Resources

A remote-controlled maglev sled travels along a linear track with its initial velocity at t=0 st = 0\text{ s} being v0=−6.0 m/sv_0 = -6.0\text{ m/s}. Its acceleration is given by the piece-wise continuous graph: for 0 s≤t≤4.0 s0\text{ s} \le t \le 4.0\text{ s}, a(t)a(t) increases linearly from 0 m/s20\text{ m/s}^2 to +4.0 m/s2+4.0\text{ m/s}^2 such that a(t)=(1.0 m/s3)ta(t) = (1.0\text{ m/s}^3)t; for t>4.0 st > 4.0\text{ s}, the acceleration remains constant at +4.0 m/s2+4.0\text{ m/s}^2. (a) Determine the exact critical threshold time tturnt_{\text{turn}} at which the sled momentarily halts to reverse its direction of motion (impending reversal where v=0 m/sv = 0\text{ m/s}). (b) Calculate the net displacement Δx\Delta x of the sled from t=0 st = 0\text{ s} up to this turnaround instant tturnt_{\text{turn}}.

Answer and steps

Final answer

(a) tturn=3.46 st_{\text{turn}} = 3.46\text{ s}; (b) Δx=−13.9 m\Delta x = -13.9\text{ m}

Steps

Part (a): Finding the Turnaround Time tturnt_{\text{turn}}

  1. Relate velocity to acceleration: The sled momentarily stops to reverse direction when its velocity reaches zero (v=0 m/sv = 0\text{ m/s}). Velocity is the integral of acceleration over time: v(t)=v0+∫0ta(t′) dt′v(t) = v_0 + \int_0^t a(t')\,dt'
  2. Evaluate velocity for the first interval (0 s≤t≤4.0 s0\text{ s} \le t \le 4.0\text{ s}): Given v0=−6.0 m/sv_0 = -6.0\text{ m/s} and a(t)=1.0 ta(t) = 1.0\,t: v(t)=−6.0+∫0t1.0 t′ dt′=−6.0+12t2v(t) = -6.0 + \int_0^t 1.0\,t'\,dt' = -6.0 + \frac{1}{2}t^2
  3. Solve for v(t)=0v(t) = 0: −6.0+12t2=0  ⟹  12t2=6.0  ⟹  t2=12-6.0 + \frac{1}{2}t^2 = 0 \implies \frac{1}{2}t^2 = 6.0 \implies t^2 = 12 tturn=12 s≈3.464 s≈3.46 st_{\text{turn}} = \sqrt{12}\text{ s} \approx 3.464\text{ s} \approx 3.46\text{ s}

    Pitfall to avoid: Standard kinematic formulas like v=v0+atv = v_0 + at assume constant acceleration and cannot be used here because acceleration changes linearly with time. Additionally, verify that tturn≤4.0 st_{\text{turn}} \le 4.0\text{ s}; since 3.46 s<4.0 s3.46\text{ s} < 4.0\text{ s}, the sled reverses direction within this first phase, and the constant-acceleration segment (t>4.0 st > 4.0\text{ s}) does not need to be integrated.


Part (b): Net Displacement Δx\Delta x up to tturnt_{\text{turn}}

  1. Relate displacement to velocity: Displacement Δx\Delta x is the definite integral of velocity with respect to time: Δx=∫0tturnv(t) dt\Delta x = \int_0^{t_{\text{turn}}} v(t)\,dt
  2. Substitute v(t)v(t) and integrate: Δx=∫012(−6.0+12t2)dt=[−6.0t+16t3]012\Delta x = \int_0^{\sqrt{12}} \left(-6.0 + \frac{1}{2}t^2\right) dt = \left[ -6.0t + \frac{1}{6}t^3 \right]_0^{\sqrt{12}}
  3. Calculate the numerical value: Δx=−6.012+16(12)3\Delta x = -6.0\sqrt{12} + \frac{1}{6}(\sqrt{12})^3 Since (12)3=1212(\sqrt{12})^3 = 12\sqrt{12}: Δx=−6.012+12612=−6.012+2.012=−4.012 m\Delta x = -6.0\sqrt{12} + \frac{12}{6}\sqrt{12} = -6.0\sqrt{12} + 2.0\sqrt{12} = -4.0\sqrt{12}\text{ m} Δx=−4.0(23)=−83 m≈−13.86 m≈−13.9 m\Delta x = -4.0(2\sqrt{3}) = -8\sqrt{3}\text{ m} \approx -13.86\text{ m} \approx -13.9\text{ m}

The negative sign confirms that the sled displaced 13.9 m13.9\text{ m} in the negative direction before stopping momentarily to reverse.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to integrate acceleration and incorrectly uses v = v0 + a*t with a = t, giving v = -6.0 + t² instead of dividing by 2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v(t)=v0+a(t)t=−6.0+t2v(t) = v_0 + a(t)t = -6.0 + t^2

    Correct

    v(t)=v0+∫0ta(t′) dt′=−6.0+∫0tt′ dt′=−6.0+12t2v(t) = v_0 + \int_0^t a(t')\,dt' = -6.0 + \int_0^t t'\,dt' = -6.0 + \frac{1}{2}t^2

    Because the acceleration a(t)=(1.0 m/s3)ta(t) = (1.0\text{ m/s}^3)t varies with time, standard kinematic formulas such as v=v0+atv = v_0 + at do not apply. You need to integrate acceleration with respect to time, giving ∫t dt=12t2\int t\,dt = \frac{1}{2}t^2 rather than multiplying a(t)a(t) by tt.

  2. Step 2

    −6.0+t2=0  ⟹  t2=6.0  ⟹  tturn=6 s≈2.45 s-6.0 + t^2 = 0 \implies t^2 = 6.0 \implies t_{\text{turn}} = \sqrt{6}\text{ s} \approx 2.45\text{ s}

    Correct

    −6.0+12t2=0  ⟹  t2=12  ⟹  tturn=12 s≈3.46 s-6.0 + \frac{1}{2}t^2 = 0 \implies t^2 = 12 \implies t_{\text{turn}} = \sqrt{12}\text{ s} \approx 3.46\text{ s}

    You correctly identified that the turnaround occurs when v(t)=0v(t) = 0 and solved the resulting quadratic equation accurately, but your result was affected by the missing factor of 12\frac{1}{2} from Step 1.

  3. Step 3

    Δx=∫06(−6.0+t2) dt=[−6.0t+t33]06=−46 m≈−9.80 m\Delta x = \int_0^{\sqrt{6}} (-6.0 + t^2)\,dt = \left[-6.0t + \frac{t^3}{3}\right]_0^{\sqrt{6}} = -4\sqrt{6}\text{ m} \approx -9.80\text{ m}

    Correct

    Δx=∫012(−6.0+12t2)dt=[−6.0t+t36]012=−412 m≈−13.9 m\Delta x = \int_0^{\sqrt{12}} \left(-6.0 + \frac{1}{2}t^2\right)dt = \left[-6.0t + \frac{t^3}{6}\right]_0^{\sqrt{12}} = -4\sqrt{12}\text{ m} \approx -13.9\text{ m}

    Your integration technique and boundary evaluation were executed cleanly, but the integral propagated the incorrect velocity function and upper limit from the earlier steps.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that turnaround corresponds to the instant v(t)=0v(t) = 0.

You set up the displacement correctly as the definite integral of velocity over time.

You evaluated polynomial integrals and radical bounds with sound algebraic precision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misuse of Constant-Acceleration Formulas for Non-Constant Acceleration

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted a time-dependent acceleration function a(t)=ta(t) = t directly into the constant-acceleration formula v=v0+atv = v_0 + at rather than using the definition of acceleration as a derivative, a(t)=dvdta(t) = \frac{dv}{dt}, which requires integration v(t)=v0+∫a(t) dtv(t) = v_0 + \int a(t)\,dt.

REASONING PATH
Your ACEpath teacher’s suggested approach
Constant vs. Variable Acceleration Check
  • The kinematic formula v(t)=v0+atv(t) = v_0 + at is valid only when aa is strictly constant. When a=a(t)a = a(t), use v(t)=v0+∫0ta(t′) dt′v(t) = v_0 + \int_0^t a(t')\,dt'.

  • Check the given acceleration equation or graph: if it depends on tt, immediately write down an integral instead of standard kinematic formulas.

Polynomial Integration Rule
  • ∫tn dt=tn+1n+1+C\int t^n\,dt = \frac{t^{n+1}}{n+1} + C. Specifically, ∫t dt=12t2\int t\,dt = \frac{1}{2}t^2, not t2t^2.

  • Always remember to divide by the new exponent when integrating powers of tt.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Integrate a(t)=1.0ta(t) = 1.0t to get velocity: v(t)=−6.0+∫0tt′ dt′=−6.0+12t2v(t) = -6.0 + \int_0^t t'\,dt' = -6.0 + \frac{1}{2}t^2.

  2. Set v(t)=0v(t) = 0 to find the turnaround time: −6.0+12t2=0  ⟹  t2=12  ⟹  tturn=12 s≈3.46 s-6.0 + \frac{1}{2}t^2 = 0 \implies t^2 = 12 \implies t_{\text{turn}} = \sqrt{12}\text{ s} \approx 3.46\text{ s}. Note that 3.46 s≤4.0 s3.46\text{ s} \le 4.0\text{ s}, so the sled reverses before the second acceleration phase.

  3. Integrate v(t)v(t) from 00 to 12\sqrt{12}: Δx=∫012(−6.0+12t2)dt=[−6.0t+t36]012\Delta x = \int_0^{\sqrt{12}} \left(-6.0 + \frac{1}{2}t^2\right)dt = \left[-6.0t + \frac{t^3}{6}\right]_0^{\sqrt{12}}.

  4. Evaluate at t=12t = \sqrt{12}: Δx=−6.012+12126=−4.012=−83 m≈−13.9 m\Delta x = -6.0\sqrt{12} + \frac{12\sqrt{12}}{6} = -4.0\sqrt{12} = -8\sqrt{3}\text{ m} \approx -13.9\text{ m}.

Final answer

(a) tturn=12 s≈3.46 st_{\text{turn}} = \sqrt{12}\text{ s} \approx 3.46\text{ s}; (b) Δx=−83 m≈−13.9 m\Delta x = -8\sqrt{3}\text{ m} \approx -13.9\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review calculus-based kinematics definitions: v(t)=dxdtv(t) = \frac{dx}{dt} and a(t)=dvdta(t) = \frac{dv}{dt}.

  • Practice distinguishing between constant-acceleration problems where kinematic formulas apply and variable-acceleration problems requiring integration.

  • Work through the targeted flashcards and practice problems below to master non-constant acceleration.

OverviewACEpath Teacher's Diagnosis

02 The student uses the constant acceleration kinematic formula assuming acceleration is constant at 4.0 m/s² over the whole interval.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v=v0+at  ⟹  0=−6.0+4.0t  ⟹  4.0t=6.0  ⟹  tturn=1.5 sv = v_0 + at \implies 0 = -6.0 + 4.0t \implies 4.0t = 6.0 \implies t_{\text{turn}} = 1.5\text{ s}

    Correct

    v(t)=v0+∫0ta(t′) dt′=−6.0+∫0t1.0t′ dt′=−6.0+12t2  ⟹  −6.0+12t2=0  ⟹  tturn=12 s≈3.46 sv(t) = v_0 + \int_0^t a(t')\,dt' = -6.0 + \int_0^t 1.0t'\,dt' = -6.0 + \frac{1}{2}t^2 \implies -6.0 + \frac{1}{2}t^2 = 0 \implies t_{\text{turn}} = \sqrt{12}\text{ s} \approx 3.46\text{ s}

    You assumed constant acceleration (a=4.0 m/s2a = 4.0\text{ m/s}^2) and used v=v0+atv = v_0 + at. However, for 0≤t≤4.0 s0 \le t \le 4.0\text{ s}, acceleration varies with time according to a(t)=1.0ta(t) = 1.0t. Finding velocity requires integrating acceleration with respect to time.

  2. Step 2

    v2=v02+2aΔx  ⟹  0=(−6.0)2+2(4.0)Δx  ⟹  36+8.0Δx=0  ⟹  Δx=−4.5 mv^2 = v_0^2 + 2a\Delta x \implies 0 = (-6.0)^2 + 2(4.0)\Delta x \implies 36 + 8.0\Delta x = 0 \implies \Delta x = -4.5\text{ m}

    Correct

    Δx=∫0tturnv(t) dt=∫012(−6.0+12t2)dt=[−6.0t+16t3]012=−83 m≈−13.9 m\Delta x = \int_0^{t_{\text{turn}}} v(t)\,dt = \int_0^{\sqrt{12}} \left(-6.0 + \frac{1}{2}t^2\right)dt = \left[-6.0t + \frac{1}{6}t^3\right]_0^{\sqrt{12}} = -8\sqrt{3}\text{ m} \approx -13.9\text{ m}

    You used the constant-acceleration formula v2=v02+2aΔxv^2 = v_0^2 + 2a\Delta x with a=4.0 m/s2a = 4.0\text{ m/s}^2. Because acceleration changes with time, displacement must be calculated by integrating the velocity function v(t)v(t) from t=0t = 0 to t=tturnt = t_{\text{turn}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set the condition for turning around as v=0 m/sv = 0\text{ m/s}.

You correctly identified the initial velocity v0=−6.0 m/sv_0 = -6.0\text{ m/s}.

You accurately solved the linear algebraic equations you set up.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inappropriate use of constant-acceleration kinematic formulas for time-varying acceleration

No, this is a conceptual misunderstanding about the domain of applicability of standard kinematic equations.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the acceleration value at t=4.0 st = 4.0\text{ s} (4.0 m/s24.0\text{ m/s}^2) could be treated as a constant acceleration across the entire interval, leading you to apply the constant-acceleration kinematic formulas (SUVAT) rather than calculus-based integration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Constant vs. Variable Acceleration Check
  • Standard kinematic formulas (v=v0+atv = v_0 + at, Δx=v0t+12at2\Delta x = v_0 t + \frac{1}{2}at^2, v2=v02+2aΔxv^2 = v_0^2 + 2a\Delta x) are valid only when acceleration is strictly constant.

  • Before choosing a kinematic equation, inspect a(t)a(t). If acceleration depends on time, position, or velocity, immediately set up integrals: v(t)=v0+∫a dtv(t) = v_0 + \int a\,dt and x(t)=x0+∫v dtx(t) = x_0 + \int v\,dt.

Interval Verification
  • When a problem defines piecewise functions, verify which time regime your critical event falls into.

  • After solving for tturn=12 s≈3.46 st_{\text{turn}} = \sqrt{12}\text{ s} \approx 3.46\text{ s}, check that 3.46 s≤4.0 s3.46\text{ s} \le 4.0\text{ s} to confirm that the motion remained within the first piecewise interval.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express velocity as v(t)=v0+∫0ta(t′) dt′=−6.0+∫0t1.0t′ dt′=−6.0+12t2v(t) = v_0 + \int_0^t a(t')\,dt' = -6.0 + \int_0^t 1.0t'\,dt' = -6.0 + \frac{1}{2}t^2.

  2. Set v(t)=0v(t) = 0 to find the turnaround time: −6.0+12t2=0  ⟹  t2=12  ⟹  tturn=12 s≈3.46 s-6.0 + \frac{1}{2}t^2 = 0 \implies t^2 = 12 \implies t_{\text{turn}} = \sqrt{12}\text{ s} \approx 3.46\text{ s}.

  3. Integrate v(t)v(t) to find displacement: Δx=∫012(−6.0+12t2)dt=[−6.0t+16t3]012\Delta x = \int_0^{\sqrt{12}} \left(-6.0 + \frac{1}{2}t^2\right)dt = \left[-6.0t + \frac{1}{6}t^3\right]_0^{\sqrt{12}}.

  4. Evaluate the definite integral: Δx=−6.012+16(1212)=−4.012=−83 m≈−13.9 m\Delta x = -6.0\sqrt{12} + \frac{1}{6}(12\sqrt{12}) = -4.0\sqrt{12} = -8\sqrt{3}\text{ m} \approx -13.9\text{ m}.

Final answer

(a) tturn=3.46 st_{\text{turn}} = 3.46\text{ s}; (b) Δx=−13.9 m\Delta x = -13.9\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of kinematic formulas from calculus to reinforce why constant acceleration is a necessary condition.

  • Practice setting up definite integrals for piecewise acceleration functions.

  • Always write down the explicit functional form of acceleration a(t)a(t) before selecting a solution method.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly assumes turnaround happens in the second region where a = 4.0 m/s², ignoring that velocity already crosses zero before t = 4.0 s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v(4)=−6.0+0.5(4)2=2.0 m/sv(4) = -6.0 + 0.5(4)^2 = 2.0\text{ m/s}

  2. Step 2

    v(t)=2.0+4.0(t−4)=0  ⟹  4.0(t−4)=−2.0  ⟹  t−4=−0.5  ⟹  tturn=4.5 sv(t) = 2.0 + 4.0(t-4) = 0 \implies 4.0(t-4) = -2.0 \implies t-4 = -0.5 \implies t_{\text{turn}} = 4.5\text{ s}

    Correct

    −6.0+0.5t2=0  ⟹  t2=12  ⟹  tturn=12 s≈3.46 s-6.0 + 0.5t^2 = 0 \implies t^2 = 12 \implies t_{\text{turn}} = \sqrt{12}\text{ s} \approx 3.46\text{ s}

    Because v(0)=−6.0 m/sv(0) = -6.0\text{ m/s} and v(4)=+2.0 m/sv(4) = +2.0\text{ m/s}, the velocity crossed zero within the first interval (0 s≤t≤4.0 s0\text{ s} \le t \le 4.0\text{ s}). For t>4.0 st > 4.0\text{ s}, the sled has positive velocity and positive acceleration, so velocity continues to increase and never reaches zero. You should set the velocity formula for the first interval equal to zero to find tturn=12 s≈3.46 st_{\text{turn}} = \sqrt{12}\text{ s} \approx 3.46\text{ s}.

  3. Step 3

    x(4)=∫04(−6.0+0.5t2) dt=[−6.0t+t36]04=−13.33 m  ⟹  Δx2=2.0(0.5)+0.5(4.0)(0.5)2=1.5 m  ⟹  Δx=−13.33+1.5=−11.83 mx(4) = \int_0^4 (-6.0 + 0.5t^2)\,dt = \left[-6.0t + \frac{t^3}{6}\right]_0^4 = -13.33\text{ m} \implies \Delta x_2 = 2.0(0.5) + 0.5(4.0)(0.5)^2 = 1.5\text{ m} \implies \Delta x = -13.33 + 1.5 = -11.83\text{ m}

    Correct

    Δx=∫012(−6.0+0.5t2) dt=[−6.0t+16t3]012=−83 m≈−13.9 m\Delta x = \int_0^{\sqrt{12}} (-6.0 + 0.5t^2)\,dt = \left[-6.0t + \frac{1}{6}t^3\right]_0^{\sqrt{12}} = -8\sqrt{3}\text{ m} \approx -13.9\text{ m}

    Your integration technique was sound, but your calculation integrated past the turnaround instant up to an incorrect time t=4.5 st = 4.5\text{ s}. Integrating v(t)v(t) from t=0 st = 0\text{ s} to t=12 st = \sqrt{12}\text{ s} gives the correct net displacement of −13.9 m-13.9\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly integrated the time-dependent acceleration a(t)=1.0ta(t) = 1.0t to obtain v(t)=−6.0+0.5t2v(t) = -6.0 + 0.5t^2.

You correctly applied definite integration to find displacement from velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong Interval for Root Condition

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed the turnaround point must lie in the second motion regime (t>4.0 st > 4.0\text{ s}), overlooking that a sign change from v(0)=−6.0 m/sv(0) = -6.0\text{ m/s} to v(4)=+2.0 m/sv(4) = +2.0\text{ m/s} guarantees the zero-crossing occurs inside the first regime (t<4.0 st < 4.0\text{ s}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Locate zero-crossings using boundary values
  • If a continuous velocity function satisfies v(t1)<0v(t_1) < 0 and v(t2)>0v(t_2) > 0, by the Intermediate Value Theorem v(t)=0v(t) = 0 must occur at some time tt between t1t_1 and t2t_2.

  • Compare v(0)v(0) and v(4)v(4). Since −6.0<0-6.0 < 0 and +2.0>0+2.0 > 0, set the velocity expression for that same interval equal to zero.

Check physical feasibility of solutions
  • In a regime where v(t)>0v(t) > 0 and a(t)>0a(t) > 0, velocity is strictly increasing and cannot drop to zero.

  • Before writing v(t)=0v(t) = 0 for t>4 st > 4\text{ s}, check whether the sled is already moving forward and accelerating forward.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set velocity to zero in the first regime: v(t)=−6.0+0.5t2=0v(t) = -6.0 + 0.5t^2 = 0.

  2. Solve for tt: 0.5t2=6.0  ⟹  t2=12  ⟹  tturn=12 s≈3.46 s0.5t^2 = 6.0 \implies t^2 = 12 \implies t_{\text{turn}} = \sqrt{12}\text{ s} \approx 3.46\text{ s}.

  3. Integrate velocity from 00 to 12 s\sqrt{12}\text{ s} to find net displacement: Δx=∫012(−6.0+0.5t2) dt\Delta x = \int_0^{\sqrt{12}} (-6.0 + 0.5t^2)\,dt.

  4. Evaluate the definite integral: Δx=[−6.0t+16t3]012=−6.012+2.012=−4.012 m≈−13.9 m\Delta x = \left[-6.0t + \frac{1}{6}t^3\right]_0^{\sqrt{12}} = -6.0\sqrt{12} + 2.0\sqrt{12} = -4.0\sqrt{12}\text{ m} \approx -13.9\text{ m}.

Final answer

(a) tturn=3.46 st_{\text{turn}} = 3.46\text{ s}; (b) Δx=−13.9 m\Delta x = -13.9\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always evaluate velocity at interval endpoints first to identify which segment contains the root v=0v = 0.

  • When a solution yields a time outside its valid interval (such as t−4=−0.5 st - 4 = -0.5\text{ s}), treat this as an indicator that the event occurred in an earlier interval rather than adjusting the sign.

Lock it in

Similar question

01

A particle starts from rest at t=0 st = 0\text{ s} and moves in a straight line with time-dependent acceleration a(t)=3.0t2 m/s2a(t) = 3.0t^2\text{ m/s}^2. Find its velocity at t=2.0 st = 2.0\text{ s}.

Answer

v(2.0)=8.0 m/sv(2.0) = 8.0\text{ m/s}. Key step: v(t)=v0+∫0t3.0t′2 dt′=0+[t′3]0t=t3v(t) = v_0 + \int_0^t 3.0t'^2\,dt' = 0 + \left[t'^3\right]_0^t = t^3. Thus, v(2.0)=(2.0)3=8.0 m/sv(2.0) = (2.0)^3 = 8.0\text{ m/s}.

02

A toy car moving along an xx-axis has initial velocity v0=−8.0 m/sv_0 = -8.0\text{ m/s} at t=0 st = 0\text{ s}. Its acceleration is a(t)=2.0t m/s2a(t) = 2.0t\text{ m/s}^2. (a) At what time tstopt_{\text{stop}} does the car momentarily stop? (b) What is its position change Δx\Delta x at that moment?

Answer

(a) tstop=2.83 st_{\text{stop}} = 2.83\text{ s} (or 8 s\sqrt{8}\text{ s}); (b) Δx=−15.1 m\Delta x = -15.1\text{ m} (or −1683 m-\frac{16\sqrt{8}}{3}\text{ m}). Key steps: v(t)=−8.0+∫0t2.0t′ dt′=−8.0+t2v(t) = -8.0 + \int_0^t 2.0t'\,dt' = -8.0 + t^2. Setting v=0v = 0 yields t=8 s≈2.83 st = \sqrt{8}\text{ s} \approx 2.83\text{ s}. Integrating v(t)v(t) gives Δx=[−8.0t+t33]08=−88+883=−1683≈−15.1 m\Delta x = \left[-8.0t + \frac{t^3}{3}\right]_0^{\sqrt{8}} = -8\sqrt{8} + \frac{8\sqrt{8}}{3} = -\frac{16\sqrt{8}}{3} \approx -15.1\text{ m}.

03

A rover moves along a track with initial velocity v0=−10.0 m/sv_0 = -10.0\text{ m/s}. Its acceleration is a(t)=1.5t m/s2a(t) = 1.5t\text{ m/s}^2 for 0≤t≤4.0 s0 \le t \le 4.0\text{ s}, and remains constant at 6.0 m/s26.0\text{ m/s}^2 for t>4.0 st > 4.0\text{ s}. Determine the turnaround time tturnt_{\text{turn}} where v=0 m/sv = 0\text{ m/s}.

Answer

tturn=4.33 st_{\text{turn}} = 4.33\text{ s}. Key steps: For t≤4.0 st \le 4.0\text{ s}, v(t)=−10.0+1.52t2=−10.0+0.75t2v(t) = -10.0 + \frac{1.5}{2}t^2 = -10.0 + 0.75t^2. At t=4.0 st = 4.0\text{ s}, v(4.0)=−10.0+0.75(16)=−10.0+12.0=+2.0 m/sv(4.0) = -10.0 + 0.75(16) = -10.0 + 12.0 = +2.0\text{ m/s}. Since v(4.0)>0v(4.0) > 0, the turnaround occurs during the first interval (t<4.0 st < 4.0\text{ s}): set −10.0+0.75t2=0  ⟹  t2=10.00.75=403  ⟹  t=13.33≈3.65 s-10.0 + 0.75t^2 = 0 \implies t^2 = \frac{10.0}{0.75} = \frac{40}{3} \implies t = \sqrt{13.33} \approx 3.65\text{ s}.

Loading workspace…