Resources

Consider an ideal tightly-wound cylindrical solenoid of length L=50.0 cmL = 50.0\text{ cm}, radius R=2.50 cmR = 2.50\text{ cm}, and N=1000 turnsN = 1000\text{ turns} carrying current I=4.00 AI = 4.00\text{ A}. A student asserts two common misconceptions: first, that magnetic field lines originate on positive magnetic charges at one end and terminate on negative ones at the other; second, that the total magnetic flux through any closed Gaussian surface enclosing only the north end of the solenoid is non-zero. (a) Evaluate Gauss's Law for Magnetism, ∮B⃗⋅dA⃗\oint \vec{B}\cdot d\vec{A}, for a closed cylinder enclosing the north face of the solenoid, and explain what this reveals about the continuity and topology of magnetic field lines. (b) Calculate the uniform internal field magnitude BinB_{\text{in}} far from the ends. (c) If a cross-sectional disk S1S_1 inside the solenoid has flux Φ1=BinπR2\Phi_1 = B_{\text{in}}\pi R^2, calculate the exact total flux of the returning field lines spreading throughout the entire exterior space across an infinite planar surface S2S_2 perpendicular to the axis outside the solenoid.

Answer and steps

Final answer

(a) ∮B⃗⋅dA⃗=0 Wb\oint \vec{B}\cdot d\vec{A} = 0\text{ Wb}; magnetic field lines have no sources or sinks, form continuous unbroken closed loops, and reflect the non-existence of isolated magnetic monopoles; (b) Bin=1.01×10−2 TB_{\text{in}} = 1.01\times 10^{-2}\text{ T}; (c) Φext=−1.97×10−5 Wb\Phi_{\text{ext}} = -1.97\times 10^{-5}\text{ Wb} (identically equal in magnitude and opposite in sign to Φ1\Phi_1, ensuring net flux across any transverse plane is zero).

Steps

Part (a): Gauss's Law for Magnetism and Field Line Topology

Gauss's Law for Magnetism states that the net magnetic flux through any closed Gaussian surface SS is identically zero: ∮SB⃗⋅dA⃗=0 Wb\oint_S \vec{B}\cdot d\vec{A} = 0\text{ Wb}

Even when the closed surface is chosen to enclose only the "north" end of the solenoid, this law strictly holds. Every magnetic field line that exits the interior of the solenoid through the north pole spreads outward into the surrounding space, loops around the exterior, and enters back through the closed surface (or re-enters through the south pole to continue internally).

  • Physical Implication: Unlike electrostatic field lines—which originate on positive electric charges and terminate on negative electric charges—magnetic field lines have neither sources (points of divergence) nor sinks (points of convergence). There are no isolated magnetic monopoles.
  • Topological Consequence: Magnetic field lines must form continuous, unbroken closed loops. The concept of "magnetic charge" is physically invalid in classical electromagnetism.

Part (b): Internal Magnetic Field Calculation

For an ideal tightly-wound solenoid, the turn density nn (number of turns per unit length) is given by: n=NL=1000 turns0.500 m=2000 m−1n = \frac{N}{L} = \frac{1000\text{ turns}}{0.500\text{ m}} = 2000\text{ m}^{-1}

Far from the ends, the magnetic field inside the solenoid is nearly uniform and directed along the axis: Bin=μ0nIB_{\text{in}} = \mu_0 n I

Using the permeability of free space μ0=4π×10−7 T⋅m/A\mu_0 = 4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}: Bin=(4π×10−7 T⋅m/A)⋅(2000 m−1)⋅(4.00 A)B_{\text{in}} = (4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}) \cdot (2000\text{ m}^{-1}) \cdot (4.00\text{ A}) Bin=3.2π×10−3 T≈1.01×10−2 TB_{\text{in}} = 3.2\pi \times 10^{-3}\text{ T} \approx 1.01 \times 10^{-2}\text{ T}


Part (c): Return Magnetic Flux Through Exterior Space

The cross-sectional area of the cylindrical core is: A=πR2=π(0.0250 m)2≈1.963×10−3 m2A = \pi R^2 = \pi (0.0250\text{ m})^2 \approx 1.963 \times 10^{-3}\text{ m}^2

The magnetic flux directed forward (along the +z+z axis) through the cross-sectional disk S1S_1 inside the solenoid is: Φ1=BinπR2=(1.0053×10−2 T)⋅(1.9635×10−3 m2)≈1.97×10−5 Wb\Phi_1 = B_{\text{in}}\pi R^2 = (1.0053 \times 10^{-2}\text{ T}) \cdot (1.9635 \times 10^{-3}\text{ m}^2) \approx 1.97 \times 10^{-5}\text{ Wb}

Consider an infinite plane perpendicular to the solenoid's axis. Because magnetic field lines are continuous closed loops and cannot terminate: Φtotal=Φint+Φext=0\Phi_{\text{total}} = \Phi_{\text{int}} + \Phi_{\text{ext}} = 0

All field lines passing through the solenoid's interior cross section must return in the opposite direction through the exterior region outside the solenoid (r>Rr > R). Choosing the positive direction along the internal field lines: Φext=−Φ1=−1.97×10−5 Wb\Phi_{\text{ext}} = -\Phi_1 = -1.97 \times 10^{-5}\text{ Wb}

A common pitfall is assuming that because the exterior magnetic field BextB_{\text{ext}} of an ideal long solenoid is exceedingly weak at any single point, the exterior flux is zero. While Bext→0B_{\text{ext}} \to 0, the integration area is infinite, and the integrated exterior flux is identically equal in magnitude and opposite in sign to the interior flux.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student misuses total turns N instead of turns per unit length n = N / L when calculating the solenoid magnetic field.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ∮B⃗⋅dA⃗=0 Wb  ⟹  \oint \vec{B}\cdot d\vec{A} = 0\text{ Wb} \implies There are no magnetic monopoles, so magnetic field lines form continuous closed loops without start or end points.

  2. Step 2

    Bin=μ0NI=(4π×10−7)×1000×4.00=5.03×10−3 TB_{\text{in}} = \mu_0 N I = (4\pi \times 10^{-7}) \times 1000 \times 4.00 = 5.03 \times 10^{-3}\text{ T}

    Correct

    Bin=μ0nI=μ0(NL)I=(4π×10−7)×(10000.500)×4.00≈1.01×10−2 TB_{\text{in}} = \mu_0 n I = \mu_0 \left(\frac{N}{L}\right) I = (4\pi \times 10^{-7}) \times \left(\frac{1000}{0.500}\right) \times 4.00 \approx 1.01 \times 10^{-2}\text{ T}

    You used the total turn count N=1000N = 1000 rather than the linear turn density n=NL=10000.500 m=2000 m−1n = \frac{N}{L} = \frac{1000}{0.500\text{ m}} = 2000\text{ m}^{-1}.

  3. Step 3

    Φreturn=−BinπR2=−(5.03×10−3 T)×π×(0.0250 m)2=−9.88×10−6 Wb\Phi_{\text{return}} = -B_{\text{in}}\pi R^2 = -(5.03 \times 10^{-3}\text{ T}) \times \pi \times (0.0250\text{ m})^2 = -9.88 \times 10^{-6}\text{ Wb}

    Correct

    Φreturn=−BinπR2=−(1.005×10−2 T)×π×(0.0250 m)2≈−1.97×10−5 Wb\Phi_{\text{return}} = -B_{\text{in}}\pi R^2 = -(1.005 \times 10^{-2}\text{ T}) \times \pi \times (0.0250\text{ m})^2 \approx -1.97 \times 10^{-5}\text{ Wb}

    Your physical reasoning that the total returning flux must exactly balance the internal flux is completely sound, but your calculation inherited the incorrect field value from step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated that the net magnetic flux through any closed surface is zero.

You clearly explained that magnetic field lines form continuous closed loops because isolated magnetic monopoles do not exist.

You correctly recognized that the total return flux outside the solenoid must be equal in magnitude and opposite in sign to the interior flux.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Turn Density Misuse ($N$ vs. $n$)

You wrote B=μ0NIB = \mu_0 N I instead of B=μ0nI=μ0(NL)IB = \mu_0 n I = \mu_0 \left(\frac{N}{L}\right) I.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the total number of turns NN (a dimensionless count) with the turns per unit length nn (units of m−1\text{m}^{-1}) in Ampère's Law for an ideal solenoid.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Units of Solenoid Turn Density
  • The magnetic field formula for an ideal solenoid is B=μ0nIB = \mu_0 n I, where n=NLn = \frac{N}{L} has units of turns/m\text{turns/m}.

  • Always divide the total turn count NN by the solenoid's length LL in meters before multiplying by μ0I\mu_0 I.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the turn density: n=NL=10000.500 m=2000 m−1n = \frac{N}{L} = \frac{1000}{0.500\text{ m}} = 2000\text{ m}^{-1}.

  2. Compute the uniform interior field: Bin=μ0nI=(4π×10−7 T⋅m/A)×(2000 m−1)×(4.00 A)≈1.01×10−2 TB_{\text{in}} = \mu_0 n I = (4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}) \times (2000\text{ m}^{-1}) \times (4.00\text{ A}) \approx 1.01 \times 10^{-2}\text{ T}.

  3. Evaluate the return exterior flux: Φext=−BinπR2=−(1.0053×10−2 T)×π(0.0250 m)2≈−1.97×10−5 Wb\Phi_{\text{ext}} = -B_{\text{in}}\pi R^2 = -(1.0053 \times 10^{-2}\text{ T}) \times \pi (0.0250\text{ m})^2 \approx -1.97 \times 10^{-5}\text{ Wb}.

Final answer

(a) ∮B⃗⋅dA⃗=0 Wb\oint \vec{B}\cdot d\vec{A} = 0\text{ Wb}; field lines form continuous closed loops without sources or sinks; (b) Bin≈1.01×10−2 TB_{\text{in}} \approx 1.01 \times 10^{-2}\text{ T}; (c) Φext≈−1.97×10−5 Wb\Phi_{\text{ext}} \approx -1.97 \times 10^{-5}\text{ Wb}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check unit dimensions whenever applying B=μ0nIB = \mu_0 n I to ensure nn carries units of m−1\text{m}^{-1}.

  • Keep practicing problems where solenoids of varying lengths and turn counts are compared.

OverviewACEpath Teacher's Diagnosis

02 A student incorrectly believes an ideal solenoid has zero exterior field everywhere and concludes the exterior return flux is zero.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ∮B⋅dA=0 Wb\oint B \cdot dA = 0\text{ Wb} ⟹ Magnetic monopoles do not exist, so magnetic field lines form closed continuous loops.

  2. Step 2

    n=NL=10000.500 m=2000 turns/mn = \frac{N}{L} = \frac{1000}{0.500\text{ m}} = 2000\text{ turns/m} ⟹ Bin=μ0nI=(4π×10−7)×2000×4.00=1.01×10−2 TB_{\text{in}} = \mu_0 n I = (4\pi \times 10^{-7}) \times 2000 \times 4.00 = 1.01 \times 10^{-2}\text{ T}

  3. Step 3

    Outside an ideal solenoid, Bout=0B_{\text{out}} = 0 ⟹ Φreturn=∫Bout⋅dA=0 Wb\Phi_{\text{return}} = \int B_{\text{out}} \cdot dA = 0\text{ Wb}

    Correct

    Φext=−Φ1=−BinπR2=−(1.0053×10−2 T)⋅π(0.0250 m)2≈−1.97×10−5 Wb\Phi_{\text{ext}} = -\Phi_1 = -B_{\text{in}}\pi R^2 = -(1.0053\times 10^{-2}\text{ T})\cdot \pi (0.0250\text{ m})^2 \approx -1.97\times 10^{-5}\text{ Wb}

    Although the exterior field of an infinitely long solenoid is zero in the limit of a localized point, magnetic field lines cannot terminate. Every field line passing through the core must loop back through the infinite exterior region, making the total integrated return flux across an infinite transverse plane equal in magnitude and opposite in sign to the interior flux.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated Gauss's Law for Magnetism as ∮B⃗⋅dA⃗=0 Wb\oint \vec{B}\cdot d\vec{A} = 0\text{ Wb}.

You correctly linked the vanishing divergence of magnetic fields to the absence of magnetic monopoles and the closed-loop nature of field lines.

You correctly computed the linear turn density and the magnitude of the internal magnetic field BinB_{\text{in}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Vanishing Return Flux Fallacy

You treated the ideal solenoid approximation Bout≈0B_{\text{out}} \approx 0 as implying zero total flux, forgetting that an infinite integration area can yield a non-zero integrated flux from an infinitesimally weak field.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a locally vanishing field limit (Bext→0B_{\text{ext}} \to 0) with zero global integrated flux across an infinite domain, which violates the topological requirement that every field line passing through the core must return through the exterior.

REASONING PATH
Your ACEpath teacher’s suggested approach
Flux Conservation Across Any Complete Transverse Plane
  • Because magnetic field lines form closed loops with no endpoints, the net flux through any complete infinite plane perpendicular to the axis is identically zero: Φtotal=Φint+Φext=0\Phi_{\text{total}} = \Phi_{\text{int}} + \Phi_{\text{ext}} = 0.

  • Always set the exterior return flux equal to −Φint-\Phi_{\text{int}} rather than calculating it from a zero-field approximation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the interior cross-sectional area: A=πR2=π(0.0250 m)2≈1.9635×10−3 m2A = \pi R^2 = \pi (0.0250\text{ m})^2 \approx 1.9635\times 10^{-3}\text{ m}^2.

  2. Find the forward internal flux through disk S1S_1: Φ1=BinA=(1.0053×10−2 T)(1.9635×10−3 m2)≈1.97×10−5 Wb\Phi_1 = B_{\text{in}} A = (1.0053\times 10^{-2}\text{ T})(1.9635\times 10^{-3}\text{ m}^2) \approx 1.97\times 10^{-5}\text{ Wb}.

  3. Apply the continuity of closed magnetic flux lines across an entire infinite plane: Φtotal=Φ1+Φext=0\Phi_{\text{total}} = \Phi_1 + \Phi_{\text{ext}} = 0.

  4. Solve for the returning exterior flux: Φext=−Φ1=−1.97×10−5 Wb\Phi_{\text{ext}} = -\Phi_1 = -1.97\times 10^{-5}\text{ Wb}.

Final answer

Φext=−1.97×10−5 Wb\Phi_{\text{ext}} = -1.97\times 10^{-5}\text{ Wb}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how Gauss's Law for Magnetism enforces magnetic flux conservation across any partition of a closed surface or complete transverse plane.

  • Practice computing returning magnetic flux for finite and ideal magnetic dipoles and solenoids over unbounded exterior areas.

OverviewACEpath Teacher's Diagnosis

03 A student treats the north pole of a solenoid like an electric charge and assumes the surface integral yields a non-zero magnetic charge analogous to Gauss's law for electrostatics.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ∮B⃗⋅dA⃗=μ0qm≠0\oint \vec{B}\cdot d\vec{A} = \mu_0 q_m \neq 0 ⟹ Magnetic field lines diverge outward from the north pole like positive electric charges and terminate at infinity.

    Correct

    ∮B⃗⋅dA⃗=0 Wb\oint \vec{B}\cdot d\vec{A} = 0\text{ Wb}. Magnetic monopoles do not exist, so magnetic field lines have neither sources nor sinks and must form continuous, unbroken closed loops.

    You applied an electric-charge analogy to magnetism. By Gauss's Law for Magnetism, the net magnetic flux through any closed Gaussian surface is identically zero because isolated magnetic charges (monopoles) do not exist.

  2. Step 2

    n=NL=10000.500 m=2000 turns/m  ⟹  Bin=μ0nI=(4π×10−7)×2000×4.00=1.01×10−2 Tn = \frac{N}{L} = \frac{1000}{0.500\text{ m}} = 2000\text{ turns/m} \implies B_{\text{in}} = \mu_0 n I = (4\pi \times 10^{-7}) \times 2000 \times 4.00 = 1.01 \times 10^{-2}\text{ T}

  3. Step 3

    Φ1=BinπR2=(1.01×10−2 T)×π×(0.0250 m)2=1.98×10−5 Wb\Phi_1 = B_{\text{in}}\pi R^2 = (1.01 \times 10^{-2}\text{ T}) \times \pi \times (0.0250\text{ m})^2 = 1.98 \times 10^{-5}\text{ Wb} ⟹ Since field lines originate at the pole and do not return inside, the returning flux is −1.98×10−5 Wb-1.98 \times 10^{-5}\text{ Wb}

    Correct

    Φ1≈1.97×10−5 Wb  ⟹  Φext=−Φ1=−1.97×10−5 Wb\Phi_1 \approx 1.97 \times 10^{-5}\text{ Wb} \implies \Phi_{\text{ext}} = -\Phi_1 = -1.97 \times 10^{-5}\text{ Wb} because all field lines forming closed loops must return through the exterior space across the infinite plane.

    You calculated the numerical value correctly, but your written justification contradicts physics. The returning flux is equal and opposite precisely because field lines do form closed loops and return through the exterior space.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the turn density of the solenoid from its length and total turns.

You used the correct formula and magnetic constant to find the internal magnetic field magnitude.

You accurately computed the cross-sectional area and the internal magnetic flux.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Magnetic Monopole Analogy Fallacy

You used a rounded intermediate value of 1.01×10−2 T1.01 \times 10^{-2}\text{ T} which led to 1.98×10−5 Wb1.98 \times 10^{-5}\text{ Wb} instead of 1.97×10−5 Wb1.97 \times 10^{-5}\text{ Wb}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated electrostatics with magnetostatics, assuming a magnetic pole behaves like an isolated point charge with diverging, open field lines rather than continuous closed loops governed by ∮B⃗⋅dA⃗=0\oint \vec{B}\cdot d\vec{A} = 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Gauss's Law for Magnetism
  • The net magnetic flux through any closed surface is always zero: ∮SB⃗⋅dA⃗=0\oint_S \vec{B}\cdot d\vec{A} = 0.

  • Never set the surface integral of a magnetic field equal to an enclosed magnetic charge.

Topology of Magnetic Field Lines
  • Magnetic field lines never begin or end; they always form continuous closed loops.

  • Trace field lines exiting the north face around the exterior back into the south face and through the core.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Gauss's Law for Magnetism: ∮B⃗⋅dA⃗=0 Wb\oint \vec{B}\cdot d\vec{A} = 0\text{ Wb} for any closed surface, including one surrounding the solenoid's north face.

  2. Conclude that magnetic field lines have zero divergence everywhere (no magnetic monopoles), meaning every line exiting the north end must loop around and re-enter.

  3. Use the continuity of closed loops across an infinite transverse plane: Φtotal=Φint+Φext=0\Phi_{\text{total}} = \Phi_{\text{int}} + \Phi_{\text{ext}} = 0, giving Φext=−Φ1=−1.97×10−5 Wb\Phi_{\text{ext}} = -\Phi_1 = -1.97 \times 10^{-5}\text{ Wb}.

Final answer

(a) ∮B⃗⋅dA⃗=0 Wb\oint \vec{B}\cdot d\vec{A} = 0\text{ Wb}; field lines form continuous closed loops; (b) Bin=1.01×10−2 TB_{\text{in}} = 1.01 \times 10^{-2}\text{ T}; (c) Φext=−1.97×10−5 Wb\Phi_{\text{ext}} = -1.97 \times 10^{-5}\text{ Wb}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review Maxwell's equations, specifically comparing Gauss's Law for electric fields with Gauss's Law for magnetic fields.

  • Practice sketching complete magnetic field lines for permanent bar magnets and solenoids, ensuring every line forms a complete loop.

Lock it in

Similar question

01

A compact solenoid has length L=25.0 cmL = 25.0\text{ cm}, total turns N=400N = 400, and carries a current I=2.50 AI = 2.50\text{ A}. Calculate the magnetic field magnitude BB inside the solenoid far from its ends.

Answer

n=NL=4000.250 m=1600 m−1n = \frac{N}{L} = \frac{400}{0.250\text{ m}} = 1600\text{ m}^{-1}. Thus, B=μ0nI=(4π×10−7 T⋅m/A)(1600 m−1)(2.50 A)≈5.03×10−3 TB = \mu_0 n I = (4\pi \times 10^{-7}\text{ T}\cdot\text{m/A})(1600\text{ m}^{-1})(2.50\text{ A}) \approx 5.03 \times 10^{-3}\text{ T}.

02

Two solenoids AA and BB carry the same current. Solenoid AA has N=600N = 600 turns and length L=30 cmL = 30\text{ cm}. Solenoid BB has N=800N = 800 turns and length L=50 cmL = 50\text{ cm}. Which solenoid has a stronger internal magnetic field, and what is the ratio BA/BBB_A / B_B?

Answer

Calculate turn densities: nA=6000.30 m=2000 m−1n_A = \frac{600}{0.30\text{ m}} = 2000\text{ m}^{-1} and nB=8000.50 m=1600 m−1n_B = \frac{800}{0.50\text{ m}} = 1600\text{ m}^{-1}. Solenoid AA is stronger because nA>nBn_A > n_B. The ratio is BABB=nAnB=20001600=1.25\frac{B_A}{B_B} = \frac{n_A}{n_B} = \frac{2000}{1600} = 1.25.

03

A solenoid of radius R=3.0 cmR = 3.0\text{ cm}, length L=40.0 cmL = 40.0\text{ cm}, and N=1200 turnsN = 1200\text{ turns} carries current I=1.50 AI = 1.50\text{ A}. (a) Find the internal magnetic field BinB_{\text{in}}. (b) Determine the exact magnetic flux returning through the entire region outside the solenoid across an infinite transverse plane.

Answer

(a) n=12000.400 m=3000 m−1n = \frac{1200}{0.400\text{ m}} = 3000\text{ m}^{-1}. Bin=μ0nI=(4π×10−7)(3000)(1.50)≈5.65×10−3 TB_{\text{in}} = \mu_0 n I = (4\pi \times 10^{-7})(3000)(1.50) \approx 5.65 \times 10^{-3}\text{ T}. (b) The internal flux is Φin=BinπR2=(5.655×10−3 T)π(0.030 m)2≈1.60×10−5 Wb\Phi_{\text{in}} = B_{\text{in}}\pi R^2 = (5.655 \times 10^{-3}\text{ T})\pi (0.030\text{ m})^2 \approx 1.60 \times 10^{-5}\text{ Wb}. By Gauss's Law, all field lines return externally, so Φext=−Φin≈−1.60×10−5 Wb\Phi_{\text{ext}} = -\Phi_{\text{in}} \approx -1.60 \times 10^{-5}\text{ Wb}.

Loading workspace…