Resources

A student asserts: 'When two conducting spheres touch, charge must always flow from the sphere with the greater net charge to the sphere with the lesser net charge until both have equal amounts of charge.' To test this claim, consider two isolated conducting spheres of different radii: Sphere 11 has radius R1=6.00 cmR_1 = 6.00\text{ cm} and carries an initial charge Q1=+2.00 μCQ_1 = +2.00\,\mu\mathrm{C}; Sphere 22 has radius R2=2.00 cmR_2 = 2.00\text{ cm} and carries an initial charge Q2=+4.00 μCQ_2 = +4.00\,\mu\mathrm{C}. The spheres are positioned far apart and connected by a thin, negligible-capacitance conducting wire until electrostatic equilibrium is established. (a) Identify the physical driving potential that governs charge transfer between conductors. (b) Calculate the final equilibrium charge on each sphere (q1q_1 and q2q_2), and explain why charge flowed in direct opposition to the student's intuition.

Answer and steps

Final answer

(a) Electric potential (V=keQ/RV = k_e Q / R), not net charge QQ, determines the direction of charge flow; (b) q1=+4.50 μCq_1 = +4.50\,\mu\mathrm{C} and q2=+1.50 μCq_2 = +1.50\,\mu\mathrm{C}; charge flowed from Sphere 22 (V2=1.80×106 VV_2 = 1.80 \times 10^6\text{ V}) to Sphere 11 (V1=3.00×105 VV_1 = 3.00 \times 10^5\text{ V}) despite Sphere 11 receiving charge to reach a final value higher than its initial value.

Steps

01

Initial Potentials

Part (a): The Driving Potential for Charge Transfer

Charge transfer between conductors is governed by electric potential (VV), not by the quantity of net charge (QQ).

  • Physical Principle: An isolated conducting sphere of radius RR carrying charge QQ has a surface electric potential given by: V=keQRV = \frac{k_e Q}{R} where ke≈8.99×109 N⋅m2/C2k_e \approx 8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2.
  • When two conductors are connected by a conducting path, mobile positive charge carriers naturally move from a region of higher electric potential to lower electric potential (or electrons move from lower to higher potential).
  • Charge continues to flow until an electrostatic equilibrium is reached, defined by equal electric potentials throughout the connected system: V1=V2V_1 = V_2

Part (b): Calculation of Equilibrium Charges and Analysis

Before the spheres are connected:

  • For Sphere 11 (R1=0.0600 mR_1 = 0.0600\text{ m}, Q1=+2.00 μCQ_1 = +2.00\ \mu\text{C}): V1=(8.99×109 N⋅m2/C2)(2.00×10−6 C)0.0600 m≈3.00×105 VV_1 = \frac{(8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2)(2.00 \times 10^{-6}\text{ C})}{0.0600\text{ m}} \approx 3.00 \times 10^5\text{ V}
  • For Sphere 22 (R2=0.0200 mR_2 = 0.0200\text{ m}, Q2=+4.00 μCQ_2 = +4.00\ \mu\text{C}): V2=(8.99×109 N⋅m2/C2)(4.00×10−6 C)0.0200 m≈1.80×106 VV_2 = \frac{(8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2)(4.00 \times 10^{-6}\text{ C})}{0.0200\text{ m}} \approx 1.80 \times 10^6\text{ V}

Because V2>V1V_2 > V_1, positive charge flows from Sphere 22 to Sphere 11.

02

Equilibrium Charge Distribution

By the law of conservation of charge, the total charge QtotQ_{\text{tot}} remains constant: q1+q2=Q1+Q2=2.00 μC+4.00 μC=6.00 μCq_1 + q_2 = Q_1 + Q_2 = 2.00\ \mu\text{C} + 4.00\ \mu\text{C} = 6.00\ \mu\text{C}

At electrostatic equilibrium, the surface potentials are equal: V1=V2  ⟹  keq1R1=keq2R2V_1 = V_2 \implies \frac{k_e q_1}{R_1} = \frac{k_e q_2}{R_2}

Canceling kek_e yields: q1R1=q2R2  ⟹  q1=R1R2q2\frac{q_1}{R_1} = \frac{q_2}{R_2} \implies q_1 = \frac{R_1}{R_2} q_2

Substitute the given radii: q1=6.00 cm2.00 cmq2=3q2q_1 = \frac{6.00\text{ cm}}{2.00\text{ cm}} q_2 = 3 q_2

Substitute this relation into the total charge equation: 3q2+q2=6.00 μC  ⟹  4q2=6.00 μC3 q_2 + q_2 = 6.00\ \mu\text{C} \implies 4 q_2 = 6.00\ \mu\text{C} q2=+1.50 μCq_2 = +1.50\ \mu\text{C}

Now solve for q1q_1: q1=3(1.50 μC)=+4.50 μCq_1 = 3(1.50\ \mu\text{C}) = +4.50\ \mu\text{C}

03

Why the Student's Claim Fails

The student claimed that charge transfer ceases when both spheres hold equal amounts of charge (3.00 μC3.00\ \mu\text{C} each).

  • If each sphere held 3.00 μC3.00\ \mu\text{C}, their potentials would be: V1=ke(3.00 μC)0.0600 mandV2=ke(3.00 μC)0.0200 m=3V1V_1 = \frac{k_e (3.00\ \mu\text{C})}{0.0600\text{ m}} \quad \text{and} \quad V_2 = \frac{k_e (3.00\ \mu\text{C})}{0.0200\text{ m}} = 3 V_1
  • Because V2V_2 would still be three times larger than V1V_1, charge cannot stop flowing at equal charge. The flow continues well past that point until Sphere 11 ends up with three times as much charge as Sphere 22 (q1=+4.50 μCq_1 = +4.50\ \mu\text{C} vs. q2=+1.50 μCq_2 = +1.50\ \mu\text{C}), completely disproving the idea that conductors always end up with equal charge.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses equal potential at equilibrium with equal charge, assuming identical charges divide equally regardless of differing sphere radii.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Electric potential difference governs charge transfer between conductors.

  2. Step 2

    Qtotal=2.00 \muC+4.00 \muC=6.00 \muCQ_{\text{total}} = 2.00\text{ \mu C} + 4.00\text{ \mu C} = 6.00\text{ \mu C}

  3. Step 3

    q1=q2=Qtotal2=3.00 \muC  ⟹  q1=3.00 \muC and q2=3.00 \muCq_1 = q_2 = \frac{Q_{\text{total}}}{2} = 3.00\text{ \mu C} \implies q_1 = 3.00\text{ \mu C} \text{ and } q_2 = 3.00\text{ \mu C}

    Correct

    V1=V2  ⟹  keq1R1=keq2R2  ⟹  q1=R1R2q2=3q2V_1 = V_2 \implies \frac{k_e q_1}{R_1} = \frac{k_e q_2}{R_2} \implies q_1 = \frac{R_1}{R_2} q_2 = 3 q_2, so 3q2+q2=6.00 \muC  ⟹  q2=+1.50 \muC, q1=+4.50 \muC3 q_2 + q_2 = 6.00\text{ \mu C} \implies q_2 = +1.50\text{ \mu C},\ q_1 = +4.50\text{ \mu C}

    You divided the total charge equally between the spheres. Electrostatic equilibrium requires equal potentials (V1=V2V_1 = V_2), meaning the charges must be proportional to their radii (q1R1=q2R2\frac{q_1}{R_1} = \frac{q_2}{R_2}).

  4. Step 4

    Charge flowed from Sphere 2 to Sphere 1 because Sphere 2 had higher initial potential V2=k(4 \muC)2 cmV_2 = \frac{k(4\text{ \mu C})}{2\text{ cm}} than Sphere 1 V1=k(2 \muC)6 cmV_1 = \frac{k(2\text{ \mu C})}{6\text{ cm}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You stated the correct physical driving quantity for charge transfer.

You used conservation of charge correctly to sum the initial charges.

You showed that the smaller sphere started at a much higher electric potential despite having less than double the charge.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing equal equilibrium potential with equal charge division

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated electrostatic equilibrium as an equal division of net charge (q1=q2=Qtotal2q_1 = q_2 = \frac{Q_{\text{total}}}{2}) rather than an equality of electric potentials (V1=V2V_1 = V_2). Because capacitance scales linearly with radius for a sphere (C=4πε0RC = 4\pi\varepsilon_0 R), conductors of unequal size must hold charges proportional to their radii to reach the same potential.

REASONING PATH
Your ACEpath teacher’s suggested approach
Equilibrium condition for connected conductors
  • Connected conductors reach equilibrium when their electric potentials are equal (V1=V2V_1 = V_2), not when their charges are equal.

  • Set keq1R1=keq2R2\frac{k_e q_1}{R_1} = \frac{k_e q_2}{R_2} instead of assuming q1=q2q_1 = q_2.

Proportional charge sharing
  • For isolated spherical conductors connected by a wire, final charge is directly proportional to radius: q1q2=R1R2\frac{q_1}{q_2} = \frac{R_1}{R_2}.

  • Express q1q_1 in terms of q2q_2 using the radius ratio before substituting into q1+q2=Qtotalq_1 + q_2 = Q_{\text{total}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the equilibrium potentials equal: V1=V2  ⟹  keq1R1=keq2R2V_1 = V_2 \implies \frac{k_e q_1}{R_1} = \frac{k_e q_2}{R_2}.

  2. Relate the charges using the radii: q1=R1R2q2=6.00 cm2.00 cmq2=3q2q_1 = \frac{R_1}{R_2} q_2 = \frac{6.00\text{ cm}}{2.00\text{ cm}} q_2 = 3 q_2.

  3. Substitute into the total charge conservation equation: q1+q2=3q2+q2=4q2=6.00 \muCq_1 + q_2 = 3 q_2 + q_2 = 4 q_2 = 6.00\text{ \mu C}.

  4. Solve for each final charge: q2=+1.50 \muCq_2 = +1.50\text{ \mu C} and q1=3(1.50 \muC)=+4.50 \muCq_1 = 3(1.50\text{ \mu C}) = +4.50\text{ \mu C}.

Final answer

q1=+4.50 \muCq_1 = +4.50\text{ \mu C} and q2=+1.50 \muCq_2 = +1.50\text{ \mu C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how capacitance of an isolated sphere (C=4πε0RC = 4\pi\varepsilon_0 R) leads to Q=CVQ = CV, so q∝Rq \propto R at constant potential.

  • Practice distributing charge between conductors of unequal size by always starting from V1=V2V_1 = V_2.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the radius dependence when equating potentials, setting q₁·R₁ = q₂·R₂ instead of q₁/R₁ = q₂/R₂.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Electric potential  ⟹  V1=V2\text{Electric potential} \implies V_1 = V_2

  2. Step 2

    q1⋅R1=q2⋅R2  ⟹  q1⋅(6.00 cm)=q2⋅(2.00 cm)  ⟹  q2=3⋅q1q_1 \cdot R_1 = q_2 \cdot R_2 \implies q_1 \cdot (6.00\text{ cm}) = q_2 \cdot (2.00\text{ cm}) \implies q_2 = 3 \cdot q_1

    Correct

    keq1R1=keq2R2  ⟹  q1R1=q2R2  ⟹  q1=R1R2q2=3q2\frac{k_e q_1}{R_1} = \frac{k_e q_2}{R_2} \implies \frac{q_1}{R_1} = \frac{q_2}{R_2} \implies q_1 = \frac{R_1}{R_2} q_2 = 3 q_2

    The electric potential of a conducting sphere is V=keqRV = \frac{k_e q}{R}, which is inversely proportional to radius. Equating potentials gives q1R1=q2R2\frac{q_1}{R_1} = \frac{q_2}{R_2}, meaning the larger sphere holds more charge in direct proportion to its radius, not less.

  3. Step 3

    q1+q2=2.00 μC+4.00 μC=6.00 μC  ⟹  q1+3⋅q1=6.00 μC  ⟹  q1=1.50 μC, q2=4.50 μCq_1 + q_2 = 2.00\ \mu\text{C} + 4.00\ \mu\text{C} = 6.00\ \mu\text{C} \implies q_1 + 3 \cdot q_1 = 6.00\ \mu\text{C} \implies q_1 = 1.50\ \mu\text{C},\ q_2 = 4.50\ \mu\text{C}

    Correct

    q1+q2=6.00 μC  ⟹  3q2+q2=6.00 μC  ⟹  q2=+1.50 μC, q1=+4.50 μCq_1 + q_2 = 6.00\ \mu\text{C} \implies 3 q_2 + q_2 = 6.00\ \mu\text{C} \implies q_2 = +1.50\ \mu\text{C},\ q_1 = +4.50\ \mu\text{C}

    You applied the principle of charge conservation correctly, but because of the inverted radius ratio from the previous step, your final numerical charges for the two spheres were swapped.

  4. Step 4

    Charge flowed from Sphere 1 to Sphere 2 because Sphere 2 ended up with more charge.\text{Charge flowed from Sphere 1 to Sphere 2 because Sphere 2 ended up with more charge.}

    Correct

    Initial potentials were V1=3.00×105 V and V2=1.80×106 V. Since V2>V1, positive charge flowed from Sphere 2 to Sphere 1.\text{Initial potentials were } V_1 = 3.00 \times 10^5\text{ V} \text{ and } V_2 = 1.80 \times 10^6\text{ V}. \text{ Since } V_2 > V_1, \text{ positive charge flowed from Sphere 2 to Sphere 1.}

    Charge flow is determined by initial potential differences, not by which sphere ends up with more net charge. Sphere 2 started at a much higher potential (1.80×106 V1.80 \times 10^6\text{ V} vs. 3.00×105 V3.00 \times 10^5\text{ V}), so positive charge actually moved from Sphere 2 to Sphere 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that electric potential is the driving factor for charge transfer.

You stated that electrostatic equilibrium requires equal potentials (V1=V2V_1 = V_2).

You correctly applied the conservation of total charge (q1+q2=6.00 μCq_1 + q_2 = 6.00\ \mu\text{C}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted proportionality in potential formula

You set q1R1=q2R2q_1 R_1 = q_2 R_2 instead of equating the potentials as ratios q1R1=q2R2\frac{q_1}{R_1} = \frac{q_2}{R_2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated potential as directly proportional to radius rather than remembering the inverse-distance dependence V=keqRV = \frac{k_e q}{R}, which inverted the charge-to-radius ratio.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sphere Potential Formula
  • For an isolated spherical conductor, electric potential on the surface is V=keqRV = \frac{k_e q}{R} (or q=CVq = C V where C=4πε0RC = 4\pi\varepsilon_0 R).

  • Always write down the full formula V=keqRV = \frac{k_e q}{R} before canceling constants to ensure RR stays in the denominator.

Equal Potential Scaling
  • When connected conductors reach equilibrium (V1=V2V_1 = V_2), charge is directly proportional to radius: q1q2=R1R2\frac{q_1}{q_2} = \frac{R_1}{R_2}.

  • Check your result against physical intuition: larger conductors have greater capacitance and must store more charge at the same potential.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the condition for electrostatic equilibrium: V1=V2  ⟹  keq1R1=keq2R2V_1 = V_2 \implies \frac{k_e q_1}{R_1} = \frac{k_e q_2}{R_2}.

  2. Cancel Coulomb's constant kek_e to get the direct ratio: q1R1=q2R2  ⟹  q1=R1R2q2=6.00 cm2.00 cmq2=3q2\frac{q_1}{R_1} = \frac{q_2}{R_2} \implies q_1 = \frac{R_1}{R_2} q_2 = \frac{6.00\text{ cm}}{2.00\text{ cm}} q_2 = 3 q_2.

  3. Substitute q1=3q2q_1 = 3 q_2 into total charge conservation: 3q2+q2=6.00 μC  ⟹  4q2=6.00 μC3 q_2 + q_2 = 6.00\ \mu\text{C} \implies 4 q_2 = 6.00\ \mu\text{C}, yielding q2=+1.50 μCq_2 = +1.50\ \mu\text{C} and q1=+4.50 μCq_1 = +4.50\ \mu\text{C}.

Final answer

(a) Electric potential (V=keQ/RV = k_e Q / R). (b) q1=+4.50 μCq_1 = +4.50\ \mu\text{C} and q2=+1.50 μCq_2 = +1.50\ \mu\text{C}; positive charge flowed from Sphere 2 to Sphere 1 because Sphere 2 had a much higher initial potential (1.80×106 V1.80 \times 10^6\text{ V} vs. 3.00×105 V3.00 \times 10^5\text{ V}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the capacitance of an isolated sphere (C=4πε0RC = 4\pi\varepsilon_0 R) to see why charge is directly proportional to radius when potential is equal.

  • Practice checking whether initial potentials correctly predict the direction of positive and negative charge movement.

OverviewACEpath Teacher's Diagnosis

03 The student confuses electric potential with electric charge, asserting that charge itself is the driving potential and flows until net charges are equal.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Net electric charge difference is the physical driving potential that governs charge transfer.

    Correct

    Electric potential (V=keQRV = \frac{k_e Q}{R}), or electric potential difference (ΔV\Delta V), governs charge transfer.

    Charge flow between connected conductors is driven by a difference in electric potential (voltage), not by a difference in net charge quantity.

  2. Step 2

    Total charge=2.00 \muC+4.00 \muC=6.00 \muC\text{Total charge} = 2.00\text{ \mu C} + 4.00\text{ \mu C} = 6.00\text{ \mu C}

  3. Step 3

    q1=3.00 \muC,q2=3.00 \muCq_1 = 3.00\text{ \mu C},\quad q_2 = 3.00\text{ \mu C}

    Correct

    V1=V2  ⟹  keq1R1=keq2R2  ⟹  q1=3q2  ⟹  q1=+4.50 \muC,q2=+1.50 \muCV_1 = V_2 \implies \frac{k_e q_1}{R_1} = \frac{k_e q_2}{R_2} \implies q_1 = 3q_2 \implies q_1 = +4.50\text{ \mu C},\quad q_2 = +1.50\text{ \mu C}

    Conductors share charge until their surface potentials are equal (V1=V2V_1 = V_2), which requires q1R1=q2R2\frac{q_1}{R_1} = \frac{q_2}{R_2}. Because the radii are unequal (R1=3R2R_1 = 3R_2), the equilibrium charges are not equal.

  4. Step 4

    Charge flowed from Sphere 2 to Sphere 1 because Sphere 2 started with 4.00 \muC4.00\text{ \mu C} which is greater than 2.00 \muC2.00\text{ \mu C}, supporting rather than opposing intuition.

    Correct

    Charge flows because V2=1.80×106 V>V1=3.00×105 VV_2 = 1.80 \times 10^6\text{ V} > V_1 = 3.00 \times 10^5\text{ V}, and flow continues past equal charge until Sphere 1 holds +4.50 \muC+4.50\text{ \mu C}, exceeding Sphere 2's starting charge and contradicting the intuition that charge amounts equalize.

    Although charge initially moves from Sphere 2 to Sphere 1, it continues flowing past the 3.00 \muC3.00\text{ \mu C} mark until Sphere 1 has three times the charge of Sphere 2 (4.50 \muC4.50\text{ \mu C} vs. 1.50 \muC1.50\text{ \mu C}). This directly refutes the intuition that charge balances equally.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the conservation of charge to determine that the system's total charge is 6.00 \muC6.00\text{ \mu C}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing electric charge with electric potential
WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that charge transfer equalizes net charge rather than electric potential. When conducting spheres reach electrostatic equilibrium, their electric potentials must be equal (V=keqRV = \frac{k_e q}{R}), which means charge divides in direct proportion to radius rather than splitting into equal halves.

REASONING PATH
Your ACEpath teacher’s suggested approach
Equilibrium Condition
  • Connected conductors reach equilibrium when their electric potentials are equal: V1=V2V_1 = V_2.

  • Always set up keq1R1=keq2R2\frac{k_e q_1}{R_1} = \frac{k_e q_2}{R_2} instead of setting q1=q2q_1 = q_2.

Charge Partitioning
  • For spherical conductors connected by a wire, q1q2=R1R2\frac{q_1}{q_2} = \frac{R_1}{R_2}.

  • Combine the potential-equality ratio with total charge conservation q1+q2=Qtotq_1 + q_2 = Q_{\text{tot}} to solve for each final charge.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Equate the surface potentials at electrostatic equilibrium: V1=V2  ⟹  keq1R1=keq2R2V_1 = V_2 \implies \frac{k_e q_1}{R_1} = \frac{k_e q_2}{R_2}

  2. Substitute the radii R1=6.00 cmR_1 = 6.00\text{ cm} and R2=2.00 cmR_2 = 2.00\text{ cm} to find the ratio: q1=R1R2q2=3q2q_1 = \frac{R_1}{R_2}q_2 = 3q_2

  3. Substitute q1=3q2q_1 = 3q_2 into total charge conservation: 3q2+q2=6.00 \muC  ⟹  4q2=6.00 \muC3q_2 + q_2 = 6.00\text{ \mu C} \implies 4q_2 = 6.00\text{ \mu C}

  4. Solve for each charge: q2=+1.50 \muCq_2 = +1.50\text{ \mu C} and q1=3(1.50 \muC)=+4.50 \muCq_1 = 3(1.50\text{ \mu C}) = +4.50\text{ \mu C}

Final answer

(a) Electric potential difference governs charge transfer; (b) q1=+4.50 \muCq_1 = +4.50\text{ \mu C} and q2=+1.50 \muCq_2 = +1.50\text{ \mu C}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of electric potential on a conducting sphere: V=keQRV = \frac{k_e Q}{R}.

  • Practice solving charge distribution problems where connected conductors have unequal radii.

Lock it in

Similar question

01

Two isolated conducting spheres of radii RA=5.0 cmR_A = 5.0\text{ cm} and RB=15.0 cmR_B = 15.0\text{ cm} carry initial charges of +10.0 \muC+10.0\text{ \mu C} and −2.0 \muC-2.0\text{ \mu C}, respectively. They are momentarily connected by a thin conducting wire. Find the final charge on each sphere.

Answer

qA=+2.0 \muCq_A = +2.0\text{ \mu C} and qB=+6.0 \muCq_B = +6.0\text{ \mu C}. Total charge is Qtot=+10.0+(−2.0)=+8.0 \muCQ_{\text{tot}} = +10.0 + (-2.0) = +8.0\text{ \mu C}. Equal potential gives qA/RA=qB/RB  ⟹  qB=3qAq_A / R_A = q_B / R_B \implies q_B = 3 q_A. Substituting yields 4qA=8.0 \muC4 q_A = 8.0\text{ \mu C}, so qA=+2.0 \muCq_A = +2.0\text{ \mu C} and qB=+6.0 \muCq_B = +6.0\text{ \mu C}.

02

Sphere 1 (R1=4.0 cmR_1 = 4.0\text{ cm}) has charge +6.0 \muC+6.0\text{ \mu C}, and Sphere 2 (R2=12.0 cmR_2 = 12.0\text{ cm}) is initially uncharged (Q2=0Q_2 = 0). After connecting them with a conducting wire, which sphere has the larger surface charge density σ\sigma, and what is the ratio σ1/σ2\sigma_1 / \sigma_2?

Answer

Sphere 1 has the larger surface charge density; σ1/σ2=3\sigma_1 / \sigma_2 = 3. At equilibrium, q1/q2=R1/R2=4/12=1/3q_1 / q_2 = R_1 / R_2 = 4/12 = 1/3. Surface charge density is σ=q/(4πR2)\sigma = q / (4\pi R^2), so σ1/σ2=(q1/q2)×(R2/R1)2=(1/3)×32=3\sigma_1 / \sigma_2 = (q_1 / q_2) \times (R_2 / R_1)^2 = (1/3) \times 3^2 = 3.

03

A metal sphere of radius R1=2.0 cmR_1 = 2.0\text{ cm} carrying charge +9.0 nC+9.0\text{ nC} touches an uncharged metal sphere of unknown radius R2R_2. After separation, the 2.0 cm2.0\text{ cm} sphere carries +1.8 nC+1.8\text{ nC}. Determine the radius R2R_2 of the second sphere.

Answer

R2=8.0 cmR_2 = 8.0\text{ cm}. By charge conservation, q2=9.0 nC−1.8 nC=7.2 nCq_2 = 9.0\text{ nC} - 1.8\text{ nC} = 7.2\text{ nC}. Since V1=V2V_1 = V_2, q1/R1=q2/R2  ⟹  R2=R1(q2/q1)=2.0 cm×(7.2/1.8)=8.0 cmq_1 / R_1 = q_2 / R_2 \implies R_2 = R_1 (q_2 / q_1) = 2.0\text{ cm} \times (7.2 / 1.8) = 8.0\text{ cm}.

Loading workspace…