Resources

A classical plasma or rarefied neutral gas column supports both transverse electromagnetic radiation and longitudinal acoustic compressional oscillations. Consider a sound wave propagating through a gas where the equilibrium pressure P0P_0 is reduced toward near-vacuum conditions (P0→0 PaP_0 \to 0\text{ Pa}) at constant temperature TT. (a) Compare the physical behavior of a transverse light wave versus a longitudinal acoustic wave as the ambient medium particle number density approaches zero (n→0 m−3n \to 0\text{ m}^{-3}). (b) An acoustic wave has frequency f=2.50 kHzf = 2.50\text{ kHz} in air at T=293 KT = 293\text{ K} (mean molecular speed vˉ=460 m/s\bar{v} = 460\text{ m/s}). The mean free path of gas molecules varies inversely with pressure as ℓ=kBT2πd2P\ell = \frac{k_B T}{\sqrt{2}\pi d^2 P}, where effective molecular collision diameter d=3.70×10−10 md = 3.70\times 10^{-10}\text{ m}. Calculate the critical boundary pressure PcritP_{\text{crit}} below which the molecular mean free path exceeds the acoustic wavelength λ\lambda (speed of sound v=343 m/sv = 343\text{ m/s}), causing the continuum approximation to collapse and completely extinguishing longitudinal sound wave propagation.

Answer and steps

Final answer

(a) Transverse electromagnetic waves require no material medium and propagate with maximum speed c≈3.00×108 m/sc \approx 3.00\times 10^8\text{ m/s} in a perfect vacuum, whereas longitudinal acoustic waves are mechanical and strictly require intermolecular collisions to propagate pressure variations; thus, as n→0 m−3n \to 0\text{ m}^{-3}, the longitudinal wave ceases to exist; (b) Pcrit=0.0487 PaP_{\text{crit}} = 0.0487\text{ Pa}.

Steps

Part (a): Physical Behavior in the Vacuum Limit

  1. Transverse Electromagnetic Waves

    • Nature: Light and other electromagnetic waves consist of oscillating electric and magnetic fields perpendicular to the direction of propagation.
    • Medium Requirement: They are self-propagating and do not require a material medium.
    • Behavior as n→0 m−3n \to 0\text{ m}^{-3}: As the particle number density drops to zero, absorption, scattering, and refractive delay disappear. The transverse wave propagates unhindered at its upper speed limit, the speed of light in vacuum: c≈3.00×108 m/sc \approx 3.00 \times 10^8\text{ m/s}
  2. Longitudinal Acoustic Waves

    • Nature: Sound waves are mechanical oscillations where particle displacements occur parallel to the direction of wave travel, creating alternating regions of compression and rarefaction.
    • Medium Requirement: Mechanical energy is transferred from molecule to molecule via collisions.
    • Behavior as n→0 m−3n \to 0\text{ m}^{-3}: As the density approaches zero, the frequency of intermolecular collisions vanishes. Without collisions to restore pressure equilibria or transmit momentum, the acoustic wave cannot propagate and ceases to exist.

Part (b): Calculation of the Critical Pressure PcritP_{\text{crit}}

  1. Calculate the Acoustic Wavelength λ\lambda Using the wave speed relation v=fλv = f\lambda: λ=vf=343 m/s2.50×103 Hz=0.1372 m\lambda = \frac{v}{f} = \frac{343\text{ m/s}}{2.50 \times 10^3\text{ Hz}} = 0.1372\text{ m}
  2. Set up the Boundary Condition The continuum approximation governing fluid acoustics breaks down when the molecular mean free path ℓ\ell becomes comparable to or exceeds the acoustic wavelength (ℓ≥λ\ell \ge \lambda). At the critical threshold: ℓ=λ\ell = \lambda

    Substitute the given expression for the mean free path: kBT2πd2Pcrit=λ\frac{k_B T}{\sqrt{2}\pi d^2 P_{\text{crit}}} = \lambda

    Solving for PcritP_{\text{crit}}: Pcrit=kBT2πd2λP_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d^2 \lambda}

  3. Substitute the Numerical Values

    • Boltzmann constant: kB≈1.381×10−23 J/Kk_B \approx 1.381 \times 10^{-23}\text{ J/K}
    • Temperature: T=293 KT = 293\text{ K}
    • Collision diameter: d=3.70×10−10 md = 3.70 \times 10^{-10}\text{ m}
    • Wavelength: λ=0.1372 m\lambda = 0.1372\text{ m}

    Evaluating the thermal energy term: kBT=(1.381×10−23 J/K)(293 K)≈4.046×10−21 Jk_B T = (1.381 \times 10^{-23}\text{ J/K})(293\text{ K}) \approx 4.046 \times 10^{-21}\text{ J}

    Evaluating the collision cross-section factor: 2πd2=2π(3.70×10−10 m)2≈6.082×10−19 m2\sqrt{2}\pi d^2 = \sqrt{2}\pi (3.70 \times 10^{-10}\text{ m})^2 \approx 6.082 \times 10^{-19}\text{ m}^2

    Evaluating the denominator: 2πd2λ=(6.082×10−19 m2)(0.1372 m)≈8.345×10−20 m3\sqrt{2}\pi d^2 \lambda = (6.082 \times 10^{-19}\text{ m}^2)(0.1372\text{ m}) \approx 8.345 \times 10^{-20}\text{ m}^3

    Therefore: Pcrit=4.046×10−21 J8.345×10−20 m3≈0.0487 PaP_{\text{crit}} = \frac{4.046 \times 10^{-21}\text{ J}}{8.345 \times 10^{-20}\text{ m}^3} \approx 0.0487\text{ Pa}

Common Pitfall: Do not confuse the collision diameter dd with the cross-sectional area σ=πd2\sigma = \pi d^2. The geometric factor 2\sqrt{2} accounts for the relative motion of colliding molecules and must be retained in the denominator.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the acoustic wave propagation speed v with the mean molecular thermal speed v̄ when calculating the acoustic wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Light is an electromagnetic wave and does not need a medium, so it continues to travel at cc as n→0n \to 0. ⟹\Longrightarrow Sound is a mechanical wave requiring molecular collisions, so its propagation extinguishes as n→0n \to 0.

  2. Step 2

    λ=vˉf=4602500=0.184 m\lambda = \frac{\bar{v}}{f} = \frac{460}{2500} = 0.184\text{ m}

    Correct

    λ=vf=343 m/s2500 Hz=0.1372 m\lambda = \frac{v}{f} = \frac{343\text{ m/s}}{2500\text{ Hz}} = 0.1372\text{ m}

    You substituted the mean molecular thermal speed vˉ=460 m/s\bar{v} = 460\text{ m/s} into the wave equation instead of the macroscopic acoustic wave propagation speed v=343 m/sv = 343\text{ m/s}.

  3. Step 3

    ℓ=λ⟹Pcrit=kBT2πd2λ⟹Pcrit=1.38×10−23×2932π(3.70×10−10)2×0.184\ell = \lambda \Longrightarrow P_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d^2 \lambda} \Longrightarrow P_{\text{crit}} = \frac{1.38 \times 10^{-23} \times 293}{\sqrt{2}\pi (3.70 \times 10^{-10})^2 \times 0.184}

    Correct

    Pcrit=kBT2πd2λ=(1.381×10−23 J/K)(293 K)2π(3.70×10−10 m)2(0.1372 m)P_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d^2 \lambda} = \frac{(1.381 \times 10^{-23}\text{ J/K})(293\text{ K})}{\sqrt{2}\pi (3.70 \times 10^{-10}\text{ m})^2 (0.1372\text{ m})}

    Your algebraic rearrangement and boundary condition ℓ=λ\ell = \lambda are completely correct, but the numerical substitution carries over the incorrect wavelength from Step 2.

  4. Step 4

    Pcrit=0.0361 PaP_{\text{crit}} = 0.0361\text{ Pa}

    Correct

    Pcrit≈0.0487 PaP_{\text{crit}} \approx 0.0487\text{ Pa}

    Your final calculation is numerically consistent with your intermediate value of λ=0.184 m\lambda = 0.184\text{ m}, but it differs from the true value due to the wave speed substitution error.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly explained why light persists while sound extinguishes in vacuum.

You correctly identified the breakdown criterion ℓ=λ\ell = \lambda for acoustic continuum propagation.

You accurately rearranged the mean free path equation to solve for the critical pressure PcritP_{\text{crit}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wave Speed vs. Thermal Particle Speed Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the macroscopic phase speed of the collective acoustic disturbance (vv) with the microscopic random thermal speed of individual gas molecules (vˉ\bar{v}) when applying λ=v/f\lambda = v/f.

REASONING PATH
Your ACEpath teacher’s suggested approach
Acoustic Phase Speed vs. Molecular Thermal Speed
  • Wave relations of the form λ=v/f\lambda = v/f always use the collective wave propagation speed vv, never the microscopic random thermal speed vˉ\bar{v}.

  • Identify the macroscopic wave speed vv explicitly in the problem text before calculating wave parameters like λ\lambda or kk.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the correct acoustic wavelength using the speed of sound: λ=vf=343 m/s2500 Hz=0.1372 m\lambda = \frac{v}{f} = \frac{343\text{ m/s}}{2500\text{ Hz}} = 0.1372\text{ m}.

  2. Substitute λ=0.1372 m\lambda = 0.1372\text{ m} into your critical pressure formula: Pcrit=(1.381×10−23 J/K)(293 K)2π(3.70×10−10 m)2(0.1372 m)P_{\text{crit}} = \frac{(1.381 \times 10^{-23}\text{ J/K})(293\text{ K})}{\sqrt{2}\pi (3.70 \times 10^{-10}\text{ m})^2 (0.1372\text{ m})}.

  3. Evaluate the expression: Pcrit=4.046×10−21 J8.345×10−20 m3≈0.0487 PaP_{\text{crit}} = \frac{4.046 \times 10^{-21}\text{ J}}{8.345 \times 10^{-20}\text{ m}^3} \approx 0.0487\text{ Pa}.

Final answer

Pcrit=0.0487 PaP_{\text{crit}} = 0.0487\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always label different velocities in gas acoustics problems distinctly (e.g., vsoundv_{\text{sound}} for wave speed, vˉ\bar{v} or vrmsv_{\text{rms}} for thermal speeds).

  • Remember that sound waves represent organized collective motion, so their wavelength depends on how fast the disturbance travels, not the individual particle speeds.

OverviewACEpath Teacher's Diagnosis

02 The student omits the factor of √2 in the denominator of the mean free path formula when solving for critical pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Transverse light waves propagate independently of a medium through vacuum. Longitudinal sound waves require particle collisions and cannot propagate in vacuum.\text{Transverse light waves propagate independently of a medium through vacuum. Longitudinal sound waves require particle collisions and cannot propagate in vacuum.}

  2. Step 2

    λ=vf=3432500=0.1372 m\lambda = \frac{v}{f} = \frac{343}{2500} = 0.1372\text{ m}

  3. Step 3

    ℓ=kBTπd2P  ⟹  Pcrit=kBTπd2λ\ell = \frac{k_B T}{\pi d^2 P} \implies P_{\text{crit}} = \frac{k_B T}{\pi d^2 \lambda}

    Correct

    ℓ=kBT2πd2P  ⟹  Pcrit=kBT2πd2λ\ell = \frac{k_B T}{\sqrt{2}\pi d^2 P} \implies P_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d^2 \lambda}

    You left out the geometric factor of 2\sqrt{2} from the denominator of the mean free path formula specified in the problem statement.

  4. Step 4

    Pcrit=1.38×10−23×293π(3.70×10−10)2×0.1372  ⟹  Pcrit=0.0686 PaP_{\text{crit}} = \frac{1.38 \times 10^{-23} \times 293}{\pi (3.70 \times 10^{-10})^2 \times 0.1372} \implies P_{\text{crit}} = 0.0686\text{ Pa}

    Correct

    Pcrit=1.381×10−23×2932π(3.70×10−10)2×0.1372≈0.0487 PaP_{\text{crit}} = \frac{1.381 \times 10^{-23} \times 293}{\sqrt{2}\pi (3.70 \times 10^{-10})^2 \times 0.1372} \approx 0.0487\text{ Pa}

    Your arithmetic followed your stated equation, but because 2\sqrt{2} was omitted in the denominator, the final calculated pressure is larger than the true threshold by a factor of 2\sqrt{2}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly articulated why longitudinal sound waves cannot propagate in a vacuum while transverse electromagnetic waves can.

You accurately calculated the acoustic wavelength from the speed of sound and frequency.

You correctly identified the boundary condition where the mean free path equals the acoustic wavelength.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of geometric factor in formula transcription

You omitted the factor of 2\sqrt{2} in the denominator when copying the mean free path formula ℓ=kBT2πd2P\ell = \frac{k_B T}{\sqrt{2}\pi d^2 P}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely confused the simplified stationary-target mean free path formula ℓ=1nπd2\ell = \frac{1}{n\pi d^2} with the Maxwellian relative-motion formula ℓ=12nπd2\ell = \frac{1}{\sqrt{2}n\pi d^2}, overlooking the explicit factor of 2\sqrt{2} provided in the problem prompt.

REASONING PATH
Your ACEpath teacher’s suggested approach
Formula Verification
  • In kinetic theory, the factor 2\sqrt{2} in ℓ=kBT2πd2P\ell = \frac{k_B T}{\sqrt{2}\pi d^2 P} accounts for the relative motion of colliding particles.

  • Check your transcribed formula against the problem statement before isolating the target variable.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Pcrit=kBT2πd2λP_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d^2 \lambda}

  2. Pcrit=(1.381×10−23 J/K)(293 K)2π(3.70×10−10 m)2(0.1372 m)P_{\text{crit}} = \frac{(1.381 \times 10^{-23}\text{ J/K})(293\text{ K})}{\sqrt{2}\pi (3.70 \times 10^{-10}\text{ m})^2 (0.1372\text{ m})}

  3. Pcrit=4.046×10−21 J8.345×10−20 m3≈0.0487 PaP_{\text{crit}} = \frac{4.046 \times 10^{-21}\text{ J}}{8.345 \times 10^{-20}\text{ m}^3} \approx 0.0487\text{ Pa}

Final answer

(a) Transverse light waves do not require a material medium and propagate through vacuum at c≈3.00×108 m/sc \approx 3.00 \times 10^8\text{ m/s}; longitudinal acoustic waves require particle collisions to transmit mechanical disturbances and extinguish as n→0 m−3n \to 0\text{ m}^{-3}. (b) Pcrit=0.0487 PaP_{\text{crit}} = 0.0487\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always double-check copied formulas against the provided text to ensure no geometric constants (such as 2\sqrt{2} or π\pi) are lost.

  • Remember that the factor 2\sqrt{2} in the mean free path formula accounts for all gas molecules moving simultaneously rather than hitting stationary targets.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the relationship between wave speed, frequency, and wavelength by writing λ = f / v.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Light waves propagate in vacuum because they are electromagnetic oscillations. Acoustic waves disappear because longitudinal compressions need particles to transmit force.

  2. Step 2

    λ=fv=2500343=7.29 m\lambda = \frac{f}{v} = \frac{2500}{343} = 7.29\text{ m}

    Correct

    λ=vf=343 m/s2500 Hz=0.1372 m\lambda = \frac{v}{f} = \frac{343\text{ m/s}}{2500\text{ Hz}} = 0.1372\text{ m}

    You inverted the wave speed formula. Since v=fλv = f\lambda, the wavelength is λ=vf\lambda = \frac{v}{f}, not fv\frac{f}{v}.

  3. Step 3

    ℓ=λ  ⟹  Pcrit=kBT2πd2λ\ell = \lambda \implies P_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d^2 \lambda}

  4. Step 4

    Pcrit=1.38×10−23×2932π(3.70×10−10)2×7.29=9.12×10−4 PaP_{\text{crit}} = \frac{1.38 \times 10^{-23} \times 293}{\sqrt{2}\pi (3.70 \times 10^{-10})^2 \times 7.29} = 9.12 \times 10^{-4}\text{ Pa}

    Correct

    Pcrit=1.381×10−23×2932π(3.70×10−10)2×0.1372≈0.0487 PaP_{\text{crit}} = \frac{1.381 \times 10^{-23} \times 293}{\sqrt{2}\pi (3.70 \times 10^{-10})^2 \times 0.1372} \approx 0.0487\text{ Pa}

    Your algebra and arithmetic were executed properly, but the final value was affected by using λ=7.29 m\lambda = 7.29\text{ m} instead of λ=0.1372 m\lambda = 0.1372\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly articulated why electromagnetic waves propagate in vacuum while longitudinal sound waves require particle collisions.

You correctly set up the breakdown criterion ℓ=λ\ell = \lambda.

You accurately solved for PcritP_{\text{crit}} algebraically and substituted the physical constants correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted wave equation ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the definition of wave speed v=fλv = f\lambda, solving for wavelength as λ=f/v\lambda = f / v rather than λ=v/f\lambda = v / f. Performing a quick dimensional check (Hz/(m/s)=m−1≠m\text{Hz} / (\text{m/s}) = \text{m}^{-1} \neq \text{m}) would have immediately revealed the inversion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Wave Equation Inversion Check
  • v=fλ  ⟺  λ=vfv = f\lambda \iff \lambda = \frac{v}{f} and f=vλf = \frac{v}{\lambda}.

  • Always verify the units before computing: m/ss−1=m\frac{\text{m/s}}{\text{s}^{-1}} = \text{m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the correct wavelength: λ=343 m/s2500 Hz=0.1372 m\lambda = \frac{343\text{ m/s}}{2500\text{ Hz}} = 0.1372\text{ m}.

  2. Substitute λ=0.1372 m\lambda = 0.1372\text{ m} into your critical pressure formula: Pcrit=(1.381×10−23 J/K)(293 K)2π(3.70×10−10 m)2(0.1372 m)P_{\text{crit}} = \frac{(1.381 \times 10^{-23}\text{ J/K})(293\text{ K})}{\sqrt{2}\pi (3.70 \times 10^{-10}\text{ m})^2 (0.1372\text{ m})}.

  3. Evaluate the denominator: 2π(3.70×10−10)2(0.1372)≈8.345×10−20 m3\sqrt{2}\pi (3.70 \times 10^{-10})^2 (0.1372) \approx 8.345 \times 10^{-20}\text{ m}^3.

  4. Divide the numerator by the denominator: Pcrit=4.046×10−21 J8.345×10−20 m3≈0.0487 PaP_{\text{crit}} = \frac{4.046 \times 10^{-21}\text{ J}}{8.345 \times 10^{-20}\text{ m}^3} \approx 0.0487\text{ Pa}.

Final answer

Pcrit≈0.0487 PaP_{\text{crit}} \approx 0.0487\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check algebraic rearrangements of three-variable formulas using dimensional analysis.

  • Redo calculations of wavelength given wave speed and frequency to ensure fluent recall of λ=v/f\lambda = v/f.

Lock it in

Similar question

01

A sound wave of frequency f=1.00 kHzf = 1.00\text{ kHz} propagates through argon gas at T=300 KT = 300\text{ K}, where the speed of sound is v=323 m/sv = 323\text{ m/s} and the mean molecular speed is vˉ=399 m/s\bar{v} = 399\text{ m/s}. Find the acoustic wavelength λ\lambda.

Answer

λ=0.323 m\lambda = 0.323\text{ m}. Using the macroscopic sound speed: λ=vf=323 m/s1000 Hz=0.323 m\lambda = \frac{v}{f} = \frac{323\text{ m/s}}{1000\text{ Hz}} = 0.323\text{ m}.

02

In a helium atmosphere at T=273 KT = 273\text{ K}, the sound speed is v=965 m/sv = 965\text{ m/s} and the mean free path is given by ℓ=kBT2πd2P\ell = \frac{k_B T}{\sqrt{2}\pi d^2 P} with atomic diameter d=2.10×10−10 md = 2.10\times 10^{-10}\text{ m}. Calculate the critical pressure PcritP_{\text{crit}} below which an acoustic wave of frequency f=5.00 kHzf = 5.00\text{ kHz} cannot propagate because ℓ>λ\ell > \lambda.

Answer

Pcrit≈0.0994 PaP_{\text{crit}} \approx 0.0994\text{ Pa}. Key steps: 1) λ=vf=965 m/s5000 Hz=0.193 m\lambda = \frac{v}{f} = \frac{965\text{ m/s}}{5000\text{ Hz}} = 0.193\text{ m}. 2) Set ℓ=λ  ⟹  Pcrit=kBT2πd2λ=(1.381×10−23)(273)2π(2.10×10−10)2(0.193)≈0.0994 Pa\ell = \lambda \implies P_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d^2 \lambda} = \frac{(1.381\times 10^{-23})(273)}{\sqrt{2}\pi (2.10\times 10^{-10})^2 (0.193)} \approx 0.0994\text{ Pa}.

03

Explain why the Knudsen number Kn=ℓ/λ\text{Kn} = \ell / \lambda determines whether a sound wave can propagate in a rarefied gas, and state what occurs physically when Kn≫1\text{Kn} \gg 1.

Answer

Continuum acoustics requires local thermodynamic equilibrium established by frequent collisions within one wavelength ($ \ell \ll \lambda$$, so $$\text{Kn} \ll 1). When $$\text{Kn} \gg 1$, molecules travel across an entire wave cycle without colliding, preventing the transmission of pressure gradients and causing the wave to be heavily damped and extinguished.$$

Loading workspace…