Resources

An engineering student connects two capacitors, C1=3.00  μFC_1 = 3.00\;\mu\text{F} and C2=6.00  μFC_2 = 6.00\;\mu\text{F}, in series across a fixed 18.0 V18.0\text{ V} battery. Rather than determining the standard equivalent capacitance, determine the ratio of the potential difference across capacitor C1C_1 to the potential difference across capacitor C2C_2 (that is, V1/V2V_1 / V_2), as well as the fraction of the total electrostatic potential energy of the combination that is stored specifically in C1C_1.

Answer and steps

Final answer

V1V2=2.00\frac{V_1}{V_2} = 2.00, U1Utotal=23≈0.667\frac{U_1}{U_{\text{total}}} = \frac{2}{3} \approx 0.667

Steps

01

Fundamental Rule for Series Capacitors

When capacitors are connected in series across a voltage source, the same magnitude of charge QQ is stored on each capacitor: Q1=Q2=QQ_1 = Q_2 = Q

The relationship between charge, capacitance, and potential difference across any capacitor is: V=QCV = \frac{Q}{C}


02

Finding the Ratio of Potential Differences (V1/V2V_1 / V_2)

Expressing the voltage across each capacitor in terms of the common charge QQ: V1=QC1andV2=QC2V_1 = \frac{Q}{C_1} \quad \text{and} \quad V_2 = \frac{Q}{C_2}

Taking the ratio of V1V_1 to V2V_2: V1V2=Q/C1Q/C2=C2C1\frac{V_1}{V_2} = \frac{Q/C_1}{Q/C_2} = \frac{C_2}{C_1}

Substitute the given capacitance values (C1=3.00 μFC_1 = 3.00\text{ }\mu\text{F} and C2=6.00 μFC_2 = 6.00\text{ }\mu\text{F}): V1V2=6.00 μF3.00 μF=2.00\frac{V_1}{V_2} = \frac{6.00\text{ }\mu\text{F}}{3.00\text{ }\mu\text{F}} = 2.00

Key Takeaway: In a series circuit, voltage divides inversely proportional to capacitance. The smaller capacitor drops the larger voltage.


03

Finding the Fraction of Total Potential Energy Stored in C1C_1

The electrostatic potential energy UU stored in a capacitor with charge QQ and capacitance CC is given by: U=Q22CU = \frac{Q^2}{2C}

Because both capacitors carry the identical charge QQ, the energy stored in each is inversely proportional to its capacitance: U1=Q22C1andU2=Q22C2U_1 = \frac{Q^2}{2C_1} \quad \text{and} \quad U_2 = \frac{Q^2}{2C_2}

The total energy stored in the series combination is the sum of the energies in both capacitors: Utotal=U1+U2=Q22C1+Q22C2=Q22(1C1+1C2)U_{\text{total}} = U_1 + U_2 = \frac{Q^2}{2C_1} + \frac{Q^2}{2C_2} = \frac{Q^2}{2}\left(\frac{1}{C_1} + \frac{1}{C_2}\right)

Now, form the ratio of U1U_1 to UtotalU_{\text{total}}: U1Utotal=Q22C1Q22(1C1+1C2)=1C11C1+1C2=C2C1+C2\frac{U_1}{U_{\text{total}}} = \frac{\frac{Q^2}{2C_1}}{\frac{Q^2}{2}\left(\frac{1}{C_1} + \frac{1}{C_2}\right)} = \frac{\frac{1}{C_1}}{\frac{1}{C_1} + \frac{1}{C_2}} = \frac{C_2}{C_1 + C_2}

Substitute the numerical values: U1Utotal=6.00 μF3.00 μF+6.00 μF=6.009.00=23≈0.667\frac{U_1}{U_{\text{total}}} = \frac{6.00\text{ }\mu\text{F}}{3.00\text{ }\mu\text{F} + 6.00\text{ }\mu\text{F}} = \frac{6.00}{9.00} = \frac{2}{3} \approx 0.667

(Pitfall to avoid: Do not use U=12CV2U = \frac{1}{2}CV^2 by assuming each capacitor receives the full battery voltage of 18.0 V18.0\text{ V}. In series, the total battery voltage is shared such that V1+V2=18.0 VV_1 + V_2 = 18.0\text{ V}, yielding V1=12.0 VV_1 = 12.0\text{ V} and V2=6.0 VV_2 = 6.0\text{ V}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes potential difference is directly proportional to capacitance rather than inversely proportional, setting V₁/V₂ equal to C₁/C₂.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=CQ  ⟹  V1V2=C1C2  ⟹  V1V2=3.00  μF6.00  μF=0.500V = \frac{C}{Q} \implies \frac{V_1}{V_2} = \frac{C_1}{C_2} \implies \frac{V_1}{V_2} = \frac{3.00\;\mu\text{F}}{6.00\;\mu\text{F}} = 0.500

    Correct

    V=QC  ⟹  V1V2=Q/C1Q/C2=C2C1=6.00  μF3.00  μF=2.00V = \frac{Q}{C} \implies \frac{V_1}{V_2} = \frac{Q/C_1}{Q/C_2} = \frac{C_2}{C_1} = \frac{6.00\;\mu\text{F}}{3.00\;\mu\text{F}} = 2.00

    You inverted the fundamental relation between charge, capacitance, and potential difference. Since Q=CVQ = CV, solving for potential difference gives V=Q/CV = Q / C, not C/QC / Q. Because series capacitors carry the same charge QQ, potential difference is inversely proportional to capacitance, making V1/V2=C2/C1V_1 / V_2 = C_2 / C_1.

  2. Step 2

    1Ceq=13.00+16.00=36.00=12.00  μF  ⟹  Ceq=2.00  μF  ⟹  Q=2.00  μF×18.0  V=36.0  μC\frac{1}{C_{\text{eq}}} = \frac{1}{3.00} + \frac{1}{6.00} = \frac{3}{6.00} = \frac{1}{2.00\;\mu\text{F}} \implies C_{\text{eq}} = 2.00\;\mu\text{F} \implies Q = 2.00\;\mu\text{F} \times 18.0\;\text{V} = 36.0\;\mu\text{C}

  3. Step 3

    Utotal=12CeqV2=324  μJ  ⟹  U1=Q22C1=(36.0  μC)22×3.00  μF=216  μJ  ⟹  U1Utotal=216  μJ324  μJ=23U_{\text{total}} = \frac{1}{2} C_{\text{eq}} V^2 = 324\;\mu\text{J} \implies U_1 = \frac{Q^2}{2C_1} = \frac{(36.0\;\mu\text{C})^2}{2 \times 3.00\;\mu\text{F}} = 216\;\mu\text{J} \implies \frac{U_1}{U_{\text{total}}} = \frac{216\;\mu\text{J}}{324\;\mu\text{J}} = \frac{2}{3}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly combined series capacitors using reciprocal addition.

You accurately found the total charge and the individual energy stored using U=Q2/(2C)U = Q^2 / (2C).

You correctly calculated the fraction of total potential energy stored in C1C_1 as 2/32/3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Inversion Error

You accidentally wrote the capacitance formula as V=C/QV = C / Q instead of V=Q/CV = Q / C.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated voltage as directly proportional to capacitance for series elements rather than recognizing that constant charge enforces an inverse proportionality: V=Q/CV = Q/C.

REASONING PATH
Your ACEpath teacher’s suggested approach
Capacitor Definition Triangle
  • Q=CV  ⟺  V=QC  ⟺  C=QVQ = CV \iff V = \frac{Q}{C} \iff C = \frac{Q}{V}

  • Always isolate voltage by dividing charge by capacitance, never capacitance by charge.

Series Voltage Division
  • In series, QQ is constant, so V∝1CV \propto \frac{1}{C}. Therefore, V1V2=C2C1\frac{V_1}{V_2} = \frac{C_2}{C_1}.

  • Remember that smaller capacitors drop larger voltages when connected in series.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the fundamental definition of capacitance: Q=CV  ⟹  V=QCQ = CV \implies V = \frac{Q}{C}.

  2. For capacitors in series, each capacitor carries identical charge Q1=Q2=QQ_1 = Q_2 = Q.

  3. Set up the voltage ratio: V1V2=Q/C1Q/C2=C2C1\frac{V_1}{V_2} = \frac{Q / C_1}{Q / C_2} = \frac{C_2}{C_1}.

  4. Substitute the given values: V1V2=6.00  μF3.00  μF=2.00\frac{V_1}{V_2} = \frac{6.00\;\mu\text{F}}{3.00\;\mu\text{F}} = 2.00.

Final answer

V1V2=2.00\frac{V_1}{V_2} = 2.00, U1Utotal=23\frac{U_1}{U_{\text{total}}} = \frac{2}{3}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the basic relation Q=CVQ = CV and practice rearranging it for VV and CC.

  • Verify limiting behavior: a smaller capacitor requires a larger electric field and potential difference to hold the exact same charge.

OverviewACEpath Teacher's Diagnosis

02 The student misapplies the parallel formula U = (1/2)CV² assuming both capacitors share the same voltage rather than the same charge, leading to an energy fraction of C₁/(C₁+C₂).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    In series, Q1=Q2=Q  ⟹  V1=QC1 and V2=QC2  ⟹  V1V2=C2C1=6.00 μF3.00 μF=2.00\text{In series, } Q_1 = Q_2 = Q \implies V_1 = \frac{Q}{C_1} \text{ and } V_2 = \frac{Q}{C_2} \implies \frac{V_1}{V_2} = \frac{C_2}{C_1} = \frac{6.00\text{ }\mu\text{F}}{3.00\text{ }\mu\text{F}} = 2.00

  2. Step 2

    U=12CV2  ⟹  U1Utotal=(12)C1V2(12)C1V2+(12)C2V2  ⟹  Fraction=C1C1+C2U = \frac{1}{2}CV^2 \implies \frac{U_1}{U_{\text{total}}} = \frac{\left(\frac{1}{2}\right)C_1 V^2}{\left(\frac{1}{2}\right)C_1 V^2 + \left(\frac{1}{2}\right)C_2 V^2} \implies \text{Fraction} = \frac{C_1}{C_1 + C_2}

    Correct

    U=Q22C  ⟹  U1Utotal=Q22C1Q22C1+Q22C2=1C11C1+1C2=C2C1+C2U = \frac{Q^2}{2C} \implies \frac{U_1}{U_{\text{total}}} = \frac{\frac{Q^2}{2C_1}}{\frac{Q^2}{2C_1} + \frac{Q^2}{2C_2}} = \frac{\frac{1}{C_1}}{\frac{1}{C_1} + \frac{1}{C_2}} = \frac{C_2}{C_1 + C_2}

    In a series circuit, the capacitors share the same charge QQ, not the same voltage VV. Using U=12CV2U = \frac{1}{2}CV^2 with an identical VV for both capacitors assumes a parallel connection. Because QQ is constant across series components, you should use U=Q22CU = \frac{Q^2}{2C}, which shows that energy is inversely proportional to capacitance.

  3. Step 3

    Fraction=3.00 μF3.00 μF+6.00 μF=3.009.00=13\text{Fraction} = \frac{3.00\text{ }\mu\text{F}}{3.00\text{ }\mu\text{F} + 6.00\text{ }\mu\text{F}} = \frac{3.00}{9.00} = \frac{1}{3}

    Correct

    U1Utotal=6.00 μF3.00 μF+6.00 μF=6.009.00=23≈0.667\frac{U_1}{U_{\text{total}}} = \frac{6.00\text{ }\mu\text{F}}{3.00\text{ }\mu\text{F} + 6.00\text{ }\mu\text{F}} = \frac{6.00}{9.00} = \frac{2}{3} \approx 0.667

    Your arithmetic substitution followed from your formula in step 2, but the resulting value is incorrect due to the inverted fraction.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that series capacitors store equal charges Q1=Q2=QQ_1 = Q_2 = Q.

You correctly related potential difference to capacitance via V=QCV = \frac{Q}{C} to find V1V2=2.00\frac{V_1}{V_2} = 2.00.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Shared voltage assumed in series energy calculation

You treated the voltage VV across both series capacitors as identical when writing U=12CV2U = \frac{1}{2}CV^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the constant parameter between series and parallel circuits. In parallel, capacitors share the same voltage (V1=V2=VV_1 = V_2 = V), so U=12CV2∝CU = \frac{1}{2}CV^2 \propto C. In series, capacitors share the same charge (Q1=Q2=QQ_1 = Q_2 = Q), so U=Q22C∝1CU = \frac{Q^2}{2C} \propto \frac{1}{C}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Common Variable
  • In series, charge QQ is identical across all components; in parallel, potential difference VV is identical across all branches.

  • Before choosing an energy formula, explicitly state whether QQ or VV is constant.

Select the Optimal Energy Formula
  • Use U=Q22CU = \frac{Q^2}{2C} when charge QQ is held constant, and U=12CV2U = \frac{1}{2}CV^2 when voltage VV is held constant.

  • Express capacitor energy in terms of the shared variable to eliminate it cleanly from ratio calculations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that for series capacitors, Q1=Q2=QQ_1 = Q_2 = Q, so U=Q22CU = \frac{Q^2}{2C}.

  2. Write the individual energies: U1=Q22C1U_1 = \frac{Q^2}{2C_1} and Utotal=Q22(1C1+1C2)U_{\text{total}} = \frac{Q^2}{2}\left(\frac{1}{C_1} + \frac{1}{C_2}\right).

  3. Divide U1U_1 by UtotalU_{\text{total}} to cancel Q22\frac{Q^2}{2}: U1Utotal=1/C11/C1+1/C2=C2C1+C2\frac{U_1}{U_{\text{total}}} = \frac{1/C_1}{1/C_1 + 1/C_2} = \frac{C_2}{C_1 + C_2}.

  4. Substitute C1=3.00 μFC_1 = 3.00\text{ }\mu\text{F} and C2=6.00 μFC_2 = 6.00\text{ }\mu\text{F}: U1Utotal=6.003.00+6.00=23≈0.667\frac{U_1}{U_{\text{total}}} = \frac{6.00}{3.00 + 6.00} = \frac{2}{3} \approx 0.667.

Final answer

V1V2=2.00\frac{V_1}{V_2} = 2.00, U1Utotal=23≈0.667\frac{U_1}{U_{\text{total}}} = \frac{2}{3} \approx 0.667

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice choosing between U=12CV2U = \frac{1}{2}CV^2 and U=Q22CU = \frac{Q^2}{2C} based on whether VV or QQ is constant.

  • Verify energy calculations using explicit voltages: V1=12.0 VV_1 = 12.0\text{ V} and V2=6.0 VV_2 = 6.0\text{ V}, then compute U1=12C1V12U_1 = \frac{1}{2}C_1 V_1^2 directly.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the ratio of C₁ to the total equivalent capacitance C_eq instead of the ratio to total energy, confusing capacitance ratio with energy fraction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Correct
  1. Step 1

    Q1=Q2=Q  ⟹  V1V2=C2C1  ⟹  V1V2=6.00  μF3.00  μF=2.00Q_1 = Q_2 = Q \implies \frac{V_1}{V_2} = \frac{C_2}{C_1} \implies \frac{V_1}{V_2} = \frac{6.00\;\mu\text{F}}{3.00\;\mu\text{F}} = 2.00

  2. Step 2

    1Ceq=13.00  μF+16.00  μF=12.00  μF  ⟹  Ceq=2.00  μF\frac{1}{C_{\text{eq}}} = \frac{1}{3.00\;\mu\text{F}} + \frac{1}{6.00\;\mu\text{F}} = \frac{1}{2.00\;\mu\text{F}} \implies C_{\text{eq}} = 2.00\;\mu\text{F}

  3. Step 3

    Fraction=CeqC1  ⟹  Fraction=2.00  μF3.00  μF=23\text{Fraction} = \frac{C_{\text{eq}}}{C_1} \implies \text{Fraction} = \frac{2.00\;\mu\text{F}}{3.00\;\mu\text{F}} = \frac{2}{3}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the series charge equality condition Q1=Q2=QQ_1 = Q_2 = Q.

You used the inverse capacitance relation to determine the voltage ratio V1/V2=2.00V_1 / V_2 = 2.00.

You recognized the valid relationship U1Utotal=CeqC1\frac{U_1}{U_{\text{total}}} = \frac{C_{\text{eq}}}{C_1} to obtain the exact energy fraction 23\frac{2}{3}.

CORRECTED PATH
ACEpath Teacher's Demonstration
Final answer

V1V2=2.00,  U1Utotal=23\frac{V_1}{V_2} = 2.00,\; \frac{U_1}{U_{\text{total}}} = \frac{2}{3}

NEXT STEPS
Final Takeaways from Your Teacher
  • To make your written derivations even clearer on exams, explicitly write down the energy formula U=Q22CU = \frac{Q^2}{2C} before taking the ratio U1/Utotal=Ceq/C1U_1 / U_{\text{total}} = C_{\text{eq}} / C_1.

  • Compare this result with parallel capacitor combinations, where voltage is constant and energy divides directly proportional to capacitance (U1/Utotal=C1/CeqU_1 / U_{\text{total}} = C_1 / C_{\text{eq}}).

Lock it in

Similar question

01

Two capacitors, CA=4.0  μFC_A = 4.0\;\mu\text{F} and CB=12.0  μFC_B = 12.0\;\mu\text{F}, are connected in series across a 24.0 V24.0\text{ V} battery. Determine the voltage VAV_A across CAC_A and VBV_B across CBC_B.

Answer

VA=18.0 VV_A = 18.0\text{ V}, VB=6.0 VV_B = 6.0\text{ V}. Because QQ is equal, VA/VB=CB/CA=12.0/4.0=3V_A / V_B = C_B / C_A = 12.0 / 4.0 = 3. Together VA+VB=24.0 VV_A + V_B = 24.0\text{ V}, yielding 3VB+VB=24.0 V  ⟹  VB=6.0 V3V_B + V_B = 24.0\text{ V} \implies V_B = 6.0\text{ V} and VA=18.0 VV_A = 18.0\text{ V}.

02

Two capacitors, C1=5.0  μFC_1 = 5.0\;\mu\text{F} and C2=15.0  μFC_2 = 15.0\;\mu\text{F}, are connected in series across a direct-current source. What fraction of the total energy stored in the pair is held by C2C_2?

Answer

U2Utotal=14=0.25\frac{U_2}{U_{\text{total}}} = \frac{1}{4} = 0.25. Since U=Q22CU = \frac{Q^2}{2C} and charge QQ is the same for both, energy divides inversely: U1/U2=C2/C1=15.0/5.0=3U_1 / U_2 = C_2 / C_1 = 15.0 / 5.0 = 3. Thus Utotal=U1+U2=4U2U_{\text{total}} = U_1 + U_2 = 4U_2, so U2/Utotal=1/4U_2 / U_{\text{total}} = 1/4.

03

Three capacitors with values CC, 2C2C, and 3C3C are wired in series across a voltage source V0V_0. Find the ratio of the potential difference across the smallest capacitor to the potential difference across the largest capacitor.

Answer

3.003.00. In series, all three capacitors hold identical charge QQ. From V=Q/CV = Q/C, the voltage across the smallest capacitor is Vsmall=Q/CV_{\text{small}} = Q/C, and across the largest is Vlarge=Q/(3C)V_{\text{large}} = Q/(3C). Therefore, Vsmall/Vlarge=(Q/C)/(Q/3C)=3V_{\text{small}} / V_{\text{large}} = (Q/C) / (Q/3C) = 3.

Loading workspace…