Resources

A point charge q1=+4.50 μCq_1 = +4.50\text{ }\mu\text{C} is held fixed at the origin of a Cartesian coordinate system. A second point charge q2=−2.00 μCq_2 = -2.00\text{ }\mu\text{C} is initially held at point AA located at (x,y)=(0.300 m,0 m)(x, y) = (0.300\text{ m}, 0\text{ m}). (a) Calculate the electric potential VAV_A at point AA due exclusively to q1q_1. (b) Determine the electric potential energy UU of the two-charge system when q2q_2 is positioned at point AA. (c) If q2q_2 is released from rest and moves along the xx-axis to point BB located at (0.800 m,0 m)(0.800\text{ m}, 0\text{ m}), calculate the work WfieldW_{\text{field}} done by the electric force on q2q_2. Assume V=0 VV = 0\text{ V} at infinity and Coulomb's constant ke=8.99×109 N⋅m2/C2k_e = 8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2.

Answer and steps

Final answer

(a) VA=+1.35×105 VV_A = +1.35 \times 10^5\text{ V}; (b) U=−0.270 JU = -0.270\text{ J}; (c) Wfield=−0.169 JW_{\text{field}} = -0.169\text{ J}.

Steps

Part (a): Electric Potential at Point AA

The electric potential VV created by a point charge q1q_1 at a distance rr is given by:

V=keq1rV = \frac{k_e q_1}{r}

where:

  • ke=8.99×109 N⋅m2/C2k_e = 8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2
  • q1=+4.50 μC=+4.50×10−6 Cq_1 = +4.50\text{ }\mu\text{C} = +4.50 \times 10^{-6}\text{ C}
  • The distance to point AA is rA=0.300 mr_A = 0.300\text{ m}

Substitute the known values into the equation:

VA=(8.99×109 N⋅m2/C2)(4.50×10−6 C)0.300 m=+1.3485×105 VV_A = \frac{(8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2)(4.50 \times 10^{-6}\text{ C})}{0.300\text{ m}} = +1.3485 \times 10^5\text{ V}

Rounding to three significant figures: VA=+1.35×105 VV_A = +1.35 \times 10^5\text{ V}


Part (b): Electric Potential Energy of the System

The electric potential energy UU of a two-charge configuration can be calculated directly from the electric potential created by q1q_1 at the location of q2q_2:

U=q2VA=keq1q2rAU = q_2 V_A = \frac{k_e q_1 q_2}{r_A}

Substitute q2=−2.00 μC=−2.00×10−6 Cq_2 = -2.00\text{ }\mu\text{C} = -2.00 \times 10^{-6}\text{ C} and VA=1.3485×105 VV_A = 1.3485 \times 10^5\text{ V}:

U=(−2.00×10−6 C)(1.3485×105 V)=−0.2697 JU = (-2.00 \times 10^{-6}\text{ C})(1.3485 \times 10^5\text{ V}) = -0.2697\text{ J}

Rounding to three significant figures: U=−0.270 JU = -0.270\text{ J}

Key Note on Signs: Unlike electric force and field, which are vector quantities, electric potential and potential energy are scalars. You must include the algebraic sign of each charge. The negative potential energy indicates a bound (attractive) system relative to infinity.


Part (c): Work Done by the Electric Field

The work done by a conservative electric field on a charge as it moves from an initial point AA to a final point BB is equal to the negative change in electric potential energy:

Wfield=−ΔU=−(UB−UA)=UA−UBW_{\text{field}} = -\Delta U = -(U_B - U_A) = U_A - U_B

Alternatively, expressing in terms of potential difference: Wfield=−q2(VB−VA)W_{\text{field}} = -q_2(V_B - V_A)

  1. Calculate the potential at point BB (rB=0.800 mr_B = 0.800\text{ m}):

    VB=keq1rB=(8.99×109 N⋅m2/C2)(4.50×10−6 C)0.800 m=5.0569×104 VV_B = \frac{k_e q_1}{r_B} = \frac{(8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2)(4.50 \times 10^{-6}\text{ C})}{0.800\text{ m}} = 5.0569 \times 10^4\text{ V}

  2. Calculate the potential energy at point BB:

    UB=q2VB=(−2.00×10−6 C)(5.0569×104 V)=−0.1011 JU_B = q_2 V_B = (-2.00 \times 10^{-6}\text{ C})(5.0569 \times 10^4\text{ V}) = -0.1011\text{ J}

  3. Calculate the work done by the field:

    Wfield=UA−UB=(−0.2697 J)−(−0.1011 J)=−0.1686 JW_{\text{field}} = U_A - U_B = (-0.2697\text{ J}) - (-0.1011\text{ J}) = -0.1686\text{ J}

Rounding to three significant figures: Wfield=−0.169 JW_{\text{field}} = -0.169\text{ J}

Common Pitfall: Because q1q_1 is positive and q2q_2 is negative, the electric force on q2q_2 pulls it toward the origin (−x-x direction). Since q2q_2 moves outward from x=0.300 mx = 0.300\text{ m} to x=0.800 mx = 0.800\text{ m} (+x+x direction), the electric force acts opposite to the displacement, making WfieldW_{\text{field}} negative.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student drops the negative sign of charge q2 when calculating potential energy, treating it as an absolute magnitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    VA=ke⋅q1rA=(8.99×109)(4.50×10−6)/0.300=1.35×105 VV_A = k_e \cdot \frac{q_1}{r_A} = (8.99 \times 10^9)(4.50 \times 10^{-6})/0.300 = 1.35 \times 10^5\text{ V}

  2. Step 2

    U=q2⋅VA=(2.00×10−6 C)(1.35×105 V)=0.270 JU = q_2 \cdot V_A = (2.00 \times 10^{-6}\text{ C})(1.35 \times 10^5\text{ V}) = 0.270\text{ J}

    Correct

    U=q2VA=(−2.00×10−6 C)(1.35×105 V)=−0.270 JU = q_2 V_A = (-2.00 \times 10^{-6}\text{ C})(1.35 \times 10^5\text{ V}) = -0.270\text{ J}

    Electric potential energy is a scalar quantity, so you must include the negative sign of q2=−2.00 μCq_2 = -2.00\text{ }\mu\text{C}. The resulting potential energy should be negative.

  3. Step 3

    VB=(8.99×109)(4.50×10−6)0.800=5.06×104 V  ⟹  UB=(2.00×10−6 C)(5.06×104 V)=0.101 JV_B = \frac{(8.99 \times 10^9)(4.50 \times 10^{-6})}{0.800} = 5.06 \times 10^4\text{ V} \implies U_B = (2.00 \times 10^{-6}\text{ C})(5.06 \times 10^4\text{ V}) = 0.101\text{ J}

    Correct

    VB=5.06×104 V  ⟹  UB=(−2.00×10−6 C)(5.06×104 V)=−0.101 JV_B = 5.06 \times 10^4\text{ V} \implies U_B = (-2.00 \times 10^{-6}\text{ C})(5.06 \times 10^4\text{ V}) = -0.101\text{ J}

    Your potential VBV_B is correct, but UBU_B carries over the dropped negative sign on q2q_2, yielding +0.101 J+0.101\text{ J} instead of −0.101 J-0.101\text{ J}.

  4. Step 4

    Wfield=−(UB−UA)=−(0.101 J−0.270 J)=+0.169 JW_{\text{field}} = -(U_B - U_A) = -(0.101\text{ J} - 0.270\text{ J}) = +0.169\text{ J}

    Correct

    Wfield=−(UB−UA)=−[(−0.101 J)−(−0.270 J)]=−0.169 JW_{\text{field}} = -(U_B - U_A) = -[(-0.101\text{ J}) - (-0.270\text{ J})] = -0.169\text{ J}

    You applied the correct work-energy relation Wfield=−ΔUW_{\text{field}} = -\Delta U, but because the potential energies were missing their negative signs, your answer came out with the opposite sign. Since the attractive force pulls q2q_2 toward the origin while it moves outward, the electric field does negative work.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct formulas for electric potential, potential energy, and field work.

You computed the electric potential at point AA and point BB accurately.

You correctly related the work done by the electric field to the negative change in potential energy, Wfield=−ΔUW_{\text{field}} = -\Delta U.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dropped sign on negative charge in scalar energy calculation

You substituted the magnitude ∣q2∣=2.00 μC|q_2| = 2.00\text{ }\mu\text{C} instead of its algebraic value q2=−2.00 μCq_2 = -2.00\text{ }\mu\text{C}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating electric potential energy like Coulomb's law or electric field magnitude where signs indicate direction, rather than treating potential and potential energy as algebraic scalars where charge signs must be retained directly.

REASONING PATH
Your ACEpath teacher’s suggested approach
Scalar vs. Vector Sign Convention
  • Vectors (F⃗\vec{F}, E⃗\vec{E}) use charge magnitudes for size and signs for direction; scalars (VV, UU) always keep the algebraic sign of each charge.

  • Whenever you compute VV or UU, write out the full signed value of every charge, including parentheses around negative values like (−2.00×10−6 C)(-2.00 \times 10^{-6}\text{ C}).

Physical Reality Check on Work
  • If the electric force opposes the displacement, WfieldW_{\text{field}} must be negative.

  • Check the force direction: opposite charges attract, so q1q_1 pulls q2q_2 to the left while q2q_2 moves to the right, meaning the electric field does negative work.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. UA=q2VA=(−2.00×10−6 C)(1.35×105 V)=−0.270 JU_A = q_2 V_A = (-2.00 \times 10^{-6}\text{ C})(1.35 \times 10^5\text{ V}) = -0.270\text{ J}

  2. UB=q2VB=(−2.00×10−6 C)(5.06×104 V)=−0.101 JU_B = q_2 V_B = (-2.00 \times 10^{-6}\text{ C})(5.06 \times 10^4\text{ V}) = -0.101\text{ J}

  3. Wfield=−ΔU=UA−UB=(−0.270 J)−(−0.101 J)=−0.169 JW_{\text{field}} = -\Delta U = U_A - U_B = (-0.270\text{ J}) - (-0.101\text{ J}) = -0.169\text{ J}

Final answer

(a) VA=+1.35×105 VV_A = +1.35 \times 10^5\text{ V}; (b) U=−0.270 JU = -0.270\text{ J}; (c) Wfield=−0.169 JW_{\text{field}} = -0.169\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between vector equations (where signs set directions) and scalar equations (where signs set energy levels).

  • Practice checking whether work done by the field should be positive or negative by comparing the electric force vector with the displacement vector.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the sign definition of work done by an electric field with external work, writing W_field = ΔU instead of -ΔU.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    VA=ke⋅q1rA  ⟹  VA=(8.99×109)⋅4.50×10−60.300=1.35×105 VV_A = k_e \cdot \frac{q_1}{r_A} \implies V_A = (8.99 \times 10^9) \cdot \frac{4.50 \times 10^{-6}}{0.300} = 1.35 \times 10^5\text{ V}

  2. Step 2

    U=q2⋅VA  ⟹  U=(−2.00×10−6 C)⋅(1.35×105 V)=−0.270 JU = q_2 \cdot V_A \implies U = (-2.00 \times 10^{-6}\text{ C}) \cdot (1.35 \times 10^5\text{ V}) = -0.270\text{ J}

  3. Step 3

    VB=(8.99×109)(4.50×10−6)0.800=5.06×104 V  ⟹  UB=(−2.00×10−6 C)(5.06×104 V)=−0.101 JV_B = \frac{(8.99 \times 10^9)(4.50 \times 10^{-6})}{0.800} = 5.06 \times 10^4\text{ V} \implies U_B = (-2.00 \times 10^{-6}\text{ C})(5.06 \times 10^4\text{ V}) = -0.101\text{ J}

  4. Step 4

    Wfield=ΔU=UB−UA=−0.101 J−(−0.270 J)=+0.169 JW_{\text{field}} = \Delta U = U_B - U_A = -0.101\text{ J} - (-0.270\text{ J}) = +0.169\text{ J}

    Correct

    Wfield=−ΔU=−(UB−UA)=UA−UB=−0.270 J−(−0.101 J)=−0.169 JW_{\text{field}} = -\Delta U = -(U_B - U_A) = U_A - U_B = -0.270\text{ J} - (-0.101\text{ J}) = -0.169\text{ J}

    You defined the field work as ΔU\Delta U, which is the formula for work done by an external agent without acceleration (Wext=ΔUW_{\text{ext}} = \Delta U). For any conservative internal force like the electric field, work is related to potential energy by Wfield=−ΔUW_{\text{field}} = -\Delta U.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the formula V=keq1rV = \frac{k_e q_1}{r} to determine the electric potential at points AA and BB.

You properly preserved the negative sign of q2q_2 when computing electric potential energy U=q2VU = q_2 V.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention confusion between internal field work and external agent work

No slip occurred; this was a conceptual formula error involving the sign in the relationship between potential energy and conservative work.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the work done by the conservative electric field (Wfield=−ΔUW_{\text{field}} = -\Delta U) with the work done by an external force (Wext=+ΔUW_{\text{ext}} = +\Delta U). Because opposite charges attract, the electric force on q2q_2 points toward the origin while displacement points outward, meaning the field must do negative work.

REASONING PATH
Your ACEpath teacher’s suggested approach
Conservative Field Work Definition
  • For any conservative force field, Wfield=−ΔU=−qΔVW_{\text{field}} = -\Delta U = -q\Delta V.

  • Always verify whether a question asks for the work done by the field (−ΔU-\Delta U) or work done by an external agent (+ΔU+\Delta U).

Physical Direction Check
  • Work is positive when force and displacement are in the same direction, and negative when they are opposite.

  • Check the force direction: an attractive force points inward toward q1q_1, but q2q_2 moves outward, so the work done by the electric field must be negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the work-potential energy relationship for a conservative force: Wfield=−ΔU=−(UB−UA)W_{\text{field}} = -\Delta U = -(U_B - U_A).

  2. Substitute the previously calculated values: Wfield=−((−0.101 J)−(−0.270 J))=−(+0.169 J)W_{\text{field}} = -((-0.101\text{ J}) - (-0.270\text{ J})) = -(+0.169\text{ J}).

  3. Evaluate the final result: Wfield=−0.169 JW_{\text{field}} = -0.169\text{ J}.

Final answer

Wfield=−0.169 JW_{\text{field}} = -0.169\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between internal conservative work (Wint=−ΔUW_{\text{int}} = -\Delta U) and external work (Wext=+ΔUW_{\text{ext}} = +\Delta U).

  • Perform a physical sign check by drawing the vector arrows for the electric force and displacement before finalizing the calculation.

OverviewACEpath Teacher's Diagnosis

03 The student confuses electric potential with electric field and uses an inverse-square distance dependence in the denominator.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    VA=ke⋅q1rA2=(8.99×109)⋅4.50×10−6(0.300)2=4.50×105 VV_A = k_e \cdot \frac{q_1}{r_A^2} = (8.99 \times 10^9) \cdot \frac{4.50 \times 10^{-6}}{(0.300)^2} = 4.50 \times 10^5\text{ V}

    Correct

    VA=keq1rA=(8.99×109 N⋅m2/C2)(4.50×10−6 C)0.300 m=+1.35×105 VV_A = \frac{k_e q_1}{r_A} = \frac{(8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2)(4.50 \times 10^{-6}\text{ C})}{0.300\text{ m}} = +1.35 \times 10^5\text{ V}

    You squared the distance in the denominator, which calculates the electric field magnitude E=keqr2E = \frac{k_e q}{r^2} instead of the scalar electric potential V=keqrV = \frac{k_e q}{r}.

  2. Step 2

    U=q2⋅VA=(−2.00×10−6 C)(4.50×105 V)=−0.900 JU = q_2 \cdot V_A = (-2.00 \times 10^{-6}\text{ C})(4.50 \times 10^5\text{ V}) = -0.900\text{ J}

    Correct

    U=q2VA=(−2.00×10−6 C)(1.35×105 V)=−0.270 JU = q_2 V_A = (-2.00 \times 10^{-6}\text{ C})(1.35 \times 10^5\text{ V}) = -0.270\text{ J}

    Your formula U=q2VAU = q_2 V_A and handling of the negative charge sign are completely correct, but the numerical result is off because of the incorrect VAV_A from Step 1.

  3. Step 3

    VB=(8.99×109)⋅4.50×10−6(0.800)2=6.32×104 V  ⟹  UB=−0.126 J  ⟹  Wfield=−(UB−UA)=−0.774 JV_B = (8.99 \times 10^9) \cdot \frac{4.50 \times 10^{-6}}{(0.800)^2} = 6.32 \times 10^4\text{ V} \implies U_B = -0.126\text{ J} \implies W_{\text{field}} = -(U_B - U_A) = -0.774\text{ J}

    Correct

    VB=keq1rB=5.06×104 V  ⟹  UB=−0.101 J  ⟹  Wfield=−(UB−UA)=−0.169 JV_B = \frac{k_e q_1}{r_B} = 5.06 \times 10^4\text{ V} \implies U_B = -0.101\text{ J} \implies W_{\text{field}} = -(U_B - U_A) = -0.169\text{ J}

    You applied the work-energy relation Wfield=−ΔUW_{\text{field}} = -\Delta U with proper sign conventions, but the numerical outcome carried over the denominator squaring error from earlier.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the fundamental connection between electric potential and potential energy, U=qVU = qV.

You preserved the negative sign of q2q_2 properly when calculating scalar potential energy.

You correctly applied the work-energy theorem for conservative fields, Wfield=−ΔUW_{\text{field}} = -\Delta U.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse-Square vs. Inverse-Distance Confusion

You wrote r2r^2 instead of rr in the denominator when calculating electric potential.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the vector field quantity (electric field E⃗\vec{E}, which falls off as 1/r21/r^2) with the scalar energy quantity (electric potential VV, which falls off as 1/r1/r). Electric potential represents work per unit charge, so integrating F∝1/r2F \propto 1/r^2 over distance yields a 1/r1/r dependence.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional and Integral Check
  • Potential is related to field by V=−∫E⃗⋅dr⃗V = -\int \vec{E} \cdot d\vec{r}, meaning VV has units of (N/C)⋅m=J/C=V(\text{N}/\text{C}) \cdot \text{m} = \text{J}/\text{C} = \text{V}.

  • Whenever you calculate VV or UU, ensure the denominator has rr to the first power (keq/rk_e q / r), not r2r^2.

Quantity Classification
  • Force (F=ke∣q1q2∣/r2F = k_e |q_1 q_2|/r^2) and Electric Field (E=ke∣q∣/r2E = k_e |q|/r^2) are vectors with r2r^2 denominators; Potential Energy (U=keq1q2/rU = k_e q_1 q_2/r) and Potential (V=keq/rV = k_e q/r) are scalars with rr denominators.

  • Before writing an electrostatics formula, classify whether the target quantity is a vector (field/force →r2\rightarrow r^2) or a scalar (potential/energy →r\rightarrow r).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate VAV_A using the correct 1/r1/r dependence: VA=keq1rA=(8.99×109)(4.50×10−6)0.300=+1.3485×105 VV_A = \frac{k_e q_1}{r_A} = \frac{(8.99 \times 10^9)(4.50 \times 10^{-6})}{0.300} = +1.3485 \times 10^5\text{ V}.

  2. Recompute the system potential energy: UA=q2VA=(−2.00×10−6 C)(1.3485×105 V)=−0.2697 J≈−0.270 JU_A = q_2 V_A = (-2.00 \times 10^{-6}\text{ C})(1.3485 \times 10^5\text{ V}) = -0.2697\text{ J} \approx -0.270\text{ J}.

  3. Compute potential and potential energy at point BB: VB=(8.99×109)(4.50×10−6)0.800=5.0569×104 VV_B = \frac{(8.99 \times 10^9)(4.50 \times 10^{-6})}{0.800} = 5.0569 \times 10^4\text{ V}, so UB=q2VB=(−2.00×10−6 C)(5.0569×104 V)=−0.1011 JU_B = q_2 V_B = (-2.00 \times 10^{-6}\text{ C})(5.0569 \times 10^4\text{ V}) = -0.1011\text{ J}.

  4. Calculate the field work: Wfield=UA−UB=(−0.2697 J)−(−0.1011 J)=−0.1686 J≈−0.169 JW_{\text{field}} = U_A - U_B = (-0.2697\text{ J}) - (-0.1011\text{ J}) = -0.1686\text{ J} \approx -0.169\text{ J}.

Final answer

(a) VA=+1.35×105 VV_A = +1.35 \times 10^5\text{ V}; (b) U=−0.270 JU = -0.270\text{ J}; (c) Wfield=−0.169 JW_{\text{field}} = -0.169\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the integral definition linking field and potential: V=−∫E drV = -\int E\,dr, noting that integrating r−2r^{-2} gives r−1r^{-1}.

  • Create a 2×22 \times 2 summary grid contrasting Force, Field, Potential Energy, and Potential by vector/scalar and power of rr.

  • Solve follow-up problems calculating potential differences and field work with point charges.

Lock it in

Similar question

01

A point charge q1=−5.00 μCq_1 = -5.00\text{ }\mu\text{C} is fixed at the origin. What is the electric potential VV at a distance of r=0.500 mr = 0.500\text{ m} from q1q_1?

Answer

V=keq1r=(8.99×109 N⋅m2/C2)(−5.00×10−6 C)0.500 m=−8.99×104 VV = \frac{k_e q_1}{r} = \frac{(8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2)(-5.00 \times 10^{-6}\text{ C})}{0.500\text{ m}} = -8.99 \times 10^4\text{ V}.

02

A test charge q2=−1.50 μCq_2 = -1.50\text{ }\mu\text{C} is placed at a point where the electric potential due to external charges is V=−4.00×104 VV = -4.00 \times 10^4\text{ V}. Calculate the electric potential energy UU of this test charge.

Answer

U=q2V=(−1.50×10−6 C)(−4.00×104 V)=+0.0600 JU = q_2 V = (-1.50 \times 10^{-6}\text{ C})(-4.00 \times 10^4\text{ V}) = +0.0600\text{ J}.

03

Two fixed point charges, q1=+3.00 μCq_1 = +3.00\text{ }\mu\text{C} at the origin and q2=−3.00 μCq_2 = -3.00\text{ }\mu\text{C} at x=1.00 mx = 1.00\text{ m}, create an electric field. A third charge q3=−2.00 μCq_3 = -2.00\text{ }\mu\text{C} moves from x=0.250 mx = 0.250\text{ m} to x=0.500 mx = 0.500\text{ m} along the xx-axis. Calculate the work done by the electric field on q3q_3.

Answer
  1. At x=0.250 mx = 0.250\text{ m}: Vi=ke(3.00×10−60.250+−3.00×10−60.750)=8.99×109(12.0×10−6−4.00×10−6)=+7.192×104 VV_i = k_e\left(\frac{3.00 \times 10^{-6}}{0.250} + \frac{-3.00 \times 10^{-6}}{0.750}\right) = 8.99 \times 10^9(12.0 \times 10^{-6} - 4.00 \times 10^{-6}) = +7.192 \times 10^4\text{ V}.
  2. At x=0.500 mx = 0.500\text{ m} (midpoint between equal and opposite charges): Vf=0 VV_f = 0\text{ V}.
  3. Work done by the electric field: Wfield=−q3(Vf−Vi)=−(−2.00×10−6 C)(0−7.192×104 V)=−0.144 JW_{\text{field}} = -q_3(V_f - V_i) = -(-2.00 \times 10^{-6}\text{ C})(0 - 7.192 \times 10^4\text{ V}) = -0.144\text{ J}.
Loading workspace…