Resources

A diver stands on a springboard positioned at a coordinate of y0=+3.00 my_0 = +3.00\text{ m} along a vertical axis where the origin y=0 my = 0\text{ m} is set at the water surface and the positive yy-axis points vertically upward. The diver steps off the board, falls vertically into the pool, and descends to a depth of 4.50 m4.50\text{ m} below the water's surface before arresting downward motion. Calculate: (a) the coordinate of the diver's lowest position yfy_f, (b) the vertical displacement Δy\Delta y of the diver from the springboard to the lowest point, taking full account of directional sign, and (c) the total scalar distance dd traveled through the air and water.

Answer and steps

Final answer

(a) Lowest position: yf=−4.50 my_f = -4.50\text{ m}; (b) Vertical displacement: Δy=−7.50 m\Delta y = -7.50\text{ m}; (c) Total distance: d=7.50 md = 7.50\text{ m}.

Steps

01

Establish the Coordinate System

In one-dimensional vertical motion, positions are defined relative to a chosen origin (y=0 my = 0\text{ m}) and a chosen positive direction:

  • Origin (y=0 my = 0\text{ m}): Water surface.
  • Positive direction (+y+y): Vertically upward.
  • Negative direction (−y-y): Vertically downward (below the water surface).
  • Initial position: y0=+3.00 my_0 = +3.00\text{ m} (on the springboard).

02

(a) Determine the Coordinate of the Lowest Position (yfy_f)

The diver reaches a maximum depth of 4.50 m4.50\text{ m} below the water's surface:

  • Since the surface is y=0 my = 0\text{ m} and downward positions have negative coordinates, moving 4.50 m4.50\text{ m} below the surface corresponds to: yf=−4.50 my_f = -4.50\text{ m}

03

(b) Calculate the Vertical Displacement (Δy\Delta y)

Displacement is a vector quantity defined as the straight-line change in position from start to finish: Δy=yf−y0\Delta y = y_f - y_0

Substitute the known positions: Δy=−4.50 m−(+3.00 m)=−7.50 m\Delta y = -4.50\text{ m} - (+3.00\text{ m}) = -7.50\text{ m}

  • Interpretation: The negative sign signifies that the diver's net displacement is directed vertically downward.

Common Pitfall: Do not confuse displacement with position. A position coordinate specifies where an object is located relative to the origin, whereas displacement describes the change in position between two points.


04

(c) Calculate the Total Scalar Distance (dd)

Distance is the total length of the path traveled and is always a non-negative scalar quantity.

Because the diver moves in a single, uninterrupted downward direction from the board to the lowest point: d=∣Δy∣=∣−7.50 m∣=7.50 md = |\Delta y| = |-7.50\text{ m}| = 7.50\text{ m}

Alternatively, calculate the sum of the path segments in air and in water: d=dair+dwater=3.00 m+4.50 m=7.50 md = d_{\text{air}} + d_{\text{water}} = 3.00\text{ m} + 4.50\text{ m} = 7.50\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats depth as a positive coordinate value instead of assigning a negative coordinate below the origin, which propagates to an incorrect displacement.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Depth below surface=4.50 m  ⟹  yf=4.50 m\text{Depth below surface} = 4.50\text{ m} \implies y_f = 4.50\text{ m}

    Correct

    yf=−4.50 my_f = -4.50\text{ m}

    Because the origin y=0 my = 0\text{ m} is at the water surface and the positive yy-axis points upward, any position below the surface must have a negative coordinate.

  2. Step 2

    Δy=yf−y0  ⟹  Δy=4.50 m−3.00 m=+1.50 m\Delta y = y_f - y_0 \implies \Delta y = 4.50\text{ m} - 3.00\text{ m} = +1.50\text{ m}

    Correct

    Δy=yf−y0=−4.50 m−(+3.00 m)=−7.50 m\Delta y = y_f - y_0 = -4.50\text{ m} - (+3.00\text{ m}) = -7.50\text{ m}

    Your definition Δy=yf−y0\Delta y = y_f - y_0 is completely correct, but substituting the positive coordinate from Step 1 caused the resulting displacement to carry the wrong magnitude and sign.

  3. Step 3

    d=3.00 m+4.50 m=7.50 md = 3.00\text{ m} + 4.50\text{ m} = 7.50\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You stated the correct definition for one-dimensional displacement as the change in coordinate position.

You calculated the total scalar distance accurately by adding the distances traveled in the air and through the water.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in coordinate assignment relative to the origin

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated depth as a positive coordinate value instead of assigning a negative coordinate to a location lying in the negative direction relative to the origin.

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish coordinate signs from the origin
  • A coordinate value specifies position along an axis: points in the direction of the axis arrow relative to the origin are positive, while points in the opposite direction are negative.

  • Always draw a quick vertical axis, mark the origin (y=0y = 0), and verify whether each position lies in the positive region (y>0y > 0) or the negative region (y<0y < 0).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the lowest point relative to the origin: 4.50 m4.50\text{ m} below the surface gives yf=−4.50 my_f = -4.50\text{ m}.

  2. Substitute yf=−4.50 my_f = -4.50\text{ m} and y0=+3.00 my_0 = +3.00\text{ m} into the displacement formula: Δy=yf−y0=−4.50 m−3.00 m=−7.50 m\Delta y = y_f - y_0 = -4.50\text{ m} - 3.00\text{ m} = -7.50\text{ m}.

Final answer

(a) yf=−4.50 my_f = -4.50\text{ m}; (b) Δy=−7.50 m\Delta y = -7.50\text{ m}; (c) d=7.50 md = 7.50\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the vertical axis with the origin and positive direction clearly marked before writing down numerical coordinates.

  • Check whether your displacement sign matches the physical direction of net motion (a downward drop must yield a negative Δy\Delta y when upward is positive).

OverviewACEpath Teacher's Diagnosis

02 The student reverses the order of subtraction in the displacement formula by calculating initial minus final position instead of final minus initial position.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Lowest position is \text{Lowest position is } 4.50 m below water surface\text{ m below water surface}   ⟹  \implies y_f = -4.50 m\text{ m}

  2. Step 2

    Δ\Delta y = y_0 - y_f   ⟹  \implies Δ\Delta y = 3.00 m\text{ m} - (-4.50 m\text{ m}) = +7.50 m\text{ m}

    Correct

    Δ\Delta y = y_f - y_0 = -4.50 m\text{ m} - (+3.00 m\text{ m}) = -7.50 m\text{ m}

    Displacement represents the change in position and is defined as final position minus initial position (Δy=yf−y0\Delta y = y_f - y_0). Because you wrote initial minus final (y0−yfy_0 - y_f), you obtained a positive value (+7.50 m+7.50\text{ m}) indicating upward motion instead of the actual downward displacement (−7.50 m-7.50\text{ m}).

  3. Step 3

    d = 3.00 m\text{ m} + 4.50 m\text{ m} = 7.50 m\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly assigned a negative sign to the coordinate below the water surface.

You correctly summed the path lengths to find the scalar distance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed displacement subtraction order

You subtracted the final coordinate from the initial coordinate instead of subtracting the initial from the final.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the change operator Δ\Delta with larger-minus-smaller subtraction, leading to a reversed vector direction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Displacement
  • Displacement is always Δy=yfinal−yinitial\Delta y = y_\text{final} - y_\text{initial}, never initial minus final.

  • Write the formula as Δy=yf−y0\Delta y = y_f - y_0 before substituting values, and check that the resulting sign matches the physical direction of motion.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the definition of displacement: Δy=yf−y0\Delta y = y_f - y_0

  2. Substitute yf=−4.50 my_f = -4.50\text{ m} and y0=+3.00 my_0 = +3.00\text{ m}: Δy=−4.50 m−3.00 m\Delta y = -4.50\text{ m} - 3.00\text{ m}

  3. Simplify the arithmetic: Δy=−7.50 m\Delta y = -7.50\text{ m}

Final answer

(a) yf=−4.50 my_f = -4.50\text{ m}; (b) Δy=−7.50 m\Delta y = -7.50\text{ m}; (c) d=7.50 md = 7.50\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out Δy=yf−y0\Delta y = y_f - y_0 before plugging in numerical values.

  • Perform a sanity check on the sign: if the motion ends up below the starting point along a positive-up axis, Δy\Delta y must be negative.

OverviewACEpath Teacher's Diagnosis

03 The student confuses scalar distance with signed displacement and reports a negative value with a directional sign for total distance.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    yf=−4.50 my_f = -4.50\text{ m}

  2. Step 2

    Δy=yf−y0  ⟹  Δy=−4.50 m−3.00 m=−7.50 m\Delta y = y_f - y_0 \implies \Delta y = -4.50\text{ m} - 3.00\text{ m} = -7.50\text{ m}

  3. Step 3

    d=Δy  ⟹  d=−7.50 md = \Delta y \implies d = -7.50\text{ m}

    Correct

    d=∣Δy∣=∣−7.50 m∣=7.50 md = |\Delta y| = |-7.50\text{ m}| = 7.50\text{ m}

    Distance is the total length of the path traveled and is strictly a non-negative scalar quantity (d≥0d \ge 0). Because the diver traveled in one direction without reversing, the distance is the magnitude of the displacement: d=∣Δy∣=7.50 md = |\Delta y| = 7.50\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established the coordinate of the lowest point below the water surface.

You correctly applied the formula for displacement and included the correct negative sign for downward motion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing scalar distance with signed displacement

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You set distance equal to displacement without taking the absolute value. Displacement is a vector that carries a directional sign (positive or negative in 1D), whereas distance measures path length and is always non-negative.

REASONING PATH
Your ACEpath teacher’s suggested approach
Scalar Distance vs. Vector Displacement
  • Displacement Δy\Delta y indicates net change in position and includes direction (++ or −-), while distance dd is a scalar indicating total path length traveled and is always non-negative (d≥0d \ge 0).

  • When motion is along a single straight line in one direction, calculate distance by taking the absolute value of the displacement: d=∣Δy∣d = |\Delta y|.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that the diver moves unidirectionally downward, so distance is the magnitude of the displacement.

  2. Apply the scalar magnitude: d=∣Δy∣=∣−7.50 m∣=7.50 md = |\Delta y| = |-7.50\text{ m}| = 7.50\text{ m}.

Final answer

(a) yf=−4.50 my_f = -4.50\text{ m}; (b) Δy=−7.50 m\Delta y = -7.50\text{ m}; (c) d=7.50 md = 7.50\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental difference between vectors (which have magnitude and sign/direction in 1D) and scalars (which describe magnitude only).

  • Practice distinguishing between total distance traveled and net displacement, especially when motion involves directional reversals.

Lock it in

Similar question

01

A drone hovers at an altitude of 12.0 m12.0\text{ m} above the edge of a cliff. The origin y=0 my = 0\text{ m} is set at the cliff edge, with vertically upward taken as positive. The drone then descends to land on a ledge 8.0 m8.0\text{ m} below the cliff edge. Find: (a) the coordinate of the ledge yfy_f, and (b) the drone's vertical displacement Δy\Delta y.

Answer

(a) yf=−8.0 my_f = -8.0\text{ m}; (b) Δy=−20.0 m\Delta y = -20.0\text{ m}. Key steps: Since the ledge is below the origin, yf=−8.0 my_f = -8.0\text{ m}. The displacement is Δy=yf−y0=−8.0 m−(+12.0 m)=−20.0 m\Delta y = y_f - y_0 = -8.0\text{ m} - (+12.0\text{ m}) = -20.0\text{ m}.

02

A spelunker enters a cave opening at y=0 my = 0\text{ m} (upward is positive). She descends 15.0 m15.0\text{ m} to a cavern floor, then climbs back up 5.0 m5.0\text{ m} onto a boulder. Calculate: (a) her final position coordinate yfy_f, (b) her overall displacement Δy\Delta y, and (c) the total distance dd she traveled.

Answer

(a) yf=−10.0 my_f = -10.0\text{ m}; (b) Δy=−10.0 m\Delta y = -10.0\text{ m}; (c) d=20.0 md = 20.0\text{ m}. Key steps: Lowest point is at −15.0 m-15.0\text{ m}, climbing up 5.0 m5.0\text{ m} places her at yf=−15.0 m+5.0 m=−10.0 my_f = -15.0\text{ m} + 5.0\text{ m} = -10.0\text{ m}. Displacement is Δy=−10.0 m−0=−10.0 m\Delta y = -10.0\text{ m} - 0 = -10.0\text{ m}. Total distance is d=15.0 m+5.0 m=20.0 md = 15.0\text{ m} + 5.0\text{ m} = 20.0\text{ m}.

03

A research submarine is at a depth of 50 m50\text{ m} below sea level. It rises 20 m20\text{ m}, then dives downward 45 m45\text{ m}. Taking sea level as the origin y=0 my = 0\text{ m} with the positive yy-axis pointing upward, determine the submarine's initial position y0y_0, final position yfy_f, net displacement Δy\Delta y, and total distance traveled dd.

Answer

y0=−50 my_0 = -50\text{ m}, yf=−75 my_f = -75\text{ m}, Δy=−25 m\Delta y = -25\text{ m}, d=65 md = 65\text{ m}. Key steps: Initial position is y0=−50 my_0 = -50\text{ m}. After rising to −30 m-30\text{ m} and diving 45 m45\text{ m}, final position is yf=−30 m−45 m=−75 my_f = -30\text{ m} - 45\text{ m} = -75\text{ m}. Displacement is Δy=yf−y0=−75 m−(−50 m)=−25 m\Delta y = y_f - y_0 = -75\text{ m} - (-50\text{ m}) = -25\text{ m}. Distance is d=20 m+45 m=65 md = 20\text{ m} + 45\text{ m} = 65\text{ m}.

Loading workspace…