Resources

A maglev test car moves along a straight rail. Its recorded position-time graph shows two segments: from t=0.0 st = 0.0\text{ s} to t=5.0 st = 5.0\text{ s}, it moves with a constant velocity v1=8.0 m/sv_1 = 8.0\text{ m/s} from an unknown initial position x0x_0; from t=5.0 st = 5.0\text{ s} to t=12.0 st = 12.0\text{ s}, it reverses direction and travels with a constant velocity v2=−6.0 m/sv_2 = -6.0\text{ m/s}. Given that the final position of the car at t=12.0 st = 12.0\text{ s} is x(12.0)=15.0 mx(12.0) = 15.0\text{ m}, reconstruct the motion to determine: (a) the peak coordinate x(5.0)x(5.0) achieved by the car, and (b) the initial coordinate x0x_0 at t=0.0 st = 0.0\text{ s}.

Answer and steps

Final answer

(a) x(5.0)=57.0 mx(5.0) = 57.0\text{ m}; (b) x0=17.0 mx_0 = 17.0\text{ m}

Steps

01

Determine the Peak Position x(5.0 s)x(5.0\text{ s})

Understanding the Motion

For an object moving along a straight line at constant velocity vv over a time interval Δt\Delta t, the change in position (displacement) is given by: Δx=v⋅Δt\Delta x = v \cdot \Delta t The motion consists of two distinct intervals of constant velocity:

  1. First segment: t∈[0.0 s,5.0 s]t \in [0.0\text{ s}, 5.0\text{ s}] with velocity v1=8.0 m/sv_1 = 8.0\text{ m/s}.
  2. Second segment: t∈[5.0 s,12.0 s]t \in [5.0\text{ s}, 12.0\text{ s}] with velocity v2=−6.0 m/sv_2 = -6.0\text{ m/s}.

We work backward from the known final state at t=12.0 st = 12.0\text{ s} to find the position at t=5.0 st = 5.0\text{ s}.

  • Duration of the second segment: Δt2=12.0 s−5.0 s=7.0 s\Delta t_2 = 12.0\text{ s} - 5.0\text{ s} = 7.0\text{ s}
  • Displacement during this interval: Δx2=v2⋅Δt2=(−6.0 m/s)⋅(7.0 s)=−42.0 m\Delta x_2 = v_2 \cdot \Delta t_2 = (-6.0\text{ m/s}) \cdot (7.0\text{ s}) = -42.0\text{ m}

The relation between the positions at t=5.0 st = 5.0\text{ s} and t=12.0 st = 12.0\text{ s} is: x(12.0)=x(5.0)+Δx2x(12.0) = x(5.0) + \Delta x_2

Substitute the known values: 15.0 m=x(5.0)−42.0 m15.0\text{ m} = x(5.0) - 42.0\text{ m} x(5.0)=15.0 m+42.0 m=57.0 mx(5.0) = 15.0\text{ m} + 42.0\text{ m} = 57.0\text{ m}


02

Determine the Initial Position x0x_0

Now, use the position at t=5.0 st = 5.0\text{ s} to determine the starting coordinate at t=0.0 st = 0.0\text{ s}.

  • Duration of the first segment: Δt1=5.0 s−0.0 s=5.0 s\Delta t_1 = 5.0\text{ s} - 0.0\text{ s} = 5.0\text{ s}
  • Displacement during this interval: Δx1=v1⋅Δt1=(8.0 m/s)⋅(5.0 s)=40.0 m\Delta x_1 = v_1 \cdot \Delta t_1 = (8.0\text{ m/s}) \cdot (5.0\text{ s}) = 40.0\text{ m}

The relation between the positions at t=0.0 st = 0.0\text{ s} and t=5.0 st = 5.0\text{ s} is: x(5.0)=x0+Δx1x(5.0) = x_0 + \Delta x_1

Substitute the calculated values: 57.0 m=x0+40.0 m57.0\text{ m} = x_0 + 40.0\text{ m} x0=57.0 m−40.0 m=17.0 mx_0 = 57.0\text{ m} - 40.0\text{ m} = 17.0\text{ m}

Common Pitfall: When working backward in time, remember that moving backward in time reverses the direction of displacement (xinitial=xfinal−vΔtx_{\text{initial}} = x_{\text{final}} - v \Delta t), or simply apply the standard relation xlater=xearlier+vΔtx_{\text{later}} = x_{\text{earlier}} + v \Delta t and solve for the unknown variable to avoid sign errors.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the total time t = 12.0 s instead of the elapsed time interval Δt = 7.0 s for the second segment, leading to an incorrect peak position and initial position.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δx2=(−6.0)(12.0)=−72.0 m  ⟹  x(5.0)=15.0−(−72.0)=87.0 m\Delta x_2 = (-6.0)(12.0) = -72.0\text{ m} \implies x(5.0) = 15.0 - (-72.0) = 87.0\text{ m}

    Correct

    Δt2=12.0 s−5.0 s=7.0 s  ⟹  Δx2=(−6.0 m/s)(7.0 s)=−42.0 m  ⟹  x(5.0)=15.0 m−(−42.0 m)=57.0 m\Delta t_2 = 12.0\text{ s} - 5.0\text{ s} = 7.0\text{ s} \implies \Delta x_2 = (-6.0\text{ m/s})(7.0\text{ s}) = -42.0\text{ m} \implies x(5.0) = 15.0\text{ m} - (-42.0\text{ m}) = 57.0\text{ m}

    You multiplied the velocity by the final clock reading t=12.0 st = 12.0\text{ s} rather than the time elapsed during the second segment, which is Δt2=12.0 s−5.0 s=7.0 s\Delta t_2 = 12.0\text{ s} - 5.0\text{ s} = 7.0\text{ s}.

  2. Step 2

    Δx1=(8.0)(5.0)=40.0 m  ⟹  x0=87.0−40.0=47.0 m\Delta x_1 = (8.0)(5.0) = 40.0\text{ m} \implies x_0 = 87.0 - 40.0 = 47.0\text{ m}

    Correct

    Δx1=(8.0 m/s)(5.0 s)=40.0 m  ⟹  x0=57.0 m−40.0 m=17.0 m\Delta x_1 = (8.0\text{ m/s})(5.0\text{ s}) = 40.0\text{ m} \implies x_0 = 57.0\text{ m} - 40.0\text{ m} = 17.0\text{ m}

    Your method of subtracting Δx1\Delta x_1 from the peak position to find x0x_0 was completely correct, but the result inherited the error from your peak coordinate in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the displacement formula Δx=vΔt\Delta x = v \Delta t to relate velocity, time, and position.

You correctly identified that solving backward in time means subtracting the forward displacement from the final position.

You correctly calculated the displacement for the first interval as Δx1=40.0 m\Delta x_1 = 40.0\text{ m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Interval vs. Clock Time Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating clock time tt at an instant with the elapsed interval duration Δt=tf−ti\Delta t = t_f - t_i when applying Δx=vΔt\Delta x = v \Delta t to a piecewise motion segment.

REASONING PATH
Your ACEpath teacher’s suggested approach
Compute Segment Duration
  • For a motion segment starting at t1t_1 and ending at t2t_2, duration is Δt=t2−t1\Delta t = t_2 - t_1.

  • Always write out Δt=tend−tstart\Delta t = t_{\text{end}} - t_{\text{start}} explicitly before multiplying by velocity.

Work Backward Along the Timeline
  • x(tstart)=x(tend)−vΔtx(t_{\text{start}}) = x(t_{\text{end}}) - v \Delta t.

  • Check your sign by confirming that moving in the negative velocity direction from x(5.0)x(5.0) leads to a smaller position at x(12.0)x(12.0).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the elapsed time for the second segment: Δt2=12.0 s−5.0 s=7.0 s\Delta t_2 = 12.0\text{ s} - 5.0\text{ s} = 7.0\text{ s}.

  2. Calculate the displacement in segment 2: Δx2=(−6.0 m/s)(7.0 s)=−42.0 m\Delta x_2 = (-6.0\text{ m/s})(7.0\text{ s}) = -42.0\text{ m}.

  3. Determine the peak position: x(5.0)=x(12.0)−Δx2=15.0 m−(−42.0 m)=57.0 mx(5.0) = x(12.0) - \Delta x_2 = 15.0\text{ m} - (-42.0\text{ m}) = 57.0\text{ m}.

  4. Determine the initial position: x0=x(5.0)−Δx1=57.0 m−(8.0 m/s)(5.0 s)=57.0 m−40.0 m=17.0 mx_0 = x(5.0) - \Delta x_1 = 57.0\text{ m} - (8.0\text{ m/s})(5.0\text{ s}) = 57.0\text{ m} - 40.0\text{ m} = 17.0\text{ m}.

Final answer

(a) x(5.0)=57.0 mx(5.0) = 57.0\text{ m}; (b) $x_0 = 17.0 m\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice explicitly writing Δt=tf−ti\Delta t = t_f - t_i for every piecewise motion segment before doing any multiplication.

  • Double-check your values against a quick sketch of the position-time graph to see if the peak height makes physical sense.

OverviewACEpath Teacher's Diagnosis

02 The student adds rather than subtracts the second segment displacement when working backward from the final position, resulting in an erroneous negative peak coordinate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δt2=12.0−5.0=7.0 s  ⟹  Δx2=(−6.0)(7.0)=−42.0 m\Delta t_2 = 12.0 - 5.0 = 7.0\text{ s} \implies \Delta x_2 = (-6.0)(7.0) = -42.0\text{ m}

  2. Step 2

    x(5.0)=15.0+(−42.0)=−27.0 mx(5.0) = 15.0 + (-42.0) = -27.0\text{ m}

    Correct

    x(12.0)=x(5.0)+Δx2  ⟹  x(5.0)=15.0 m−(−42.0 m)=57.0 mx(12.0) = x(5.0) + \Delta x_2 \implies x(5.0) = 15.0\text{ m} - (-42.0\text{ m}) = 57.0\text{ m}

    Because t=5.0 st = 5.0\text{ s} occurs before t=12.0 st = 12.0\text{ s}, the relationship is x(12.0)=x(5.0)+Δx2x(12.0) = x(5.0) + \Delta x_2. Solving for the earlier position requires subtracting the displacement: x(5.0)=x(12.0)−Δx2=15.0−(−42.0)=57.0 mx(5.0) = x(12.0) - \Delta x_2 = 15.0 - (-42.0) = 57.0\text{ m}.

  3. Step 3

    Δx1=(8.0)(5.0)=40.0 m\Delta x_1 = (8.0)(5.0) = 40.0\text{ m}

  4. Step 4

    x0=−27.0−40.0=−67.0 mx_0 = -27.0 - 40.0 = -67.0\text{ m}

    Correct

    x0=x(5.0)−Δx1=57.0 m−40.0 m=17.0 mx_0 = x(5.0) - \Delta x_1 = 57.0\text{ m} - 40.0\text{ m} = 17.0\text{ m}

    Your method of subtracting Δx1\Delta x_1 to work backward to t=0.0 st = 0.0\text{ s} was correct, but the result was affected by the erroneous value of x(5.0)x(5.0).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the displacement for both segments using Δx=vΔt\Delta x = v \Delta t.

You correctly applied backward subtraction in the first segment (x0=x(5.0)−Δx1x_0 = x(5.0) - \Delta x_1).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematic Direction / Working Backward in Time

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing forward accumulation with backward reconstruction: adding displacement to a later position instead of using the definition xfinal=xinitial+Δx  ⟹  xinitial=xfinal−Δxx_{\text{final}} = x_{\text{initial}} + \Delta x \implies x_{\text{initial}} = x_{\text{final}} - \Delta x.

REASONING PATH
Your ACEpath teacher’s suggested approach
Forward vs. Backward Kinematics
  • x(t2)=x(t1)+Δxx(t_2) = x(t_1) + \Delta x, so moving earlier in time requires x(t1)=x(t2)−Δxx(t_1) = x(t_2) - \Delta x.

  • Always write the forward equation xlater=xearlier+vΔtx_{\text{later}} = x_{\text{earlier}} + v \Delta t first, then isolate the unknown variable before plugging in numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the forward position relation: x(12.0)=x(5.0)+Δx2x(12.0) = x(5.0) + \Delta x_2.

  2. Substitute known values: 15.0=x(5.0)+(−42.0)15.0 = x(5.0) + (-42.0).

  3. Solve for x(5.0)x(5.0): x(5.0)=15.0−(−42.0)=57.0 mx(5.0) = 15.0 - (-42.0) = 57.0\text{ m}.

  4. Use x(5.0)x(5.0) to solve for x0x_0: x0=x(5.0)−Δx1=57.0−40.0=17.0 mx_0 = x(5.0) - \Delta x_1 = 57.0 - 40.0 = 17.0\text{ m}.

Final answer

(a) x(5.0)=57.0 mx(5.0) = 57.0\text{ m}; (b) x0=17.0 mx_0 = 17.0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write the standard time-ordered equation x(t2)=x(t1)+vΔtx(t_2) = x(t_1) + v\Delta t before substituting values whenever you work backward in time.

  • Check that positions make physical sense: traveling at a negative velocity means the car moved left, so its earlier position at t=5.0 st=5.0\text{ s} must be to the right of x(12.0)=15.0 mx(12.0)=15.0\text{ m}.

OverviewACEpath Teacher's Diagnosis

03 The student erroneously assumes the car starts at the origin x₀ = 0 m and calculates the peak position forward from segment 1, ignoring the final position constraint.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δt1=5.0−0.0=5.0 s\Delta t_1 = 5.0 - 0.0 = 5.0\text{ s}

  2. Step 2

    x(5.0)=0.0+(8.0)(5.0)=40.0 mx(5.0) = 0.0 + (8.0)(5.0) = 40.0\text{ m}

    Correct

    x(5.0)=x(12.0)−v2Δt2=15.0 m−(−6.0 m/s)(7.0 s)=57.0 mx(5.0) = x(12.0) - v_2 \Delta t_2 = 15.0\text{ m} - (-6.0\text{ m/s})(7.0\text{ s}) = 57.0\text{ m}

    You assumed the initial position x0x_0 was 0.0 m0.0\text{ m}. Because x0x_0 is explicitly stated as unknown, you must use the second segment where the position at t=12.0 st = 12.0\text{ s} (15.0 m15.0\text{ m}) is known to solve for x(5.0)x(5.0).

  3. Step 3

    x0=0.0 mx_0 = 0.0\text{ m}

    Correct

    x0=x(5.0)−v1Δt1=57.0 m−(8.0 m/s)(5.0 s)=17.0 mx_0 = x(5.0) - v_1 \Delta t_1 = 57.0\text{ m} - (8.0\text{ m/s})(5.0\text{ s}) = 17.0\text{ m}

    You set x0=0.0 mx_0 = 0.0\text{ m} by default instead of solving for it using x0=x(5.0)−v1Δt1x_0 = x(5.0) - v_1 \Delta t_1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the time duration for the first segment of motion.

You correctly applied the constant velocity displacement formula Δx=v⋅Δt\Delta x = v \cdot \Delta t.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unjustified Origin Assumption

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed an unknown starting position defaults to zero (x0=0x_0 = 0) rather than identifying that the problem provided a boundary condition at the end of the motion (x(12.0)=15.0 mx(12.0) = 15.0\text{ m}) requiring a backward reconstruction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Anchor to Known Boundary Conditions
  • When reconstructing multi-stage motion, always identify which time has a known position coordinate and start your chain of equations from that known point.

  • Check where position is given in the problem statement. Here, x(12.0)=15.0 mx(12.0) = 15.0\text{ m} is the anchor, so compute Δx2\Delta x_2 over [5.0 s,12.0 s][5.0\text{ s}, 12.0\text{ s}] to find x(5.0)x(5.0) before finding x0x_0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the time interval for the second segment: Δt2=12.0 s−5.0 s=7.0 s\Delta t_2 = 12.0\text{ s} - 5.0\text{ s} = 7.0\text{ s}.

  2. Calculate the displacement over segment 2: Δx2=v2⋅Δt2=(−6.0 m/s)(7.0 s)=−42.0 m\Delta x_2 = v_2 \cdot \Delta t_2 = (-6.0\text{ m/s})(7.0\text{ s}) = -42.0\text{ m}.

  3. Relate the positions: x(12.0)=x(5.0)+Δx2  ⟹  15.0 m=x(5.0)−42.0 mx(12.0) = x(5.0) + \Delta x_2 \implies 15.0\text{ m} = x(5.0) - 42.0\text{ m}, giving x(5.0)=57.0 mx(5.0) = 57.0\text{ m}.

  4. Use x(5.0)x(5.0) to find the starting position: x(5.0)=x0+v1Δt1  ⟹  57.0 m=x0+(8.0 m/s)(5.0 s)x(5.0) = x_0 + v_1 \Delta t_1 \implies 57.0\text{ m} = x_0 + (8.0\text{ m/s})(5.0\text{ s}), giving x0=17.0 mx_0 = 17.0\text{ m}.

Final answer

(a) x(5.0)=57.0 mx(5.0) = 57.0\text{ m}; (b) x0=17.0 mx_0 = 17.0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Avoid assuming x0=0x_0 = 0 unless the problem explicitly states that the object begins at the origin.

  • When a final or intermediate position is provided, write out x(t2)=x(t1)+vΔtx(t_2) = x(t_1) + v\Delta t and solve for the unknown coordinate by working backward.

Lock it in

Similar question

01

A drone moves along a straight horizontal track. From t=2.0 st = 2.0\text{ s} to t=6.0 st = 6.0\text{ s}, it flies with a steady velocity v=−4.0 m/sv = -4.0\text{ m/s}. If its coordinate at t=6.0 st = 6.0\text{ s} is x=10.0 mx = 10.0\text{ m}, find its position at t=2.0 st = 2.0\text{ s}.

Answer

Δt=6.0 s−2.0 s=4.0 s\Delta t = 6.0\text{ s} - 2.0\text{ s} = 4.0\text{ s}. The displacement is Δx=(−4.0 m/s)(4.0 s)=−16.0 m\Delta x = (-4.0\text{ m/s})(4.0\text{ s}) = -16.0\text{ m}. Since x(6.0)=x(2.0)+Δxx(6.0) = x(2.0) + \Delta x, we have x(2.0)=10.0 m−(−16.0 m)=26.0 mx(2.0) = 10.0\text{ m} - (-16.0\text{ m}) = 26.0\text{ m}.

02

A cyclist moves on an axis with three constant-velocity phases: v1=5.0 m/sv_1 = 5.0\text{ m/s} for t∈[0,4.0 s]t \in [0, 4.0\text{ s}], v2=0 m/sv_2 = 0\text{ m/s} for t∈[4.0 s,7.0 s]t \in [4.0\text{ s}, 7.0\text{ s}], and v3=−3.0 m/sv_3 = -3.0\text{ m/s} for t∈[7.0 s,11.0 s]t \in [7.0\text{ s}, 11.0\text{ s}]. Given the final position x(11.0)=8.0 mx(11.0) = 8.0\text{ m}, reconstruct the initial position x(0)x(0).

Answer

For phase 3, Δt3=11.0−7.0=4.0 s\Delta t_3 = 11.0 - 7.0 = 4.0\text{ s}, Δx3=(−3.0)(4.0)=−12.0 m\Delta x_3 = (-3.0)(4.0) = -12.0\text{ m}, so x(7.0)=8.0−(−12.0)=20.0 mx(7.0) = 8.0 - (-12.0) = 20.0\text{ m}. Phase 2 has zero displacement, so x(4.0)=20.0 mx(4.0) = 20.0\text{ m}. For phase 1, Δt1=4.0 s\Delta t_1 = 4.0\text{ s}, Δx1=(5.0)(4.0)=20.0 m\Delta x_1 = (5.0)(4.0) = 20.0\text{ m}, so x(0)=20.0−20.0=0.0 mx(0) = 20.0 - 20.0 = 0.0\text{ m}.

03

An autonomous rover records its position at t=9.0 st = 9.0\text{ s} as x=−5.0 mx = -5.0\text{ m}. It moved forward at +3.0 m/s+3.0\text{ m/s} on t∈[0,4.0 s]t \in [0, 4.0\text{ s}] and in reverse at a constant speed from t=4.0 st = 4.0\text{ s} to t=9.0 st = 9.0\text{ s}. If its initial position at t=0t = 0 was x0=12.0 mx_0 = 12.0\text{ m}, find the velocity during the second segment and the rover's peak position.

Answer

Peak position: x(4.0)=x0+v1Δt1=12.0 m+(3.0 m/s)(4.0 s)=24.0 mx(4.0) = x_0 + v_1 \Delta t_1 = 12.0\text{ m} + (3.0\text{ m/s})(4.0\text{ s}) = 24.0\text{ m}. For the second segment, Δt2=9.0 s−4.0 s=5.0 s\Delta t_2 = 9.0\text{ s} - 4.0\text{ s} = 5.0\text{ s}. The displacement is Δx2=x(9.0)−x(4.0)=−5.0 m−24.0 m=−29.0 m\Delta x_2 = x(9.0) - x(4.0) = -5.0\text{ m} - 24.0\text{ m} = -29.0\text{ m}. Thus, v2=−29.0 m5.0 s=−5.8 m/sv_2 = \frac{-29.0\text{ m}}{5.0\text{ s}} = -5.8\text{ m/s}.

Loading workspace…