frac{1}{2}I\omega^2) parts.

  • Practice using the incline acceleration formula a=gsin⁡θ1+I/(MR2)a = \frac{g\sin\theta}{1 + I/(MR^2)} to quickly compare different rolling shapes.

Lock it in

Similar question

01

A solid cylinder (I=12MR2I = \frac{1}{2}MR^2) and a thin spherical shell (I=23MR2I = \frac{2}{3}MR^2) of identical mass MM and radius RR roll without slipping down the same ramp. Determine the ratio of their translational accelerations, acylashell\frac{a_{\text{cyl}}}{a_{\text{shell}}}.

Answer

Using a=gsin⁡θ1+βa = \frac{g\sin\theta}{1 + \beta} where β=IMR2\beta = \frac{I}{MR^2}: For the solid cylinder, β=12\beta = \frac{1}{2}, so acyl=gsin⁡θ1+0.5=23gsin⁡θa_{\text{cyl}} = \frac{g\sin\theta}{1 + 0.5} = \frac{2}{3}g\sin\theta. For the spherical shell, β=23\beta = \frac{2}{3}, so ashell=gsin⁡θ1+2/3=35gsin⁡θa_{\text{shell}} = \frac{g\sin\theta}{1 + 2/3} = \frac{3}{5}g\sin\theta. The ratio is acylashell=2/33/5=109≈1.11\frac{a_{\text{cyl}}}{a_{\text{shell}}} = \frac{2/3}{3/5} = \frac{10}{9} \approx 1.11.

02

A uniform solid disk of mass M=2.0 kgM = 2.0\text{ kg} and radius R=0.25 mR = 0.25\text{ m} rolls without slipping from rest down a ramp of vertical height h=1.8 mh = 1.8\text{ m}. Calculate its linear speed vv at the bottom of the ramp (take g=9.8 m/s2g = 9.8\text{ m/s}^2).

Answer

Apply conservation of mechanical energy: Mgh=12Mv2+12Iω2Mgh = \frac{1}{2}Mv^2 + \frac{1}{2}I\omega^2. Since I=12MR2I = \frac{1}{2}MR^2 and ω=vR\omega = \frac{v}{R}, this simplifies to Mgh=34Mv2Mgh = \frac{3}{4}Mv^2. Solving for vv: v=43gh=43(9.8)(1.8)=23.52≈4.85 m/sv = \sqrt{\frac{4}{3}gh} = \sqrt{\frac{4}{3}(9.8)(1.8)} = \sqrt{23.52} \approx 4.85\text{ m/s}.

03

A cylindrical spool consists of an inner axle of radius rr and two outer flanges of radius RR and total mass MM. Explain qualitatively how shifting mass from the axle to the outer flanges affects the spool's time to roll down an incline of height hh.

Answer

Shifting mass from the axle to the outer flanges increases the mass elements' radial distances rir_i from the central axis. Because I=∫r2 dmI = \int r^2\,dm, the moment of inertia II increases significantly. A higher II requires a greater share of gravitational potential energy to be converted into rotational kinetic energy rather than translational kinetic energy, resulting in lower linear acceleration a=gsin⁡θ1+I/(MR2)a = \frac{g\sin\theta}{1 + I/(MR^2)} and therefore a longer time to reach the bottom.

Loading workspace…