Resources
In a physics laboratory experiment to measure the local magnetic field, a rigid conducting rod of length and mass is suspended horizontally by two light vertical contact wires connected to an overhead analytical balance. The rod carries a steady direct current flowing horizontally to the east. A uniform horizontal magnetic field directed horizontally to the north acts on the rod, exerting a magnetic Lorentz force. Take . (a) Classify the magnetic Lorentz force, the downward gravitational force, and the upward mechanical wire tension as contact or non-contact forces. (b) Determine the direction of the non-contact magnetic force and calculate the total reading of upward contact tension measured by the suspension wires.
Answer and steps
Final answer
(a) Magnetic Lorentz force: non-contact force; Gravitational force: non-contact force; Wire tension: contact force; (b) Direction: vertically upward;
Steps
Direction and Magnitude of the Magnetic Force
Part (a): Classifying the Forces
Forces in physics are broadly classified into two categories based on whether physical touch between objects is required:
- Contact forces require direct physical touch between the interacting bodies.
- Wire tension (): Contact force, because it arises directly from the physical mechanical connection between the suspension wires and the surface of the rod.
- Non-contact forces (field forces) act over a distance through a field without requiring physical contact.
- Gravitational force (): Non-contact force, because Earth's gravitational field pulls on the rod's mass across space without touching it.
- Magnetic Lorentz force (): Non-contact force, because an external magnetic field exerts a force on the moving charges within the conductor through the electromagnetic field without physical contact.
Part (b): Direction of Magnetic Force and Total Tension
The magnetic force on a straight current-carrying wire in a uniform magnetic field is given by:
-
Direction: Use the right-hand rule for the vector cross product:
- Point the fingers or thumb of your right hand in the direction of the conventional current (horizontally to the East).
- Direct your fingers toward the magnetic field (horizontally to the North).
- Your palm / thumb points vertically upward.
- Therefore, the magnetic force acts vertically upward.
- Magnitude: Since the current flows East and the magnetic field points North, the angle between them is :
Magnitude of the Gravitational Force
The downward gravitational force (weight) is:
Equilibrium and Total Wire Tension
The rod is suspended horizontally in static equilibrium. The sum of forces along the vertical axis must equal zero ():
Solving for the total wire tension:
Common Pitfall: Do not add the magnetic force to the weight. Because the magnetic force points upward, it partially supports the rod, thereby reducing the tension measured by the suspension wires.
Typical errors
01 The student misapplies the right-hand rule by reversing the vector cross product or using the left hand, concluding the magnetic force points downward and adding it to gravity.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Magnetic Lorentz force: non-contact force ⟹ Gravitational force: non-contact force ⟹ Wire tension: contact force
- Step 2Correct
Using the right-hand rule for the cross product , when you point your right index finger East and your middle finger North, your thumb points vertically upward, not downward.
- Step 3
- Step 4Correct
Because the magnetic force points upward, it partially supports the rod alongside wire tension. Your setup added the two forces due to the reversed direction from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly classified all three physical forces as contact or non-contact.
You correctly calculated the magnitude of the magnetic Lorentz force using .
You correctly calculated the gravitational weight using .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou reversed the vertical orientation of the vector cross product when applying the right-hand rule.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMisidentifying the direction of a vector cross product in a horizontal reference plane, likely by either using the left hand or curling fingers from the second vector into the first instead of into .
REASONING PATH
Your ACEpath teacher’s suggested approach- Right-Hand Rule for $\vec{F}_B = I(\vec{L} \times \vec{B})$
Always use your right hand: point fingers/index along conventional current (East), curl or point middle finger along (North); your outstretched thumb points in the direction of (Upward).
Lay your hand flat palm-up facing North with fingers pointing East, then check that your thumb points toward the ceiling.
- Vertical Equilibrium Check
An upward magnetic force relieves tension on an overhead support: .
Compare your calculated tension to the rod's weight (). An upward magnetic boost must make smaller than .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the right-hand rule for : with directed East and directed North, points vertically upward.
Set up vertical static equilibrium: .
Solve for the total wire tension: .
Direction: vertically upward;
02 The student assumes tension simply balances the rod's weight, ignoring the magnetic Lorentz force in the vertical equilibrium equation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Magnetic Lorentz force: non-contact force Gravitational force: non-contact force Wire tension: contact force
- Step 2
- Step 3
- Step 4Correct
You omitted the upward magnetic force from the vertical force balance. Because the magnetic force already pulls upward on the rod, the suspension wires only need to support the remaining difference between the gravitational force and the magnetic force.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly distinguished between contact and non-contact forces for all three interactions.
You accurately determined the direction of the magnetic force using the vector cross product rule.
You calculated both individual force magnitudes ( and ) with complete precision.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou defaulted to the common single-force balance formula for a suspended object, neglecting to construct a complete free-body diagram that includes all acting vertical forces.
REASONING PATH
Your ACEpath teacher’s suggested approach- Construct a Complete Free-Body Diagram
For an object in static equilibrium, , including every upward and downward force regardless of whether it is a contact or non-contact force.
Sketch all vertical vectors acting on the rod: upward tension , upward magnetic force , and downward weight .
- Write the Full Equilibrium Equation
Upward forces must balance downward forces: .
Isolate the target variable algebraically () before substituting numerical values.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up Newton's first law for the vertical axis: .
Rearrange to solve for the contact tension: .
Substitute the calculated forces: .
0.326 N
03 The student confuses the cross-product direction with the plane of current and field, mistakenly stating the magnetic force acts horizontally to the south.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Magnetic Lorentz force : non-contact force Gravitational force : non-contact force Wire tension : contact force
- Step 2
Direction of magnetic force : horizontally south
CorrectDirection of magnetic force : vertically upward
The magnetic force vector is given by . Since the current flows east and the magnetic field points north, their cross product must be perpendicular to the horizontal plane. By the right-hand rule, pointing your fingers east and curling them north gives a thumb pointing vertically upward, not south.
- Step 3
- Step 4Correct
Because of the misidentified horizontal direction in Step 2, you combined the forces in quadrature. Since the magnetic force actually acts vertically upward along the same line as tension and gravity, you should set up a vertical equilibrium equation: .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly classified all three forces into contact and non-contact forces.
You correctly computed the magnitude of the magnetic force using .
You accurately evaluated the gravitational force using .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this is a conceptual error involving the 3D geometry of the vector cross product .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the cross product as lying within the same plane as the current and magnetic field vectors (the horizontal plane) rather than being strictly perpendicular to both. When two vectors lie in the horizontal plane (East and North), their cross product must lie along the vertical axis (up or down).
REASONING PATH
Your ACEpath teacher’s suggested approach- Right-Hand Rule for $\vec{L} \times \vec{B}$
The cross product is always strictly perpendicular to both and .
Whenever current and field are both horizontal, immediately rule out all horizontal compass directions (North, South, East, West) for the magnetic force; it must point either vertically upward or vertically downward.
- Vertical Equilibrium with Magnetic Upthrust
When collinear vertical forces act on a body in static equilibrium, .
Sum the upward forces () and equate them to the downward weight (), yielding .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the right-hand rule to : current points East (), magnetic field points North ().
Compute the vector cross product: (vertically upward).
Apply vertical static equilibrium along the -axis: .
Solve for total wire tension: .
(a) Magnetic Lorentz force: non-contact force; Gravitational force: non-contact force; Wire tension: contact force; (b) Direction: vertically upward;
Lock it in
How do you use the right-hand rule to find the direction of the magnetic force on a current-carrying wire?
Point your right index finger along current , point your middle finger along field , and your upright thumb points along . Always use your right hand, never your left.
Similar question
A conducting wire of mass is suspended horizontally by two vertical strings in a uniform horizontal magnetic field directed to the West. A current of flows through the wire to the North. Take . (a) Determine the direction of the magnetic force. (b) Calculate the total tension in the suspension strings.
Answer
(a) Vertically upward (North West = Up). (b) ; . In equilibrium, .
A rigid horizontal rod of length and mass is supported by two spring balances in a uniform horizontal magnetic field of directed South. A current of flows East. Take . Determine the magnetic force vector and the total reading of the two spring balances.
Answer
Direction: . Magnitude: . Weight: . Because both non-contact forces act downward, the contact tension must support both: .
A horizontal metal bar of length and mass rests on a sensitive electronic scale (a contact support from below). A steady current flows horizontally East. A horizontal magnetic field points North. Take . (a) Classify the normal force exerted by the scale as contact or non-contact. (b) Calculate the normal force reading on the scale. Does the scale read more, less, or zero compared to the bar's resting weight?
Answer
(a) Contact force (requires physical touch between scale and bar). (b) points vertically upward: . The downward gravitational force is . Because , the upward magnetic force exceeds the rod's weight, lifting the rod off the scale completely. Thus, the normal force is (the scale reads zero, less than the resting weight of ).