Resources

In an AP Physics C mechanics laboratory experiment, students record the motion of a 0.500 kg0.500\text{ kg} cart rolling down a straight incline using a photogate array and a rotary motion sensor. The digital acquisition software outputs a piecewise linear velocity-time profile with experimental uncertainty: from t=0.00 st = 0.00\text{ s} to t=1.20 st = 1.20\text{ s}, the cart accelerates from rest to v1=(1.80±0.05) m/sv_1 = (1.80 \pm 0.05)\text{ m/s}; from t=1.20 st = 1.20\text{ s} to t=3.00 st = 3.00\text{ s}, it coasts across a level track with slight friction, its velocity dropping from 1.80 m/s1.80\text{ m/s} to v2=(1.44±0.04) m/sv_2 = (1.44 \pm 0.04)\text{ m/s}. Using numerical graphical integration (trapezoidal area summation): (a) calculate the experimental acceleration along the incline during 0.00 s≤t≤1.20 s0.00\text{ s} \le t \le 1.20\text{ s}, and (b) compute the total displacement Δx\Delta x of the cart from t=0.00 st = 0.00\text{ s} to t=3.00 st = 3.00\text{ s}, propagating the absolute experimental uncertainty.

Answer and steps

Final answer

(a) a=(1.50±0.04) m/s2a = (1.50 \pm 0.04)\text{ m/s}^2; (b) Δx=(4.00±0.08) m\Delta x = (4.00 \pm 0.08)\text{ m}

Steps

Part (a): Acceleration Along the Incline (0.00 s≤t≤1.20 s0.00\text{ s} \le t \le 1.20\text{ s})

  1. Calculate the central value of acceleration:
    The cart accelerates from rest (v0=0 m/sv_0 = 0\text{ m/s}) to v1=1.80 m/sv_1 = 1.80\text{ m/s} in a time interval of Δt1=1.20 s−0.00 s=1.20 s\Delta t_1 = 1.20\text{ s} - 0.00\text{ s} = 1.20\text{ s}. The acceleration is given by the slope of the velocity-time graph: a=ΔvΔt1=v1−v0Δt1=1.80 m/s−0 m/s1.20 s=1.50 m/s2a = \frac{\Delta v}{\Delta t_1} = \frac{v_1 - v_0}{\Delta t_1} = \frac{1.80\text{ m/s} - 0\text{ m/s}}{1.20\text{ s}} = 1.50\text{ m/s}^2
  2. Propagate the experimental uncertainty:
    Since time measurement uncertainty is negligible compared to the velocity sensor uncertainty δv1=0.05 m/s\delta v_1 = 0.05\text{ m/s}: δa=δv1Δt1=0.05 m/s1.20 s≈0.0417 m/s2≈0.04 m/s2\delta a = \frac{\delta v_1}{\Delta t_1} = \frac{0.05\text{ m/s}}{1.20\text{ s}} \approx 0.0417\text{ m/s}^2 \approx 0.04\text{ m/s}^2

    Therefore, the experimental acceleration is: a=(1.50±0.04) m/s2a = (1.50 \pm 0.04)\text{ m/s}^2


Part (b): Total Displacement and Uncertainty Propagation (0.00 s≤t≤3.00 s0.00\text{ s} \le t \le 3.00\text{ s})

  1. Calculate the displacement for each segment using the area under the v-tv\text{-}t curve:

    • Segment 1 (0.00 s0.00\text{ s} to 1.20 s1.20\text{ s}): Triangular area under the curve Δx1=12⋅Δt1⋅v1=12(1.20 s)(1.80 m/s)=1.08 m\Delta x_1 = \frac{1}{2} \cdot \Delta t_1 \cdot v_1 = \frac{1}{2}(1.20\text{ s})(1.80\text{ m/s}) = 1.08\text{ m}
    • Segment 2 (1.20 s1.20\text{ s} to 3.00 s3.00\text{ s}): Trapezoidal area under the curve with Δt2=3.00 s−1.20 s=1.80 s\Delta t_2 = 3.00\text{ s} - 1.20\text{ s} = 1.80\text{ s} Δx2=v1+v22⋅Δt2=1.80 m/s+1.44 m/s2(1.80 s)=(1.62 m/s)(1.80 s)=2.916 m\Delta x_2 = \frac{v_1 + v_2}{2} \cdot \Delta t_2 = \frac{1.80\text{ m/s} + 1.44\text{ m/s}}{2}(1.80\text{ s}) = (1.62\text{ m/s})(1.80\text{ s}) = 2.916\text{ m}
  2. Calculate total displacement: Δx=Δx1+Δx2=1.08 m+2.916 m=3.996 m≈4.00 m\Delta x = \Delta x_1 + \Delta x_2 = 1.08\text{ m} + 2.916\text{ m} = 3.996\text{ m} \approx 4.00\text{ m}
  3. Propagate uncertainty:
    Express total displacement directly as a function of the independent measured quantities v1v_1 and v2v_2 to avoid double-counting or incorrectly treating shared variables: Δx=12Δt1v1+12Δt2v1+12Δt2v2=12(Δt1+Δt2)v1+12Δt2v2\Delta x = \frac{1}{2}\Delta t_1 v_1 + \frac{1}{2}\Delta t_2 v_1 + \frac{1}{2}\Delta t_2 v_2 = \frac{1}{2}(\Delta t_1 + \Delta t_2)v_1 + \frac{1}{2}\Delta t_2 v_2

    Substitute Δt1=1.20 s\Delta t_1 = 1.20\text{ s} and Δt2=1.80 s\Delta t_2 = 1.80\text{ s}: Δx=12(3.00 s)v1+12(1.80 s)v2=1.50v1+0.90v2\Delta x = \frac{1}{2}(3.00\text{ s})v_1 + \frac{1}{2}(1.80\text{ s})v_2 = 1.50 v_1 + 0.90 v_2

    Using standard propagation of independent uncertainties in quadrature: δ(Δx)=(∂Δx∂v1δv1)2+(∂Δx∂v2δv2)2\delta(\Delta x) = \sqrt{\left(\frac{\partial \Delta x}{\partial v_1} \delta v_1\right)^2 + \left(\frac{\partial \Delta x}{\partial v_2} \delta v_2\right)^2} δ(Δx)=(1.50⋅0.05)2+(0.90⋅0.04)2=(0.075)2+(0.036)2=0.005625+0.001296=0.006921≈0.0832 m≈0.08 m\delta(\Delta x) = \sqrt{(1.50 \cdot 0.05)^2 + (0.90 \cdot 0.04)^2} = \sqrt{(0.075)^2 + (0.036)^2} = \sqrt{0.005625 + 0.001296} = \sqrt{0.006921} \approx 0.0832\text{ m} \approx 0.08\text{ m}

    Therefore, the total displacement is: Δx=(4.00±0.08) m\Delta x = (4.00 \pm 0.08)\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the total time interval of 3.00 s instead of the segment duration Δt2 = 1.80 s when computing the area of the second trapezoid.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    a=(1.80−0.00)/1.20  ⟹  a=1.50 m/s2a = (1.80 - 0.00) / 1.20 \implies a = 1.50\text{ m/s}^2

  2. Step 2

    Δx1=(12)⋅(0+1.80)⋅1.20=1.08 m\Delta x_1 = \left(\frac{1}{2}\right) \cdot (0 + 1.80) \cdot 1.20 = 1.08\text{ m}

  3. Step 3

    Δx2=(12)⋅(1.80+1.44)⋅3.00=4.86 m\Delta x_2 = \left(\frac{1}{2}\right) \cdot (1.80 + 1.44) \cdot 3.00 = 4.86\text{ m}

    Correct

    Δx2=1.80 m/s+1.44 m/s2(3.00 s−1.20 s)=(1.62 m/s)(1.80 s)=2.916 m\Delta x_2 = \frac{1.80\text{ m/s} + 1.44\text{ m/s}}{2}(3.00\text{ s} - 1.20\text{ s}) = (1.62\text{ m/s})(1.80\text{ s}) = 2.916\text{ m}

    You substituted the cumulative clock time t=3.00 st = 3.00\text{ s} as the width of the second trapezoid instead of the segment duration Δt2=3.00 s−1.20 s=1.80 s\Delta t_2 = 3.00\text{ s} - 1.20\text{ s} = 1.80\text{ s}.

  4. Step 4

    Δx=1.08+4.86=5.94 m\Delta x = 1.08 + 4.86 = 5.94\text{ m}

    Correct

    Δx=1.08 m+2.916 m=3.996 m≈4.00 m\Delta x = 1.08\text{ m} + 2.916\text{ m} = 3.996\text{ m} \approx 4.00\text{ m}

    This summation is mathematically consistent with your prior numbers, but it carries forward the incorrect value of Δx2\Delta x_2.

  5. Step 5

    δ(Δx)=(12)⋅1.20⋅0.05+(12)⋅3.00⋅(0.05+0.04)=0.03+0.135=0.165 m  ⟹  Δx=(5.94±0.17) m\delta(\Delta x) = \left(\frac{1}{2}\right) \cdot 1.20 \cdot 0.05 + \left(\frac{1}{2}\right) \cdot 3.00 \cdot (0.05 + 0.04) = 0.03 + 0.135 = 0.165\text{ m} \implies \Delta x = (5.94 \pm 0.17)\text{ m}

    Correct

    δ(Δx)=(∂Δx∂v1δv1)2+(∂Δx∂v2δv2)2=(1.50⋅0.05)2+(0.90⋅0.04)2≈0.08 m\delta(\Delta x) = \sqrt{\left(\frac{\partial \Delta x}{\partial v_1}\delta v_1\right)^2 + \left(\frac{\partial \Delta x}{\partial v_2}\delta v_2\right)^2} = \sqrt{(1.50 \cdot 0.05)^2 + (0.90 \cdot 0.04)^2} \approx 0.08\text{ m}

    You used the full time 3.00 s3.00\text{ s} instead of 1.80 s1.80\text{ s}, and you added segment uncertainties linearly rather than grouping the shared variable v1v_1 and combining independent random uncertainties in quadrature.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the slope of the velocity-time graph as the acceleration for the first segment.

You used the correct trapezoidal/triangular geometric formula to find the area under the velocity-time curve for the first segment.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Interval Duration vs. Clock Time Confusion

You plugged in the clock reading t=3.00 st = 3.00\text{ s} as the width of the second interval instead of subtracting the start time to get Δt2=3.00 s−1.20 s=1.80 s\Delta t_2 = 3.00\text{ s} - 1.20\text{ s} = 1.80\text{ s}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the instantaneous timestamp tt on the horizontal axis with the elapsed time interval Δt=tfinal−tinitial\Delta t = t_{\text{final}} - t_{\text{initial}} when integrating piecewise linear curves, which also cascaded into using upper-bound linear error summation rather than quadrature propagation for independent quantities.

REASONING PATH
Your ACEpath teacher’s suggested approach
Subinterval Duration
  • For any segment [ta,tb][t_a, t_b], the trapezoid base is Δt=tb−ta\Delta t = t_b - t_a, never tbt_b.

  • Check the start and end times on the horizontal axis for each piece and compute Δt\Delta t before calculating the area.

Uncertainty Propagation of Shared Variables
  • When a variable appears in multiple terms, simplify the expression to independent variables before taking partial derivatives and adding in quadrature: δf=∑(∂f∂xiδxi)2\delta f = \sqrt{\sum (\frac{\partial f}{\partial x_i} \delta x_i)^2}.

  • Group terms involving v1v_1 so that Δx=12(Δt1+Δt2)v1+12Δt2v2\Delta x = \frac{1}{2}(\Delta t_1 + \Delta t_2)v_1 + \frac{1}{2}\Delta t_2 v_2, then apply quadrature.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the time duration of the second segment: Δt2=3.00 s−1.20 s=1.80 s\Delta t_2 = 3.00\text{ s} - 1.20\text{ s} = 1.80\text{ s}.

  2. Compute the trapezoidal area of segment 2: Δx2=v1+v22Δt2=1.80 m/s+1.44 m/s2(1.80 s)=2.916 m\Delta x_2 = \frac{v_1 + v_2}{2}\Delta t_2 = \frac{1.80\text{ m/s} + 1.44\text{ m/s}}{2}(1.80\text{ s}) = 2.916\text{ m}.

  3. Sum the segment displacements: Δx=1.08 m+2.916 m=3.996 m≈4.00 m\Delta x = 1.08\text{ m} + 2.916\text{ m} = 3.996\text{ m} \approx 4.00\text{ m}.

  4. Express Δx\Delta x in terms of independent parameters: Δx=12(Δt1+Δt2)v1+12Δt2v2=1.50v1+0.90v2\Delta x = \frac{1}{2}(\Delta t_1 + \Delta t_2)v_1 + \frac{1}{2}\Delta t_2 v_2 = 1.50 v_1 + 0.90 v_2.

  5. Propagate the uncertainty in quadrature: δ(Δx)=(1.50×0.05 m)2+(0.90×0.04 m)2=0.005625+0.001296≈0.08 m\delta(\Delta x) = \sqrt{(1.50 \times 0.05\text{ m})^2 + (0.90 \times 0.04\text{ m})^2} = \sqrt{0.005625 + 0.001296} \approx 0.08\text{ m}.

Final answer

Δx=(4.00±0.08) m\Delta x = (4.00 \pm 0.08)\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always calculate interval widths as Δt=tend−tstart\Delta t = t_{\text{end}} - t_{\text{start}} when dividing graphs into sections.

  • Group correlated variables together before computing partial derivatives for experimental uncertainty propagation in quadrature.

OverviewACEpath Teacher's Diagnosis

02 The student treats the second phase as a triangle instead of a trapezoid, forgetting that the cart starts the second interval with a non-zero initial velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    a=1.80−01.20=1.50 m/s2a = \frac{1.80 - 0}{1.20} = 1.50\text{ m/s}^2

  2. Step 2

    Δx1=12⋅1.80⋅1.20=1.08 m\Delta x_1 = \frac{1}{2} \cdot 1.80 \cdot 1.20 = 1.08\text{ m}

  3. Step 3

    Δx2=12⋅1.44⋅1.80=1.296 m\Delta x_2 = \frac{1}{2} \cdot 1.44 \cdot 1.80 = 1.296\text{ m}

    Correct

    Δx2=v1+v22⋅Δt2=1.80+1.442(1.80)=2.916 m\Delta x_2 = \frac{v_1 + v_2}{2} \cdot \Delta t_2 = \frac{1.80 + 1.44}{2}(1.80) = 2.916\text{ m}

    The cart does not accelerate from rest during the second phase; its velocity decreases from v1=1.80 m/sv_1 = 1.80\text{ m/s} to v2=1.44 m/sv_2 = 1.44\text{ m/s}. The area under this section is a trapezoid, not a triangle.

  4. Step 4

    Δx=1.08+1.296=2.376 m\Delta x = 1.08 + 1.296 = 2.376\text{ m}

    Correct

    Δx=Δx1+Δx2=1.08+2.916=3.996 m≈4.00 m\Delta x = \Delta x_1 + \Delta x_2 = 1.08 + 2.916 = 3.996\text{ m} \approx 4.00\text{ m}

    You summed the segment displacements accurately, but this value was affected by the error in Δx2\Delta x_2.

  5. Step 5

    δ(Δx)=0.5⋅1.20⋅0.05+0.5⋅1.80⋅0.04=0.03+0.036=0.066 m  ⟹  Δx=(2.38±0.07) m\delta(\Delta x) = 0.5 \cdot 1.20 \cdot 0.05 + 0.5 \cdot 1.80 \cdot 0.04 = 0.03 + 0.036 = 0.066\text{ m} \implies \Delta x = (2.38 \pm 0.07)\text{ m}

    Correct

    Δx=1.50v1+0.90v2  ⟹  δ(Δx)=(1.50×0.05)2+(0.90×0.04)2≈0.08 m  ⟹  Δx=(4.00±0.08) m\Delta x = 1.50 v_1 + 0.90 v_2 \implies \delta(\Delta x) = \sqrt{(1.50 \times 0.05)^2 + (0.90 \times 0.04)^2} \approx 0.08\text{ m} \implies \Delta x = (4.00 \pm 0.08)\text{ m}

    You added individual absolute uncertainties linearly instead of combining independent experimental uncertainties in quadrature, and your formula omitted the dependence of Δx2\Delta x_2 on the initial velocity v1v_1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the slope of the velocity-time graph as the acceleration for the first segment.

You calculated the triangular area of the first segment accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometric Area Misidentification

You treated the coasting segment as a triangle starting from 0 m/s0\text{ m/s} rather than a trapezoid between 1.80 m/s1.80\text{ m/s} and 1.44 m/s1.44\text{ m/s}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the non-zero initial boundary condition of the second interval when calculating graphical displacement, assuming every linear graph segment forms a simple triangle with the time axis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Non-Zero Baseline Velocity
  • For a segment spanning [ta,tb][t_a, t_b] with linear velocity changing from vav_a to vbv_b, the area is a trapezoid: Area=va+vb2(tb−ta)\text{Area} = \frac{v_a + v_b}{2}(t_b - t_a).

  • Always sketch both boundary heights on the v-tv\text{-}t graph before choosing between a triangle, rectangle, or trapezoid formula.

Propagate Independent Uncertainties in Quadrature
  • When combining independent uncertain quantities q=f(x,y)q = f(x, y), absolute uncertainties combine via quadrature: δq=(∂f∂xδx)2+(∂f∂yδy)2\delta q = \sqrt{\left(\frac{\partial f}{\partial x}\delta x\right)^2 + \left(\frac{\partial f}{\partial y}\delta y\right)^2}.

  • Rewrite total displacement as a single function of the measured velocities v1v_1 and v2v_2 before taking partial derivatives.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the boundary velocities: v(1.20)=1.80 m/sv(1.20) = 1.80\text{ m/s} and v(3.00)=1.44 m/sv(3.00) = 1.44\text{ m/s}, with Δt2=3.00−1.20=1.80 s\Delta t_2 = 3.00 - 1.20 = 1.80\text{ s}.

  2. Calculate the trapezoidal area: Δx2=1.80+1.442×1.80=1.62×1.80=2.916 m\Delta x_2 = \frac{1.80 + 1.44}{2} \times 1.80 = 1.62 \times 1.80 = 2.916\text{ m}.

  3. Sum the displacements: Δx=Δx1+Δx2=1.08+2.916=3.996 m≈4.00 m\Delta x = \Delta x_1 + \Delta x_2 = 1.08 + 2.916 = 3.996\text{ m} \approx 4.00\text{ m}.

  4. Express Δx\Delta x in terms of measured independent parameters: Δx=12(1.20)v1+12(1.80)(v1+v2)=1.50v1+0.90v2\Delta x = \frac{1}{2}(1.20)v_1 + \frac{1}{2}(1.80)(v_1 + v_2) = 1.50 v_1 + 0.90 v_2.

  5. Propagate uncertainty using quadrature: δ(Δx)=(1.50×0.05)2+(0.90×0.04)2=0.005625+0.001296≈0.083 m≈0.08 m\delta(\Delta x) = \sqrt{(1.50 \times 0.05)^2 + (0.90 \times 0.04)^2} = \sqrt{0.005625 + 0.001296} \approx 0.083\text{ m} \approx 0.08\text{ m}.

Final answer

Δx=(4.00±0.08) m\Delta x = (4.00 \pm 0.08)\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice shading areas under piecewise velocity-time curves to clearly distinguish rectangles, triangles, and trapezoids.

  • Review partial derivative uncertainty propagation in quadrature for multi-variable formulas.

OverviewACEpath Teacher's Diagnosis

03 The student directly adds the velocity uncertainties without multiplying them by the time intervals when calculating the total displacement uncertainty.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a=1.80−01.20=1.50 m/s2a = \frac{1.80 - 0}{1.20} = 1.50\text{ m/s}^2

  2. Step 2

    Δx1=12⋅1.80⋅1.20=1.08 m  ⟹  Δx2=12⋅(1.80+1.44)⋅1.80=2.916 m  ⟹  Δx=1.08+2.916=3.996 m\Delta x_1 = \frac{1}{2} \cdot 1.80 \cdot 1.20 = 1.08\text{ m} \implies \Delta x_2 = \frac{1}{2} \cdot (1.80 + 1.44) \cdot 1.80 = 2.916\text{ m} \implies \Delta x = 1.08 + 2.916 = 3.996\text{ m}

  3. Step 3

    δ(Δx)=0.05+0.04=0.09 m\delta(\Delta x) = 0.05 + 0.04 = 0.09\text{ m}

    Correct

    δ(Δx)=(∂Δx∂v1δv1)2+(∂Δx∂v2δv2)2=(1.50⋅0.05)2+(0.90⋅0.04)2≈0.08 m\delta(\Delta x) = \sqrt{\left(\frac{\partial \Delta x}{\partial v_1} \delta v_1\right)^2 + \left(\frac{\partial \Delta x}{\partial v_2} \delta v_2\right)^2} = \sqrt{(1.50 \cdot 0.05)^2 + (0.90 \cdot 0.04)^2} \approx 0.08\text{ m}

    You added the velocity uncertainties directly. Velocity uncertainties have units of m/s\text{m/s} and must be scaled by their respective time coefficients before propagating in quadrature to find an uncertainty in meters.

  4. Step 4

    Δx=(4.00±0.09) m\Delta x = (4.00 \pm 0.09)\text{ m}

    Correct

    Δx=(4.00±0.08) m\Delta x = (4.00 \pm 0.08)\text{ m}

    Your final reported displacement uncertainty inherits the calculation error from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the kinematic relationship a=ΔvΔta = \frac{\Delta v}{\Delta t} to find the slope of the first segment.

You correctly applied geometric area formulas (triangle and trapezoid) to determine the central value of total displacement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional Inconsistency in Uncertainty Propagation

You summed the raw velocity sensor uncertainties δv1+δv2\delta v_1 + \delta v_2 instead of expressing Δx\Delta x as a function of the measured variables and scaling each uncertainty by its partial derivative.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated uncertainty propagation as an unweighted sum of measurement tolerances, overlooking both dimensional consistency (multiplying velocity uncertainty by time to obtain displacement uncertainty) and the quadrature combination rule for independent variables.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Physical Dimensions of Uncertainties
  • Every uncertainty must match the physical dimensions of the quantity being reported: δ(Δx)\delta(\Delta x) must have units of meters, not m/s\text{m/s}.

  • Ensure each variable's uncertainty is multiplied by the magnitude of its sensitivity coefficient (partial derivative) before adding.

Propagate Independent Uncertainties in Quadrature
  • For a multi-variable function f(x,y)=c1x+c2yf(x, y) = c_1 x + c_2 y with independent random uncertainties, δf=(c1δx)2+(c2δy)2\delta f = \sqrt{(c_1 \delta x)^2 + (c_2 \delta y)^2}.

  • Collect like terms for each measured parameter (v1v_1 and v2v_2), compute each effective weight, and combine the independent contributions using the square root of the sum of squares.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the total displacement in terms of the independent measurements v1v_1 and v2v_2: Δx=12Δt1v1+12Δt2(v1+v2)=12(Δt1+Δt2)v1+12Δt2v2\Delta x = \frac{1}{2}\Delta t_1 v_1 + \frac{1}{2}\Delta t_2(v_1 + v_2) = \frac{1}{2}(\Delta t_1 + \Delta t_2)v_1 + \frac{1}{2}\Delta t_2 v_2.

  2. Substitute the time values: Δx=12(1.20+1.80)v1+12(1.80)v2=1.50v1+0.90v2\Delta x = \frac{1}{2}(1.20 + 1.80)v_1 + \frac{1}{2}(1.80)v_2 = 1.50 v_1 + 0.90 v_2.

  3. Calculate the uncertainty contributions: c1δv1=1.50 s×0.05 m/s=0.075 mc_1 \delta v_1 = 1.50\text{ s} \times 0.05\text{ m/s} = 0.075\text{ m}, and c2δv2=0.90 s×0.04 m/s=0.036 mc_2 \delta v_2 = 0.90\text{ s} \times 0.04\text{ m/s} = 0.036\text{ m}.

  4. Combine the independent terms in quadrature: δ(Δx)=(0.075 m)2+(0.036 m)2=0.005625+0.001296 m=0.006921 m≈0.0832 m≈0.08 m\delta(\Delta x) = \sqrt{(0.075\text{ m})^2 + (0.036\text{ m})^2} = \sqrt{0.005625 + 0.001296}\text{ m} = \sqrt{0.006921}\text{ m} \approx 0.0832\text{ m} \approx 0.08\text{ m}.

Final answer

Δx=(4.00±0.08) m\Delta x = (4.00 \pm 0.08)\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check that the units of your propagated uncertainty match the units of the target variable before combining.

  • Express the target quantity as a simplified function of independent measured variables to determine the proper multiplying coefficients for uncertainty propagation.

Lock it in

Similar question

01

A particle moves along the xx-axis. From t=1.0 st = 1.0\text{ s} to t=4.0 st = 4.0\text{ s}, its velocity changes linearly from 2.0 m/s2.0\text{ m/s} to 6.0 m/s6.0\text{ m/s}. Find the displacement of the particle during this time interval.

Answer

Δx=12.0 m\Delta x = 12.0\text{ m}. Using the trapezoid rule with duration Δt=4.0 s−1.0 s=3.0 s\Delta t = 4.0\text{ s} - 1.0\text{ s} = 3.0\text{ s}: Δx=2.0 m/s+6.0 m/s2(3.0 s)=4.0 m/s×3.0 s=12.0 m\Delta x = \frac{2.0\text{ m/s} + 6.0\text{ m/s}}{2}(3.0\text{ s}) = 4.0\text{ m/s} \times 3.0\text{ s} = 12.0\text{ m}.

02

A glider on an air track moves with velocity v1=(2.00±0.10) m/sv_1 = (2.00 \pm 0.10)\text{ m/s} at t=1.00 st = 1.00\text{ s} and slows down linearly to v2=(1.00±0.10) m/sv_2 = (1.00 \pm 0.10)\text{ m/s} at t=3.00 st = 3.00\text{ s}. Compute the displacement Δx\Delta x and its propagated uncertainty δ(Δx)\delta(\Delta x) assuming time measurements have negligible uncertainty.

Answer

Δx=(3.00±0.14) m\Delta x = (3.00 \pm 0.14)\text{ m}. The duration is Δt=3.00 s−1.00 s=2.00 s\Delta t = 3.00\text{ s} - 1.00\text{ s} = 2.00\text{ s}. Displacement is Δx=v1+v22Δt=1.00v1+1.00v2=3.00 m\Delta x = \frac{v_1 + v_2}{2}\Delta t = 1.00 v_1 + 1.00 v_2 = 3.00\text{ m}. In quadrature, δ(Δx)=(1.00×0.10)2+(1.00×0.10)2=0.02≈0.14 m\delta(\Delta x) = \sqrt{(1.00 \times 0.10)^2 + (1.00 \times 0.10)^2} = \sqrt{0.02} \approx 0.14\text{ m}.

03

A toy car accelerates from rest at t=0 st = 0\text{ s} to v1=(3.0±0.2) m/sv_1 = (3.0 \pm 0.2)\text{ m/s} at t=2.0 st = 2.0\text{ s}, then accelerates further to v2=(5.0±0.3) m/sv_2 = (5.0 \pm 0.3)\text{ m/s} at t=5.0 st = 5.0\text{ s} along piecewise linear segments. Express total displacement Δx\Delta x as a linear combination of v1v_1 and v2v_2, and calculate the total displacement with absolute uncertainty.

Answer

Δx=(15.0±0.6) m\Delta x = (15.0 \pm 0.6)\text{ m}. With Δt1=2.0 s\Delta t_1 = 2.0\text{ s} and Δt2=3.0 s\Delta t_2 = 3.0\text{ s}, Δx=12Δt1v1+v1+v22Δt2=2.5v1+1.5v2=2.5(3.0)+1.5(5.0)=15.0 m\Delta x = \frac{1}{2}\Delta t_1 v_1 + \frac{v_1 + v_2}{2}\Delta t_2 = 2.5 v_1 + 1.5 v_2 = 2.5(3.0) + 1.5(5.0) = 15.0\text{ m}. Propagating in quadrature gives δ(Δx)=(2.5×0.2)2+(1.5×0.3)2=0.25+0.2025=0.4525≈0.67 m\delta(\Delta x) = \sqrt{(2.5 \times 0.2)^2 + (1.5 \times 0.3)^2} = \sqrt{0.25 + 0.2025} = \sqrt{0.4525} \approx 0.67\text{ m}, giving (15.0±0.7) m(15.0 \pm 0.7)\text{ m} (or (15.0±0.67) m(15.0 \pm 0.67)\text{ m}).

Loading workspace…