Resources

A physics laboratory cart of mass m=1.80 kgm = 1.80\text{ kg} is released from rest at the top of an inclined plane inclined at an angle θ=25.0∘\theta = 25.0^\circ above the horizontal. While sliding down the track, the cart experiences a kinetic friction force from the surface with coefficient μk=0.120\mu_k = 0.120, an aerodynamic drag force Fd=0.350 NF_d = 0.350\text{ N} opposing motion, and the downward pull of Earth's gravity with g=9.80 m/s2g = 9.80\text{ m/s}^2. (a) Classify each of the three acting forces as either a contact force or a non-contact (field) force. (b) Calculate the net acceleration aa of the cart down the incline.

Answer and steps

Final answer

(a) Kinetic friction: contact force; Aerodynamic drag: contact force; Gravitational force: non-contact force; (b) a=2.90 m/s2a = 2.90\text{ m/s}^2

Steps

01

Define the Coordinate System

Part (a): Classification of Forces

Forces are broadly divided into two categories based on whether physical contact is required between the interacting bodies:

  1. Kinetic Friction Force (fkf_k):
    • Classification: Contact force
    • Basis: Friction arises at the microscopic level from electrostatic interactions and mechanical interlocking between the surface of the inclined plane and the surface of the cart in direct physical contact.
  2. Aerodynamic Drag Force (FdF_d):
    • Classification: Contact force
    • Basis: Aerodynamic drag is a fluid resistance force resulting from direct mechanical collisions and shear stresses between the external surface of the moving cart and the surrounding air molecules.
  3. Gravitational Force (FgF_g):
    • Classification: Non-contact (field) force
    • Basis: Gravity is a fundamental field force exerted by Earth on the cart through spacetime without requiring any physical contact between the two bodies.

Part (b): Net Acceleration Down the Incline

Align the axes with the inclined plane:

  • +x+x-axis directed down the incline, parallel to the surface.
  • +y+y-axis directed perpendicular to and away from the incline surface.
02

Analyze Forces Perpendicular to the Incline (yy-axis)

Because there is no acceleration perpendicular to the track (ay=0a_y = 0): ∑Fy=N−mgcos⁡θ=0\sum F_y = N - mg\cos\theta = 0 N=mgcos⁡θN = mg\cos\theta

Substitute the given values: N=(1.80 kg)(9.80 m/s2)cos⁡(25.0∘)≈17.64×0.9063≈15.99 NN = (1.80\text{ kg})(9.80\text{ m/s}^2)\cos(25.0^\circ) \approx 17.64 \times 0.9063 \approx 15.99\text{ N}

03

Determine the Opposing Forces Along the Incline

  • Kinetic friction (fkf_k): Acts up the incline, opposing the downward motion: fk=μkN=0.120×15.99 N≈1.92 Nf_k = \mu_k N = 0.120 \times 15.99\text{ N} \approx 1.92\text{ N}
  • Aerodynamic drag (FdF_d): Also acts up the incline, opposing the downward motion: Fd=0.350 NF_d = 0.350\text{ N}
04

Determine the Driving Force Along the Incline

The component of gravity pulling the cart down the plane is: Fg,x=mgsin⁡θ=(1.80 kg)(9.80 m/s2)sin⁡(25.0∘)≈17.64×0.4226≈7.46 NF_{g,x} = mg\sin\theta = (1.80\text{ kg})(9.80\text{ m/s}^2)\sin(25.0^\circ) \approx 17.64 \times 0.4226 \approx 7.46\text{ N}

05

Apply Newton's Second Law Along the Incline (xx-axis)

∑Fx=mgsin⁡θ−fk−Fd=ma\sum F_x = mg\sin\theta - f_k - F_d = ma

Substitute the forces into the net force equation: Fnet=7.46 N−1.92 N−0.350 N≈5.19 NF_{\text{net}} = 7.46\text{ N} - 1.92\text{ N} - 0.350\text{ N} \approx 5.19\text{ N}

Solve for the acceleration aa: a=Fnetm=5.19 N1.80 kg≈2.90 m/s2a = \frac{F_{\text{net}}}{m} = \frac{5.19\text{ N}}{1.80\text{ kg}} \approx 2.90\text{ m/s}^2

(Pitfall to avoid: Do not omit the normal force when calculating friction, and ensure the normal force is computed using mgcos⁡θmg\cos\theta rather than the full weight mgmg.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the trigonometric components on an inclined plane by using cosine instead of sine for the parallel gravitational force and sine for the normal force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Gravity: non-contact force Kinetic friction: contact force Aerodynamic drag: contact force

  2. Step 2

    Fgx=m⋅g⋅cos⁡(25.0∘)=1.80⋅9.80⋅cos⁡(25.0∘)=15.996 N  ⟹  FN=m⋅g⋅sin⁡(25.0∘)=1.80⋅9.80⋅sin⁡(25.0∘)=7.462 NF_{gx} = m \cdot g \cdot \cos(25.0^\circ) = 1.80 \cdot 9.80 \cdot \cos(25.0^\circ) = 15.996\text{ N} \implies F_N = m \cdot g \cdot \sin(25.0^\circ) = 1.80 \cdot 9.80 \cdot \sin(25.0^\circ) = 7.462\text{ N}

    Correct

    Fgx=mgsin⁡θ=(1.80)(9.80)sin⁡(25.0∘)≈7.46 N  ⟹  FN=mgcos⁡θ=(1.80)(9.80)cos⁡(25.0∘)≈15.99 NF_{gx} = mg\sin\theta = (1.80)(9.80)\sin(25.0^\circ) \approx 7.46\text{ N} \implies F_N = mg\cos\theta = (1.80)(9.80)\cos(25.0^\circ) \approx 15.99\text{ N}

    You swapped the trigonometric functions for an inclined plane. Because the incline angle θ\theta is measured from the horizontal, the component perpendicular to the surface is adjacent to θ\theta (FN=mgcos⁡θF_N = mg\cos\theta), and the component pulling down the incline is opposite θ\theta (Fgx=mgsin⁡θF_{gx} = mg\sin\theta).

  3. Step 3

    Fk=0.120⋅7.462=0.895 NF_k = 0.120 \cdot 7.462 = 0.895\text{ N}

    Correct

    fk=μkFN=0.120⋅15.99 N≈1.92 Nf_k = \mu_k F_N = 0.120 \cdot 15.99\text{ N} \approx 1.92\text{ N}

    Your formula for friction is correct, but your numerical value was affected by substituting the incorrect normal force from the previous step.

  4. Step 4

    Fnet=15.996−0.895−0.350=14.751 N  ⟹  a=14.751/1.80=8.19 m/s2F_{\text{net}} = 15.996 - 0.895 - 0.350 = 14.751\text{ N} \implies a = 14.751 / 1.80 = 8.19\text{ m/s}^2

    Correct

    Fnet=7.46 N−1.92 N−0.350 N=5.19 N  ⟹  a=5.19 N1.80 kg≈2.90 m/s2F_{\text{net}} = 7.46\text{ N} - 1.92\text{ N} - 0.350\text{ N} = 5.19\text{ N} \implies a = \frac{5.19\text{ N}}{1.80\text{ kg}} \approx 2.90\text{ m/s}^2

    You correctly formulated Newton's second law by subtracting the resistive forces from the driving parallel component, but your final acceleration is affected by the earlier swapped trigonometric components.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified all three forces as contact or non-contact forces.

You correctly set up Newton's second law along the incline by opposing the downhill gravity component with friction and drag.

You correctly applied the relationship fk=μkFNf_k = \mu_k F_N.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Confusion on Incline

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used cosine for the component parallel to the ramp and sine for the component perpendicular to the ramp, reversing the standard geometric decomposition where the incline angle is measured relative to the horizontal.

REASONING PATH
Your ACEpath teacher’s suggested approach
Angle Geometry on an Incline
  • When an incline is angled at θ\theta above the horizontal, the angle between the downward weight vector mgm\mathbf{g} and the surface normal is also θ\theta.

  • Draw the right triangle formed by the weight vector and its perpendicular and parallel components, and check which component is adjacent to θ\theta.

Sanity Check with Extreme Angles
  • As the incline angle approaches θ=0∘\theta = 0^\circ (flat ground), the parallel pulling force must vanish (mgsin⁡0∘=0mg\sin 0^\circ = 0) and the normal force must balance the full weight (mgcos⁡0∘=mgmg\cos 0^\circ = mg).

  • Test θ=0∘\theta = 0^\circ on your formulas to ensure your parallel component uses sine and your normal component uses cosine.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Resolve gravity correctly: Fgx=mgsin⁡(25.0∘)=(1.80 kg)(9.80 m/s2)sin⁡(25.0∘)≈7.46 NF_{gx} = mg\sin(25.0^\circ) = (1.80\text{ kg})(9.80\text{ m/s}^2)\sin(25.0^\circ) \approx 7.46\text{ N} and FN=mgcos⁡(25.0∘)=(1.80 kg)(9.80 m/s2)cos⁡(25.0∘)≈15.99 NF_N = mg\cos(25.0^\circ) = (1.80\text{ kg})(9.80\text{ m/s}^2)\cos(25.0^\circ) \approx 15.99\text{ N}.

  2. Calculate the kinetic friction force: fk=μkFN=0.120⋅15.99 N≈1.92 Nf_k = \mu_k F_N = 0.120 \cdot 15.99\text{ N} \approx 1.92\text{ N}.

  3. Find the net downhill force: Fnet=Fgx−fk−Fd=7.46 N−1.92 N−0.350 N≈5.19 NF_{\text{net}} = F_{gx} - f_k - F_d = 7.46\text{ N} - 1.92\text{ N} - 0.350\text{ N} \approx 5.19\text{ N}.

  4. Calculate the acceleration: a=Fnetm=5.19 N1.80 kg≈2.90 m/s2a = \frac{F_{\text{net}}}{m} = \frac{5.19\text{ N}}{1.80\text{ kg}} \approx 2.90\text{ m/s}^2.

Final answer

a≈2.90 m/s2a \approx 2.90\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the right triangle for the weight vector on every incline problem to visually confirm that the adjacent leg is perpendicular to the ramp (mgcos⁡θmg\cos\theta).

  • Use the θ→0∘\theta \to 0^\circ limiting-case check before plugging numbers into your calculator.

OverviewACEpath Teacher's Diagnosis

02 The student assumes the normal force equals full weight m*g rather than resolving it perpendicular to the inclined plane.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Gravity: non-contact force Kinetic friction: contact force Aerodynamic drag: contact force

  2. Step 2

    Fgx=1.80×9.80×sin⁡(25.0∘)=7.462 NF_{gx} = 1.80 \times 9.80 \times \sin(25.0^\circ) = 7.462\text{ N}

  3. Step 3

    FN=m×g=1.80×9.80=17.64 NF_N = m \times g = 1.80 \times 9.80 = 17.64\text{ N}

    Correct

    FN=mgcos⁡θ=1.80 kg×9.80 m/s2×cos⁡(25.0∘)≈15.99 NF_N = mg\cos\theta = 1.80\text{ kg} \times 9.80\text{ m/s}^2 \times \cos(25.0^\circ) \approx 15.99\text{ N}

    You set the normal force equal to the full gravitational weight mgmg. Because the cart is on a ramp angled at θ=25.0∘\theta = 25.0^\circ, the surface supports only the perpendicular component of gravity, so FN=mgcos⁡θF_N = mg\cos\theta.

  4. Step 4

    Fk=0.120×17.64=2.117 NF_k = 0.120 \times 17.64 = 2.117\text{ N}

    Correct

    fk=μkFN=0.120×15.99 N≈1.92 Nf_k = \mu_k F_N = 0.120 \times 15.99\text{ N} \approx 1.92\text{ N}

    You applied the friction definition fk=μkFNf_k = \mu_k F_N correctly, but your numerical result was affected by the incorrect normal force.

  5. Step 5

    Fnet=7.462−2.117−0.350=4.995 N  ⟹  a=4.995/1.80=2.78 m/s2F_{\text{net}} = 7.462 - 2.117 - 0.350 = 4.995\text{ N} \implies a = 4.995 / 1.80 = 2.78\text{ m/s}^2

    Correct

    Fnet=7.462−1.919−0.350≈5.19 N  ⟹  a=5.19 N1.80 kg≈2.90 m/s2F_{\text{net}} = 7.462 - 1.919 - 0.350 \approx 5.19\text{ N} \implies a = \frac{5.19\text{ N}}{1.80\text{ kg}} \approx 2.90\text{ m/s}^2

    Your setup for Newton's second law along the incline was entirely sound, but the inherited friction value altered your final acceleration.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately distinguished between contact forces and field forces.

You used the correct sine component for the parallel driving force of gravity.

You set up the net force equation down the incline with all opposing forces subtracted correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Normal force resolution error on an incline

You used FN=mgF_N = mg instead of resolving gravity perpendicular to the inclined plane.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the normal force as equal to the total weight, overlooking that an inclined surface only balances the perpendicular component of gravity, mgcos⁡θmg\cos\theta, when no other perpendicular forces are present.

REASONING PATH
Your ACEpath teacher’s suggested approach
Perpendicular Equilibrium
  • Along an inclined plane tilted at angle θ\theta, ∑Fy=FN−mgcos⁡θ=0\sum F_y = F_N - mg\cos\theta = 0 when there is no perpendicular motion or additional perpendicular applied force.

  • Always resolve the weight vector into components parallel (mgsin⁡θmg\sin\theta) and perpendicular (mgcos⁡θmg\cos\theta) to the plane before writing the normal force.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. FN=mgcos⁡(25.0∘)=(1.80 kg)(9.80 m/s2)cos⁡(25.0∘)≈15.99 NF_N = mg\cos(25.0^\circ) = (1.80\text{ kg})(9.80\text{ m/s}^2)\cos(25.0^\circ) \approx 15.99\text{ N}

  2. fk=μkFN=0.120×15.99 N≈1.919 Nf_k = \mu_k F_N = 0.120 \times 15.99\text{ N} \approx 1.919\text{ N}

  3. Fnet=mgsin⁡(25.0∘)−fk−Fd=7.462 N−1.919 N−0.350 N≈5.193 NF_{\text{net}} = mg\sin(25.0^\circ) - f_k - F_d = 7.462\text{ N} - 1.919\text{ N} - 0.350\text{ N} \approx 5.193\text{ N}

  4. a=Fnetm=5.193 N1.80 kg≈2.90 m/s2a = \frac{F_{\text{net}}}{m} = \frac{5.193\text{ N}}{1.80\text{ kg}} \approx 2.90\text{ m/s}^2

Final answer

(a) Kinetic friction: contact force; Aerodynamic drag: contact force; Gravitational force: non-contact force; (b) a=2.90 m/s2a = 2.90\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a tilted free-body diagram showing axes parallel and perpendicular to the ramp every time you work on an inclined plane.

  • Check that FN=mgcos⁡θF_N = mg\cos\theta decreases as the ramp angle increases from 0∘0^\circ to 90∘90^\circ.

OverviewACEpath Teacher's Diagnosis

03 The student omits the aerodynamic drag force when summing the forces parallel to the incline.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Gravity: non-contact force Kinetic friction: contact force Aerodynamic drag: contact force

  2. Step 2

    Fgx=1.80∗9.80∗sin⁡(25.0∘)=7.462 N  ⟹  FN=1.80∗9.80∗cos⁡(25.0∘)=15.996 NF_{gx} = 1.80 * 9.80 * \sin(25.0^\circ) = 7.462\text{ N} \implies F_N = 1.80 * 9.80 * \cos(25.0^\circ) = 15.996\text{ N}

  3. Step 3

    Fk=0.120∗15.996=1.920 NF_k = 0.120 * 15.996 = 1.920\text{ N}

  4. Step 4

    Fnet=7.462−1.920=5.542 NF_{net} = 7.462 - 1.920 = 5.542\text{ N}

    Correct

    Fnet=Fgx−fk−Fd=7.462 N−1.920 N−0.350 N=5.192 NF_{\text{net}} = F_{gx} - f_k - F_d = 7.462\text{ N} - 1.920\text{ N} - 0.350\text{ N} = 5.192\text{ N}

    You forgot to subtract the given aerodynamic drag force (Fd=0.350 NF_d = 0.350\text{ N}), which also acts up the incline opposite the direction of motion.

  5. Step 5

    a=5.542/1.80=3.08 m/s2a = 5.542 / 1.80 = 3.08\text{ m/s}^2

    Correct

    a=Fnetm=5.192 N1.80 kg≈2.90 m/s2a = \frac{F_{\text{net}}}{m} = \frac{5.192\text{ N}}{1.80\text{ kg}} \approx 2.90\text{ m/s}^2

    You correctly applied Newton's second law (a=Fnet/ma = F_{\text{net}} / m), but the numerical value was affected by omitting the drag force in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified all three acting forces into contact and non-contact forces.

You decomposed the gravitational weight vector correctly into normal and parallel components.

You used the correct normal force to calculate the kinetic friction force.

You applied Newton's second law with the correct algebraic relationship between net force, mass, and acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted opposing force in Newton's second law summation

You solved all intermediate components accurately, but overlooked the given value for aerodynamic drag when writing out the force balance along the incline.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete free-body force checklist along the axis of motion: while aerodynamic drag was recognized and classified in part (a), it was omitted when summing the resisting forces ∑Fx=Fgx−fk−Fd\sum F_x = F_{gx} - f_k - F_d in part (b).

REASONING PATH
Your ACEpath teacher’s suggested approach
Free-Body Force Inventory
  • Every force identified as acting along a chosen coordinate axis must appear in the net force equation ∑Fx=max\sum F_x = ma_x.

  • Before summing forces, count the total number of forces parallel to the plane: gravity component downhill (+x+x), kinetic friction uphill (−x-x), and fluid drag uphill (−x-x).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include all forces parallel to the incline: Fnet=Fgx−fk−FdF_{\text{net}} = F_{gx} - f_k - F_d.

  2. Substitute the calculated and given values: Fnet=7.462 N−1.920 N−0.350 N=5.192 NF_{\text{net}} = 7.462\text{ N} - 1.920\text{ N} - 0.350\text{ N} = 5.192\text{ N}.

  3. Apply Newton's second law: a=Fnetm=5.192 N1.80 kg≈2.90 m/s2a = \frac{F_{\text{net}}}{m} = \frac{5.192\text{ N}}{1.80\text{ kg}} \approx 2.90\text{ m/s}^2.

Final answer

a=2.90 m/s2a = 2.90\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a quick free-body diagram next to your equations and put a checkmark on each force arrow as you write it into ∑Fx\sum F_x.

  • Review the problem statement to ensure every given numerical force value has been accounted for in your net force expression.

Lock it in

Similar question

01

A 3.00 kg3.00\text{ kg} block rests on a frictionless plane inclined at 30.0∘30.0^\circ above the horizontal. Calculate the acceleration of the block down the incline. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

a=4.90 m/s2a = 4.90\text{ m/s}^2. The downhill driving force is F∥=mgsin⁡(30.0∘)F_{\parallel} = mg\sin(30.0^\circ). By Newton's second law, a=mgsin⁡(30.0∘)m=gsin⁡(30.0∘)=9.80⋅0.500=4.90 m/s2a = \frac{mg\sin(30.0^\circ)}{m} = g\sin(30.0^\circ) = 9.80 \cdot 0.500 = 4.90\text{ m/s}^2.

02

A 2.50 kg2.50\text{ kg} box slides down a 20.0∘20.0^\circ incline where the coefficient of kinetic friction is μk=0.250\mu_k = 0.250. Neglecting air resistance, determine the magnitude of the kinetic friction force acting on the box. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

fk=5.76 Nf_k = 5.76\text{ N}. The normal force perpendicular to the incline is FN=mgcos⁡(20.0∘)=(2.50)(9.80)cos⁡(20.0∘)≈23.02 NF_N = mg\cos(20.0^\circ) = (2.50)(9.80)\cos(20.0^\circ) \approx 23.02\text{ N}. The friction force is fk=μkFN=0.250×23.02 N≈5.76 Nf_k = \mu_k F_N = 0.250 \times 23.02\text{ N} \approx 5.76\text{ N}.

03

A 4.00 kg4.00\text{ kg} cart is pulled up a 35.0∘35.0^\circ incline by an applied force of Fpull=32.0 NF_{\text{pull}} = 32.0\text{ N} directed parallel to the incline. If a friction force of 4.50 N4.50\text{ N} opposes the motion, calculate the acceleration of the cart up the incline. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

a=1.25 m/s2a = 1.25\text{ m/s}^2. The gravitational component opposing the upward pull is Fgx=mgsin⁡(35.0∘)=(4.00)(9.80)sin⁡(35.0∘)≈22.48 NF_{gx} = mg\sin(35.0^\circ) = (4.00)(9.80)\sin(35.0^\circ) \approx 22.48\text{ N}. The net force along the incline is Fnet=Fpull−Fgx−fk=32.0 N−22.48 N−4.50 N=5.02 NF_{\text{net}} = F_{\text{pull}} - F_{gx} - f_k = 32.0\text{ N} - 22.48\text{ N} - 4.50\text{ N} = 5.02\text{ N}. Thus, a=5.02 N4.00 kg≈1.25 m/s2a = \frac{5.02\text{ N}}{4.00\text{ kg}} \approx 1.25\text{ m/s}^2.

Loading workspace…