Resources

A student analyzes heat transfer between two large thermal reservoirs: Reservoir A at TA=500 KT_A = 500\text{ K} and Reservoir B at TB=250 KT_B = 250\text{ K}. An amount of heat ∣Q∣=1000 J|Q| = 1000\text{ J} conducts irreversibly through a steady-state copper rod connecting them. The student writes: ΔSA=+1000500\Delta S_A = +\frac{1000}{500} and ΔSB=−1000250\Delta S_B = -\frac{1000}{250}, concluding that ΔStotal=−2.0 J/K\Delta S_{\text{total}} = -2.0\text{ J}/\text{K}. (a) Identify and explain the sign convention error in the student's work. (b) Calculate the correct values of ΔSA\Delta S_A, ΔSB\Delta S_B, and the entropy change of the conducting rod ΔSrod\Delta S_{\text{rod}} at steady state. (c) Determine the correct total entropy generation rate of the universe ΔSuniv\Delta S_{\text{univ}}.

Answer and steps

Final answer

(a) The student assigned positive heat to the donor reservoir (QA<0Q_A < 0 because heat leaves Reservoir A) and negative heat to the recipient (QB>0Q_B > 0 because heat enters Reservoir B); (b) ΔSA=−2.00 J/K\Delta S_A = -2.00\text{ J}/\text{K}, ΔSB=+4.00 J/K\Delta S_B = +4.00\text{ J}/\text{K}, and ΔSrod=0 J/K\Delta S_{\text{rod}} = 0\text{ J}/\text{K}; (c) ΔSuniv=+2.00 J/K\Delta S_{\text{univ}} = +2.00\text{ J}/\text{K}

Steps

(a) Identifying and Explaining the Sign Convention Error

By definition, the entropy change of an ideal thermal reservoir at constant absolute temperature TT that exchanges heat QQ is given by:

ΔS=QT\Delta S = \frac{Q}{T}

The standard thermodynamic sign convention dictates that:

  • Heat entering a system is positive (Q>0Q > 0).
  • Heat leaving a system is negative (Q<0Q < 0).

Because heat naturally conducts from the hotter body to the colder body:

  • Heat flows out of Reservoir A (TA=500 KT_A = 500\text{ K}), so QA=−1000 JQ_A = -1000\text{ J}.
  • Heat flows into Reservoir B (TB=250 KT_B = 250\text{ K}), so QB=+1000 JQ_B = +1000\text{ J}.

The student erroneously reversed these signs, treating heat loss as positive and heat gain as negative, which led to a negative total entropy change that contradicts the Second Law of Thermodynamics.


(b) Calculating ΔSA\Delta S_A, ΔSB\Delta S_B, and ΔSrod\Delta S_{\text{rod}}

  1. Entropy change of Reservoir A: ΔSA=QATA=−1000 J500 K=−2.00 J/K\Delta S_A = \frac{Q_A}{T_A} = \frac{-1000\text{ J}}{500\text{ K}} = -2.00\text{ J}/\text{K}
  2. Entropy change of Reservoir B: ΔSB=QBTB=+1000 J250 K=+4.00 J/K\Delta S_B = \frac{Q_B}{T_B} = \frac{+1000\text{ J}}{250\text{ K}} = +4.00\text{ J}/\text{K}
  3. Entropy change of the connecting rod: Since the rod operates under steady-state conditions, its macroscopic state variables—including its local temperatures and thermodynamic state—do not change over time. Because entropy is a state function: ΔSrod=0 J/K\Delta S_{\text{rod}} = 0\text{ J}/\text{K}

(c) Calculating the Total Entropy Change of the Universe

The universe consists of the two reservoirs and the conducting rod:

ΔSuniv=ΔSA+ΔSB+ΔSrod\Delta S_{\text{univ}} = \Delta S_A + \Delta S_B + \Delta S_{\text{rod}}

Substitute the calculated values:

ΔSuniv=−2.00 J/K+4.00 J/K+0 J/K=+2.00 J/K\Delta S_{\text{univ}} = -2.00\text{ J}/\text{K} + 4.00\text{ J}/\text{K} + 0\text{ J}/\text{K} = +2.00\text{ J}/\text{K}

Because spontaneous heat conduction through a finite temperature difference is an irreversible process, the total entropy change of the universe must be strictly positive (ΔSuniv>0\Delta S_{\text{univ}} > 0), which confirms the Second Law of Thermodynamics.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that the rod is in a steady state and incorrectly assumes heat conduction through the rod changes its internal entropy by ΔS_rod = Q/T_avg.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Heat leaves Reservoir A so QAQ_A is negative, and heat enters Reservoir B so QBQ_B is positive. The student assigned the signs in reverse because heat loss decreases entropy and heat gain increases entropy.

  2. Step 2

    ΔSA=−1000 J500 K=−2.0 J/K\Delta S_A = -\frac{1000\text{ J}}{500\text{ K}} = -2.0\text{ J/K} ⟹ ΔSB=+1000 J250 K=+4.0 J/K\Delta S_B = +\frac{1000\text{ J}}{250\text{ K}} = +4.0\text{ J/K}

  3. Step 3

    Tavg=500 K+250 K2=375 KT_{\text{avg}} = \frac{500\text{ K} + 250\text{ K}}{2} = 375\text{ K} ⟹ ΔSrod=1000 J375 K=+2.67 J/K\Delta S_{\text{rod}} = \frac{1000\text{ J}}{375\text{ K}} = +2.67\text{ J/K}

    Correct

    ΔSrod=0 J/K\Delta S_{\text{rod}} = 0\text{ J/K}

    Because the rod is operating under steady-state conditions, its temperature profile and internal energy distribution remain constant in time. Since entropy is a state function, any system in a steady state has ΔS=0\Delta S = 0.

  4. Step 4

    ΔSuniv=ΔSA+ΔSB+ΔSrod=−2.0 J/K+4.0 J/K+2.67 J/K=+4.67 J/K\Delta S_{\text{univ}} = \Delta S_A + \Delta S_B + \Delta S_{\text{rod}} = -2.0\text{ J/K} + 4.0\text{ J/K} + 2.67\text{ J/K} = +4.67\text{ J/K}

    Correct

    ΔSuniv=ΔSA+ΔSB+ΔSrod=−2.00 J/K+4.00 J/K+0 J/K=+2.00 J/K\Delta S_{\text{univ}} = \Delta S_A + \Delta S_B + \Delta S_{\text{rod}} = -2.00\text{ J/K} + 4.00\text{ J/K} + 0\text{ J/K} = +2.00\text{ J/K}

    Your formula for total entropy change was set up properly, but the result was thrown off by substituting your non-zero value for ΔSrod\Delta S_{\text{rod}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly explained the heat transfer sign convention for both donor and receiver reservoirs.

You correctly calculated the individual entropy changes for Reservoir A and Reservoir B.

You correctly set up the sum of component entropy changes to find the total entropy change of the universe.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Steady-state entropy misconception

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the heat conducting through a medium with heat being stored or accumulated in that medium, forgetting that a steady-state system maintains constant thermodynamic state variables over time, which requires ΔS=0\Delta S = 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
State Function in Steady State
  • Entropy SS is a state function. If a component operates at steady state, its temperature and energy profiles do not change over time.

  • Always set ΔScomponent=0\Delta S_{\text{component}} = 0 for any component explicitly identified as being in a steady state.

Throughput vs. Accumulation
  • Heat conducting continuously through a body enters and exits at identical rates under steady state (Qin=QoutQ_{\text{in}} = Q_{\text{out}}), resulting in zero net heat retained.

  • Do not compute QTavg\frac{Q}{T_{\text{avg}}} for a transmission conduit unless heat is actually retained to change its internal energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that the conducting rod is in a steady state, meaning its internal state does not change: ΔSrod=0 J/K\Delta S_{\text{rod}} = 0\text{ J/K}.

  2. Sum the entropy changes of all parts of the universe: ΔSuniv=ΔSA+ΔSB+ΔSrod=−2.00 J/K+4.00 J/K+0 J/K=+2.00 J/K\Delta S_{\text{univ}} = \Delta S_A + \Delta S_B + \Delta S_{\text{rod}} = -2.00\text{ J/K} + 4.00\text{ J/K} + 0\text{ J/K} = +2.00\text{ J/K}.

Final answer

ΔSA=−2.00 J/K\Delta S_A = -2.00\text{ J/K}, ΔSB=+4.00 J/K\Delta S_B = +4.00\text{ J/K}, ΔSrod=0 J/K\Delta S_{\text{rod}} = 0\text{ J/K}, and ΔSuniv=+2.00 J/K\Delta S_{\text{univ}} = +2.00\text{ J/K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of steady state versus transient state in thermodynamic systems.

  • Practice identifying when to apply ΔS=0\Delta S = 0 for intermediate transport devices such as pipes, heat exchanger walls, and conducting rods.

OverviewACEpath Teacher's Diagnosis

02 The student believes that total entropy is conserved in any closed heat transfer process, concluding that the universe's entropy change must be zero.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Heat is transferred from hot to cold, so Reservoir A loses heat and Reservoir B gains heat. The student gave the wrong signs because heat entering an object adds entropy and heat leaving removes entropy.

  2. Step 2

    ΔSA=−1000 J/500 K=−2.0 J/K  ⟹  ΔSB=+1000 J/250 K=+4.0 J/K  ⟹  ΔSrod=0 J/K because the rod is operating in steady state.\Delta S_A = -1000\text{ J}/500\text{ K} = -2.0\text{ J}/\text{K} \implies \Delta S_B = +1000\text{ J}/250\text{ K} = +4.0\text{ J}/\text{K} \implies \Delta S_{\text{rod}} = 0\text{ J}/\text{K}\text{ because the rod is operating in steady state.}

  3. Step 3

    By conservation of entropy in the universe, ΔSuniv=0 J/K\Delta S_{\text{univ}} = 0\text{ J}/\text{K}.

    Correct

    ΔSuniv=ΔSA+ΔSB+ΔSrod=−2.0 J/K+4.0 J/K+0 J/K=+2.0 J/K\Delta S_{\text{univ}} = \Delta S_A + \Delta S_B + \Delta S_{\text{rod}} = -2.0\text{ J}/\text{K} + 4.0\text{ J}/\text{K} + 0\text{ J}/\text{K} = +2.0\text{ J}/\text{K}

    Entropy is not a conserved quantity. Spontaneous heat conduction across a finite temperature difference is an irreversible process that generates entropy, so ΔSuniv>0\Delta S_{\text{univ}} > 0.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that Reservoir A loses heat and Reservoir B gains heat.

You applied the reservoir entropy formula ΔS=QT\Delta S = \frac{Q}{T} with correct signs and values in part (b).

You correctly deduced that the entropy change of the rod is zero at steady state.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
False conservation assumption for entropy

You treated entropy as a conserved quantity analogous to energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the First Law of Thermodynamics (conservation of energy) with the Second Law of Thermodynamics (entropy generation in irreversible processes).

REASONING PATH
Your ACEpath teacher’s suggested approach
Second Law of Thermodynamics
  • For an isolated system (the universe), ΔSuniv=0\Delta S_{\text{univ}} = 0 only for reversible processes, and ΔSuniv>0\Delta S_{\text{univ}} > 0 for irreversible processes.

  • Sum the entropy changes of all participating components (ΔSuniv=∑ΔSi\Delta S_{\text{univ}} = \sum \Delta S_i) rather than assuming the total equals zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the total entropy change of the universe as the sum of all components: ΔSuniv=ΔSA+ΔSB+ΔSrod\Delta S_{\text{univ}} = \Delta S_A + \Delta S_B + \Delta S_{\text{rod}}.

  2. Substitute your values from part (b): ΔSuniv=−2.0 J/K+4.0 J/K+0 J/K\Delta S_{\text{univ}} = -2.0\text{ J}/\text{K} + 4.0\text{ J}/\text{K} + 0\text{ J}/\text{K}.

  3. Add the terms to obtain ΔSuniv=+2.0 J/K\Delta S_{\text{univ}} = +2.0\text{ J}/\text{K}.

Final answer

ΔSuniv=+2.0 J/K\Delta S_{\text{univ}} = +2.0\text{ J}/\text{K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between conserved quantities (like energy) and non-conserved state functions (like entropy).

  • Practice calculating ΔSuniv\Delta S_{\text{univ}} for spontaneous thermal mixing and conduction by summing all component entropy changes.

OverviewACEpath Teacher's Diagnosis

03 The student assumes irreversible heat conduction always leads to positive entropy changes for all interacting systems, setting all ΔS values to positive magnitudes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The student used a negative sign for Reservoir B, but spontaneous heat flow always increases entropy for every component. Therefore, both reservoirs must have positive entropy changes.

    Correct

    Heat leaves Reservoir A (QA=−1000 JQ_A = -1000\text{ J}) and enters Reservoir B (QB=+1000 JQ_B = +1000\text{ J}). The standard sign convention defines heat added to a system as positive (Q>0Q > 0) and heat removed as negative (Q<0Q < 0). The original work inverted both signs.

    The Second Law of Thermodynamics dictates that the total entropy change of the universe must be non-negative (ΔSuniv≥0\Delta S_{\text{univ}} \ge 0), but individual subsystems can lose entropy whenever heat leaves them (Q<0Q < 0).

  2. Step 2

    ΔSA=+1000 J500 K=+2.0 J/K\Delta S_A = \frac{+1000\text{ J}}{500\text{ K}} = +2.0\text{ J}/\text{K}

    Correct

    ΔSA=QATA=−1000 J500 K=−2.00 J/K\Delta S_A = \frac{Q_A}{T_A} = \frac{-1000\text{ J}}{500\text{ K}} = -2.00\text{ J}/\text{K}

    Because heat conducts away from the hotter Reservoir A to the colder Reservoir B, heat flow for Reservoir A is negative (QA=−1000 JQ_A = -1000\text{ J}), yielding a negative entropy change.

  3. Step 3

    ΔSB=+1000 J250 K=+4.0 J/K  ⟹  ΔSrod=0 J/K at steady state.\Delta S_B = \frac{+1000\text{ J}}{250\text{ K}} = +4.0\text{ J}/\text{K} \implies \Delta S_{\text{rod}} = 0\text{ J}/\text{K}\text{ at steady state.}

  4. Step 4

    ΔSuniv=ΔSA+ΔSB+ΔSrod=+2.0 J/K+4.0 J/K+0 J/K=+6.0 J/K\Delta S_{\text{univ}} = \Delta S_A + \Delta S_B + \Delta S_{\text{rod}} = +2.0\text{ J}/\text{K} + 4.0\text{ J}/\text{K} + 0\text{ J}/\text{K} = +6.0\text{ J}/\text{K}

    Correct

    ΔSuniv=ΔSA+ΔSB+ΔSrod=−2.00 J/K+4.00 J/K+0 J/K=+2.00 J/K\Delta S_{\text{univ}} = \Delta S_A + \Delta S_B + \Delta S_{\text{rod}} = -2.00\text{ J}/\text{K} + 4.00\text{ J}/\text{K} + 0\text{ J}/\text{K} = +2.00\text{ J}/\text{K}

    Your summation method is correct, but your final total is affected by the incorrect sign assigned to ΔSA\Delta S_A.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the magnitude and sign of the entropy change for Reservoir B as +4.0 J/K+4.0\text{ J}/\text{K}.

You correctly recognized that a conducting rod operating at steady state has zero net entropy change.

You correctly set up the total universe entropy change as the sum of all individual constituent changes.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Subsystem Entropy Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the global statement of the Second Law of Thermodynamics (ΔSuniv≥0\Delta S_{\text{univ}} \ge 0) with a local constraint on individual subsystems, incorrectly assuming that every component participating in an irreversible process must experience an increase in entropy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Sign Convention for Heat
  • Q>0Q > 0 when heat is absorbed by a system, and Q<0Q < 0 when heat leaves a system.

  • Check the direction of thermal energy transfer before writing ΔS=QT\Delta S = \frac{Q}{T} for each reservoir.

Second Law Scope
  • Only the total entropy of an isolated system (the universe) must satisfy ΔStotal≥0\Delta S_{\text{total}} \ge 0; individual subsystems can have ΔS<0\Delta S < 0 if heat leaves them.

  • Allow individual reservoirs to have negative ΔS\Delta S as long as the combined entropy change of the universe remains positive for an irreversible process.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Assign QA=−1000 JQ_A = -1000\text{ J} because Reservoir A loses heat to the rod: ΔSA=−1000 J500 K=−2.00 J/K\Delta S_A = \frac{-1000\text{ J}}{500\text{ K}} = -2.00\text{ J}/\text{K}.

  2. Sum the subsystem entropy changes: ΔSuniv=ΔSA+ΔSB+ΔSrod=−2.00 J/K+4.00 J/K+0 J/K=+2.00 J/K\Delta S_{\text{univ}} = \Delta S_A + \Delta S_B + \Delta S_{\text{rod}} = -2.00\text{ J}/\text{K} + 4.00\text{ J}/\text{K} + 0\text{ J}/\text{K} = +2.00\text{ J}/\text{K}.

Final answer

(a) Heat leaves Reservoir A (QA<0Q_A < 0) and enters Reservoir B (QB>0Q_B > 0). (b) ΔSA=−2.00 J/K\Delta S_A = -2.00\text{ J}/\text{K}, ΔSB=+4.00 J/K\Delta S_B = +4.00\text{ J}/\text{K}, ΔSrod=0 J/K\Delta S_{\text{rod}} = 0\text{ J}/\text{K}. (c) ΔSuniv=+2.00 J/K\Delta S_{\text{univ}} = +2.00\text{ J}/\text{K}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice applying the thermodynamic heat sign convention (Qin>0Q_{\text{in}} > 0, Qout<0Q_{\text{out}} < 0) separately to every interacting thermal reservoir.

  • Verify that negative entropy change for a donor system is not only permitted, but physically necessary whenever heat leaves it at constant temperature.

Lock it in

Similar question

01

A thermal conductor connects a reservoir at 400 K400\text{ K} to a reservoir at 200 K200\text{ K}. If 800 J800\text{ J} of heat conducts through the conductor under steady-state conditions, calculate ΔShot\Delta S_{\text{hot}}, ΔScold\Delta S_{\text{cold}}, ΔSconductor\Delta S_{\text{conductor}}, and ΔSuniv\Delta S_{\text{univ}}.

Answer

ΔShot=−2.0 J/K\Delta S_{\text{hot}} = -2.0\text{ J/K}, ΔScold=+4.0 J/K\Delta S_{\text{cold}} = +4.0\text{ J/K}, ΔSconductor=0 J/K\Delta S_{\text{conductor}} = 0\text{ J/K}, and ΔSuniv=+2.0 J/K\Delta S_{\text{univ}} = +2.0\text{ J/K}. Key steps: heat leaves the hot reservoir (QH=−800 JQ_H = -800\text{ J}), enters the cold reservoir (QC=+800 JQ_C = +800\text{ J}), and the steady-state conductor has ΔS=0\Delta S = 0.

02

A steady heat current of Q˙=150 W\dot{Q} = 150\text{ W} passes through a solid cylindrical wall between an indoor room at 300 K300\text{ K} and the outdoors at 250 K250\text{ K}. Calculate the rate of entropy generation in the universe S˙gen\dot{S}_{\text{gen}}, and state the rate of entropy change of the wall dSwalldt\frac{dS_{\text{wall}}}{dt}.

Answer

dSwalldt=0 W/K\frac{dS_{\text{wall}}}{dt} = 0\text{ W/K} and S˙gen=+0.10 W/K\dot{S}_{\text{gen}} = +0.10\text{ W/K}. Key steps: for steady state, dSwalldt=0\frac{dS_{\text{wall}}}{dt} = 0; S˙gen=−Q˙Tin+Q˙Tout=−150300+150250=−0.50+0.60=+0.10 W/K\dot{S}_{\text{gen}} = -\frac{\dot{Q}}{T_{\text{in}}} + \frac{\dot{Q}}{T_{\text{out}}} = -\frac{150}{300} + \frac{150}{250} = -0.50 + 0.60 = +0.10\text{ W/K}.

03

An aluminum rod of mass 0.50 kg0.50\text{ kg} initially at a uniform temperature of 300 K300\text{ K} has its ends suddenly clamped to reservoirs at 400 K400\text{ K} and 200 K200\text{ K}. Explain qualitatively why ΔSrod≠0\Delta S_{\text{rod}} \neq 0 during the initial transient stage, but dSroddt=0\frac{dS_{\text{rod}}}{dt} = 0 once steady state is reached.

Answer

During the transient stage, the temperature profile changes and internal energy is redistributed/accumulated, so the microscopic state changes and ΔSrod≠0\Delta S_{\text{rod}} \neq 0. Once steady state is reached, the temperature at every point in the rod becomes constant in time, meaning its thermodynamic state is fixed and its entropy remains constant (dSroddt=0\frac{dS_{\text{rod}}}{dt} = 0).

Loading workspace…