Resources
In a physics laboratory experiment to calibrate the kinetic friction between different materials, a block of mass sits on a level benchtop and is connected by a lightweight, inextensible string running over an ideal, frictionless pulley to a hanging mass . A dual-range photogate timer measures the acceleration of the system as it moves from rest, yielding . Taking : (a) Construct the coupled dynamic equations of motion and calculate the tension in the connecting string. (b) Determine the experimental magnitude of the kinetic frictional force acting on the block. (c) Calculate the experimental coefficient of kinetic friction between the block and the benchtop.
Answer and steps
Final answer
(a) ; (b) ; (c) .
Steps
(a) Dynamic Equations of Motion and String Tension
First, identify the forces acting on each object and set up a coordinate system along the direction of motion:
-
For the hanging mass ():
- The downward gravitational force is .
- The upward tension from the string is .
- Choosing the downward direction as positive:
-
For the block on the benchtop ():
- Vertically, the normal force balances gravity: .
- Horizontally, taking the direction of acceleration toward the pulley as positive, the tension pulls forward while kinetic friction opposes the motion:
Using the equation for , solve for the tension :
Substitute the given values:
(b) Magnitude of the Kinetic Frictional Force
Using the horizontal equation of motion for block :
Substitute the tension and the inertia term :
Common Pitfall: Avoid calculating as simply . Because the system is accelerating downward, the tension in the string must be strictly less than the weight of the hanging mass ().
(c) Coefficient of Kinetic Friction
The kinetic frictional force is related to the normal force by:
From vertical equilibrium for the block on the horizontal surface:
Solving for :
Typical errors
01 The student assumes the tension in the string equals the static weight of the hanging mass rather than accounting for its downward acceleration.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the hanging mass accelerates downward at , the net force on it equals , not zero. Setting overestimates the string tension.
- Step 2Correct
Your algebraic relation is completely correct, but substituting your earlier tension value of carried the error into this step.
- Step 3Correct
You calculated the normal force correctly and applied properly, but propagating gave an incorrect coefficient.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied Newton's second law along the benchtop to relate string tension, kinetic friction, and mass acceleration.
You accurately determined the normal force supporting the sliding block.
You properly used the definition of the kinetic friction coefficient as the ratio of friction to normal force.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated the upward tension directly to the hanging weight () instead of setting the net vertical force equal to .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTreating a moving, accelerating hanging mass in a coupled system as if it were stationary in static equilibrium.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Net Force for Accelerating Bodies
For an object accelerating at , , which equals zero only if .
Always draw a free-body diagram and write along the direction of motion before substituting numbers.
- Tension in a Downward-Accelerating Load
When a suspended load accelerates downward, gravity must exceed tension: .
Verify physically that string tension is less than the hanging weight whenever the mass accelerates downward.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply Newton's second law to the downward-accelerating hanging mass: .
Solve for the tension: .
Substitute into the benchtop equation: .
Compute the friction coefficient: .
(a) ; (b) ; (c)
02 The student adds the acceleration term instead of subtracting it when setting up the net force on the hanging mass, writing T - m2*g = m2*a.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the hanging mass accelerates downward, gravity must exceed the string tension (). Writing assumes an upward acceleration, leading to instead of .
- Step 2Correct
Your algebraic formula is completely correct, but substituting your earlier value of carried over the error to give instead of .
- Step 3Correct
You determined the normal force and applied correctly, but the propagated value of led to instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly formulated the horizontal dynamic equation for the sliding block.
You correctly calculated the vertical normal force on the benchtop as .
You properly applied the definition of kinetic friction coefficient .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the hanging mass as if it were accelerating upward instead of downward.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the sign convention between the direction of motion and the coordinate axes: when choosing downward as positive for a descending mass, the net force equation must be , meaning tension must be less than gravity ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Physical Reality Check for Accelerating Hanging Masses
For a mass accelerating downward, gravity pulls harder than tension (), so . If tension were greater than weight (), the mass would accelerate upward.
Before calculating, compare your tension formula to weight: if the mass descends and speeds up, ensure .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the downward direction as positive for the hanging mass : .
Solve for string tension: .
Substitute into the block's equation: .
Compute the friction coefficient: .
(a) ; (b) ; (c)
03 The student calculates the normal force using the total mass of the system rather than only the mass resting on the benchtop.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The normal force comes strictly from the contact between the benchtop and the block resting on it (). The hanging mass is supported vertically by the string, not by the benchtop, so it must not be added to the normal force calculation.
- Step 4Correct
Your formula is correct, but your numerical answer was skewed by the incorrect normal force from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly isolated the hanging mass and accounted for downward acceleration when calculating string tension.
You correctly related horizontal net force to the acceleration of the block to find the friction force.
You correctly identified the definition of the coefficient of kinetic friction as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou summed both masses to compute the contact normal force instead of isolating only the mass pressing against the surface.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing system-level inertia with local surface contact forces. Normal force is a contact force determined by Newton's laws on the specific isolated body at that interface, not the total mass of the connected system.
REASONING PATH
Your ACEpath teacher’s suggested approach- Draw an isolated free-body diagram for contact forces
Normal force balances only the perpendicular forces acting on the specific body in contact with the surface: for a flat horizontal bench.
Before computing , sketch a free-body diagram containing only the object touching that surface.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the normal force on block : .
Compute the coefficient of kinetic friction using the correct normal force: .
(a) ; (b) ; (c)
Lock it in
A hanging mass accelerates downward with acceleration on a string. How does the string tension compare to the weight ?
. Because the mass accelerates downward, gravity must exceed the upward tension.
Similar question
A cart on a frictionless horizontal table is connected by a cord over a frictionless pulley to a hanging mass of . Taking , find the system acceleration and the tension in the cord.
Answer
, . Key steps: Coupled equations are and . Adding gives . Then (or ).
A block slides on a rough bench with kinetic friction force . It is pulled by a cord passing over a pulley to a hanging mass of . Taking , determine the system acceleration and the cord tension .
Answer
, . Key steps: For the block, . For the hanging mass, . Adding the equations yields . Then .
In a lab trial, a horizontal block of mass is connected to a hanging mass . From rest, the hanging mass falls in . Taking , determine the tension and the coefficient of kinetic friction between the block and the table.
Answer
, . Key steps: From kinematics, . For the hanging mass, . For the block, . The normal force is . Thus .