Resources
A solid block of uniform wood (density ) is carved into the shape of a truncated pyramid (frustum) of vertical height . Its top flat face has an area of and its bottom flat face has an area of , giving it a total volume of . A student assumes that because the block's mass is unchanged, the pressure it exerts on a table is identical regardless of which face it rests on. Calculate: (a) the contact pressure when resting on its smaller top face ; (b) the contact pressure when resting on its larger bottom face ; and (c) the ratio , showing how the local concentration of normal force refutes the student's assumption. Take .
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Determine the mass and downward gravitational force of the block
The mass of the wooden block is related to its density and total volume by:
Substitute the given values:
On a horizontal table, the normal force exerted by the block on the table equals its weight :
This total force remains constant regardless of the block's orientation.
Calculate the contact pressure on the smaller face
Pressure is defined as the perpendicular force distributed over an area:
When resting on its smaller top face ():
Calculate the contact pressure on the larger face
When resting on its larger base ():
Evaluate the ratio and address the misconception
Taking the ratio of the two pressures:
Key Pitfall: A common mistake is conflating total force (weight) with pressure. While the downward gravitational force is identical in both orientations, pressure depends inversely on contact area (). Resting the block on the smaller face concentrates the same total weight into less than half the area, producing a pressure times higher.
Typical errors
01 The student confuses mass with weight by omitting acceleration due to gravity g in the pressure formula P = F/A.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Pressure is defined as force per unit area (), not mass per unit area. You need to multiply the mass by to get the normal force (weight) acting on the table.
- Step 3Correct
Here again, you substituted mass instead of the downward gravitational force into the numerator.
- Step 4
- Step 5
The ratio is 2.25, so pressure depends on area despite the same mass.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the density and volume formula to find the mass of the block.
You correctly set up the ratio of the two pressures and recognized that pressure changes inversely with area.
You clearly stated the final conceptual conclusion refuting the misconception.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou used mass in kilograms in place of weight force in newtons in the formula , resulting in pressure values expressed as rather than (pascals).
REASONING PATH
Your ACEpath teacher’s suggested approach- Check SI Units for Force and Pressure
Pressure is defined as in pascals ().
Always convert a resting object's mass to its weight before dividing by contact area.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the weight of the block: .
Calculate : .
Calculate : .
(a) ; (b) ; (c)
02 The student inverts the ratio of pressures as P₁/P₂ = A₁/A₂ by incorrectly assuming pressure is directly proportional to contact area.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
(or )
Because pressure is inversely proportional to contact area (), the ratio of pressures is , not . A smaller contact area concentrates the weight and yields a higher pressure.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly computed the mass and weight of the wooden block using density, volume, and gravitational acceleration.
You successfully evaluated the individual pressures and using the formula .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set up the ratio using the direct area fraction rather than dividing your already calculated pressure values .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated pressure as directly proportional to contact area instead of recognizing that for a constant applied force, pressure is inversely proportional to contact area ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Inverse Proportionality of Pressure
For a constant normal force , pressure satisfies , meaning and .
Always verify that the smaller surface area corresponds to the greater pressure before writing a ratio.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that .
Substitute the base areas: .
Alternatively, divide your calculated pressures: .
Conclude that resting on the smaller face produces a pressure times greater, refuting the assumption.
(a) ; (b) ; (c)
03 The student multiplies the normal force by the area instead of dividing by it when calculating pressure.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Pressure is defined as perpendicular force per unit area (), not force multiplied by area.
- Step 3Correct
Here again, pressure requires dividing the weight by the contact area rather than multiplying.
- Step 4Correct
Because the pressures were computed by multiplying by area rather than dividing, the ratio was inverted, reversing the physical conclusion.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the relationship to calculate the mass of the truncated pyramid.
You accurately found the total gravitational force acting on the support table.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated pressure as the product of force and contact area () rather than force distributed over contact area (). Pressure measures force concentration, meaning a smaller contact area produces a higher pressure for the same normal force.
REASONING PATH
Your ACEpath teacher’s suggested approach- Definition and Units of Pressure
Pressure is normal force divided by area: . In SI units, .
Always check your units: multiplying yields , not Pascals ().
- Inverse Relationship Between Area and Pressure
For a constant normal force, pressure is inversely proportional to contact area ().
Verify your qualitative expectation: resting on a smaller area concentrates the force and must yield a larger pressure.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute .
Compute .
Compute the ratio: .
(a) ; (b) ; (c)
Lock it in
What is the primary difference between mass and force when computing contact pressure on a flat surface?
Pressure requires the normal force ( in newtons), not mass ( in kilograms). Remember: .
Similar question
A solid rectangular metal block has a mass of . It has dimensions . Calculate the minimum contact pressure it can exert when resting flat on a horizontal floor. Take .
Answer
. Key steps: Downward force . Minimum pressure occurs on the largest face area . Thus, .
A cylindrical column of uniform granite (density ) stands upright with a height of and cross-sectional area . Calculate: (a) the weight of the column; (b) the pressure exerted on the ground beneath it. Take .
Answer
(a) ; (b) . Key steps: Volume . Mass . Weight . Pressure .
A solid cone of uniform material has base radius , vertical height , and mass . When standing upright on its circular base, find the average pressure on the tabletop. If inverted and supported on a flat circular pedestal of radius at its tip, find the ratio of pedestal pressure to base pressure . Take .
Answer
; ratio . Key steps: Weight . Base area , so . Pedestal area . Since normal force is identical in both configurations, the pressure ratio is .