Resources

A satellite orbits a spherical asteroid of uniform density ρ=3.20×103 kg/m3\rho = 3.20 \times 10^3\text{ kg/m}^3 in a circular trajectory of radius r=R+hr = R + h, where RR is the asteroid radius and hh is orbital altitude. (a) Derive the expression for the orbital period TT as the orbital altitude approaches zero (h→0h \to 0, grazing orbit limit) in terms of Newton's gravitational constant GG and density ρ\rho. (b) Using G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2, compute the asymptotic limiting period TlimitT_{\text{limit}} in seconds and the corresponding orbital frequency flimitf_{\text{limit}} in hertz (Hz\text{Hz}).

Answer and steps

Final answer

(a) Tlimit=3πGρT_{\text{limit}} = \sqrt{\frac{3\pi}{G\rho}}; (b) Tlimit=6.64×103 sT_{\text{limit}} = 6.64 \times 10^3\text{ s} (1.84 h1.84\text{ h}), flimit=1.51×10−4 Hzf_{\text{limit}} = 1.51 \times 10^{-4}\text{ Hz}

Steps

Part (a): Derivation of the Limiting Orbital Period

  1. Equate Centripetal Force and Gravitational Force: For a satellite of mass mm orbiting a spherical asteroid of mass MM in a circular path of radius r=R+hr = R + h, Newton's law of universal gravitation provides the required centripetal acceleration: GMmr2=mω2r=m(2πT)2r\frac{G M m}{r^2} = m \omega^2 r = m \left(\frac{2\pi}{T}\right)^2 r

    Solving for the orbital period squared T2T^2: T2=4π2r3GMT^2 = \frac{4\pi^2 r^3}{G M}

  2. Express the Mass in Terms of Density: The asteroid is a uniform sphere of radius RR and density ρ\rho. Its total mass is the product of its volume and density: M=43πR3ρM = \frac{4}{3}\pi R^3 \rho

    Substitute MM into the expression for T2T^2: T2=4π2r3G(43πR3ρ)=3πr3GρR3T^2 = \frac{4\pi^2 r^3}{G \left(\frac{4}{3}\pi R^3 \rho\right)} = \frac{3\pi r^3}{G \rho R^3}

  3. Take the Grazing Orbit Limit (h→0h \to 0): As the orbital altitude approaches zero, the orbital radius approaches the asteroid's surface radius, r→Rr \to R. The factor r3/R3r^3 / R^3 becomes 11: Tlimit2=3πGρT_{\text{limit}}^2 = \frac{3\pi}{G \rho}

    Taking the square root yields: Tlimit=3πGρT_{\text{limit}} = \sqrt{\frac{3\pi}{G\rho}}

    (Notice that the radius RR cancels out completely: the period of a grazing orbit around any uniform sphere depends solely on its density ρ\rho, regardless of how large or small the sphere is.)


Part (b): Numerical Computation

  1. Calculate the Limiting Orbital Period TlimitT_{\text{limit}}: Substitute G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2 and ρ=3.20×103 kg/m3\rho = 3.20 \times 10^3\text{ kg/m}^3: Gρ=(6.674×10−11 N⋅m2/kg2)(3.20×103 kg/m3)=2.13568×10−7 s−2G\rho = (6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)(3.20 \times 10^3\text{ kg/m}^3) = 2.13568 \times 10^{-7}\text{ s}^{-2}

    Tlimit=3π2.13568×10−7 s−2≈4.4130×107 s2≈6.64×103 sT_{\text{limit}} = \sqrt{\frac{3\pi}{2.13568 \times 10^{-7}\text{ s}^{-2}}} \approx \sqrt{4.4130 \times 10^7\text{ s}^2} \approx 6.64 \times 10^3\text{ s}

    Converting to hours: Tlimit=6643 s3600 s/h≈1.84 hT_{\text{limit}} = \frac{6643\text{ s}}{3600\text{ s/h}} \approx 1.84\text{ h}

  2. Calculate the Limiting Orbital Frequency flimitf_{\text{limit}}: The frequency is the inverse of the period: flimit=1Tlimit=16643 s≈1.51×10−4 Hzf_{\text{limit}} = \frac{1}{T_{\text{limit}}} = \frac{1}{6643\text{ s}} \approx 1.51 \times 10^{-4}\text{ Hz}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to take the square root when solving for the orbital period T from Kepler's third law.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    G⋅M/R2=(2πT)2⋅R  ⟹  T2=4π2⋅R3G⋅MG \cdot M / R^2 = \left(\frac{2\pi}{T}\right)^2 \cdot R \implies T^2 = \frac{4\pi^2 \cdot R^3}{G \cdot M}

  2. Step 2

    M=43⋅π⋅R3⋅ρ  ⟹  T=3πG⋅ρM = \frac{4}{3} \cdot \pi \cdot R^3 \cdot \rho \implies T = \frac{3\pi}{G \cdot \rho}

    Correct

    Tlimit=3πGρT_{\text{limit}} = \sqrt{\frac{3\pi}{G\rho}}

    When you substituted the sphere mass M=43πR3ρM = \frac{4}{3}\pi R^3 \rho into Kepler's third law, the left-hand side was T2T^2, not TT. You omitted the square root when writing the final formula for TT.

  3. Step 3

    Tlimit=3π6.674×10−11⋅3.20×103  ⟹  Tlimit=4.41×107 sT_{\text{limit}} = \frac{3\pi}{6.674 \times 10^{-11} \cdot 3.20 \times 10^3} \implies T_{\text{limit}} = 4.41 \times 10^7\text{ s}

    Correct

    Tlimit=3πGρ≈6.64×103 sT_{\text{limit}} = \sqrt{\frac{3\pi}{G\rho}} \approx 6.64 \times 10^3\text{ s}

    You evaluated your formula accurately, but because the formula was missing the square root, the calculated period is equal to T2T^2 rather than TT.

  4. Step 4

    flimit=1Tlimit=2.27×10−8 Hzf_{\text{limit}} = \frac{1}{T_{\text{limit}}} = 2.27 \times 10^{-8}\text{ Hz}

    Correct

    flimit=1Tlimit≈1.51×10−4 Hzf_{\text{limit}} = \frac{1}{T_{\text{limit}}} \approx 1.51 \times 10^{-4}\text{ Hz}

    You correctly used the relationship f=1/Tf = 1/T, but the numerical value was skewed by the incorrect value of TlimitT_{\text{limit}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly formulated Newton's law of universal gravitation as the centripetal force.

You successfully related total mass to uniform density using the volume of a sphere.

You correctly identified the inverse relationship between orbital period and orbital frequency.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing square root

When simplifying T2=3πGρT^2 = \frac{3\pi}{G\rho}, you dropped the exponent 22 on TT without applying a square root to the right-hand side.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating an isolated squared variable T2T^2 with the linear quantity TT during intermediate algebraic substitution.

REASONING PATH
Your ACEpath teacher’s suggested approach
Track Powers on Both Sides
  • If the working equation is T2=…T^2 = \dots, isolating TT requires taking the radical: T=…T = \sqrt{\dots}.

  • Always verify dimensional consistency or check powers before substituting numbers: [T]=s[T] = \text{s}, whereas 3πGρ\frac{3\pi}{G\rho} has units of s2\text{s}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write out the substitution explicitly: T2=4π2R3G(43πR3ρ)=3πGρT^2 = \frac{4\pi^2 R^3}{G \left(\frac{4}{3}\pi R^3 \rho\right)} = \frac{3\pi}{G\rho}.

  2. Take the square root of both sides: Tlimit=3πGρT_{\text{limit}} = \sqrt{\frac{3\pi}{G\rho}}.

  3. Substitute the numerical values: Tlimit=3π(6.674×10−11 N⋅m2/kg2)(3.20×103 kg/m3)≈6.64×103 sT_{\text{limit}} = \sqrt{\frac{3\pi}{(6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)(3.20 \times 10^3\text{ kg/m}^3)}} \approx 6.64 \times 10^3\text{ s}.

  4. Compute the frequency: flimit=16.64×103 s≈1.51×10−4 Hzf_{\text{limit}} = \frac{1}{6.64 \times 10^3\text{ s}} \approx 1.51 \times 10^{-4}\text{ Hz}.

Final answer

(a) Tlimit=3πGρT_{\text{limit}} = \sqrt{\frac{3\pi}{G\rho}}; (b) Tlimit≈6.64×103 sT_{\text{limit}} \approx 6.64 \times 10^3\text{ s}, flimit≈1.51×10−4 Hzf_{\text{limit}} \approx 1.51 \times 10^{-4}\text{ Hz}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a quick unit check: verify that your expression for period has units of seconds, not seconds squared.

  • Double-check each line when transitioning from Kepler's third law (T2∝r3T^2 \propto r^3) to the orbital period TT to ensure radicals are retained.

OverviewACEpath Teacher's Diagnosis

02 The student uses the surface area formula 4π*R² instead of the sphere volume formula (4/3)π*R³ when calculating mass from density.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    G⋅M⋅mR2=m⋅v2R  ⟹  v=G⋅MR  ⟹  T=2π⋅Rv=2π⋅R3G⋅M\frac{G \cdot M \cdot m}{R^2} = \frac{m \cdot v^2}{R} \implies v = \sqrt{\frac{G \cdot M}{R}} \implies T = 2\pi \cdot \frac{R}{v} = 2\pi \cdot \sqrt{\frac{R^3}{G \cdot M}}

  2. Step 2

    M=4π⋅R2⋅ρ  ⟹  T=2π⋅R4π⋅G⋅ρ=π⋅RG⋅ρM = 4\pi \cdot R^2 \cdot \rho \implies T = 2\pi \cdot \sqrt{\frac{R}{4\pi \cdot G \cdot \rho}} = \sqrt{\frac{\pi \cdot R}{G \cdot \rho}}

    Correct

    M=43πR3ρ  ⟹  Tlimit=2πR3G(43πR3ρ)=3πGρM = \frac{4}{3}\pi R^3 \rho \implies T_{\text{limit}} = 2\pi \sqrt{\frac{R^3}{G\left(\frac{4}{3}\pi R^3 \rho\right)}} = \sqrt{\frac{3\pi}{G\rho}}

    You wrote M=4πR2ρM = 4\pi R^2 \rho, which uses the surface area of a sphere rather than its volume. The mass of a uniform sphere is M=Vρ=43πR3ρM = V\rho = \frac{4}{3}\pi R^3 \rho. When using the correct volume, the factor R3R^3 cancels completely, leaving an expression that depends solely on GG and ρ\rho.

  3. Step 3

    Cannot compute numerical values because asteroid radius \text{Cannot compute numerical values because asteroid radius } R  is not given.\text{ is not given.}

    Correct

    Tlimit=3π(6.674×10−11)(3.20×103)≈6.64×103 sT_{\text{limit}} = \sqrt{\frac{3\pi}{(6.674 \times 10^{-11})(3.20 \times 10^3)}} \approx 6.64 \times 10^3\text{ s}, flimit=1Tlimit≈1.51×10−4 Hzf_{\text{limit}} = \frac{1}{T_{\text{limit}}} \approx 1.51 \times 10^{-4}\text{ Hz}

    Because an un-cancelled factor of RR remained from your geometric formula error in step 2, you could not evaluate the numerical values. Using the correct formula eliminates RR entirely.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly equated gravitational force with centripetal force to obtain Kepler's third-law relationship between period and orbital radius.

You correctly combined the orbital circumference and orbital velocity to express the period TT.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometric Formula Substitution Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the surface area of a sphere (4πR24\pi R^2) with the volume of a sphere (43πR3\frac{4}{3}\pi R^3) when converting uniform density to mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Volume vs. Area in Mass Calculations
  • For a three-dimensional object of uniform volumetric mass density ρ\rho, mass equals volume times density: M=Vρ=43πR3ρM = V\rho = \frac{4}{3}\pi R^3 \rho.

  • Check dimensions before substituting: density in kg/m3\text{kg/m}^3 must be multiplied by cubic units (extm3 ext{m}^3), not square units (extm2 ext{m}^2).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute M=43πR3ρM = \frac{4}{3}\pi R^3 \rho into T=2πR3GMT = 2\pi \sqrt{\frac{R^3}{G M}}: Tlimit=2πR3G(43πR3ρ)=3πGρT_{\text{limit}} = 2\pi \sqrt{\frac{R^3}{G \left(\frac{4}{3}\pi R^3 \rho\right)}} = \sqrt{\frac{3\pi}{G\rho}}

  2. Calculate the limiting period: Tlimit=3π(6.674×10−11 N⋅m2/kg2)(3.20×103 kg/m3)≈6.64×103 s≈1.84 hT_{\text{limit}} = \sqrt{\frac{3\pi}{(6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)(3.20 \times 10^3\text{ kg/m}^3)}} \approx 6.64 \times 10^3\text{ s} \approx 1.84\text{ h}

  3. Calculate the limiting frequency: flimit=1Tlimit=16.643×103 s≈1.51×10−4 Hzf_{\text{limit}} = \frac{1}{T_{\text{limit}}} = \frac{1}{6.643 \times 10^3\text{ s}} \approx 1.51 \times 10^{-4}\text{ Hz}

Final answer

(a) Tlimit=3πGρT_{\text{limit}} = \sqrt{\frac{3\pi}{G\rho}}; (b) Tlimit=6.64×103 sT_{\text{limit}} = 6.64 \times 10^3\text{ s} (1.84 h1.84\text{ h}), flimit=1.51×10−4 Hzf_{\text{limit}} = 1.51 \times 10^{-4}\text{ Hz}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric formulas for spheres to make sure you use volume V=43πR3V = \frac{4}{3}\pi R^3 for volumetric mass density.

  • Notice the physical insight: for any grazing orbit around a uniform sphere, the period depends only on density ρ\rho, not on the size of the body.

OverviewACEpath Teacher's Diagnosis

03 The student confuses orbital frequency f with angular frequency ω, reporting f = 2π/T instead of 1/T.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    GM/R2=ω2R  ⟹  M=(43)πR3ρ  ⟹  ω=4πGρ3  ⟹  T=2πω=3πGρG M / R^2 = \omega^2 R \implies M = \left(\frac{4}{3}\right)\pi R^3 \rho \implies \omega = \sqrt{\frac{4\pi G \rho}{3}} \implies T = \frac{2\pi}{\omega} = \sqrt{\frac{3\pi}{G\rho}}

  2. Step 2

    Tlimit=3π6.674×10−11×3.20×103=6643 sT_{\text{limit}} = \sqrt{\frac{3\pi}{6.674\times 10^{-11} \times 3.20 \times 10^3}} = 6643\text{ s}

  3. Step 3

    flimit=2πTlimit=2π6643=9.46×10−4 Hzf_{\text{limit}} = \frac{2\pi}{T_{\text{limit}}} = \frac{2\pi}{6643} = 9.46 \times 10^{-4}\text{ Hz}

    Correct

    flimit=1Tlimit=16643 s≈1.51×10−4 Hzf_{\text{limit}} = \frac{1}{T_{\text{limit}}} = \frac{1}{6643\text{ s}} \approx 1.51 \times 10^{-4}\text{ Hz}

    You used the formula for angular frequency ω=2πT\omega = \frac{2\pi}{T} instead of ordinary orbital frequency f=1Tf = \frac{1}{T}.

WHAT YOU DID WELL
Compliments from Your Teacher

You set up the orbital dynamics equation correctly using gravitational force and centripetal acceleration.

You expressed the mass of the asteroid properly as volume times uniform density.

You simplified the grazing orbit limit algebraically to eliminate the radius RR.

You computed the orbital period Tlimit=6643 sT_{\text{limit}} = 6643\text{ s} accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing cyclic frequency with angular frequency

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated ordinary cyclic frequency ff (measured in revolutions per second or Hz\text{Hz}, where f=1/Tf = 1/T) with angular frequency ω\omega (measured in radians per second, where ω=2π/T\omega = 2\pi/T).

REASONING PATH
Your ACEpath teacher’s suggested approach
Frequency vs. Angular Frequency
  • Orbital (cyclic) frequency is f=1Tf = \frac{1}{T} (units: Hz\text{Hz} or s−1\text{s}^{-1}). Angular frequency is ω=2πf=2πT\omega = 2\pi f = \frac{2\pi}{T} (units: rad/s\text{rad/s}).

  • When asked for orbital frequency ff in Hz\text{Hz}, take the simple reciprocal of the period: f=1Tf = \frac{1}{T}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the definition of cyclic frequency: flimit=1Tlimitf_{\text{limit}} = \frac{1}{T_{\text{limit}}}.

  2. Substitute Tlimit=6643 sT_{\text{limit}} = 6643\text{ s}: flimit=16643 s≈1.51×10−4 Hzf_{\text{limit}} = \frac{1}{6643\text{ s}} \approx 1.51 \times 10^{-4}\text{ Hz}.

Final answer

Tlimit=6.64×103 sT_{\text{limit}} = 6.64 \times 10^3\text{ s} (1.84 h1.84\text{ h}), flimit=1.51×10−4 Hzf_{\text{limit}} = 1.51 \times 10^{-4}\text{ Hz}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between angular frequency ω\omega (radians per second) and ordinary frequency ff (cycles per second or hertz).

  • Always check units: hertz represents full cycles per second, meaning 11 cycle divided by the time TT of one cycle.

Lock it in

Similar question

01

A hypothetical rocky planet has a uniform density of ρ=5.50×103 kg/m3\rho = 5.50 \times 10^3\text{ kg/m}^3. Calculate the orbital period TT in minutes for a satellite skimming just above its surface. (G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2).

Answer

T≈84.5 minT \approx 84.5\text{ min}.

  1. Use T=3πGρT = \sqrt{\frac{3\pi}{G\rho}}.
  2. Compute Gρ=(6.674×10−11)(5500)=3.6707×10−7 s−2G\rho = (6.674 \times 10^{-11})(5500) = 3.6707 \times 10^{-7}\text{ s}^{-2}.
  3. T=3π3.6707×10−7≈5067 sT = \sqrt{\frac{3\pi}{3.6707 \times 10^{-7}}} \approx 5067\text{ s}.
  4. Divide by 60 s/min60\text{ s/min}: T≈84.5 minT \approx 84.5\text{ min}.
02

Two uniform spherical asteroids, Asteroid A and Asteroid B, have the same average density ρ\rho, but Asteroid B has twice the radius of Asteroid A (RB=2RAR_B = 2R_A). Find the ratio of their surface orbital periods TB/TAT_B / T_A.

Answer

TB/TA=1T_B / T_A = 1.

  1. For any uniform sphere in a grazing orbit, T=3πGρT = \sqrt{\frac{3\pi}{G\rho}}.
  2. The period is completely independent of the radius RR of the sphere because both gravitational mass and orbital radius scale together (M∝R3M \propto R^3, r3∝R3r^3 \propto R^3, cancelling out).
  3. Since ρA=ρB\rho_A = \rho_B, TA=TBT_A = T_B.
03

A satellite completes a surface grazing orbit around an unknown spherical moon in T=7200 sT = 7200\text{ s}. Assuming the moon is a uniform sphere, calculate its mass density ρ\rho. (G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2).

Answer

ρ≈2.72×103 kg/m3\rho \approx 2.72 \times 10^3\text{ kg/m}^3.

  1. Start from T=3πGρT = \sqrt{\frac{3\pi}{G\rho}} and square both sides: T2=3πGρT^2 = \frac{3\pi}{G\rho}.
  2. Rearrange for density: ρ=3πGT2\rho = \frac{3\pi}{G T^2}.
  3. Substitute values: ρ=3π(6.674×10−11)(7200)2=9.42483.4599×10−3≈2.72×103 kg/m3\rho = \frac{3\pi}{(6.674 \times 10^{-11})(7200)^2} = \frac{9.4248}{3.4599 \times 10^{-3}} \approx 2.72 \times 10^3\text{ kg/m}^3.
Loading workspace…