Resources
A flat mirror of finite length rests horizontally on an optical bench with its left edge at and its right edge at . A point laser source is located at coordinates and emits rays into the fourth quadrant toward the mirror. Determine the critical threshold range of angles of incidence (measured relative to the surface normal) such that the reflected ray successfully strikes a vertical detector screen situated at without missing the reflective surface of the mirror.
Answer and steps
Final answer
Steps
Geometry of the Incident Ray
Let the optical bench lie along the -axis (). The flat mirror occupies the interval:
The laser source is located at:
The normal to the mirror at any point of incidence is directed vertically along the positive -axis. Therefore, the angle of incidence (measured relative to the normal) corresponds to the angle the incoming ray makes with the vertical:
Constraint from the Finite Mirror Surface
For the incident ray to strike the reflective surface of the mirror rather than missing it, the point of incidence must lie within the physical boundaries of the mirror, :
- Minimum point of incidence (left edge, ):
- Maximum point of incidence (right edge, ):
Trajectory of the Reflected Ray
By the law of reflection, the angle of reflection equals the angle of incidence (), and the reflected ray travels upward and toward the positive -direction for any .
The line equation for the reflected ray originating at is:
Since the vertical detector screen is positioned at , any ray reflected from the mirror surface () travels continuously to the right and will intersect the detector plane at:
At the limiting case , the height on the detector is:
Thus, the condition that limits the range of rays striking the mirror and proceeding to the screen is entirely governed by the physical extent of the mirror:
Typical errors
01 The student measures the angle of incidence relative to the horizontal mirror surface instead of the surface normal, using tan(θ) = 30.0 / x.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The angle of incidence is defined relative to the normal to the surface. Since the mirror lies horizontally along the -axis, the normal is vertical. In the right triangle formed by , , and , the side opposite to is the horizontal distance , and the side adjacent is the vertical distance . Therefore, , not .
- Step 2Correct
Because the tangent formula was inverted in Step 1, evaluating at yielded the complementary glancing angle () rather than the angle of incidence ().
- Step 3Correct
At the left edge , the ray is directed straight down along the normal, so . The resulting range of incident angles is .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the critical boundaries are determined by the endpoints of the mirror at and .
You correctly applied right-triangle trigonometry to relate the coordinates to an angle.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou defined the angle of incidence with respect to the mirror surface (glancing angle) rather than with respect to the surface normal, inverting the opposite and adjacent sides in as instead of .
REASONING PATH
Your ACEpath teacher’s suggested approach- Reference Line for Angles in Optics
In geometric optics, the angle of incidence and angle of reflection are always measured relative to the line perpendicular to the reflective surface (the surface normal), never relative to the surface itself.
Draw the normal line perpendicular to the mirror at the point of incidence first, and verify that corresponds to perpendicular (normal) incidence.
CORRECTED PATH
ACEpath Teacher's DemonstrationDraw the surface normal at the point of incidence , which points vertically along the -axis.
Identify the right triangle with vertices , , and . The angle between the incident ray and the vertical normal satisfies .
Evaluate at the left boundary of the mirror (): .
Evaluate at the right boundary of the mirror (): .
02 The student mistakenly requires the reflected ray to hit the screen's base at x_d = 75.0 cm rather than anywhere on the vertical detector, confusing the screen distance with the mirror strike point.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
The ray must strike the screen at , so the reflection point must be at
CorrectYou assumed that the ray reflects at . However, is the location of the vertical detector screen, while the mirror only extends from to . Reflection must take place on the mirror surface itself, after which the reflected ray continues toward the screen.
- Step 3
Maximum mirror length is
CorrectBecause you treated and as the minimum and maximum strike points, your resulting angle calculations were shifted away from the true mirror interval .
- Step 4
The range of angles is
CorrectYour final range inherited the incorrect reflection coordinates from earlier steps.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly related the angle of incidence to the horizontal coordinate of the ray's strike point using .
You accurately computed the arctangent values for your chosen coordinate values.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated the -coordinate of the distant vertical detector screen () with a reflection point on the mirror surface.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the detector screen's position as a physical point of reflection rather than distinguishing between where the ray reflects (on the horizontal mirror ) and where the reflected ray subsequently intercepts the vertical target ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Physical Boundaries
Reflection can only occur where a reflective surface physically exists ().
Always sketch the optical bench and mark the extent of the mirror independently from the position of any screens or detectors.
- Trace Reflected Rays Separately
The law of reflection determines the ray's trajectory after it leaves the mirror point toward the screen plane at .
Verify whether rays reflecting from valid points on the mirror actually travel forward () to hit the detector screen.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the valid reflection points to the physical mirror boundaries: .
Find the minimum angle of incidence at the left edge (): .
Find the maximum angle of incidence at the right edge (): .
Confirm that for all , the reflected ray travels into the region , intersecting the vertical line at height .
Lock it in
How is the angle of incidence strictly defined in geometric optics?
It is the angle between the incident ray and the normal (the line perpendicular to the reflecting surface at the point of incidence).
Similar question
A point source of light is at and shines rays onto a horizontal flat mirror lying on the -axis from to . Find the range of angles of incidence of rays that strike the mirror.
Answer
The normal is vertical. For any point of incidence , . At , . At , . Range: .
A flat vertical mirror is mounted along the -axis between and . A laser pointer at shines toward the mirror. Determine the range of incident angles for rays hitting the mirror.
Answer
Since the mirror is vertical along the -axis, the normal is horizontal (along the -axis). The angle relative to the normal satisfies . At , . At , . Range: .
A horizontal mirror of length lies on the -axis from to . A source at emits rays toward the mirror. Find the angle of incidence range for rays that strike the mirror, and find the position where a ray incident at strikes a screen at .
Answer
- . At , . At , . Range: .
- For , . The reflected ray has slope , so . At , .