Resources

Three identical small particles, each of mass m=0.400 kgm = 0.400\text{ kg}, lie in the xyxy-plane at the coordinates (x1,y1)=(−0.300 m,0.200 m)(x_1, y_1) = (-0.300\text{ m}, 0.200\text{ m}), (x2,y2)=(0.500 m,−0.100 m)(x_2, y_2) = (0.500\text{ m}, -0.100\text{ m}), and (x3,y3)=(−0.200 m,−0.400 m)(x_3, y_3) = (-0.200\text{ m}, -0.400\text{ m}). (a) Calculate the moment of inertia IzI_z of this three-particle system about the zz-axis (which passes through the origin perpendicular to the xyxy-plane), paying careful attention to coordinate signs. (b) Explain why negative coordinate values make strictly non-negative contributions to the moment of inertia.

Answer and steps

Final answer

(a) Iz=0.236 kg⋅m2I_z = 0.236\text{ kg}\cdot\text{m}^2; (b) Moment of inertia depends on the square of perpendicular distance (ri2=xi2+yi2r_i^2 = x_i^2 + y_i^2), so all coordinate signs square to non-negative values.

Steps

(a) Calculating the Moment of Inertia IzI_z

The moment of inertia of a discrete system of point masses rotating about a given axis is defined as: I=∑imiri2I = \sum_{i} m_i r_i^2

where rir_i is the perpendicular distance from the axis of rotation to the ii-th particle.

For the zz-axis, which passes through the origin (0,0)(0, 0) perpendicular to the xyxy-plane, the perpendicular distance rir_i of a point (xi,yi)(x_i, y_i) is given by the Pythagorean theorem: ri2=xi2+yi2r_i^2 = x_i^2 + y_i^2

Since each particle has the same mass m=0.400 kgm = 0.400\text{ kg}, we can factor mm out: Iz=m∑i=13(xi2+yi2)I_z = m \sum_{i=1}^{3} (x_i^2 + y_i^2)

Now, compute ri2r_i^2 for each particle:

  1. For Particle 1 at (−0.300 m,0.200 m)(-0.300\text{ m}, 0.200\text{ m}): r12=(−0.300 m)2+(0.200 m)2=0.0900 m2+0.0400 m2=0.130 m2r_1^2 = (-0.300\text{ m})^2 + (0.200\text{ m})^2 = 0.0900\text{ m}^2 + 0.0400\text{ m}^2 = 0.130\text{ m}^2
  2. For Particle 2 at (0.500 m,−0.100 m)(0.500\text{ m}, -0.100\text{ m}): r22=(0.500 m)2+(−0.100 m)2=0.2500 m2+0.0100 m2=0.260 m2r_2^2 = (0.500\text{ m})^2 + (-0.100\text{ m})^2 = 0.2500\text{ m}^2 + 0.0100\text{ m}^2 = 0.260\text{ m}^2
  3. For Particle 3 at (−0.200 m,−0.400 m)(-0.200\text{ m}, -0.400\text{ m}): r32=(−0.200 m)2+(−0.400 m)2=0.0400 m2+0.1600 m2=0.200 m2r_3^2 = (-0.200\text{ m})^2 + (-0.400\text{ m})^2 = 0.0400\text{ m}^2 + 0.1600\text{ m}^2 = 0.200\text{ m}^2

Sum the squared distances: ∑i=13ri2=0.130 m2+0.260 m2+0.200 m2=0.590 m2\sum_{i=1}^{3} r_i^2 = 0.130\text{ m}^2 + 0.260\text{ m}^2 + 0.200\text{ m}^2 = 0.590\text{ m}^2

Multiply by the mass mm: Iz=(0.400 kg)⋅(0.590 m2)=0.236 kg⋅m2I_z = (0.400\text{ kg}) \cdot (0.590\text{ m}^2) = 0.236\text{ kg}\cdot\text{m}^2


(b) Why Negative Coordinates Make Non-Negative Contributions

The moment of inertia depends purely on how mass is distributed in terms of geometric distance from the axis of rotation, not directional displacement.

  • The distance rir_i from the zz-axis satisfies ri2=xi2+yi2r_i^2 = x_i^2 + y_i^2.
  • For any real coordinate value a∈Ra \in \mathbb{R}, its square is strictly non-negative: a2≥0a^2 \ge 0 (specifically, (−a)2=a2>0(-a)^2 = a^2 > 0 for any non-zero coordinate).
  • Because mass is positive (m>0m > 0), every individual mass contribution ΔIi=m(xi2+yi2)\Delta I_i = m(x_i^2 + y_i^2) is strictly positive for any particle not lying directly on the axis.

Common Pitfall: A common mistake is carrying a negative sign outside the squared term (e.g., treating −x2-x^2 instead of (−x)2(-x)^2). Rotational inertia is a scalar measure of rotational sluggishness, and mass placed at (−x,−y)(-x, -y) resists angular acceleration just as effectively as mass placed at (+x,+y)(+x, +y).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the negative sign properly or incorrectly subtracts terms with negative coordinates, leading to an incorrect moment of inertia of 0.044 kg·m².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Iz=m(r12+r22+r32)I_z = m(r_1^2 + r_2^2 + r_3^2)

  2. Step 2

    r12=−0.3002+0.2002=−0.050 m2  ⟹  r22=0.5002−0.1002=0.240 m2  ⟹  r32=−0.2002−0.4002=−0.080 m2r_1^2 = -0.300^2 + 0.200^2 = -0.050\text{ m}^2 \implies r_2^2 = 0.500^2 - 0.100^2 = 0.240\text{ m}^2 \implies r_3^2 = -0.200^2 - 0.400^2 = -0.080\text{ m}^2

    Correct

    r12=(−0.300 m)2+(0.200 m)2=0.130 m2  ⟹  r22=(0.500 m)2+(−0.100 m)2=0.260 m2  ⟹  r32=(−0.200 m)2+(−0.400 m)2=0.200 m2r_1^2 = (-0.300\text{ m})^2 + (0.200\text{ m})^2 = 0.130\text{ m}^2 \implies r_2^2 = (0.500\text{ m})^2 + (-0.100\text{ m})^2 = 0.260\text{ m}^2 \implies r_3^2 = (-0.200\text{ m})^2 + (-0.400\text{ m})^2 = 0.200\text{ m}^2

    The distance squared from the zz-axis is ri2=xi2+yi2r_i^2 = x_i^2 + y_i^2. When substituting negative coordinates, the negative sign must be enclosed in parentheses before squaring: (−0.300)2=+0.0900(-0.300)^2 = +0.0900, not −0.0900-0.0900. Distance squared cannot be negative.

  3. Step 3

    Iz=0.400(−0.050+0.240−0.080)=0.400(0.110)=0.044 kg⋅m2I_z = 0.400(-0.050 + 0.240 - 0.080) = 0.400(0.110) = 0.044\text{ kg}\cdot\text{m}^2

    Correct

    Iz=0.400 kg⋅(0.130 m2+0.260 m2+0.200 m2)=0.236 kg⋅m2I_z = 0.400\text{ kg} \cdot (0.130\text{ m}^2 + 0.260\text{ m}^2 + 0.200\text{ m}^2) = 0.236\text{ kg}\cdot\text{m}^2

    Because the squared radial distances were calculated with incorrect signs, the resulting sum and moment of inertia were numerically incorrect.

  4. Step 4

    "Negative coordinates make negative contributions because the negative signs are retained when squared."

    Correct

    "The moment of inertia depends on perpendicular distance squared, ri2=xi2+yi2r_i^2 = x_i^2 + y_i^2. For any real coordinate, (−a)2=a2≥0(-a)^2 = a^2 \ge 0, so all coordinates make strictly non-negative contributions."

    A negative real number squared always yields a non-negative number: (−a)2=a2>0(-a)^2 = a^2 > 0 for a≠0a \ne 0. Geometrically, moment of inertia depends only on distance from the axis, which is purely positive regardless of which quadrant a mass occupies.

WHAT YOU DID WELL
Compliments from Your Teacher

You factored out the equal mass mm properly to simplify the sum of squared distances.

You carried out the subsequent arithmetic consistently according to your calculated intermediate values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error when squaring negative coordinates

You omitted parentheses when squaring negative coordinates, writing −x2-x^2 instead of (−x)2(-x)^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You misunderstood how distance relates to coordinate signs, incorrectly believing that coordinate signs survive squaring and reduce rotational inertia.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distance is scalar magnitude
  • Rotational inertia depends on the perpendicular distance r=x2+y2r = \sqrt{x^2 + y^2}, not displacement vector direction.

  • Always write radial distance squared as (xi)2+(yi)2(x_i)^2 + (y_i)^2 with parentheses around each coordinate value.

Squaring negative numbers
  • For any real number cc, (−c)2=+c2(-c)^2 = +c^2.

  • Ensure that every squared term ri2r_i^2 evaluates to a strictly positive quantity for any particle not on the axis.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. r12=(−0.300)2+(0.200)2=0.0900+0.0400=0.130 m2r_1^2 = (-0.300)^2 + (0.200)^2 = 0.0900 + 0.0400 = 0.130\text{ m}^2

  2. r22=(0.500)2+(−0.100)2=0.2500+0.0100=0.260 m2r_2^2 = (0.500)^2 + (-0.100)^2 = 0.2500 + 0.0100 = 0.260\text{ m}^2

  3. r32=(−0.200)2+(−0.400)2=0.0400+0.1600=0.200 m2r_3^2 = (-0.200)^2 + (-0.400)^2 = 0.0400 + 0.1600 = 0.200\text{ m}^2

  4. ∑ri2=0.130+0.260+0.200=0.590 m2\sum r_i^2 = 0.130 + 0.260 + 0.200 = 0.590\text{ m}^2

  5. Iz=(0.400 kg)(0.590 m2)=0.236 kg⋅m2I_z = (0.400\text{ kg})(0.590\text{ m}^2) = 0.236\text{ kg}\cdot\text{m}^2

Final answer

(a) Iz=0.236 kg⋅m2I_z = 0.236\text{ kg}\cdot\text{m}^2; (b) Perpendicular distance squared is ri2=xi2+yi2r_i^2 = x_i^2 + y_i^2, and since the square of any real number is non-negative ((−a)2=a2≥0(-a)^2 = a^2 \ge 0), negative coordinates always yield positive contributions.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing coordinate substitutions with explicit parentheses, such as (−0.300 m)2(-0.300\text{ m})^2, to avoid calculator and algebraic sign errors.

  • Perform a physical sanity check: no point mass with positive mass can ever contribute a negative value to the moment of inertia about any axis.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the moment of inertia by omitting the squaring of distances (using m*r instead of m*r²), obtaining 0.658 kg·m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Iz=∑mriI_z = \sum m r_i

    Correct

    Iz=∑miri2=m∑(xi2+yi2)I_z = \sum m_i r_i^2 = m \sum (x_i^2 + y_i^2)

    You omitted the exponent of 22 on the radial distance. Moment of inertia represents the second moment of mass, defined as I=∑miri2I = \sum m_i r_i^2.

  2. Step 2

    r1=(−0.300)2+0.2002=0.130=0.361 m  ⟹  r2=0.5002+(−0.100)2=0.260=0.510 m  ⟹  r3=(−0.200)2+(−0.400)2=0.200=0.447 mr_1 = \sqrt{(-0.300)^2 + 0.200^2} = \sqrt{0.130} = 0.361\text{ m} \implies r_2 = \sqrt{0.500^2 + (-0.100)^2} = \sqrt{0.260} = 0.510\text{ m} \implies r_3 = \sqrt{(-0.200)^2 + (-0.400)^2} = \sqrt{0.200} = 0.447\text{ m}

  3. Step 3

    rtotal=0.361+0.510+0.447=1.318 m  ⟹  Iz=0.400×1.318=0.527 kg⋅mr_{\text{total}} = 0.361 + 0.510 + 0.447 = 1.318\text{ m} \implies I_z = 0.400 \times 1.318 = 0.527\text{ kg}\cdot\text{m}

    Correct

    Iz=0.400 kg×(0.130+0.260+0.200) m2=0.236 kg⋅m2I_z = 0.400\text{ kg} \times (0.130 + 0.260 + 0.200)\text{ m}^2 = 0.236\text{ kg}\cdot\text{m}^2

    Because the initial formula lacked the squared radius, your final sum and units (kg⋅m\text{kg}\cdot\text{m} instead of kg⋅m2\text{kg}\cdot\text{m}^2) propagated the earlier error.

  4. Step 4

    Distance r is defined as x2+y2, which is always positive because distances are magnitudes.\text{Distance } r \text{ is defined as } \sqrt{x^2+y^2}\text{, which is always positive because distances are magnitudes.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the Pythagorean theorem to find the perpendicular distance from the origin in the xyxy-plane.

You properly squared negative coordinates to yield positive quantities inside the square root.

You correctly recognized that geometric distance is a non-negative scalar quantity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted distance squaring in moment of inertia

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the formula for the first moment of mass (proportional to mrm r, as in center-of-mass calculations) rather than the rotational inertia definition, which depends on the square of the perpendicular distance (mr2m r^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional and Unit Check
  • Rotational inertia has dimensions of [mass][length]2[\text{mass}][\text{length}]^2 with SI units of kg⋅m2\text{kg}\cdot\text{m}^2.

  • Always verify your final units: if your result is in kg⋅m\text{kg}\cdot\text{m}, you calculated a mass moment rather than a moment of inertia.

Definition of Moment of Inertia
  • I=∑miri2I = \sum m_i r_i^2, where ri2=xi2+yi2r_i^2 = x_i^2 + y_i^2 for rotation about the zz-axis.

  • Keep the squared radius ri2=xi2+yi2r_i^2 = x_i^2 + y_i^2 directly instead of taking the square root only to square it again.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the squared perpendicular distances directly: r12=0.130 m2r_1^2 = 0.130\text{ m}^2, r22=0.260 m2r_2^2 = 0.260\text{ m}^2, and r32=0.200 m2r_3^2 = 0.200\text{ m}^2.

  2. Sum the squared distances: ∑ri2=0.130+0.260+0.200=0.590 m2\sum r_i^2 = 0.130 + 0.260 + 0.200 = 0.590\text{ m}^2.

  3. Multiply by the common particle mass: Iz=m∑ri2=(0.400 kg)(0.590 m2)=0.236 kg⋅m2I_z = m \sum r_i^2 = (0.400\text{ kg})(0.590\text{ m}^2) = 0.236\text{ kg}\cdot\text{m}^2.

Final answer

(a) Iz=0.236 kg⋅m2I_z = 0.236\text{ kg}\cdot\text{m}^2; (b) Perpendicular distance squared is ri2=xi2+yi2r_i^2 = x_i^2 + y_i^2, and the square of any real coordinate is strictly non-negative.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical difference between center-of-mass weighting (∑miri\sum m_i r_i) and rotational inertia weighting (∑miri2\sum m_i r_i^2).

  • Practice keeping r2=x2+y2r^2 = x^2 + y^2 without computing intermediate square roots when calculating rotational inertia about the zz-axis.

OverviewACEpath Teacher's Diagnosis

03 The student sums coordinates linearly first to find the center of mass distance from the origin before calculating the moment of inertia, obtaining 0.080 kg·m².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    xtotal=−0.300+0.500−0.200=0.000 m  ⟹  ytotal=0.200−0.100−0.400=−0.300 mx_{\text{total}} = -0.300 + 0.500 - 0.200 = 0.000\text{ m} \implies y_{\text{total}} = 0.200 - 0.100 - 0.400 = -0.300\text{ m}

    Correct

    r12=(−0.300)2+(0.200)2=0.130 m2,  r22=(0.500)2+(−0.100)2=0.260 m2,  r32=(−0.200)2+(−0.400)2=0.200 m2r_1^2 = (-0.300)^2 + (0.200)^2 = 0.130\text{ m}^2,\; r_2^2 = (0.500)^2 + (-0.100)^2 = 0.260\text{ m}^2,\; r_3^2 = (-0.200)^2 + (-0.400)^2 = 0.200\text{ m}^2

    You added the xx- and yy-coordinates of all three particles together. Moment of inertia cannot be found by summing coordinates linearly because it is a non-linear quantity depending on each particle's individual squared distance to the axis: Iz=∑mi(xi2+yi2)I_z = \sum m_i (x_i^2 + y_i^2).

  2. Step 2

    R2=(0.000)2+(−0.300)2=0.090 m2R^2 = (0.000)^2 + (-0.300)^2 = 0.090\text{ m}^2

    Correct

    ∑i=13ri2=0.130+0.260+0.200=0.590 m2\sum_{i=1}^3 r_i^2 = 0.130 + 0.260 + 0.200 = 0.590\text{ m}^2

    Your calculation correctly evaluates x2+y2x^2 + y^2 for your lumped position, but because the positions were combined linearly in the previous step, this distance does not represent the sum of squared distances.

  3. Step 3

    M=3×0.400=1.200 kg  ⟹  Iz=MR2=1.200×0.090=0.108 kg⋅m2M = 3 \times 0.400 = 1.200\text{ kg} \implies I_z = M R^2 = 1.200 \times 0.090 = 0.108\text{ kg}\cdot\text{m}^2

    Correct

    Iz=m∑i=13ri2=0.400 kg×0.590 m2=0.236 kg⋅m2I_z = m \sum_{i=1}^3 r_i^2 = 0.400\text{ kg} \times 0.590\text{ m}^2 = 0.236\text{ kg}\cdot\text{m}^2

    You multiplied total mass by the lumped squared distance. Carrying forward the earlier error led to 0.108 kg⋅m20.108\text{ kg}\cdot\text{m}^2 instead of 0.236 kg⋅m20.236\text{ kg}\cdot\text{m}^2.

  4. Step 4

    The distance from the origin is squared as R2=x2+y2R^2 = x^2 + y^2, so negative total coordinates become positive when squared.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the distance formula in the xyxy-plane involves r2=x2+y2r^2 = x^2 + y^2.

You accurately carried through negative signs when squaring numbers.

You correctly calculated the total mass of the identical particles.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear superposition before squaring in moment of inertia

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated moment of inertia as if the system's mass could be condensed into a single net coordinate vector before squaring, overlooking that moment of inertia is an additive scalar sum of individual squared distances: ∑miri2≠M(∑ri)2\sum m_i r_i^2 \neq M(\sum r_i)^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Discrete Moment of Inertia Definition
  • For discrete particles, I=∑imiri2I = \sum_{i} m_i r_i^2, where ri=xi2+yi2r_i = \sqrt{x_i^2 + y_i^2} is each particle's individual perpendicular distance to the rotation axis.

  • Calculate ri2=xi2+yi2r_i^2 = x_i^2 + y_i^2 separately for every particle before summing their contributions.

Non-linearity of Squaring
  • In general, (a1+a2+… )2≠a12+a22+…(a_1 + a_2 + \dots)^2 \neq a_1^2 + a_2^2 + \dots, so coordinates cannot be summed before squaring.

  • Always square coordinates and compute distances per mass element first, then sum the inertia scalar values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute ri2=xi2+yi2r_i^2 = x_i^2 + y_i^2 for each particle: r12=(−0.300)2+(0.200)2=0.090+0.040=0.130 m2r_1^2 = (-0.300)^2 + (0.200)^2 = 0.090 + 0.040 = 0.130\text{ m}^2.

  2. Compute r22=(0.500)2+(−0.100)2=0.250+0.010=0.260 m2r_2^2 = (0.500)^2 + (-0.100)^2 = 0.250 + 0.010 = 0.260\text{ m}^2.

  3. Compute r32=(−0.200)2+(−0.400)2=0.040+0.160=0.200 m2r_3^2 = (-0.200)^2 + (-0.400)^2 = 0.040 + 0.160 = 0.200\text{ m}^2.

  4. Sum the squared distances: ∑ri2=0.130+0.260+0.200=0.590 m2\sum r_i^2 = 0.130 + 0.260 + 0.200 = 0.590\text{ m}^2.

  5. Multiply by the particle mass m=0.400 kgm = 0.400\text{ kg}: Iz=0.400×0.590=0.236 kg⋅m2I_z = 0.400 \times 0.590 = 0.236\text{ kg}\cdot\text{m}^2.

Final answer

(a) Iz=0.236 kg⋅m2I_z = 0.236\text{ kg}\cdot\text{m}^2; (b) Because ri2=xi2+yi2r_i^2 = x_i^2 + y_i^2 and (−u)2=u2≥0(-u)^2 = u^2 \ge 0 for any real number uu, each particle contributes a strictly positive term mi(xi2+yi2)>0m_i(x_i^2 + y_i^2) > 0 to the total rotational inertia.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice computing rotational inertia for discrete point masses by setting up a table of xix_i, yiy_i, ri2r_i^2, and miri2m_i r_i^2 for each particle.

  • Review the parallel-axis theorem to see how the center of mass relates to rotational inertia without collapsing masses incorrectly.

Lock it in

Similar question

01

A particle of mass m=0.50 kgm = 0.50\text{ kg} is located at (x,y)=(−3.0 m,−4.0 m)(x, y) = (-3.0\text{ m}, -4.0\text{ m}). Calculate its moment of inertia IzI_z about the zz-axis perpendicular to the xyxy-plane through the origin.

Answer

Iz=12.5 kg⋅m2I_z = 12.5\text{ kg}\cdot\text{m}^2. Key steps: r2=(−3.0)2+(−4.0)2=9.0+16.0=25 m2r^2 = (-3.0)^2 + (-4.0)^2 = 9.0 + 16.0 = 25\text{ m}^2; Iz=mr2=(0.50 kg)(25 m2)=12.5 kg⋅m2I_z = m r^2 = (0.50\text{ kg})(25\text{ m}^2) = 12.5\text{ kg}\cdot\text{m}^2.

02

Two particles, each of mass m=0.20 kgm = 0.20\text{ kg}, are located at (2.0 m,−1.0 m)(2.0\text{ m}, -1.0\text{ m}) and (−2.0 m,1.0 m)(-2.0\text{ m}, 1.0\text{ m}). (a) Calculate the total moment of inertia IzI_z about the zz-axis. (b) How do their individual contributions compare?

Answer

(a) Iz=2.0 kg⋅m2I_z = 2.0\text{ kg}\cdot\text{m}^2; (b) Their contributions are equal (1.0 kg⋅m21.0\text{ kg}\cdot\text{m}^2 each). Key steps: r12=(2.0)2+(−1.0)2=5.0 m2r_1^2 = (2.0)^2 + (-1.0)^2 = 5.0\text{ m}^2; r22=(−2.0)2+(1.0)2=5.0 m2r_2^2 = (-2.0)^2 + (1.0)^2 = 5.0\text{ m}^2; Iz=0.20(5.0+5.0)=2.0 kg⋅m2I_z = 0.20(5.0 + 5.0) = 2.0\text{ kg}\cdot\text{m}^2.

03

Three identical particles of mass m=1.0 kgm = 1.0\text{ kg} are located at P1=(−a,0)P_1 = (-a, 0), P2=(0,−a)P_2 = (0, -a), and P3=(a,−a)P_3 = (a, -a). Express the moment of inertia of the system about the zz-axis in terms of mm and aa, and verify that all terms are strictly positive.

Answer

Iz=4ma2I_z = 4ma^2. Key steps: r12=(−a)2+02=a2r_1^2 = (-a)^2 + 0^2 = a^2; r22=02+(−a)2=a2r_2^2 = 0^2 + (-a)^2 = a^2; r32=a2+(−a)2=2a2r_3^2 = a^2 + (-a)^2 = 2a^2. Sum of ri2=4a2r_i^2 = 4a^2. Thus Iz=m(4a2)=4ma2I_z = m(4a^2) = 4ma^2. Every squared coordinate (−a)2=+a2>0(-a)^2 = +a^2 > 0.

Loading workspace…