Resources

A test projectile of mass m=0.250 kgm = 0.250\text{ kg} is launched vertically upward by releasing an ideal, compressed spring located at ground level. The spring has a force constant k=1.60×103 N/mk = 1.60 \times 10^3\text{ N/m}. After the projectile separates smoothly from the uncompressed spring at ground level, it continues upward through vacuum (g=9.80 m/s2g = 9.80\text{ m/s}^2) and reaches a maximum apex height of hmax⁡=14.5 mh_{\max} = 14.5\text{ m} above the initial uncompressed position of the spring's top end. Neglecting friction and the mass of the spring, determine the initial downward compression distance x0x_0 of the spring required to achieve this height.

Answer and steps

Final answer

x0=0.211 mx_0 = 0.211\text{ m}

Steps

01

Kinetic Energy at Separation

To find the required initial compression distance x0x_0, we analyze the transfer of mechanical energy across the launch and flight of the projectile.

Let the origin (y=0y = 0) be the uncompressed position of the spring's top end at ground level.

After launch, the projectile separates from the spring at this uncompressed position with an upward speed vv. It then moves freely under gravity until it momentarily comes to rest (vapex=0v_{\text{apex}} = 0) at its maximum height hmax⁡=14.5 mh_{\max} = 14.5\text{ m}.

By conservation of mechanical energy during free flight: Ek=Ug,apexE_k = U_{g,\text{apex}} 12mv2=mghmax⁡\frac{1}{2}mv^2 = mgh_{\max}

Substituting the given values: Ek=(0.250 kg)(9.80 m/s2)(14.5 m)=35.525 JE_k = (0.250\text{ kg})(9.80\text{ m/s}^2)(14.5\text{ m}) = 35.525\text{ J}


02

Relation to Elastic Potential Energy

At maximum compression, the spring stores elastic potential energy: Us=12kx02U_s = \frac{1}{2}kx_0^2

As the compressed spring expands to its uncompressed length at ground level, this stored elastic potential energy is transferred to the projectile as kinetic energy EkE_k: Us=EkU_s = E_k 12kx02=mghmax⁡\frac{1}{2}kx_0^2 = mgh_{\max}

(Note: Because the compression distance x0≈0.2 mx_0 \approx 0.2\text{ m} is very small compared to the apex height hmax⁡=14.5 mh_{\max} = 14.5\text{ m}, the small change in gravitational potential energy during the expansion phase, mgx0≈0.5 Jmgx_0 \approx 0.5\text{ J}, contributes only about 1.4%1.4\% of the total energy and is negligible.)


03

Solve for the Compression Distance x0x_0

Rearranging for x0x_0: x0=2mghmax⁡kx_0 = \sqrt{\frac{2mgh_{\max}}{k}}

Substitute the numerical values: x0=2(35.525 J)1.60×103 N/m=71.051600 m=0.04440625 m≈0.211 mx_0 = \sqrt{\frac{2(35.525\text{ J})}{1.60 \times 10^3\text{ N/m}}} = \sqrt{\frac{71.05}{1600}}\text{ m} = \sqrt{0.04440625}\text{ m} \approx 0.211\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the initial gravitational potential energy change during spring decompression, equating the spring's elastic potential energy solely to the gravitational potential energy measured from the uncompressed release point.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Correct
  1. Step 1

    (1/2)∗k∗x02=m∗g∗hmax⁡  ⟹  x02=2∗m∗g∗hmax⁡k(1/2)*k*x_0^2 = m*g*h_{\max} \implies x_0^2 = \frac{2*m*g*h_{\max}}{k}

  2. Step 2

    x02=2∗(0.250)∗(9.80)∗(14.5)1600  ⟹  x02=71.051600≈0.04441x_0^2 = \frac{2*(0.250)*(9.80)*(14.5)}{1600} \implies x_0^2 = \frac{71.05}{1600} \approx 0.04441

  3. Step 3

    x0=0.04441≈0.211 mx_0 = \sqrt{0.04441} \approx 0.211\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the elastic potential energy stored in the spring transforms into gravitational potential energy at the projectile's apex.

You manipulated the energy equation algebraically before substituting numerical values.

You carried out the arithmetic with high precision and properly rounded your final answer.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
none
REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluating the Gravitational Potential Energy Reference Point
  • In a vertical launch, the projectile travels from y=−x0y = -x_0 to y=hmax⁡y = h_{\max}, making the exact mechanical energy equation 12kx02=mg(hmax⁡+x0)\frac{1}{2}kx_0^2 = mg(h_{\max} + x_0).

  • Always verify whether the compression distance x0x_0 is negligible compared to the apex height hmax⁡h_{\max}. Here, x0≈0.211 m≪14.5 mx_0 \approx 0.211\text{ m} \ll 14.5\text{ m} (mgx0mgx_0 is only ≈1.4%\approx 1.4\% of the total energy), so equating 12kx02≈mghmax⁡\frac{1}{2}kx_0^2 \approx mgh_{\max} is a completely valid and standard approximation.

CORRECTED PATH
ACEpath Teacher's Demonstration
Final answer

x0=0.211 mx_0 = 0.211\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice solving vertical spring launch problems where the apex height is comparable to the compression distance, requiring you to solve a full quadratic equation for x0x_0.

  • Explore how air resistance or spring mass would alter the energy conservation balance in real-world projectile launches.

OverviewACEpath Teacher's Diagnosis

02 The student forgets the factor of 1/2 in the formula for elastic potential energy, taking E_elastic = k*x0² instead of (1/2)*k*x0².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    kx02−mgx0−mghmax⁡=0  ⟹  1600x02−2.45x0−35.525=0k x_0^2 - m g x_0 - m g h_{\max} = 0 \implies 1600 x_0^2 - 2.45 x_0 - 35.525 = 0

    Correct

    12kx02−mgx0−mghmax⁡=0  ⟹  800x02−2.45x0−35.525=0\frac{1}{2} k x_0^2 - m g x_0 - m g h_{\max} = 0 \implies 800 x_0^2 - 2.45 x_0 - 35.525 = 0 (or 12kx02≈mghmax⁡\frac{1}{2} k x_0^2 \approx m g h_{\max})

    You correctly recognized that total energy is conserved across the launch, but you wrote the elastic potential energy as kx02k x_0^2 rather than 12kx02\frac{1}{2} k x_0^2. This doubled the spring energy term relative to the gravitational energy terms.

  2. Step 2

    x0=2.45+2.452−4(1600)(−35.525)3200  ⟹  x0=2.45+6.0025+2273603200  ⟹  x0=2.45+476.823200x_0 = \frac{2.45 + \sqrt{2.45^2 - 4(1600)(-35.525)}}{3200} \implies x_0 = \frac{2.45 + \sqrt{6.0025 + 227360}}{3200} \implies x_0 = \frac{2.45 + 476.82}{3200}

    Correct

    x0=2.45+2.452−4(800)(−35.525)1600≈0.212 mx_0 = \frac{2.45 + \sqrt{2.45^2 - 4(800)(-35.525)}}{1600} \approx 0.212\text{ m} (or x0=2mghmax⁡k≈0.211 mx_0 = \sqrt{\frac{2 m g h_{\max}}{k}} \approx 0.211\text{ m})

    You carried out the quadratic formula algebraically correctly using your coefficients, but the calculation was affected by using a=1600a = 1600 instead of a=800a = 800.

  3. Step 3

    x0≈0.150 mx_0 \approx 0.150\text{ m}

    Correct

    x0≈0.211 mx_0 \approx 0.211\text{ m}

    Your final numerical answer follows directly from the quadratic equation evaluated above, but it differs from the true value because the spring energy term was missing the factor of 12\frac{1}{2}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that mechanical energy is conserved throughout the projectile's motion.

You took great care to set up a comprehensive reference frame that included the initial compression displacement in the gravitational potential energy.

You applied the quadratic formula accurately to solve your algebraic equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Factor of 1/2 in Elastic Potential Energy

You wrote Us=kx2U_s = k x^2 instead of Us=12kx2U_s = \frac{1}{2} k x^2, leaving out the coefficient 12\frac{1}{2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing Hooke's law for force (F=kxF = kx) with the integral expression for elastic potential energy (Us=∫kx dx=12kx2U_s = \int kx\,dx = \frac{1}{2}kx^2), or omitting the factor of 12\frac{1}{2} when setting up the energy balance equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall the Integral Definition of Work and Energy
  • The work done to compress an ideal spring by distance xx is W=∫0xks ds=12kx2W = \int_0^x k s\,ds = \frac{1}{2} k x^2.

  • Always double-check that every quadratic displacement energy term has a preceding factor of 12\frac{1}{2} before substituting numerical values.

Evaluate Magnitude of Secondary Corrections
  • When hmax⁡≫x0h_{\max} \gg x_0, the expansion work against gravity (mgx0mgx_0) is negligible compared to mghmax⁡mgh_{\max}.

  • Check if an approximate single-step balance 12kx02≈mghmax⁡\frac{1}{2} k x_0^2 \approx m g h_{\max} gives a clean initial estimate to sanity-check your quadratic root.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the mechanical energy conservation equation with the correct elastic potential energy factor: 12kx02−mgx0−mghmax⁡=0\frac{1}{2} k x_0^2 - m g x_0 - m g h_{\max} = 0.

  2. Substitute the given parameters: 12(1600)x02−(0.250)(9.80)x0−(0.250)(9.80)(14.5)=0  ⟹  800x02−2.45x0−35.525=0\frac{1}{2}(1600)x_0^2 - (0.250)(9.80)x_0 - (0.250)(9.80)(14.5) = 0 \implies 800 x_0^2 - 2.45 x_0 - 35.525 = 0.

  3. Solve for the positive physical root using the quadratic formula: x0=2.45+(−2.45)2−4(800)(−35.525)2(800)=2.45+6.0025+1136801600≈2.45+337.171600≈0.212 mx_0 = \frac{2.45 + \sqrt{(-2.45)^2 - 4(800)(-35.525)}}{2(800)} = \frac{2.45 + \sqrt{6.0025 + 113680}}{1600} \approx \frac{2.45 + 337.17}{1600} \approx 0.212\text{ m} (or x0≈2(35.525)1600≈0.211 mx_0 \approx \sqrt{\frac{2(35.525)}{1600}} \approx 0.211\text{ m} if mgx0mgx_0 is neglected).

Final answer

x0=0.211 mx_0 = 0.211\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between spring force F=kxF = kx and stored elastic potential energy U=12kx2U = \frac{1}{2}kx^2.

  • Practice setting up energy conservation balances for vertical spring launchers by comparing state 1 (compressed, at rest) and state 2 (apex, at rest).

  • Verify your algebraic equations dimensionally and check whether your solution simplifies nicely under standard approximations.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts instead of adds the compression distance in the total vertical displacement, setting the height gained from the launch point as h_max - x0.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    12kx02=mg(hmax⁡−x0)\frac{1}{2}kx_0^2 = mg(h_{\max} - x_0)

    Correct

    12kx02=mghmax⁡\frac{1}{2}kx_0^2 = mgh_{\max} (or 12kx02=mg(hmax⁡+x0)\frac{1}{2}kx_0^2 = mg(h_{\max} + x_0))

    You subtracted the compression distance x0x_0 instead of adding it. Since the spring is compressed downward from ground level (y=−x0y = -x_0) and reaches an apex at y=hmax⁡y = h_{\max}, the total vertical displacement is hmax⁡−(−x0)=hmax⁡+x0h_{\max} - (-x_0) = h_{\max} + x_0.

  2. Step 2

    800x02+2.45x0−35.525=0  ⟹  x0=−2.45+2.452−4(800)(−35.525)1600  ⟹  x0=−2.45+337.171600800x_0^2 + 2.45x_0 - 35.525 = 0 \implies x_0 = \frac{-2.45 + \sqrt{2.45^2 - 4(800)(-35.525)}}{1600} \implies x_0 = \frac{-2.45 + 337.17}{1600}

    Correct

    x0=2mghmax⁡kx_0 = \sqrt{\frac{2mgh_{\max}}{k}} (or 800x02−2.45x0−35.525=0800x_0^2 - 2.45x_0 - 35.525 = 0)

    Your algebraic rearrangement and application of the quadratic formula were executed correctly, but they propagate the sign error from Step 1.

  3. Step 3

    x0≈0.209 mx_0 \approx 0.209\text{ m}

    Correct

    x0≈0.211 mx_0 \approx 0.211\text{ m}

    This value differs from the correct answer because of the subtracted displacement term in the initial equation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that total mechanical energy is conserved between the fully compressed state and the apex.

You accurately calculated the numerical coefficients for mass, gravity, and the spring constant.

You carried out the quadratic formula computation with sound arithmetic.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Vertical Displacement Datum

You subtracted the initial compression distance x0x_0 from hmax⁡h_{\max} rather than adding it to the total height gained.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misinterpreting the coordinate reference frame: compressing a spring downward places the initial release point below ground level, so moving from the compressed position to the apex requires rising through both x0x_0 and hmax⁡h_{\max}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish a Clear Vertical Axis
  • Define a single reference point (such as y=0y = 0 at the uncompressed spring position) and write displacements as yfinal−yinitialy_{\text{final}} - y_{\text{initial}}.

  • Check that rising from a downward compression yi=−x0y_i = -x_0 to apex yf=hmax⁡y_f = h_{\max} yields Δy=hmax⁡−(−x0)=hmax⁡+x0\Delta y = h_{\max} - (-x_0) = h_{\max} + x_0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up conservation of mechanical energy using the uncompressed position as reference (y=0y = 0): Ei=12kx02E_i = \frac{1}{2}kx_0^2, and at the apex Ef=mghmax⁡E_f = mgh_{\max}.

  2. Equate elastic potential energy to gravitational potential energy at the apex: 12kx02=mghmax⁡\frac{1}{2}kx_0^2 = mgh_{\max}.

  3. Solve for x0x_0: x0=2mghmax⁡k=2(0.250 kg)(9.80 m/s2)(14.5 m)1.60×103 N/mx_0 = \sqrt{\frac{2mgh_{\max}}{k}} = \sqrt{\frac{2(0.250\text{ kg})(9.80\text{ m/s}^2)(14.5\text{ m})}{1.60 \times 10^3\text{ N/m}}}.

  4. Evaluate the expression: x0=71.051600≈0.211 mx_0 = \sqrt{\frac{71.05}{1600}} \approx 0.211\text{ m}.

Final answer

x0=0.211 mx_0 = 0.211\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a vertical coordinate axis and label initial, equilibrium, and apex positions before writing energy expressions.

  • Practice setting up gravitational potential energy with reference datums located below ground level.

Lock it in

Similar question

01

A 0.100 kg0.100\text{ kg} toy dart is placed on a vertical spring compressed by 0.050 m0.050\text{ m}. The spring constant is k=400 N/mk = 400\text{ N/m}. Assuming g=9.80 m/s2g = 9.80\text{ m/s}^2 and that the compression distance is small enough that mgx0mgx_0 can be neglected during launch, find the maximum height hmax⁡h_{\max} reached above the uncompressed release point.

Answer

hmax⁡=0.51 mh_{\max} = 0.51\text{ m}. By energy conservation, 12kx02=mghmax⁡  ⟹  hmax⁡=kx022mg=(400)(0.050)22(0.100)(9.80)=0.501.96≈0.510 m\frac{1}{2}kx_0^2 = mgh_{\max} \implies h_{\max} = \frac{kx_0^2}{2mg} = \frac{(400)(0.050)^2}{2(0.100)(9.80)} = \frac{0.50}{1.96} \approx 0.510\text{ m}.

02

A 0.500 kg0.500\text{ kg} ball is launched vertically upward by a spring with k=100 N/mk = 100\text{ N/m}. The spring is initially compressed downward by x0=0.400 mx_0 = 0.400\text{ m}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2 and including the gravitational potential energy change during decompression, calculate the maximum height hh reached above the uncompressed equilibrium position.

Answer

h=1.23 mh = 1.23\text{ m}. The total energy equation from lowest point to apex is 12kx02=mg(h+x0)\frac{1}{2}kx_0^2 = mg(h + x_0). Substituting values gives 12(100)(0.400)2=(0.500)(9.80)(h+0.400)  ⟹  8.00=4.90(h+0.400)  ⟹  h+0.400=1.633  ⟹  h≈1.23 m\frac{1}{2}(100)(0.400)^2 = (0.500)(9.80)(h + 0.400) \implies 8.00 = 4.90(h + 0.400) \implies h + 0.400 = 1.633 \implies h \approx 1.23\text{ m}.

03

A mass m=0.200 kgm = 0.200\text{ kg} is resting on a vertical spring. A student compresses the spring downward by an unknown distance x0x_0 and releases it from rest. The mass reaches an apex height of h=0.800 mh = 0.800\text{ m} above the uncompressed position. If the spring constant is k=50.0 N/mk = 50.0\text{ N/m} and g=9.80 m/s2g = 9.80\text{ m/s}^2, determine x0x_0 exactly by solving the quadratic energy conservation equation 12kx02−mgx0−mgh=0\frac{1}{2}kx_0^2 - mgx_0 - mgh = 0.

Answer

x0=0.291 mx_0 = 0.291\text{ m}. Substitute the known values: 25.0x02−1.96x0−1.568=025.0x_0^2 - 1.96x_0 - 1.568 = 0. Applying the quadratic formula: x0=1.96+(−1.96)2−4(25.0)(−1.568)2(25.0)=1.96+3.8416+156.850.0=1.96+12.67450.0≈0.291 mx_0 = \frac{1.96 + \sqrt{(-1.96)^2 - 4(25.0)(-1.568)}}{2(25.0)} = \frac{1.96 + \sqrt{3.8416 + 156.8}}{50.0} = \frac{1.96 + 12.674}{50.0} \approx 0.291\text{ m}.

Loading workspace…