Resources

A conical pendulum consists of a small bob of mass m=0.350 kgm = 0.350\text{ kg} suspended from a rigid ceiling by a lightweight string of length L=0.850 mL = 0.850\text{ m}. The bob revolves in a horizontal circle at a constant speed, maintaining a steady string angle of θ=28.0∘\theta = 28.0^\circ relative to the vertical downward axis. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate (a) the tension in the string and (b) the rotational period TT of the bob's orbital motion.

Answer and steps

Final answer

(a) Tension=3.88 N\text{Tension} = 3.88\text{ N}; (b) T=1.74 sT = 1.74\text{ s}

Steps

Part (a): Finding the Tension in the String

  1. Identify the forces acting on the pendulum bob: The bob experiences two forces:

    • The downward gravitational force: Fg=mgF_g = mg
    • The tension force along the string directed toward the support point: FTF_T
  2. Set up the vertical equilibrium: Because the bob moves in a horizontal plane, there is no acceleration in the vertical direction (ay=0a_y = 0). Resolving the tension into vertical and horizontal components: FTcos⁡θ=mgF_T \cos\theta = mg
  3. Solve for the tension FTF_T: FT=mgcos⁡θF_T = \frac{mg}{\cos\theta}
  4. Substitute the given values: FT=(0.350 kg)(9.80 m/s2)cos⁡(28.0∘)=3.43 N0.88295≈3.88 NF_T = \frac{(0.350\text{ kg})(9.80\text{ m/s}^2)}{\cos(28.0^\circ)} = \frac{3.43\text{ N}}{0.88295} \approx 3.88\text{ N}

Part (b): Finding the Rotational Period TT

  1. Relate the horizontal force to centripetal acceleration: The horizontal component of the tension points toward the center of the circular path and provides the necessary centripetal force: Fnet,x=FTsin⁡θ=mac=mω2rF_{\text{net}, x} = F_T \sin\theta = m a_c = m \omega^2 r where rr is the radius of the horizontal circular path and ω=2πT\omega = \frac{2\pi}{T} is the angular speed.
  2. Express the radius in terms of string length LL: From the geometry of the right triangle formed by the string: r=Lsin⁡θr = L \sin\theta
  3. Derive the expression for the period TT: Substitute FT=mgcos⁡θF_T = \frac{mg}{\cos\theta} and r=Lsin⁡θr = L \sin\theta into the centripetal force equation: (mgcos⁡θ)sin⁡θ=m(2πT)2(Lsin⁡θ)\left(\frac{mg}{\cos\theta}\right) \sin\theta = m \left(\frac{2\pi}{T}\right)^2 (L \sin\theta)

    Divide both sides by msin⁡θm \sin\theta: gcos⁡θ=4π2LT2\frac{g}{\cos\theta} = \frac{4\pi^2 L}{T^2}

    Rearranging for TT: T=2πLcos⁡θgT = 2\pi \sqrt{\frac{L \cos\theta}{g}}

    Common Pitfall: Do not use LL in place of the effective vertical height h=Lcos⁡θh = L \cos\theta. For a conical pendulum, the period depends on the vertical distance from the support to the plane of rotation, not the full string length.

  4. Calculate the numerical value: h=Lcos⁡θ=(0.850 m)cos⁡(28.0∘)≈0.7505 mh = L \cos\theta = (0.850\text{ m})\cos(28.0^\circ) \approx 0.7505\text{ m} T=2π0.7505 m9.80 m/s2≈2π0.07658 s2≈1.74 sT = 2\pi \sqrt{\frac{0.7505\text{ m}}{9.80\text{ m/s}^2}} \approx 2\pi \sqrt{0.07658\text{ s}^2} \approx 1.74\text{ s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the sine and cosine projections of the string angle with the vertical, using sine for the vertical component and cosine for the horizontal component.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T⋅sin⁡(28.0∘)=m⋅g  ⟹  T=0.350⋅9.80sin⁡(28.0∘)  ⟹  T=7.31 NT \cdot \sin(28.0^\circ) = m \cdot g \implies T = \frac{0.350 \cdot 9.80}{\sin(28.0^\circ)} \implies T = 7.31\text{ N}

    Correct

    FTcos⁡(28.0∘)=mg  ⟹  FT=(0.350 kg)(9.80 m/s2)cos⁡(28.0∘)≈3.88 NF_T \cos(28.0^\circ) = mg \implies F_T = \frac{(0.350\text{ kg})(9.80\text{ m/s}^2)}{\cos(28.0^\circ)} \approx 3.88\text{ N}

    Because the string angle θ=28.0∘\theta = 28.0^\circ is measured from the vertical downward axis, the vertical component is adjacent to θ\theta and requires cos⁡θ\cos\theta, not sin⁡θ\sin\theta.

  2. Step 2

    r=L⋅cos⁡(28.0∘)=0.7505 m  ⟹  Tperiod=2πrgcot⁡(28.0∘)=2π0.850⋅sin⁡(28.0∘)9.80=1.27 sr = L \cdot \cos(28.0^\circ) = 0.7505\text{ m} \implies T_{\text{period}} = 2\pi \sqrt{\frac{r}{g \cot(28.0^\circ)}} = 2\pi \sqrt{\frac{0.850 \cdot \sin(28.0^\circ)}{9.80}} = 1.27\text{ s}

    Correct

    r=Lsin⁡(28.0∘)  ⟹  T=2πLcos⁡(28.0∘)g=2π(0.850 m)cos⁡(28.0∘)9.80 m/s2≈1.74 sr = L \sin(28.0^\circ) \implies T = 2\pi \sqrt{\frac{L \cos(28.0^\circ)}{g}} = 2\pi \sqrt{\frac{(0.850\text{ m})\cos(28.0^\circ)}{9.80\text{ m/s}^2}} \approx 1.74\text{ s}

    The radius of the circular path is the opposite side of the triangle, so r=Lsin⁡θr = L\sin\theta. Consequently, the period depends on the vertical height h=Lcos⁡θh = L\cos\theta, yielding T≈1.74 sT \approx 1.74\text{ s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the vertical forces must balance because the bob orbits in a horizontal plane.

You related the horizontal restoring force to the circular centripetal acceleration and correctly formatted the period relationship.

You carried out your arithmetic and rounding steps accurately based on your written formulas.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Swap

You associated the vertical component with sin⁡θ\sin\theta and the horizontal radius with cos⁡θ\cos\theta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You defaulted to standard Cartesian vector resolution where angles are measured from the horizontal, rather than sketching the right triangle with respect to the vertical axis where the vertical side is adjacent (cos⁡θ\cos\theta) and the horizontal radius is opposite (sin⁡θ\sin\theta).

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Axis Check
  • Components depend on where the angle is anchored: adjacent=hypotenuse×cos⁡θ\text{adjacent} = \text{hypotenuse} \times \cos\theta, while opposite=hypotenuse×sin⁡θ\text{opposite} = \text{hypotenuse} \times \sin\theta.

  • Always sketch the right triangle and mark the angle explicitly before assigning trigonometric ratios.

Conical Pendulum Period Form
  • For a conical pendulum of string length LL and vertical angle θ\theta, the period is T=2πhg=2πLcos⁡θgT = 2\pi \sqrt{\frac{h}{g}} = 2\pi \sqrt{\frac{L\cos\theta}{g}}.

  • Verify that your derived period formula uses the vertical height h=Lcos⁡θh = L\cos\theta rather than the horizontal radius.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the vertical equilibrium using the adjacent component: FTcos⁡(28.0∘)=mgF_T \cos(28.0^\circ) = mg.

  2. Compute the tension: FT=0.350×9.80cos⁡(28.0∘)=3.430.88295≈3.88 NF_T = \frac{0.350 \times 9.80}{\cos(28.0^\circ)} = \frac{3.43}{0.88295} \approx 3.88\text{ N}.

  3. Determine the effective vertical height: h=Lcos⁡(28.0∘)=0.850×0.88295≈0.7505 mh = L \cos(28.0^\circ) = 0.850 \times 0.88295 \approx 0.7505\text{ m}.

  4. Calculate the orbital period: T=2πhg=2π0.75059.80≈1.74 sT = 2\pi \sqrt{\frac{h}{g}} = 2\pi \sqrt{\frac{0.7505}{9.80}} \approx 1.74\text{ s}.

Final answer

(a) Tension=3.88 N\text{Tension} = 3.88\text{ N}; (b) T=1.74 sT = 1.74\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a free-body diagram highlighting the vertical reference axis to verify which side is adjacent to θ\theta.

  • Practice resolving tension forces when angles are given with respect to the vertical versus the horizontal.

  • Check your limiting cases: as θ→0∘\theta \to 0^\circ, the string becomes nearly vertical, so tension should approach mgmg (FT≈mg/cos⁡(0∘)F_T \approx mg/\cos(0^\circ)).

OverviewACEpath Teacher's Diagnosis

02 The student forgets that the tension must support the bob against gravity with an angle relative to the vertical, mistakenly setting tension equal to the gravitational force m·g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=m⋅g  ⟹  T=0.350⋅9.80=3.43 NT = m \cdot g \implies T = 0.350 \cdot 9.80 = 3.43\text{ N}

    Correct

    Tcos⁡(28.0∘)=mg  ⟹  T=(0.350 kg)(9.80 m/s2)cos⁡(28.0∘)≈3.88 NT \cos(28.0^\circ) = mg \implies T = \frac{(0.350\text{ kg})(9.80\text{ m/s}^2)}{\cos(28.0^\circ)} \approx 3.88\text{ N}

    Because the string is inclined at θ=28.0∘\theta = 28.0^\circ from the vertical, only the vertical component of the tension balances gravity (Tcos⁡θ=mgT\cos\theta = mg). Setting T=mgT = mg treats the string as purely vertical, underestimating the actual tension.

  2. Step 2

    r=L⋅sin⁡(28.0∘)=0.850⋅0.4695=0.399 mr = L \cdot \sin(28.0^\circ) = 0.850 \cdot 0.4695 = 0.399\text{ m}

  3. Step 3

    Fc=T⋅sin⁡(28.0∘)=3.43⋅0.4695=1.61 NF_c = T \cdot \sin(28.0^\circ) = 3.43 \cdot 0.4695 = 1.61\text{ N}

    Correct

    Fc=Tsin⁡(28.0∘)=(3.88 N)sin⁡(28.0∘)≈1.82 NF_c = T \sin(28.0^\circ) = (3.88\text{ N})\sin(28.0^\circ) \approx 1.82\text{ N}

    Your relationship Fc=Tsin⁡θF_c = T\sin\theta is conceptually correct, but substituting the incorrect tension T=3.43 NT = 3.43\text{ N} yielded an inaccurate centripetal force.

  4. Step 4

    m⋅(4⋅π2⋅rTperiod2)=1.61  ⟹  Tperiod2=4⋅π2⋅0.350⋅0.3991.61=3.42m \cdot \left(\frac{4 \cdot \pi^2 \cdot r}{T_{\text{period}}^2}\right) = 1.61 \implies T_{\text{period}}^2 = \frac{4 \cdot \pi^2 \cdot 0.350 \cdot 0.399}{1.61} = 3.42

    Correct

    T2=4π2mrFc=4π2(0.350 kg)(0.399 m)1.82 N≈3.03 s2T^2 = \frac{4\pi^2 m r}{F_c} = \frac{4\pi^2 (0.350\text{ kg})(0.399\text{ m})}{1.82\text{ N}} \approx 3.03\text{ s}^2

    Your algebraic rearrangement for T2T^2 using Fc=mω2r=m(4π2rT2)F_c = m\omega^2 r = m\left(\frac{4\pi^2 r}{T^2}\right) is completely sound, but it inherits the numerical error from FcF_c.

  5. Step 5

    Tperiod=1.85 sT_{\text{period}} = 1.85\text{ s}

    Correct

    T=3.03 s2≈1.74 sT = \sqrt{3.03\text{ s}^2} \approx 1.74\text{ s}

    You correctly took the square root of your calculated T2T^2, but the value was affected by the earlier tension mistake.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the pendulum geometry to find the circular orbit radius r=Lsin⁡θr = L\sin\theta.

You correctly identified that the horizontal component of tension provides the centripetal force (Fc=Tsin⁡θF_c = T\sin\theta).

You correctly related centripetal acceleration to the orbital period via ac=4π2rT2a_c = \frac{4\pi^2 r}{T^2} and solved algebraically for TT.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equilibrium with angled tension

You set string tension directly equal to mgmg without dividing by cos⁡θ\cos\theta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated tension as balancing gravity along the vertical line of action rather than resolving the vector tension into orthogonal components (Ty=Tcos⁡θT_y = T\cos\theta and Tx=Tsin⁡θT_x = T\sin\theta).

REASONING PATH
Your ACEpath teacher’s suggested approach
Draw a free-body diagram and resolve components
  • For a mass moving in a purely horizontal circle, vertical acceleration is zero: ∑Fy=0  ⟹  Tcos⁡θ−mg=0\sum F_y = 0 \implies T\cos\theta - mg = 0.

  • Always set T=mgcos⁡θT = \frac{mg}{\cos\theta} whenever a supporting string is tilted at an angle θ\theta from the vertical.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Resolve forces vertically: Tcos⁡(28.0∘)=mg  ⟹  T=(0.350 kg)(9.80 m/s2)cos⁡(28.0∘)≈3.88 NT\cos(28.0^\circ) = mg \implies T = \frac{(0.350\text{ kg})(9.80\text{ m/s}^2)}{\cos(28.0^\circ)} \approx 3.88\text{ N}.

  2. Calculate the horizontal centripetal force: Fc=Tsin⁡(28.0∘)=(3.884 N)sin⁡(28.0∘)≈1.823 NF_c = T\sin(28.0^\circ) = (3.884\text{ N})\sin(28.0^\circ) \approx 1.823\text{ N}.

  3. Solve for the orbital period: Tperiod=2πLcos⁡θg=2π(0.850 m)cos⁡(28.0∘)9.80 m/s2≈1.74 sT_{\text{period}} = 2\pi \sqrt{\frac{L\cos\theta}{g}} = 2\pi \sqrt{\frac{(0.850\text{ m})\cos(28.0^\circ)}{9.80\text{ m/s}^2}} \approx 1.74\text{ s}.

Final answer

(a) T=3.88 NT = 3.88\text{ N}; (b) Tperiod=1.74 sT_{\text{period}} = 1.74\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing free-body diagrams with separate vertical and horizontal force balance equations.

  • Remember the convenient conical pendulum period formula T=2πhgT = 2\pi\sqrt{\frac{h}{g}}, where h=Lcos⁡θh = L\cos\theta is the vertical height below the pivot.

OverviewACEpath Teacher's Diagnosis

03 The student uses the total string length L instead of the horizontal radius r = L·sin(θ) when computing the centripetal acceleration and orbital period.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T⋅cos⁡(28.0∘)=m⋅g  ⟹  T=(0.350⋅9.80)cos⁡(28.0∘)=3.88 NT \cdot \cos(28.0^\circ) = m \cdot g \implies T = \frac{(0.350 \cdot 9.80)}{\cos(28.0^\circ)} = 3.88\text{ N}

  2. Step 2

    T⋅sin⁡(28.0∘)=m⋅(4⋅π2⋅LTperiod2)T \cdot \sin(28.0^\circ) = m \cdot \left(\frac{4 \cdot \pi^2 \cdot L}{T_{\text{period}}^2}\right)

    Correct

    FTsin⁡θ=m(4π2rT2)=m(4π2Lsin⁡θT2)F_T \sin\theta = m \left(\frac{4\pi^2 r}{T^2}\right) = m \left(\frac{4\pi^2 L\sin\theta}{T^2}\right)

    Centripetal acceleration is ac=ω2r=4π2rT2a_c = \omega^2 r = \frac{4\pi^2 r}{T^2}, where rr is the radius of the circular path. For a conical pendulum, the bob orbits in a horizontal plane of radius r=Lsin⁡θr = L\sin\theta, not the string length LL.

  3. Step 3

    Tperiod2=4⋅π2⋅m⋅LT⋅sin⁡(28.0∘)  ⟹  Tperiod2=4⋅π2⋅0.350⋅0.8503.88⋅sin⁡(28.0∘)=11.741.821=6.45  ⟹  Tperiod=2.54 sT_{\text{period}}^2 = \frac{4 \cdot \pi^2 \cdot m \cdot L}{T \cdot \sin(28.0^\circ)} \implies T_{\text{period}}^2 = \frac{4 \cdot \pi^2 \cdot 0.350 \cdot 0.850}{3.88 \cdot \sin(28.0^\circ)} = \frac{11.74}{1.821} = 6.45 \implies T_{\text{period}} = 2.54\text{ s}

    Correct

    T=2πLcos⁡θg=2π(0.850 m)cos⁡(28.0∘)9.80 m/s2≈1.74 sT = 2\pi \sqrt{\frac{L\cos\theta}{g}} = 2\pi \sqrt{\frac{(0.850\text{ m})\cos(28.0^\circ)}{9.80\text{ m/s}^2}} \approx 1.74\text{ s}

    Your algebraic rearrangement and arithmetic were carried out cleanly, but the calculated period inherits the error from omitting sin⁡θ\sin\theta in the orbital radius.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly balanced the vertical force components to find the string tension.

You correctly related centripetal force to the horizontal component of tension.

You executed the multi-step algebraic solving and square root calculation accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conical Pendulum Radius vs String Length

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the string length LL in place of the horizontal trajectory radius r=Lsin⁡θr = L\sin\theta in the centripetal acceleration formula ac=4π2rT2a_c = \frac{4\pi^2 r}{T^2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the circle of motion
  • In circular motion, centripetal acceleration ac=ω2r=v2ra_c = \omega^2 r = \frac{v^2}{r} always depends on the radius rr of the actual circular orbit, measured perpendicular to the rotation axis.

  • Draw the horizontal circular plane and express the radius geometrically as r=Lsin⁡θr = L\sin\theta before substituting into Fnet=macF_{\text{net}} = m a_c.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the orbital radius in terms of string length: r=Lsin⁡θ=(0.850 m)sin⁡(28.0∘)≈0.399 mr = L \sin\theta = (0.850\text{ m})\sin(28.0^\circ) \approx 0.399\text{ m}.

  2. Set the horizontal component of tension equal to centripetal force: FTsin⁡θ=m(4π2(Lsin⁡θ)T2)F_T \sin\theta = m \left(\frac{4\pi^2 (L\sin\theta)}{T^2}\right).

  3. Cancel sin⁡θ\sin\theta from both sides: FT=4π2mLT2F_T = \frac{4\pi^2 m L}{T^2}, or substitute FT=mgcos⁡θF_T = \frac{mg}{\cos\theta} to get T=2πLcos⁡θgT = 2\pi\sqrt{\frac{L\cos\theta}{g}}.

  4. Calculate T=2π(0.850 m)cos⁡(28.0∘)9.80 m/s2≈1.74 sT = 2\pi \sqrt{\frac{(0.850\text{ m})\cos(28.0^\circ)}{9.80\text{ m/s}^2}} \approx 1.74\text{ s}.

Final answer

(a) Tension=3.88 N\text{Tension} = 3.88\text{ N}; (b) T=1.74 sT = 1.74\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a side view of any conical pendulum problem and explicitly label the horizontal radius r=Lsin⁡θr = L\sin\theta and vertical height h=Lcos⁡θh = L\cos\theta.

  • Remember that the period of a conical pendulum simplifies to T=2πh/gT = 2\pi\sqrt{h/g}, showing that only the vertical depth hh governs the timing.

Lock it in

Similar question

01

A 0.200 kg0.200\text{ kg} bob on a 0.500 m0.500\text{ m} string revolves as a conical pendulum at an angle of 30.0∘30.0^\circ to the vertical. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, find the tension in the string.

Answer

FT=2.26 NF_T = 2.26\text{ N}. Key steps: FTcos⁡(30.0∘)=mg  ⟹  FT=(0.200)(9.80)cos⁡(30.0∘)=1.960.8660≈2.26 NF_T \cos(30.0^\circ) = mg \implies F_T = \frac{(0.200)(9.80)}{\cos(30.0^\circ)} = \frac{1.96}{0.8660} \approx 2.26\text{ N}.

02

For the same pendulum (m=0.200 kgm = 0.200\text{ kg}, L=0.500 mL = 0.500\text{ m}, θ=30.0∘\theta = 30.0^\circ, g=9.80 m/s2g = 9.80\text{ m/s}^2), calculate the rotational period TT.

Answer

T=1.32 sT = 1.32\text{ s}. Key steps: h=Lcos⁡(30.0∘)=(0.500)(0.8660)=0.433 mh = L\cos(30.0^\circ) = (0.500)(0.8660) = 0.433\text{ m}; T=2πhg=2π0.4339.80≈1.32 sT = 2\pi\sqrt{\frac{h}{g}} = 2\pi\sqrt{\frac{0.433}{9.80}} \approx 1.32\text{ s}.

03

An amusement park ride swings riders of mass mm in a horizontal circle on chains of length L=6.00 mL = 6.00\text{ m} at an angle of 45.0∘45.0^\circ relative to the vertical. Find the speed vv of the riders using g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

v=6.45 m/sv = 6.45\text{ m/s}. Key steps: r=Lsin⁡(45.0∘)=6.00×0.7071=4.243 mr = L\sin(45.0^\circ) = 6.00 \times 0.7071 = 4.243\text{ m}; vertical balance gives FTcos⁡(45∘)=mgF_T\cos(45^\circ) = mg and horizontal force gives FTsin⁡(45∘)=mv2rF_T\sin(45^\circ) = \frac{mv^2}{r}, so tan⁡(45.0∘)=v2rg  ⟹  v=rgtan⁡(45.0∘)=(4.243)(9.80)(1)≈6.45 m/s\tan(45.0^\circ) = \frac{v^2}{rg} \implies v = \sqrt{rg\tan(45.0^\circ)} = \sqrt{(4.243)(9.80)(1)} \approx 6.45\text{ m/s}.

Loading workspace…