Resources
A precision micro-oscillator in a laboratory test bench consists of a mass attached to an ultra-compliant micro-spring with force constant . The micro-oscillator is displaced by from equilibrium and released from rest. Expressing your intermediate values in standard SI units before converting to final engineering units, calculate (a) the oscillation frequency in hertz (), (b) the maximum acceleration in , and (c) the total mechanical energy in microjoules ().
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Convert Given Quantities to Standard SI Units
To prevent errors in physical equations, convert all parameters to base SI units (, , and ):
- Mass:
- Spring constant:
- Amplitude (): Since the oscillator is released from rest at maximum displacement , the amplitude is:
Oscillation Frequency ()
The angular frequency of a mass-spring system depends on the stiffness and inertia :
The linear frequency represents the number of complete cycles per second:
Maximum Acceleration ()
In simple harmonic motion, maximum acceleration occurs at the turning points (where displacement is at its maximum, ):
Using SI units:
Converting to as requested:
(Alternative check using Hooke's Law: .)
Total Mechanical Energy ()
The total mechanical energy in a simple harmonic oscillator is conserved and equals the maximum elastic potential energy stored at full displacement:
Substituting the values:
Converting to microjoules ():
Typical errors
01 The student confuses linear frequency f with angular frequency ω, failing to divide by 2π to find f in hertz.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
,
CorrectThe formula calculates the angular frequency in radians per second (), not the linear frequency . To find in hertz (), you must divide by .
- Step 2
,
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou converted milligrams and millimeters to standard base SI units accurately.
You evaluated the ratio correctly without arithmetic slips.
You correctly used to obtain and converted it to the required engineering units.
You calculated the total mechanical energy accurately using .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the expression as linear frequency rather than angular frequency , omitting the conversion factor of between radians and complete oscillation cycles.
REASONING PATH
Your ACEpath teacher’s suggested approach- Distinguish $\omega$ from $f$
For any harmonic oscillator, has units of , while has units of cycles per second or .
Whenever you compute , label it as , and divide by to obtain the ordinary frequency .
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute the angular frequency: .
Convert angular frequency to linear frequency: .
(a) ; (b) ; (c)
02 The student misremembers the relationship for maximum simple harmonic acceleration as a_max = ω A rather than a_max = ω² A, confusing maximum acceleration with maximum velocity.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You used , which represents the maximum velocity () rather than the maximum acceleration. Taking the second time derivative of displacement yields , so the maximum acceleration is .
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou accurately converted all laboratory units (milligrams and millimeters) into base SI units.
You correctly determined the angular frequency and linear frequency .
You applied the conservation of mechanical energy properly to find in microjoules.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the formula for peak velocity in simple harmonic motion () with the formula for peak acceleration (). Each time derivative introduces an additional factor of .
REASONING PATH
Your ACEpath teacher’s suggested approach- Kinematic Peak Amplitudes in SHM
For displacement , velocity is () and acceleration is ().
Check dimensions before evaluating: (speed), while (acceleration).
- Alternative Force Check (Newton's Second Law)
At maximum displacement , the restoring force is maximum: .
Cross-check using to ensure consistency with without relying solely on memory.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecall that acceleration is the second derivative of displacement: .
Substitute and : .
Convert to : .
(a) ; (b) ; (c)
03 The student forgets to square the amplitude in the potential energy formula, writing E = (1/2) k A instead of E = (1/2) k A².
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
,
- Step 2
- Step 3Correct
You omitted the square on amplitude . The elastic potential energy stored at maximum displacement is , not . Dimensional analysis confirms this: (force), whereas energy requires .
WHAT YOU DID WELL
Compliments from Your TeacherYou converted milligram and millimeter values into base SI units with complete accuracy.
You correctly related angular frequency to linear frequency .
You accurately determined the maximum acceleration at the turning point.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou recalled the spring potential energy expression with linear displacement instead of quadratic displacement, confusing the average restoring force with the total stored energy .
REASONING PATH
Your ACEpath teacher’s suggested approach- Energy Formula Structure
Elastic potential energy is derived from the integral of Hooke's law: .
Always square the displacement or amplitude term when writing spring potential energy.
- Dimensional Verification
(force), while (energy).
Check the units of your formula before calculating to ensure the product yields joules.
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the total mechanical energy formula for simple harmonic motion: .
Substitute and : .
Evaluate the arithmetic: .
Convert to microjoules: .
Lock it in
What is the relationship between angular frequency and linear frequency ?
or . One complete cycle equals radians.
Similar question
A mass-spring oscillator has a mass and a spring constant . Calculate its oscillation frequency in hertz.
Answer
. First find . Then divide by : .
A micro-cantilever sensor oscillates with an effective mass and spring stiffness . If the amplitude is , determine (a) the frequency in and (b) the maximum acceleration in .
Answer
(a) ; (b) . Steps: . Then . For acceleration, .
A nanoscale oscillator is measured to complete full cycles per second (). The effective spring constant is . Find the effective mass of the oscillator in nanograms ().
Answer
. Steps: . Since , . In nanograms (): .