Resources

An ultra-high-frequency quartz crystal microbalance oscillates with a measured period of T=125 nsT = 125\text{ ns} and an amplitude of A=4.20 nmA = 4.20\text{ nm}. (a) Convert the period TT into standard SI units of seconds and compute the corresponding oscillation frequency ff in megahertz (MHz\text{MHz}). (b) Calculate the maximum velocity magnitude vmaxv_{\text{max}} of the crystal surface in millimeters per second (mm/s\text{mm/s}).

Answer and steps

Final answer

(a) T=1.25×10−7 sT = 1.25 \times 10^{-7}\text{ s}, f=8.00 MHzf = 8.00\text{ MHz}; (b) vmax=211 mm/sv_{\text{max}} = 211\text{ mm/s} (or 0.211 m/s0.211\text{ m/s})

Steps

Part (a): Determining Period in Seconds and Frequency in Megahertz

  1. Convert the period TT to standard SI units (s\text{s}): The metric prefix nano (n\text{n}) corresponds to a factor of 10−910^{-9}. Therefore: T=125 ns=125×10−9 s=1.25×10−7 sT = 125\text{ ns} = 125 \times 10^{-9}\text{ s} = 1.25 \times 10^{-7}\text{ s}
  2. Compute the oscillation frequency ff: Frequency is the reciprocal of the period: f=1Tf = \frac{1}{T} Substituting the value of TT: f=11.25×10−7 s=8.00×106 Hzf = \frac{1}{1.25 \times 10^{-7}\text{ s}} = 8.00 \times 10^6\text{ Hz} Since 1 MHz=106 Hz1\text{ MHz} = 10^6\text{ Hz}: f=8.00 MHzf = 8.00\text{ MHz}

Part (b): Calculating the Maximum Velocity vmaxv_{\text{max}}

  1. Relate maximum velocity to amplitude and angular frequency: For an object undergoing simple harmonic motion, the position varies sinusoidally as x(t)=Acos⁡(ωt+ϕ)x(t) = A \cos(\omega t + \phi), and velocity is given by v(t)=−Aωsin⁡(ωt+ϕ)v(t) = -A\omega \sin(\omega t + \phi). The maximum speed occurs when the oscillating surface passes through the equilibrium position (sin⁡(ωt+ϕ)=±1\sin(\omega t + \phi) = \pm 1): vmax=ωA=2πfAv_{\text{max}} = \omega A = 2\pi f A
  2. Convert amplitude to meters: A=4.20 nm=4.20×10−9 mA = 4.20\text{ nm} = 4.20 \times 10^{-9}\text{ m}
  3. Calculate vmaxv_{\text{max}}: ω=2πf=2π⋅(8.00×106 s−1)≈5.0265×107 rad/s\omega = 2\pi f = 2\pi \cdot (8.00 \times 10^6\text{ s}^{-1}) \approx 5.0265 \times 10^7\text{ rad/s} vmax=(5.0265×107 rad/s)⋅(4.20×10−9 m)≈0.2111 m/sv_{\text{max}} = (5.0265 \times 10^7\text{ rad/s}) \cdot (4.20 \times 10^{-9}\text{ m}) \approx 0.2111\text{ m/s}
  4. Convert to millimeters per second (mm/s\text{mm/s}): Since 1 m/s=1000 mm/s1\text{ m/s} = 1000\text{ mm/s}: vmax=0.2111×103 mm/s≈211 mm/sv_{\text{max}} = 0.2111 \times 10^3\text{ mm/s} \approx 211\text{ mm/s}

Common Pitfall: Be careful not to confuse frequency ff (in Hz\text{Hz}) with angular frequency ω\omega (in rad/s\text{rad/s}). Computing vmaxv_{\text{max}} requires multiplying by 2π2\pi, as vmax=2πfAv_{\text{max}} = 2\pi f A, not simply fAf A.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses frequency with angular frequency, calculating maximum velocity as v_max = f A instead of 2π f A.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=125×10−9 s=1.25×10−7 s  ⟹  f=11.25×10−7 s=8.00×106 Hz=8.00 MHzT = 125 \times 10^{-9}\text{ s} = 1.25 \times 10^{-7}\text{ s} \implies f = \frac{1}{1.25 \times 10^{-7}\text{ s}} = 8.00 \times 10^6\text{ Hz} = 8.00\text{ MHz}

  2. Step 2

    vmax=fAv_{\text{max}} = f A

    Correct

    vmax=ωA=2πfAv_{\text{max}} = \omega A = 2\pi f A

    In simple harmonic motion, maximum speed depends on angular frequency ω\omega in radians per second, which relates to regular frequency ff by ω=2πf\omega = 2\pi f.

  3. Step 3

    vmax=(8.00×106 s−1)×(4.20×10−9 m)=0.0336 m/s=33.6 mm/sv_{\text{max}} = (8.00 \times 10^6\text{ s}^{-1}) \times (4.20 \times 10^{-9}\text{ m}) = 0.0336\text{ m/s} = 33.6\text{ mm/s}

    Correct

    vmax=2π(8.00×106 s−1)(4.20×10−9 m)≈0.211 m/s=211 mm/sv_{\text{max}} = 2\pi (8.00 \times 10^6\text{ s}^{-1})(4.20 \times 10^{-9}\text{ m}) \approx 0.211\text{ m/s} = 211\text{ mm/s}

    Your arithmetic and unit conversions from meters per second to millimeters per second were correct, but the final value is off by a factor of 2π2\pi carried forward from step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted nanoseconds to seconds in scientific notation.

You correctly applied the relationship f=1Tf = \frac{1}{T} to calculate the linear frequency in megahertz.

You properly converted nanometers to meters and converted meters per second to millimeters per second.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Frequency with Angular Frequency

No, this is a conceptual misunderstanding rather than a computational slip, as the governing formula vmax=ωA=2πfAv_{\text{max}} = \omega A = 2\pi f A was replaced by fAf A.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated cyclical frequency ff (measured in cycles per second, or hertz) as angular frequency ω\omega (measured in radians per second). Because each full oscillation cycle corresponds to an angular phase progression of 2π rad2\pi\text{ rad}, the maximum derivative of position x(t)=Acos⁡(ωt+ϕ)x(t) = A\cos(\omega t + \phi) is ωA=2πfA\omega A = 2\pi f A.

REASONING PATH
Your ACEpath teacher’s suggested approach
Differentiating Cyclical vs. Angular Frequency
  • Linear frequency ff counts complete cycles per second (Hz\text{Hz}), whereas angular frequency ω=2πf\omega = 2\pi f measures the rate of phase rotation (rad/s\text{rad/s}).

  • Always verify whether an kinematic formula in SHM requires ff or ω\omega before substituting.

Peak Kinematic Quantities in SHM
  • For an oscillator with amplitude AA, maximum speed is vmax=ωA=2πfAv_{\text{max}} = \omega A = 2\pi f A and maximum acceleration magnitude is amax=ω2A=(2πf)2Aa_{\text{max}} = \omega^2 A = (2\pi f)^2 A.

  • Derive peak values from the sinusoidal derivatives or memorize the factor of ω\omega introduced by the chain rule.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that v(t)=dxdt=−Aωsin⁡(ωt+ϕ)v(t) = \frac{dx}{dt} = -A\omega \sin(\omega t + \phi), so vmax=ωAv_{\text{max}} = \omega A.

  2. Substitute ω=2πf\omega = 2\pi f: vmax=2πfAv_{\text{max}} = 2\pi f A.

  3. Substitute f=8.00×106 s−1f = 8.00 \times 10^6\text{ s}^{-1} and A=4.20×10−9 mA = 4.20 \times 10^{-9}\text{ m}: vmax=2π(8.00×106 s−1)(4.20×10−9 m)≈0.2111 m/sv_{\text{max}} = 2\pi (8.00 \times 10^6\text{ s}^{-1})(4.20 \times 10^{-9}\text{ m}) \approx 0.2111\text{ m/s}.

  4. Convert to millimeters per second: 0.2111 m/s×1000 mm/m≈211 mm/s0.2111\text{ m/s} \times 1000\text{ mm/m} \approx 211\text{ mm/s}.

Final answer

(a) T=1.25×10−7 sT = 1.25 \times 10^{-7}\text{ s}, f=8.00 MHzf = 8.00\text{ MHz}; (b) vmax=211 mm/sv_{\text{max}} = 211\text{ mm/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out ω=2πf\omega = 2\pi f explicitly as an intermediate step whenever an SHM question provides frequency ff or period TT.

  • Practice writing down the amplitude-frequency pairs for maximum position (AA), maximum velocity (ωA\omega A), and maximum acceleration (ω2A\omega^2 A).

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the nanosecond prefix as 10⁻⁶ seconds instead of 10⁻⁹ seconds, leading to an incorrect period and frequency.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T=125×10−6 s=1.25×10−4 sT = 125 \times 10^{-6}\text{ s} = 1.25 \times 10^{-4}\text{ s}

    Correct

    T=125 ns=125×10−9 s=1.25×10−7 sT = 125\text{ ns} = 125 \times 10^{-9}\text{ s} = 1.25 \times 10^{-7}\text{ s}

    You used the factor 10−610^{-6} for nanoseconds, which belongs to micro (μ\mu). The prefix nano (n\text{n}) represents 10−910^{-9}, so 125 ns125\text{ ns} equals 1.25×10−7 s1.25 \times 10^{-7}\text{ s}.

  2. Step 2

    f=11.25×10−4 s=8000 Hz=0.00800 MHzf = \frac{1}{1.25 \times 10^{-4}\text{ s}} = 8000\text{ Hz} = 0.00800\text{ MHz}

    Correct

    f=1T=11.25×10−7 s=8.00×106 Hz=8.00 MHzf = \frac{1}{T} = \frac{1}{1.25 \times 10^{-7}\text{ s}} = 8.00 \times 10^6\text{ Hz} = 8.00\text{ MHz}

    Your relationship f=1Tf = \frac{1}{T} and subsequent conversion from Hz\text{Hz} to MHz\text{MHz} were carried out correctly, but the numerical answer inherits the error from Step 1.

  3. Step 3

    vmax⁡=2πfA  ⟹  vmax⁡=2π×(8000 s−1)×(4.20×10−9 m)  ⟹  vmax⁡=2.11×10−4 m/s=0.211 mm/sv_{\max} = 2\pi f A \implies v_{\max} = 2\pi \times (8000\text{ s}^{-1}) \times (4.20 \times 10^{-9}\text{ m}) \implies v_{\max} = 2.11 \times 10^{-4}\text{ m/s} = 0.211\text{ mm/s}

    Correct

    vmax⁡=2πfA=2π(8.00×106 s−1)(4.20×10−9 m)≈0.211 m/s=211 mm/sv_{\max} = 2\pi f A = 2\pi (8.00 \times 10^6\text{ s}^{-1})(4.20 \times 10^{-9}\text{ m}) \approx 0.211\text{ m/s} = 211\text{ mm/s}

    You correctly applied the formula vmax⁡=2πfAv_{\max} = 2\pi f A, converted the amplitude AA using 10−9 m10^{-9}\text{ m}, and converted m/s\text{m/s} to mm/s\text{mm/s}. The final value is off by a factor of 10001000 solely due to the incorrect frequency from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You used the correct relationship between frequency and period, f=1Tf = \frac{1}{T}.

You correctly used the formula for the maximum speed of simple harmonic motion, vmax⁡=2πfAv_{\max} = 2\pi f A.

You accurately converted the amplitude from nanometers to meters using 10−910^{-9}.

You executed the unit conversions from Hz\text{Hz} to MHz\text{MHz} and from m/s\text{m/s} to mm/s\text{mm/s} correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix confusion (nano vs. micro)

You wrote 125 ns=125×10−6 s125\text{ ns} = 125 \times 10^{-6}\text{ s}, confusing the prefix nano (n−\text{n}-) with micro (μ−\mu-).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inconsistent recall of metric SI prefixes when working with time units versus distance units, causing you to treat nanoseconds as 10−6 s10^{-6}\text{ s} while correctly treating nanometers as 10−9 m10^{-9}\text{ m}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric Prefix Powers of Ten
  • The prefix micro (μ\mu) corresponds to 10−610^{-6}, whereas nano (n\text{n}) corresponds to 10−910^{-9}, regardless of the base unit.

  • Before calculating, write out the prefix definition explicitly: n=10−9\text{n} = 10^{-9} and μ=10−6\mu = 10^{-6}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the period using nano =10−9= 10^{-9}: T=125 ns=125×10−9 s=1.25×10−7 sT = 125\text{ ns} = 125 \times 10^{-9}\text{ s} = 1.25 \times 10^{-7}\text{ s}.

  2. Compute the frequency: f=1T=11.25×10−7 s=8.00×106 Hz=8.00 MHzf = \frac{1}{T} = \frac{1}{1.25 \times 10^{-7}\text{ s}} = 8.00 \times 10^6\text{ Hz} = 8.00\text{ MHz}.

  3. Substitute into vmax⁡=2πfAv_{\max} = 2\pi f A: vmax⁡=2π(8.00×106 s−1)(4.20×10−9 m)≈0.2111 m/sv_{\max} = 2\pi (8.00 \times 10^6\text{ s}^{-1})(4.20 \times 10^{-9}\text{ m}) \approx 0.2111\text{ m/s}.

  4. Convert to millimeters per second: vmax⁡=0.2111×103 mm/s=211 mm/sv_{\max} = 0.2111 \times 10^3\text{ mm/s} = 211\text{ mm/s}.

Final answer

(a) T=1.25×10−7 sT = 1.25 \times 10^{-7}\text{ s}, f=8.00 MHzf = 8.00\text{ MHz}; (b) vmax⁡=211 mm/sv_{\max} = 211\text{ mm/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the SI metric prefix ladder from milli (10−310^{-3}) to micro (10−610^{-6}) and nano (10−910^{-9}).

  • Double-check that the same prefix (like nano in ns\text{ns} and nm\text{nm}) receives the exact same exponent across different variables in a problem.

  • Perform the practice exercises below to reinforce rapid conversion and substitution.

OverviewACEpath Teacher's Diagnosis

03 The student confuses maximum velocity with maximum acceleration and squares the angular frequency, using v_max = ω² A.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=125×10−9 s=1.25×10−7 sT = 125 \times 10^{-9}\text{ s} = 1.25 \times 10^{-7}\text{ s}

  2. Step 2

    f=11.25×10−7 s=8.00×106 Hz=8.00 MHzf = \frac{1}{1.25 \times 10^{-7}\text{ s}} = 8.00 \times 10^6\text{ Hz} = 8.00\text{ MHz}

  3. Step 3

    ω=2πf=2π×(8.00×106 s−1)=5.03×107 rad/s\omega = 2\pi f = 2\pi \times (8.00 \times 10^6\text{ s}^{-1}) = 5.03 \times 10^7\text{ rad/s}

  4. Step 4

    vmax⁡=ω2A  ⟹  vmax⁡=(5.03×107 s−1)2×(4.20×10−9 m)  ⟹  vmax⁡=1.06×107 m/s=1.06×1010 mm/sv_{\max} = \omega^2 A \implies v_{\max} = (5.03 \times 10^7\text{ s}^{-1})^2 \times (4.20 \times 10^{-9}\text{ m}) \implies v_{\max} = 1.06 \times 10^7\text{ m/s} = 1.06 \times 10^{10}\text{ mm/s}

    Correct

    vmax⁡=ωA=(5.027×107 rad/s)×(4.20×10−9 m)≈0.211 m/s=211 mm/sv_{\max} = \omega A = (5.027 \times 10^7\text{ rad/s}) \times (4.20 \times 10^{-9}\text{ m}) \approx 0.211\text{ m/s} = 211\text{ mm/s}

    You applied vmax⁡=ω2Av_{\max} = \omega^2 A, which is the expression for maximum acceleration amax⁡a_{\max}, rather than maximum velocity vmax⁡=ωAv_{\max} = \omega A.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted nanoseconds to seconds using the correct power of ten.

You correctly applied the reciprocal relation between period and frequency.

You correctly related frequency to angular frequency using ω=2πf\omega = 2\pi f.

You correctly carried out unit conversions between meters and millimeters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion between maximum velocity and maximum acceleration

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the first derivative of displacement (velocity, with amplitude ωA\omega A) with the second derivative (acceleration, with amplitude ω2A\omega^2 A).

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinematic Amplitudes in SHM
  • For x(t)=Acos⁡(ωt)x(t) = A\cos(\omega t), taking the first time derivative yields v(t)=−ωAsin⁡(ωt)v(t) = -\omega A \sin(\omega t) so vmax⁡=ωAv_{\max} = \omega A. Taking the second time derivative yields a(t)=−ω2Acos⁡(ωt)a(t) = -\omega^2 A \cos(\omega t) so amax⁡=ω2Aa_{\max} = \omega^2 A.

  • Check dimensions before computing: ωA\omega A has units of (s−1)(m)=m/s(\text{s}^{-1})(\text{m}) = \text{m/s} (speed), whereas ω2A\omega^2 A has units of (s−2)(m)=m/s2(\text{s}^{-2})(\text{m}) = \text{m/s}^2 (acceleration).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the maximum velocity formula: vmax⁡=ωAv_{\max} = \omega A.

  2. Substitute the values: vmax⁡=(5.027×107 rad/s)×(4.20×10−9 m)≈0.2111 m/sv_{\max} = (5.027 \times 10^7\text{ rad/s}) \times (4.20 \times 10^{-9}\text{ m}) \approx 0.2111\text{ m/s}.

  3. Convert to millimeters per second: 0.2111 m/s×1000 mm/m≈211 mm/s0.2111\text{ m/s} \times 1000\text{ mm/m} \approx 211\text{ mm/s}.

Final answer

(a) T=1.25×10−7 sT = 1.25 \times 10^{-7}\text{ s}, f=8.00 MHzf = 8.00\text{ MHz}; (b) vmax⁡=211 mm/sv_{\max} = 211\text{ mm/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivatives of sinusoidal position to see why each time derivative brings out an additional factor of ω\omega.

  • Always perform dimensional analysis on kinematic formulas to verify whether you obtain m/s\text{m/s} or m/s2\text{m/s}^2.

Lock it in

Similar question

01

A tuning fork vibrates at a frequency of f=440 Hzf = 440\text{ Hz} with an amplitude of A=0.50 mmA = 0.50\text{ mm}. Calculate its maximum speed vmaxv_{\text{max}} in meters per second (m/s\text{m/s}).

Answer

vmax=2πfA=2π(440 s−1)(0.50×10−3 m)≈1.38 m/sv_{\text{max}} = 2\pi f A = 2\pi (440\text{ s}^{-1})(0.50 \times 10^{-3}\text{ m}) \approx 1.38\text{ m/s}.

02

A mass-spring oscillator oscillates with a period of T=0.20 sT = 0.20\text{ s} and reaches a maximum speed of vmax=1.57 m/sv_{\text{max}} = 1.57\text{ m/s}. Find the amplitude AA of the oscillation in centimeters.

Answer

ω=2πT=2π0.20 s=10π rad/s≈31.42 rad/s\omega = \frac{2\pi}{T} = \frac{2\pi}{0.20\text{ s}} = 10\pi\text{ rad/s} \approx 31.42\text{ rad/s}. Then A=vmaxω=1.57 m/s10π rad/s=0.050 m=5.0 cmA = \frac{v_{\text{max}}}{\omega} = \frac{1.57\text{ m/s}}{10\pi\text{ rad/s}} = 0.050\text{ m} = 5.0\text{ cm}.

03

A MEMS cantilever oscillates in simple harmonic motion at f=2.50 MHzf = 2.50\text{ MHz} with an amplitude of A=1.20 nmA = 1.20\text{ nm}. Determine: (a) its angular frequency ω\omega in radians per second, (b) its maximum speed vmaxv_{\text{max}} in millimeters per second, and (c) its maximum acceleration amaxa_{\text{max}} in kilometers per second squared.

Answer

(a) ω=2πf=2π(2.50×106 s−1)≈1.57×107 rad/s\omega = 2\pi f = 2\pi (2.50 \times 10^6\text{ s}^{-1}) \approx 1.57 \times 10^7\text{ rad/s}.\n(b) vmax=ωA=(1.571×107 rad/s)(1.20×10−9 m)≈0.0188 m/s=18.8 mm/sv_{\text{max}} = \omega A = (1.571 \times 10^7\text{ rad/s})(1.20 \times 10^{-9}\text{ m}) \approx 0.0188\text{ m/s} = 18.8\text{ mm/s}.\n(c) amax=ω2A=(1.571×107 rad/s)2(1.20×10−9 m)≈2.96×105 m/s2=296 km/s2a_{\text{max}} = \omega^2 A = (1.571 \times 10^7\text{ rad/s})^2 (1.20 \times 10^{-9}\text{ m}) \approx 2.96 \times 10^5\text{ m/s}^2 = 296\text{ km/s}^2.

Loading workspace…