Resources

In a single-loop DC circuit, an ideal 24.0 V24.0\text{ V} battery (directed such that traversing from node A to node B passes from its negative to its positive terminal) is placed in series with a resistor of resistance R1=5.00 ΩR_1 = 5.00\ \Omega, a secondary opposing ideal battery of terminal voltage 9.00 V9.00\text{ V} (oriented with its positive terminal facing the positive terminal of the first battery), and a second resistor R2=7.00 ΩR_2 = 7.00\ \Omega. (a) Choosing a clockwise loop traversal direction, write the signed Kirchhoff loop equation and solve for the loop current II. (b) Using the passive sign convention, calculate the electric potential difference VB−VAV_B - V_A across the first battery and the signed potential difference ΔVR\Delta V_R across resistor R1R_1 when traversing in the direction of the electric current.

Answer and steps

Final answer

(a) +24.0 V−I(5.00 Ω)−9.00 V−I(7.00 Ω)=0  ⟹  I=1.25 A+24.0\text{ V} - I(5.00\ \Omega) - 9.00\text{ V} - I(7.00\ \Omega) = 0 \implies I = 1.25\text{ A}; (b) Across the 24.0 V24.0\text{ V} source: VB−VA=+24.0 VV_B - V_A = +24.0\text{ V}; across R1R_1 in the direction of current: ΔVR1=−IR1=−(1.25 A)(5.00 Ω)=−6.25 V\Delta V_{R_1} = -I R_1 = -(1.25\text{ A})(5.00\ \Omega) = -6.25\text{ V}.

Steps

Part (a): Setting Up the Loop Equation and Finding Current II

  1. Understand Kirchhoff's Voltage Law (KVL): Kirchhoff's Voltage Law states that the algebraic sum of electric potential changes around any closed loop must equal zero: ∑ΔV=0\sum \Delta V = 0
  2. Determine Sign Conventions for Traversal: Let us traverse the loop in the specified clockwise direction:

    • First battery (E1=24.0 V\mathcal{E}_1 = 24.0\text{ V}): Traversing from node AA to node BB moves from the negative terminal to the positive terminal, resulting in a potential gain of +24.0 V+24.0\text{ V}.
    • Resistor R1=5.00 ΩR_1 = 5.00\ \Omega: Assuming a clockwise current II, moving along the direction of current across a resistor causes a potential drop of −IR1=−I(5.00 Ω)-I R_1 = -I(5.00\ \Omega).
    • Second battery (E2=9.00 V\mathcal{E}_2 = 9.00\text{ V}): Because its positive terminal opposes the positive terminal of the first battery, traversing in the clockwise direction passes from its positive terminal to its negative terminal, resulting in a potential drop of −9.00 V-9.00\text{ V}.
    • Resistor R2=7.00 ΩR_2 = 7.00\ \Omega: Traversing along the current direction causes another potential drop of −IR2=−I(7.00 Ω)-I R_2 = -I(7.00\ \Omega).
  3. Formulate and Solve the Equation: Substitute each potential change into the loop rule: +24.0 V−I(5.00 Ω)−9.00 V−I(7.00 Ω)=0+24.0\text{ V} - I(5.00\ \Omega) - 9.00\text{ V} - I(7.00\ \Omega) = 0

    Combine like terms: 15.0 V−I(12.00 Ω)=015.0\text{ V} - I(12.00\ \Omega) = 0 I=15.0 V12.00 Ω=1.25 AI = \frac{15.0\text{ V}}{12.00\ \Omega} = 1.25\text{ A}

    The positive result confirms that the actual current flows clockwise.


Part (b): Potential Differences Across Components

  1. Potential Difference Across the First Battery (VB−VAV_B - V_A):

    • Traversing from node AA (negative terminal) to node BB (positive terminal) moves to a region of higher electric potential.
    • Therefore: VB−VA=+24.0 VV_B - V_A = +24.0\text{ V}
  2. Signed Potential Difference Across Resistor R1R_1 (ΔVR1\Delta V_{R_1}):

    • By the passive sign convention, current enters the higher-potential terminal of a passive element and leaves the lower-potential terminal.
    • Traversing in the direction of the current therefore results in a potential drop: ΔVR1=−IR1\Delta V_{R_1} = -I R_1
    • Substituting the values: ΔVR1=−(1.25 A)(5.00 Ω)=−6.25 V\Delta V_{R_1} = -(1.25\text{ A})(5.00\ \Omega) = -6.25\text{ V}

(Common Pitfall: Do not confuse the sign of potential across an opposing emf source with that of a driving source. When traversing from the positive terminal to the negative terminal of a battery, it acts as a potential drop of −E-\mathcal{E}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats the two series batteries as aiding rather than opposing, adding their voltages instead of subtracting.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    24.0−5.00⋅I+9.00−7.00⋅I=024.0 - 5.00 \cdot I + 9.00 - 7.00 \cdot I = 0

    Correct

    +24.0−5.00⋅I−9.00−7.00⋅I=0+24.0 - 5.00 \cdot I - 9.00 - 7.00 \cdot I = 0

    When traversing clockwise, you pass from the positive terminal to the negative terminal of the opposing 9.00 V9.00\text{ V} battery, which corresponds to a potential drop of −9.00 V-9.00\text{ V} rather than a potential gain of +9.00 V+9.00\text{ V}.

  2. Step 2

    33.0−12.00⋅I=0  ⟹  I=33.0/12.00=2.75 A33.0 - 12.00 \cdot I = 0 \implies I = 33.0 / 12.00 = 2.75\text{ A}

    Correct

    15.0−12.00⋅I=0  ⟹  I=1.25 A15.0 - 12.00 \cdot I = 0 \implies I = 1.25\text{ A}

    Your algebra is carried out correctly from your setup, but the calculated current is affected by the +9.00 V+9.00\text{ V} sign error in Step 1.

  3. Step 3

    VB−VA=+24.0 VV_B - V_A = +24.0\text{ V}

  4. Step 4

    ΔVR=−I⋅R1=−(2.75)(5.00)=−13.75 V\Delta V_R = -I \cdot R_1 = -(2.75)(5.00) = -13.75\text{ V}

    Correct

    ΔVR1=−I⋅R1=−(1.25)(5.00)=−6.25 V\Delta V_{R_1} = -I \cdot R_1 = -(1.25)(5.00) = -6.25\text{ V}

    You applied the passive sign convention correctly with ΔV=−IR1\Delta V = -I R_1, but the numerical value is affected by your earlier calculation of I=2.75 AI = 2.75\text{ A}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the potential drops across both resistors along the direction of current as −IR-I R.

You correctly evaluated the potential rise VB−VA=+24.0 VV_B - V_A = +24.0\text{ V} across the primary battery.

You applied the passive sign convention consistently to find the signed voltage drop across R1R_1.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Opposing EMF Sign Convention

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the sign of an electromotive force (EMF) when traversing an opposing source; moving from the positive terminal to the negative terminal of a battery is an electric potential drop (−E-\mathcal{E}), not a gain (+E+\mathcal{E}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Battery Traversal Sign Rule
  • Traversing from negative to positive is +E+\mathcal{E} (potential rise); traversing from positive to negative is −E-\mathcal{E} (potential drop).

  • Trace the loop in the chosen traversal direction and label whether you enter the ++ or −- terminal first for every voltage source.

Net Driving EMF Check
  • In a single loop with two opposing batteries, the net EMF equals E1−E2\mathcal{E}_1 - \mathcal{E}_2.

  • Before solving the equation, verify whether the two batteries aid each other or fight each other to ensure the net voltage makes physical sense.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the corrected KVL equation: +24.0 V−I(5.00 Ω)−9.00 V−I(7.00 Ω)=0+24.0\text{ V} - I(5.00\ \Omega) - 9.00\text{ V} - I(7.00\ \Omega) = 0

  2. Combine constant voltage terms and resistance terms: 15.0 V−12.00 I=015.0\text{ V} - 12.00\ I = 0

  3. Solve for loop current: I=15.0 V12.00 Ω=1.25 AI = \frac{15.0\text{ V}}{12.00\ \Omega} = 1.25\text{ A}

  4. Recalculate the potential drop across R1R_1: ΔVR1=−IR1=−(1.25 A)(5.00 Ω)=−6.25 V\Delta V_{R_1} = -I R_1 = -(1.25\text{ A})(5.00\ \Omega) = -6.25\text{ V}

Final answer

(a) +24.0 V−I(5.00 Ω)−9.00 V−I(7.00 Ω)=0  ⟹  I=1.25 A+24.0\text{ V} - I(5.00\ \Omega) - 9.00\text{ V} - I(7.00\ \Omega) = 0 \implies I = 1.25\text{ A}; (b) VB−VA=+24.0 VV_B - V_A = +24.0\text{ V} and ΔVR1=−6.25 V\Delta V_{R_1} = -6.25\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always mark the ++ and −- signs directly on battery schematic symbols before tracing Kirchhoff loop equations.

  • Check that two series sources with facing positive terminals result in a subtracted net voltage Enet=E1−E2\mathcal{E}_{\text{net}} = \mathcal{E}_1 - \mathcal{E}_2.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the passive sign convention for the resistor voltage drop and reports a positive potential change in the direction of current.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    24.0−5.00⋅I−9.00−7.00⋅I=0  ⟹  15.0−12.00⋅I=0  ⟹  I=15.012.00=1.25 A24.0 - 5.00 \cdot I - 9.00 - 7.00 \cdot I = 0 \implies 15.0 - 12.00 \cdot I = 0 \implies I = \frac{15.0}{12.00} = 1.25\text{ A}

  2. Step 2

    VB−VA=+24.0 VV_B - V_A = +24.0\text{ V}

  3. Step 3

    ΔVR=I⋅R1=(1.25)(5.00)=+6.25 V\Delta V_R = I \cdot R_1 = (1.25)(5.00) = +6.25\text{ V}

    Correct

    ΔVR1=−IR1=−(1.25 A)(5.00 Ω)=−6.25 V\Delta V_{R_1} = -I R_1 = -(1.25\text{ A})(5.00\ \Omega) = -6.25\text{ V}

    Moving across a resistor in the same direction as the electric current leads to a decrease in electric potential (a potential drop). Therefore, the signed change is ΔV=−IR1=−6.25 V\Delta V = -I R_1 = -6.25\text{ V} rather than +6.25 V+6.25\text{ V}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied Kirchhoff's Voltage Law with proper signs for both batteries and resistors to determine the loop current.

You correctly computed the potential gain across the driving battery from terminal A to terminal B.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error on passive component potential difference

You calculated the magnitude IR1I R_1 correctly, but omitted the negative sign indicating that potential decreases along the direction of current.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the absolute Ohm's law magnitude (V=IRV = IR) with the signed directional potential difference (ΔV=Vfinal−Vinitial=−IR\Delta V = V_\text{final} - V_\text{initial} = -IR) across a resistor traversed in the direction of current.

REASONING PATH
Your ACEpath teacher’s suggested approach
Directional Potential Change Across Resistors
  • When moving across a resistor of resistance RR in the direction of current II, electric potential decreases: ΔV=−IR\Delta V = -I R.

  • Always check whether your traversal path goes with the current (potential drop: −IR-IR) or against the current (potential rise: +IR+IR).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that current I=1.25 AI = 1.25\text{ A} flows through R1R_1 in the traversal direction.

  2. Apply the passive sign convention: traversing in the direction of current across a resistor results in a potential drop ΔVR1=−IR1\Delta V_{R_1} = -I R_1.

  3. Substitute the numerical values: ΔVR1=−(1.25 A)(5.00 Ω)=−6.25 V\Delta V_{R_1} = -(1.25\text{ A})(5.00\ \Omega) = -6.25\text{ V}.

Final answer

(a) I=1.25 AI = 1.25\text{ A}; (b) VB−VA=+24.0 VV_B - V_A = +24.0\text{ V}, ΔVR1=−6.25 V\Delta V_{R_1} = -6.25\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how electric potential energy changes when charge moves through passive components versus active sources.

  • Practice labeling the '+' and '−' polarity markings across resistors based on current entry and exit points before evaluating ΔV\Delta V.

OverviewACEpath Teacher's Diagnosis

03 The student adds a potential drop across an ideal battery proportional to the loop current as if it had internal resistance equal to R1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    24.0−5.00⋅I−9.00−7.00⋅I=0  ⟹  15.0−12.00⋅I=0  ⟹  I=15.0/12.00=1.25 A24.0 - 5.00 \cdot I - 9.00 - 7.00 \cdot I = 0 \implies 15.0 - 12.00 \cdot I = 0 \implies I = 15.0 / 12.00 = 1.25\text{ A}

  2. Step 2

    VB−VA=24.0−I⋅R1=24.0−6.25=+17.75 VV_B - V_A = 24.0 - I \cdot R_1 = 24.0 - 6.25 = +17.75\text{ V}

    Correct

    VB−VA=+24.0 VV_B - V_A = +24.0\text{ V}

    The problem states that the battery between node AA and node BB is an ideal voltage source with no internal resistance. Moving from its negative terminal AA to its positive terminal BB yields an exact potential rise of +24.0 V+24.0\text{ V}. You subtracted the voltage drop of resistor R1R_1, treating R1R_1 as if it were internal to the battery or part of the branch between AA and BB.

  3. Step 3

    ΔVR=−I⋅R1=−(1.25)(5.00)=−6.25 V\Delta V_R = -I \cdot R_1 = -(1.25)(5.00) = -6.25\text{ V}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly formulated the clockwise Kirchhoff loop equation with accurate signs for both batteries and resistors.

You calculated the loop current I=1.25 AI = 1.25\text{ A} accurately.

You used the passive sign convention correctly to compute the potential drop across resistor R1R_1.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ideal battery terminal voltage confused with non-ideal source or series branch

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the potential difference across an isolated ideal voltage source with the terminal voltage of a real battery (V=E−IrV = \mathcal{E} - I r) or the combined voltage across both the source and the adjacent resistor R1R_1.

REASONING PATH
Your ACEpath teacher’s suggested approach
Ideal Voltage Source vs. Real Battery
  • For an ideal voltage source of emf E\mathcal{E} connected between terminals AA and BB, the potential difference is strictly fixed by the emf: V+−V−=EV_+ - V_- = \mathcal{E}, regardless of the current flowing through it.

  • Check whether a battery is specified as ideal; if so, do not subtract an IRI R term unless internal resistance is explicitly given inside that component.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the component between nodes AA and BB: it is exclusively the ideal 24.0 V24.0\text{ V} battery.

  2. Because traversing from node AA to node BB moves from the negative terminal to the positive terminal, the potential change is simply the emf of the battery: VB−VA=+E1V_B - V_A = +\mathcal{E}_1.

  3. Substitute the value: VB−VA=+24.0 VV_B - V_A = +24.0\text{ V}.

Final answer

VB−VA=+24.0 VV_B - V_A = +24.0\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between an ideal emf source (V=EV = \mathcal{E}) and a real source with internal resistance (V=E−IrV = \mathcal{E} - I r).

  • Practice defining node boundaries clearly so that external resistors are not included when finding potential differences across single components.

Lock it in

Similar question

01

A single loop contains a 18.0 V18.0\text{ V} battery, an opposing 6.0 V6.0\text{ V} battery, and a single resistor R=4.0 ΩR = 4.0\ \Omega. Find the magnitude of the electric current II in the loop.

Answer

I=3.0 AI = 3.0\text{ A}. Key steps: Net EMF is Enet=18.0 V−6.0 V=12.0 V\mathcal{E}_{\text{net}} = 18.0\text{ V} - 6.0\text{ V} = 12.0\text{ V}; then apply Ohm's law I=EnetR=12.0 V4.0 Ω=3.0 AI = \frac{\mathcal{E}_{\text{net}}}{R} = \frac{12.0\text{ V}}{4.0\ \Omega} = 3.0\text{ A}.

02

In a single-loop circuit traversed clockwise, you encounter in order: battery E1=30.0 V\mathcal{E}_1 = 30.0\text{ V} (from −- to ++), resistor R1=3.00 ΩR_1 = 3.00\ \Omega, battery E2=10.0 V\mathcal{E}_2 = 10.0\text{ V} (from ++ to −-), and resistor R2=2.00 ΩR_2 = 2.00\ \Omega. (a) Determine the loop current II. (b) Calculate the signed potential difference across R2R_2 along the current direction.

Answer

(a) I=4.00 AI = 4.00\text{ A}; (b) ΔVR2=−8.00 V\Delta V_{R_2} = -8.00\text{ V}. Key steps: KVL gives +30.0−3.00I−10.0−2.00I=0  ⟹  20.0−5.00I=0  ⟹  I=4.00 A+30.0 - 3.00 I - 10.0 - 2.00 I = 0 \implies 20.0 - 5.00 I = 0 \implies I = 4.00\text{ A}; across R2R_2, ΔV=−IR2=−(4.00 A)(2.00 Ω)=−8.00 V\Delta V = -I R_2 = -(4.00\text{ A})(2.00\ \Omega) = -8.00\text{ V}.

03

A circuit loop consists of three batteries and a 10.0 Ω10.0\ \Omega resistor connected in series: E1=25.0 V\mathcal{E}_1 = 25.0\text{ V} (aiding), E2=5.0 V\mathcal{E}_2 = 5.0\text{ V} (opposing), and E3=8.0 V\mathcal{E}_3 = 8.0\text{ V} (opposing). What is the loop current II, and which battery is being recharged (absorbing electrical power)?

Answer

I=1.20 AI = 1.20\text{ A}; both E2\mathcal{E}_2 and E3\mathcal{E}_3 absorb power (are recharged). Key steps: Net EMF is ∑E=25.0 V−5.0 V−8.0 V=12.0 V\sum \mathcal{E} = 25.0\text{ V} - 5.0\text{ V} - 8.0\text{ V} = 12.0\text{ V}; loop current is I=12.0 V10.0 Ω=1.20 AI = \frac{12.0\text{ V}}{10.0\ \Omega} = 1.20\text{ A} clockwise. Since current enters the positive terminals of E2\mathcal{E}_2 and E3\mathcal{E}_3, both are absorbing power.

Loading workspace…