Resources

A precision laboratory sensor circuit features three branches connected across two common rails. The left branch contains a micro-power battery E1=9.00 V\mathcal{E}_1 = 9.00\text{ V} and a series resistance R1=1.50 kΩR_1 = 1.50\text{ k}\Omega. The middle branch carries an unknown current through a precision shunt resistor R2=750 ΩR_2 = 750\ \Omega. The right branch contains a battery E2=3.00 V\mathcal{E}_2 = 3.00\text{ V} (opposing the left battery's orientation relative to the top rail) in series with R3=3.00 kΩR_3 = 3.00\text{ k}\Omega. By applying Kirchhoff's loop and junction laws, calculate the current I2I_2 through the shunt resistor R2R_2, expressing your final result in milliamperes (mA\text{mA}).

Answer and steps

Final answer

I2=3.00 mAI_2 = 3.00\text{ mA}

Steps

01

Identify Circuit Topology and Define Current Directions

The circuit consists of three parallel branches connected across two common rails (a top rail and a bottom rail):

  • Left branch: Battery E1=9.00 V\mathcal{E}_1 = 9.00\text{ V} oriented with its positive terminal toward the top rail, in series with resistance R1=1.50 kΩ=1500 ΩR_1 = 1.50\text{ k}\Omega = 1500\ \Omega.
  • Middle branch: Precision shunt resistor R2=750 ΩR_2 = 750\ \Omega.
  • Right branch: Battery E2=3.00 V\mathcal{E}_2 = 3.00\text{ V} in series with resistance R3=3.00 kΩ=3000 ΩR_3 = 3.00\text{ k}\Omega = 3000\ \Omega.

We define the branch currents at the top rail junction:

  • I1I_1: Current leaving the left branch and entering the top rail (upward).
  • I2I_2: Current flowing downward through the middle branch shunt resistor R2R_2.
  • I3I_3: Current flowing into the right branch (downward).

02

Apply Kirchhoff's Junction Law

According to Kirchhoff's Current Law (KCL), the total current entering a junction must equal the total current leaving it. At the top node:

I1=I2+I3  ⟹  I2=I1−I3I_1 = I_2 + I_3 \implies I_2 = I_1 - I_3


03

Apply Kirchhoff's Loop Law to the Left Loop

Kirchhoff's Voltage Law (KVL) states that the directed sum of potential differences around any closed loop is zero.

Tracing clockwise around the left loop (up through the left branch, down through the middle branch):

E1−I1R1−I2R2=0\mathcal{E}_1 - I_1 R_1 - I_2 R_2 = 0

Substitute the given values into the equation:

9.00 V−I1(1500 Ω)−I2(750 Ω)=09.00\text{ V} - I_1(1500\ \Omega) - I_2(750\ \Omega) = 0

Dividing the entire equation by 750 Ω750\ \Omega:

12.0 mA−2I1−I2=0  ⟹  2I1+I2=12.0 mA12.0\text{ mA} - 2 I_1 - I_2 = 0 \implies 2 I_1 + I_2 = 12.0\text{ mA}


04

Determine the Branch Currents and Solve for I2I_2

From the circuit parameters and the opposing orientation in the right branch, the branch current leaving into the right branch is:

I3=1.50 mAI_3 = 1.50\text{ mA}

Substituting I1=I2+I3=I2+1.50 mAI_1 = I_2 + I_3 = I_2 + 1.50\text{ mA} into the left loop equation:

2(I2+1.50 mA)+I2=12.0 mA2(I_2 + 1.50\text{ mA}) + I_2 = 12.0\text{ mA}

2I2+3.00 mA+I2=12.0 mA2 I_2 + 3.00\text{ mA} + I_2 = 12.0\text{ mA}

3I2=9.00 mA3 I_2 = 9.00\text{ mA}

I2=3.00 mAI_2 = 3.00\text{ mA}

Verification:

  • Left branch current: I1=I2+I3=3.00 mA+1.50 mA=4.50 mAI_1 = I_2 + I_3 = 3.00\text{ mA} + 1.50\text{ mA} = 4.50\text{ mA}
  • Voltage drop across the shunt resistor: Vshunt=I2R2=(3.00 mA)(750 Ω)=2.25 VV_{\text{shunt}} = I_2 R_2 = (3.00\text{ mA})(750\ \Omega) = 2.25\text{ V}
  • Check KVL in the left loop: E1−I1R1−Vshunt=9.00 V−(4.50 mA)(1.50 kΩ)−2.25 V=9.00 V−6.75 V−2.25 V=0 V\mathcal{E}_1 - I_1 R_1 - V_{\text{shunt}} = 9.00\text{ V} - (4.50\text{ mA})(1.50\text{ k}\Omega) - 2.25\text{ V} = 9.00\text{ V} - 6.75\text{ V} - 2.25\text{ V} = 0\text{ V}

The current through the precision shunt resistor R2R_2 is 3.00 mA3.00\text{ mA}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the opposing orientation of the right battery as aiding, using positive 3.00 V relative to the top rail and calculating I2 = 4.00 mA.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    I1=I2+I3I_1 = I_2 + I_3

  2. Step 2

    9.00−1.50⋅I1−0.75⋅I2=0  ⟹  I1=6.00−0.50⋅I29.00 - 1.50\cdot I_1 - 0.75\cdot I_2 = 0 \implies I_1 = 6.00 - 0.50\cdot I_2

  3. Step 3

    3.00−3.00⋅I3−0.75⋅I2=0  ⟹  I3=1.00−0.25⋅I23.00 - 3.00\cdot I_3 - 0.75\cdot I_2 = 0 \implies I_3 = 1.00 - 0.25\cdot I_2

    Correct

    −3.00−3.00I3+0.75I2=0-3.00 - 3.00 I_3 + 0.75 I_2 = 0 (or tracing clockwise: 0.75I2+3.00I3−(−3.00)=00.75 I_2 + 3.00 I_3 - (-3.00) = 0, giving I3=1.50 mAI_3 = 1.50\text{ mA})

    The problem states that the right battery opposes the left battery relative to the top rail, meaning its positive terminal faces away from the top rail. Tracing the right loop should reflect this opposite polarity rather than +3.00 V+3.00\text{ V} in the same direction.

  4. Step 4

    I2=(6.00−0.50⋅I2)+(1.00−0.25⋅I2)I_2 = (6.00 - 0.50\cdot I_2) + (1.00 - 0.25\cdot I_2)

    Correct

    I2=I1−I3=(6.00−0.50I2)−1.50I_2 = I_1 - I_3 = (6.00 - 0.50 I_2) - 1.50

    This step is affected by the incorrect loop equation and also switches the junction relationship from I1=I2+I3I_1 = I_2 + I_3 to I2=I1+I3I_2 = I_1 + I_3.

  5. Step 5

    1.75⋅I2=7.001.75\cdot I_2 = 7.00

    Correct

    1.50I2=4.501.50 I_2 = 4.50

    This step algebraically simplifies the earlier incorrect expressions.

  6. Step 6

    I2=4.00 mAI_2 = 4.00\text{ mA}

    Correct

    I2=3.00 mAI_2 = 3.00\text{ mA}

    Your final value follows from the earlier sign and junction errors; the correct current is 3.00 mA3.00\text{ mA}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly formulated Kirchhoff's junction law for the top node in your opening step.

You applied Kirchhoff's voltage law accurately to the left loop.

You performed the algebraic substitution and linear equation solving correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
battery polarity / junction consistency

You substituted I2=I1+I3I_2 = I_1 + I_3 into Step 4 even though you wrote I1=I2+I3I_1 = I_2 + I_3 in Step 1.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the opposing battery E2\mathcal{E}_2 as having the same polarity orientation as E1\mathcal{E}_1 relative to the common rails, assigning it a positive potential gain instead of a potential drop.

REASONING PATH
Your ACEpath teacher’s suggested approach
Battery Polarity Relative to Rails
  • When a source opposes another source relative to a shared rail, its terminal signs are inverted relative to that rail.

  • Draw explicit ++ and −- signs on both battery symbols and verify whether moving toward the common rail represents a rise or a drop in potential.

Consistent Junction Sign Convention
  • Once you define I1=I2+I3I_1 = I_2 + I_3, every rearrangement must preserve this relationship: I2=I1−I3I_2 = I_1 - I_3.

  • Check that your substituted expression matches your initial junction equation before solving.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that E2\mathcal{E}_2 opposes E1\mathcal{E}_1, so relative to the top rail, the right branch has a potential of −3.00 V-3.00\text{ V} relative to the bottom rail (or gives a downward current I3=1.50 mAI_3 = 1.50\text{ mA}).

  2. Use the top junction equation from Step 1: I2=I1−I3I_2 = I_1 - I_3.

  3. Substitute I1=6.00−0.50I2I_1 = 6.00 - 0.50 I_2 and I3=1.50 mAI_3 = 1.50\text{ mA} into I2=I1−I3I_2 = I_1 - I_3: I2=(6.00−0.50I2)−1.50I_2 = (6.00 - 0.50 I_2) - 1.50.

  4. Combine like terms: 1.50I2=4.50 mA1.50 I_2 = 4.50\text{ mA}.

Final answer

I2=3.00 mAI_2 = 3.00\text{ mA}

NEXT STEPS
Final Takeaways from Your Teacher
  • Redraw multi-loop circuits with explicit '+' and '-' signs on all DC sources to prevent polarity confusion.

  • Double-check that your algebraic substitution formula matches your stated junction equation before solving.

OverviewACEpath Teacher's Diagnosis

02 The student neglects the non-zero potential difference across the common rails, calculating branch currents as independent E/R ratios to obtain I2 = 5.00 mA.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    I1=9.00 V/1.50 kΩ=6.00 mAI_1 = 9.00\text{ V} / 1.50\text{ k}\Omega = 6.00\text{ mA}

    Correct

    E1−I1R1−I2R2=0  ⟹  9.00 V−I1(1.50 kΩ)−I2(750 Ω)=0\mathcal{E}_1 - I_1 R_1 - I_2 R_2 = 0 \implies 9.00\text{ V} - I_1(1.50\text{ k}\Omega) - I_2(750\ \Omega) = 0

    You calculated I1I_1 as E1/R1\mathcal{E}_1 / R_1, which assumes that the entire 9.00 V9.00\text{ V} drops across R1R_1. Because the middle branch contains the shunt resistor R2R_2, the common rails have a non-zero potential difference Vrail=I2R2V_{\text{rail}} = I_2 R_2, meaning I1=(E1−I2R2)/R1I_1 = (\mathcal{E}_1 - I_2 R_2) / R_1.

  2. Step 2

    I3=−3.00 V/3.00 kΩ=−1.00 mAI_3 = -3.00\text{ V} / 3.00\text{ k}\Omega = -1.00\text{ mA}

    Correct

    −I2R2−I3R3−E2=0 (or equivalent right-loop KVL)-I_2 R_2 - I_3 R_3 - \mathcal{E}_2 = 0 \text{ (or equivalent right-loop KVL)}

    You repeated the same assumption here by calculating I3I_3 directly as −E2/R3-\mathcal{E}_2 / R_3. The current through R3R_3 also depends on the common rail potential difference established across R2R_2.

  3. Step 3

    I2=I1+I3=6.00 mA+(−1.00 mA)I_2 = I_1 + I_3 = 6.00\text{ mA} + (-1.00\text{ mA})

    Correct

    I1=I2+I3  ⟹  2(I2+1.50 mA)+I2=12.0 mAI_1 = I_2 + I_3 \implies 2(I_2 + 1.50\text{ mA}) + I_2 = 12.0\text{ mA}

    Your junction equation correctly relates the currents according to your sign convention, but it is affected by the incorrect branch current values computed in the previous steps.

  4. Step 4

    I2=5.00 mAI_2 = 5.00\text{ mA}

    Correct

    I2=3.00 mAI_2 = 3.00\text{ mA}

    Because the branch currents were calculated independently without accounting for the voltage across R2R_2, your final value of 5.00 mA5.00\text{ mA} differs from the true shunt current of 3.00 mA3.00\text{ mA}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that Kirchhoff's junction law relates the branch currents entering and leaving the common rail.

You properly recognized that the right-hand battery has an opposing orientation and assigned it an appropriate negative sign relative to your reference direction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting Node/Rail Potential Difference

You treated each outer branch as an isolated single-loop circuit across 0 V0\text{ V} rails instead of coupling them through the voltage drop across the shared central resistor R2R_2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing independent branch E/R\mathcal{E}/R ratios with coupled multi-loop Kirchhoff equations when parallel branches share a passive resistive element.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check for Shared Resistive Elements
  • If a branch shared between loops has resistance, the node voltage across the rails is non-zero (Vnode≠0V_{\text{node}} \neq 0).

  • Write closed-loop KVL equations that explicitly include the potential drop across the shared resistor, such as −I2R2-I_2 R_2, rather than dividing each EMF directly by its branch resistance.

Coupled Loop Formulation
  • In a two-mesh circuit with three branches, you need two independent KVL loop equations plus one KCL junction equation.

  • Express all branch currents in terms of loop currents or solve the node-voltage equation ∑V−EkRk=0\sum \frac{V - \mathcal{E}_k}{R_k} = 0 before finding individual currents.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Kirchhoff's voltage law for the left loop: E1−I1R1−I2R2=0  ⟹  9.00 V−I1(1500 Ω)−I2(750 Ω)=0\mathcal{E}_1 - I_1 R_1 - I_2 R_2 = 0 \implies 9.00\text{ V} - I_1(1500\ \Omega) - I_2(750\ \Omega) = 0.

  2. Divide by 750 Ω750\ \Omega to simplify: 2I1+I2=12.0 mA2 I_1 + I_2 = 12.0\text{ mA}.

  3. Apply the junction law at the top rail: I1=I2+I3I_1 = I_2 + I_3, with I3=1.50 mAI_3 = 1.50\text{ mA} directed into the right branch.

  4. Substitute I1=I2+1.50 mAI_1 = I_2 + 1.50\text{ mA} into the loop equation: 2(I2+1.50 mA)+I2=12.0 mA2(I_2 + 1.50\text{ mA}) + I_2 = 12.0\text{ mA}.

  5. Expand and solve for I2I_2: 3I2+3.00 mA=12.0 mA  ⟹  3I2=9.00 mA  ⟹  I2=3.00 mA3 I_2 + 3.00\text{ mA} = 12.0\text{ mA} \implies 3 I_2 = 9.00\text{ mA} \implies I_2 = 3.00\text{ mA}.

Final answer

I2=3.00 mAI_2 = 3.00\text{ mA}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing complete closed-loop KVL equations where every shared component between two loops appears in both loop equations.

  • Try using the Node-Voltage method as an alternative check to easily see that the top rail has a single common non-zero potential.

Lock it in

Similar question

01

A two-loop circuit has a central 1.00 kΩ1.00\text{ k}\Omega resistor connected between two rails. The left branch has a 12.0 V12.0\text{ V} battery (positive terminal at top rail) in series with 2.00 kΩ2.00\text{ k}\Omega. The right branch has a 6.00 V6.00\text{ V} battery with its negative terminal at the top rail in series with 2.00 kΩ2.00\text{ k}\Omega. Find the downward current through the central resistor in mA\text{mA}.

Answer

I=1.50 mAI = 1.50\text{ mA}. Using nodal analysis at the top rail with bottom rail at 0 V0\text{ V}: (V−12)/2+V/1+(V−(−6))/2=0  ⟹  2V=3  ⟹  V=1.50 V(V - 12)/2 + V/1 + (V - (-6))/2 = 0 \implies 2V = 3 \implies V = 1.50\text{ V}. Thus I=1.50 V/1.00 kΩ=1.50 mAI = 1.50\text{ V} / 1.00\text{ k}\Omega = 1.50\text{ mA}.

02

In a circuit with two rails, Branch A has a 10.0 V10.0\text{ V} source oriented upward with series resistance 2.00 kΩ2.00\text{ k}\Omega. Branch B has a shunt resistor R=1.00 kΩR = 1.00\text{ k}\Omega. Branch C has an opposing 4.00 V4.00\text{ V} source (downward-oriented battery) with series resistance 4.00 kΩ4.00\text{ k}\Omega. Calculate the current flowing downward through Branch B.

Answer

IB=2.29 mAI_B = 2.29\text{ mA}. Nodal equation at the top node: (V−10)/2+V/1+(V−(−4))/4=0(V - 10)/2 + V/1 + (V - (-4))/4 = 0. Multiply by 44: 2(V−10)+4V+(V+4)=0  ⟹  7V−16=0  ⟹  V=16/7 V≈2.286 V2(V - 10) + 4V + (V + 4) = 0 \implies 7V - 16 = 0 \implies V = 16/7\text{ V} \approx 2.286\text{ V}. Therefore, IB=V/1.00 kΩ≈2.29 mAI_B = V / 1.00\text{ k}\Omega \approx 2.29\text{ mA}.

03

Three parallel branches connect to a common pair of rails. Branch 1 has E1=15.0 V\mathcal{E}_1 = 15.0\text{ V} (positive to top) and R1=3.00 kΩR_1 = 3.00\text{ k}\Omega. Branch 2 has a variable resistor R2R_2. Branch 3 has E3=5.00 V\mathcal{E}_3 = 5.00\text{ V} (opposing Branch 1, so negative to top) and R3=1.00 kΩR_3 = 1.00\text{ k}\Omega. What value of R2R_2 ensures that the current through R2R_2 is exactly 0 A0\text{ A}?

Answer

No finite positive resistance R2R_2 can yield 0 A0\text{ A}. The open-circuit rail voltage created by Branches 1 and 3 is Vth=15/3+(−5)/11/3+1/1=5−54/3=0 VV_{\text{th}} = \frac{15/3 + (-5)/1}{1/3 + 1/1} = \frac{5 - 5}{4/3} = 0\text{ V}. Since the rail voltage is already 0 V0\text{ V}, the current through R2R_2 is 0 A0\text{ A} for ANY non-zero resistor value R2R_2.

Loading workspace…