Resources

A specialized laboratory test specimen of mass m=450 gm = 450\text{ g} is placed on a test track inclined at an angle of θ=25.0∘\theta = 25.0^\circ to the horizontal. An internal coiled micrometric spring exerts an elastic restoring force of Fspring=2.80×105 dynesF_{\text{spring}} = 2.80 \times 10^5\text{ dynes} directed up along the incline. The static frictional force between the track and the specimen has an upper limit characterized by μs=0.380\mu_s = 0.380. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2: (a) Convert all input parameters into standard SI units (mm in kg\text{kg}, FspringF_{\text{spring}} in N\text{N}). (b) Identify every force acting on the specimen along the direction perpendicular to the incline and along the direction parallel to the incline. (c) Calculate the magnitude of the normal force FNF_N and determine the magnitude and direction of the static frictional force fsf_s acting on the specimen.

Answer and steps

Final answer

(a) m=0.450 kgm = 0.450\text{ kg}, Fspring=2.80 NF_{\text{spring}} = 2.80\text{ N}. (b) Perpendicular to incline: Normal force F⃗N\vec{F}_N (directed outward perpendicular to incline) and perpendicular gravitational component F⃗g,⊥\vec{F}_{g,\perp} (into incline). Parallel to incline: Parallel gravitational component F⃗g,∥\vec{F}_{g,\parallel} (down incline), Elastic spring force F⃗spring\vec{F}_{\text{spring}} (up incline), and Static frictional force f⃗s\vec{f}_s (parallel to incline). (c) FN=4.00 NF_N = 4.00\text{ N}; fs=0.937 Nf_s = 0.937\text{ N} directed down the incline (since Fspring=2.80 N>Fg,∥=1.86 NF_{\text{spring}} = 2.80\text{ N} > F_{g,\parallel} = 1.86\text{ N}).

Steps

01

Magnitude of the Normal Force

Part (a): Unit Conversions to Standard SI Units

Convert the mass from grams (g\text{g}) to kilograms (kg\text{kg}) and the force from dynes (dyn\text{dyn}) to newtons (N\text{N}):

  1. Mass (mm): 1 kg=1000 g  ⟹  m=450 g1000 g/kg=0.450 kg1\text{ kg} = 1000\text{ g} \implies m = \frac{450\text{ g}}{1000\text{ g/kg}} = 0.450\text{ kg}
  2. Spring Force (FspringF_{\text{spring}}): 1 N=105 dyn  ⟹  Fspring=2.80×105 dyn105 dyn/N=2.80 N1\text{ N} = 10^5\text{ dyn} \implies F_{\text{spring}} = \frac{2.80 \times 10^5\text{ dyn}}{10^5\text{ dyn/N}} = 2.80\text{ N}

Part (b): Identification of Forces Acting on the Specimen

Set up a tilted coordinate system where the xx-axis is parallel to the inclined plane (positive uphill) and the yy-axis is perpendicular to the inclined plane (positive outward/away from the surface). The forces acting on the specimen are:

  • Gravity (F⃗g\vec{F}_g): Acts vertically downward with magnitude: Fg=mg=(0.450 kg)(9.80 m/s2)=4.41 NF_g = mg = (0.450\text{ kg})(9.80\text{ m/s}^2) = 4.41\text{ N} Resolving into components:
    • Perpendicular component: F⃗g,⊥\vec{F}_{g,\perp} of magnitude mgcos⁡θmg\cos\theta, directed into the incline.
    • Parallel component: F⃗g,∥\vec{F}_{g,\parallel} of magnitude mgsin⁡θmg\sin\theta, directed down the incline.
  • Perpendicular to the incline:
    • Normal force (F⃗N\vec{F}_N): Exerted by the track on the specimen, directed outward perpendicular to the incline.
    • Perpendicular gravity component (F⃗g,⊥\vec{F}_{g,\perp}): Directed inward perpendicular to the incline.
  • Parallel to the incline:
    • Spring force (F⃗spring\vec{F}_{\text{spring}}): Directed up the incline.
    • Parallel gravity component (F⃗g,∥\vec{F}_{g,\parallel}): Directed down the incline.
    • Static frictional force (f⃗s\vec{f}_s): Directed parallel to the incline to oppose impending motion.

Part (c): Normal Force and Static Frictional Force

Since there is no acceleration perpendicular to the incline (ΣFy=0\Sigma F_y = 0): FN−Fg,⊥=0  ⟹  FN=mgcos⁡θF_N - F_{g,\perp} = 0 \implies F_N = mg\cos\theta

Substitute the given values: FN=(4.41 N)cos⁡(25.0∘)=4.41⋅0.9063≈4.00 NF_N = (4.41\text{ N})\cos(25.0^\circ) = 4.41 \cdot 0.9063 \approx 4.00\text{ N}

02

Magnitude and Direction of Static Friction

First, evaluate the downhill component of gravity: Fg,∥=mgsin⁡θ=(4.41 N)sin⁡(25.0∘)=4.41⋅0.4226≈1.8637 NF_{g,\parallel} = mg\sin\theta = (4.41\text{ N})\sin(25.0^\circ) = 4.41 \cdot 0.4226 \approx 1.8637\text{ N}

Compare the forces along the incline without friction:

  • Upward pull from the spring: Fspring=2.80 NF_{\text{spring}} = 2.80\text{ N}
  • Downward pull from gravity: Fg,∥≈1.86 NF_{g,\parallel} \approx 1.86\text{ N}

Because Fspring>Fg,∥F_{\text{spring}} > F_{g,\parallel}, the spring tends to pull the specimen up the incline. Therefore, static friction must point down the incline to oppose this upward impending motion.

For static equilibrium along the incline (ΣFx=0\Sigma F_x = 0): Fspring−Fg,∥−fs=0F_{\text{spring}} - F_{g,\parallel} - f_s = 0 fs=Fspring−Fg,∥=2.80 N−1.8637 N≈0.937 Nf_s = F_{\text{spring}} - F_{g,\parallel} = 2.80\text{ N} - 1.8637\text{ N} \approx 0.937\text{ N}

03

Verification of Static Condition

Verify that the required static friction does not exceed the maximum possible static friction fs,max⁡f_{s,\max}: fs,max⁡=μsFN=0.380⋅3.997 N≈1.52 Nf_{s,\max} = \mu_s F_N = 0.380 \cdot 3.997\text{ N} \approx 1.52\text{ N}

Since fs=0.937 N≤1.52 Nf_s = 0.937\text{ N} \le 1.52\text{ N}, the specimen remains at rest, confirming that the static frictional force is 0.937 N0.937\text{ N} directed down the incline.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the maximum static friction f_s = μ_s F_N instead of determining the actual static friction required for equilibrium.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=450 g=0.450 kg  ⟹  Fspring=2.80×105 dynes=2.80 Nm = 450\text{ g} = 0.450\text{ kg} \implies F_{\text{spring}} = 2.80 \times 10^5\text{ dynes} = 2.80\text{ N}

  2. Step 2

    Perpendicular: normal force FNF_N and mgcos⁡θmg\cos\theta   ⟹  \implies Parallel: spring force FspringF_{\text{spring}}, gravity component mgsin⁡θmg\sin\theta, and friction fsf_s

  3. Step 3

    FN=mgcos⁡25.0∘=0.450×9.80×cos⁡25.0∘=4.00 N  ⟹  Fg,parallel=mgsin⁡25.0∘=0.450×9.80×sin⁡25.0∘=1.86 NF_N = mg\cos 25.0^\circ = 0.450 \times 9.80 \times \cos 25.0^\circ = 4.00\text{ N} \implies F_{g,\text{parallel}} = mg\sin 25.0^\circ = 0.450 \times 9.80 \times \sin 25.0^\circ = 1.86\text{ N}

  4. Step 4

    fs=μsFN=0.380×4.00 N=1.52 Nf_s = \mu_s F_N = 0.380 \times 4.00\text{ N} = 1.52\text{ N}

    Correct

    fs=Fspring−Fg,∥=2.80 N−1.864 N=0.937 Nf_s = F_{\text{spring}} - F_{g,\parallel} = 2.80\text{ N} - 1.864\text{ N} = 0.937\text{ N}

    Static friction is an adjustable force governed by the inequality fs≤μsFNf_s \le \mu_s F_N. The formula μsFN\mu_s F_N gives only the maximum static friction before slipping, not the actual friction needed to maintain equilibrium.

  5. Step 5

    Since Fspring=2.80 N>1.86 NF_{\text{spring}} = 2.80\text{ N} > 1.86\text{ N}, friction acts down the incline with magnitude 1.52 N1.52\text{ N}

    Correct

    Static friction has magnitude fs=0.937 Nf_s = 0.937\text{ N} directed down the incline.

    You correctly reasoned that friction points down the incline to oppose the net upward pull, but the magnitude is carried over from the incorrect formula in Step 4.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted both input parameters to SI units accurately.

You resolved gravity into correct parallel and perpendicular components.

You calculated the normal force correctly as FN=4.00 NF_N = 4.00\text{ N}.

You deduced the correct downhill direction for static friction by comparing FspringF_{\text{spring}} and Fg,∥F_{g,\parallel}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Static Friction Maximum Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the static friction inequality fs≤μsFNf_s \le \mu_s F_N as a fixed equality fs=μsFNf_s = \mu_s F_N. Static friction self-adjusts to match whatever net applied force is present up to its threshold; its actual value must be found from ΣF=0\Sigma F = 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Nature of Static Friction
  • fs≤fs,max⁡=μsFNf_s \le f_{s,\max} = \mu_s F_N

  • Always solve for fsf_s using Newton's first law ΣF=0\Sigma F = 0, then compare it against fs,max⁡f_{s,\max} to ensure the object does not slip.

Equilibrium Condition along Incline
  • ΣF∥=0  ⟹  Fspring−Fg,∥−fs=0\Sigma F_{\parallel} = 0 \implies F_{\text{spring}} - F_{g,\parallel} - f_s = 0

  • Sum the forces along the plane to find the exact value needed to keep acceleration zero: fs=2.80 N−1.864 N=0.937 Nf_s = 2.80\text{ N} - 1.864\text{ N} = 0.937\text{ N}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the force required for static equilibrium along the incline: ΣFx=0  ⟹  Fspring−Fg,∥−fs=0\Sigma F_x = 0 \implies F_{\text{spring}} - F_{g,\parallel} - f_s = 0.

  2. Solve for the required static friction: fs=Fspring−Fg,∥=2.80 N−1.8637 N=0.9363 N≈0.937 Nf_s = F_{\text{spring}} - F_{g,\parallel} = 2.80\text{ N} - 1.8637\text{ N} = 0.9363\text{ N} \approx 0.937\text{ N}.

  3. Check the slipping threshold: fs,max⁡=μsFN=0.380×3.997 N≈1.52 Nf_{s,\max} = \mu_s F_N = 0.380 \times 3.997\text{ N} \approx 1.52\text{ N}. Since 0.937 N≤1.52 N0.937\text{ N} \le 1.52\text{ N}, the specimen remains at rest.

Final answer

(c) FN=4.00 NF_N = 4.00\text{ N}; fs=0.937 Nf_s = 0.937\text{ N} directed down the incline.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the difference between the actual static friction fsf_s (from equilibrium) and the maximum threshold fs,max⁡=μsFNf_{s,\max} = \mu_s F_N.

  • Practice inclined plane equilibrium problems where the applied force exceeds the downhill component of gravity.

OverviewACEpath Teacher's Diagnosis

02 The student assumes static friction always opposes gravity by pointing up the incline without comparing the forces parallel to the incline.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=450 g=0.450 kg  ⟹  Fspring=2.80×105 dynes=2.80 Nm = 450\text{ g} = 0.450\text{ kg} \implies F_{\text{spring}} = 2.80 \times 10^5\text{ dynes} = 2.80\text{ N}

  2. Step 2

    Perpendicular: FNF_N and gravity component mgcos⁡θmg\cos\theta   ⟹  \implies Parallel: FspringF_{\text{spring}}, gravity component mgsin⁡θmg\sin\theta, and friction fsf_s

  3. Step 3

    FN=mgcos⁡25.0∘=0.450×9.80×cos⁡25.0∘=4.00 N  ⟹  Fg,∥=0.450×9.80×sin⁡25.0∘=1.86 NF_N = mg\cos 25.0^\circ = 0.450 \times 9.80 \times \cos 25.0^\circ = 4.00\text{ N} \implies F_{g,\parallel} = 0.450 \times 9.80 \times \sin 25.0^\circ = 1.86\text{ N}

  4. Step 4

    Friction always opposes the downward pull of gravity, so fsf_s points up the incline   ⟹  Fspring+fs=Fg,∥  ⟹  fs=1.86 N−2.80 N=−0.94 N\implies F_{\text{spring}} + f_s = F_{g,\parallel} \implies f_s = 1.86\text{ N} - 2.80\text{ N} = -0.94\text{ N}, so magnitude is 0.94 N0.94\text{ N} directed up the incline

    Correct

    Compare parallel forces: Fspring=2.80 N>Fg,∥=1.86 NF_{\text{spring}} = 2.80\text{ N} > F_{g,\parallel} = 1.86\text{ N}, meaning impending motion is up the incline. Therefore, static friction must oppose impending motion and point down the incline: Fspring−Fg,∥−fs=0  ⟹  fs=2.80 N−1.86 N=0.94 NF_{\text{spring}} - F_{g,\parallel} - f_s = 0 \implies f_s = 2.80\text{ N} - 1.86\text{ N} = 0.94\text{ N} directed down the incline.

    You assumed static friction always opposes gravity. In reality, static friction opposes the net tendency of motion (impending motion). Because the upward spring force (2.80 N2.80\text{ N}) is larger than the downward gravity component (1.86 N1.86\text{ N}), the object tends to slide up the incline, so static friction must point down the incline. The negative value you obtained (−0.94 N-0.94\text{ N}) was a mathematical signal that your assumed direction was opposite to the actual direction.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted all laboratory quantities into standard SI units.

You correctly identified every force component perpendicular and parallel to the track.

You calculated the correct numerical values for both the normal force and the parallel gravitational component.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Direction of Static Friction Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Assuming static friction always points uphill to counteract gravity, rather than comparing all external parallel forces to determine the direction of impending motion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Determine Impending Motion
  • Static friction opposes impending relative motion, not necessarily gravity or any single isolated force.

  • Compare the sum of non-frictional forces along the plane. The direction of static friction is opposite to the net non-frictional force along the surface.

Interpret Algebraic Signs
  • In an equilibrium equation, obtaining a negative force component indicates that the vector points opposite to your assumed direction.

  • If assuming an uphill friction gives fs<0f_s < 0, reverse the assumed direction to downhill and take the absolute value as the magnitude.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the non-frictional forces along the incline: Fspring=2.80 NF_{\text{spring}} = 2.80\text{ N} (upward) and Fg,∥=mgsin⁡25.0∘≈1.864 NF_{g,\parallel} = mg\sin 25.0^\circ \approx 1.864\text{ N} (downward).

  2. Because Fspring>Fg,∥F_{\text{spring}} > F_{g,\parallel}, the net non-frictional force is directed up the incline, meaning impending motion is upward.

  3. Static friction opposes impending motion, so f⃗s\vec{f}_s points down the incline.

  4. Set up static equilibrium along the incline: Fspring−Fg,∥−fs=0  ⟹  fs=2.80 N−1.864 N≈0.937 NF_{\text{spring}} - F_{g,\parallel} - f_s = 0 \implies f_s = 2.80\text{ N} - 1.864\text{ N} \approx 0.937\text{ N}.

Final answer

FN=4.00 NF_N = 4.00\text{ N}; fs=0.937 Nf_s = 0.937\text{ N} directed down the incline

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sum all non-frictional forces along the incline first to find the direction of impending motion before assigning a direction to static friction.

  • Verify that the required static friction does not exceed fs,max⁡=μsFNf_{s,\max} = \mu_s F_N.

OverviewACEpath Teacher's Diagnosis

03 The student swaps sine and cosine when resolving gravity into components perpendicular and parallel to the incline.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=450 g=0.450 kg  ⟹  Fspring=2.80×105 dynes=2.80 Nm = 450\text{ g} = 0.450\text{ kg} \implies F_{\text{spring}} = 2.80 \times 10^5\text{ dynes} = 2.80\text{ N}

  2. Step 2

    Perpendicular: FN and mgsin⁡θ  ⟹  Parallel: Fspring,mgcos⁡θ, and fs\text{Perpendicular: } F_N \text{ and } mg\sin\theta \implies \text{Parallel: } F_{\text{spring}}, mg\cos\theta, \text{ and } f_s

    Correct

    Perpendicular: FN and Fg,⊥=mgcos⁡θ  ⟹  Parallel: Fspring,Fg,∥=mgsin⁡θ, and fs\text{Perpendicular: } F_N \text{ and } F_{g,\perp} = mg\cos\theta \implies \text{Parallel: } F_{\text{spring}}, F_{g,\parallel} = mg\sin\theta, \text{ and } f_s

    You swapped sine and cosine when resolving gravity. The angle θ=25.0∘\theta = 25.0^\circ is measured from the horizontal, which makes the angle between the downward vertical and the perpendicular axis equal to θ\theta. Therefore, the perpendicular component is adjacent to the angle (mgcos⁡θmg\cos\theta) and the downhill component is opposite the angle (mgsin⁡θmg\sin\theta).

  3. Step 3

    FN=mgsin⁡25.0∘=0.450×9.80×sin⁡25.0∘=1.86 NF_N = mg\sin 25.0^\circ = 0.450 \times 9.80 \times \sin 25.0^\circ = 1.86\text{ N}

    Correct

    FN=mgcos⁡25.0∘=0.450×9.80×cos⁡25.0∘≈4.00 NF_N = mg\cos 25.0^\circ = 0.450 \times 9.80 \times \cos 25.0^\circ \approx 4.00\text{ N}

    Your calculation followed directly from your perpendicular component expression, but using sin⁡θ\sin\theta instead of cos⁡θ\cos\theta yielded 1.86 N1.86\text{ N} instead of 4.00 N4.00\text{ N}.

  4. Step 4

    Fg,∥=4.00 N down,Fspring=2.80 N up  ⟹  fs=4.00 N−2.80 N=1.20 N up the inclineF_{g,\parallel} = 4.00\text{ N} \text{ down}, F_{\text{spring}} = 2.80\text{ N} \text{ up} \implies f_s = 4.00\text{ N} - 2.80\text{ N} = 1.20\text{ N} \text{ up the incline}

    Correct

    Fg,∥=mgsin⁡25.0∘≈1.86 N  ⟹  fs=2.80 N−1.86 N=0.94 N down the inclineF_{g,\parallel} = mg\sin 25.0^\circ \approx 1.86\text{ N} \implies f_s = 2.80\text{ N} - 1.86\text{ N} = 0.94\text{ N} \text{ down the incline}

    Because your calculated parallel gravity component (4.00 N4.00\text{ N}) exceeded the spring force (2.80 N2.80\text{ N}), you deduced that friction points upward. With the correct value (Fg,∥≈1.86 NF_{g,\parallel} \approx 1.86\text{ N}), the spring force pulls harder uphill than gravity pulls downhill, so static friction must act down the incline with magnitude 0.94 N0.94\text{ N}.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted all given quantities into standard SI units correctly.

You identified all relevant forces acting on the specimen along both axes.

You correctly reasoned that static friction opposes the net impending motion along the incline.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Swap on Inclined Plane

You assigned sin⁡θ\sin\theta to the normal/perpendicular direction and cos⁡θ\cos\theta to the parallel direction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely memorized standard horizontal-surface coordinate conventions where vertical components use sine, rather than constructing the right triangle on the incline where θ\theta is between the gravity vector and the perpendicular axis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Incline Coordinate Decomposition
  • For an incline tilted at angle θ\theta from the horizontal, the perpendicular component of gravity is Fg,⊥=mgcos⁡θF_{g,\perp} = mg\cos\theta and the parallel component is Fg,∥=mgsin⁡θF_{g,\parallel} = mg\sin\theta.

  • Draw the gravity vector pointing straight down, then sketch the right triangle with legs perpendicular and parallel to the incline. Confirm that the angle adjacent to the perpendicular axis is θ\theta.

Extreme Angle Sanity Check
  • As the incline angle approaches zero (flat surface), the normal force must equal mgmg and the sliding tendency down the incline must vanish.

  • Test θ→0∘\theta \to 0^\circ: verify that cos⁡(0∘)=1\cos(0^\circ) = 1 gives FN=mgF_N = mg and sin⁡(0∘)=0\sin(0^\circ) = 0 gives Fg,∥=0F_{g,\parallel} = 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the perpendicular force balance: FN=mgcos⁡25.0∘=(0.450 kg)(9.80 m/s2)cos⁡25.0∘=4.00 NF_N = mg\cos 25.0^\circ = (0.450\text{ kg})(9.80\text{ m/s}^2)\cos 25.0^\circ = 4.00\text{ N}.

  2. Recalculate the parallel gravity component: Fg,∥=mgsin⁡25.0∘=(0.450 kg)(9.80 m/s2)sin⁡25.0∘≈1.86 NF_{g,\parallel} = mg\sin 25.0^\circ = (0.450\text{ kg})(9.80\text{ m/s}^2)\sin 25.0^\circ \approx 1.86\text{ N}.

  3. Compare forces along the incline without friction: Fspring=2.80 NF_{\text{spring}} = 2.80\text{ N} (up) and Fg,∥=1.86 NF_{g,\parallel} = 1.86\text{ N} (down). Since Fspring>Fg,∥F_{\text{spring}} > F_{g,\parallel}, impending motion is up the incline.

  4. Apply equilibrium along the incline: Fspring−Fg,∥−fs=0  ⟹  fs=2.80 N−1.86 N=0.94 NF_{\text{spring}} - F_{g,\parallel} - f_s = 0 \implies f_s = 2.80\text{ N} - 1.86\text{ N} = 0.94\text{ N} directed down the incline.

Final answer

FN=4.00 NF_N = 4.00\text{ N}; fs=0.94 Nf_s = 0.94\text{ N} directed down the incline.

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a dedicated free-body diagram showing the right triangle for F⃗g\vec{F}_g whenever an inclined plane is involved.

  • Use the θ→0∘\theta \to 0^\circ boundary check before carrying numerical values into subsequent calculations.

Lock it in

Similar question

01

A block of mass m=2.0 kgm = 2.0\text{ kg} rests on a horizontal table with μs=0.50\mu_s = 0.50. A horizontal pulling force of F=6.0 NF = 6.0\text{ N} is applied to the right. Taking g=9.8 m/s2g = 9.8\text{ m/s}^2, find the magnitude and direction of the static frictional force.

Answer

FN=mg=19.6 NF_N = mg = 19.6\text{ N}. Maximum static friction is fs,max⁡=0.50×19.6 N=9.8 Nf_{s,\max} = 0.50 \times 19.6\text{ N} = 9.8\text{ N}. Since F=6.0 N≤9.8 NF = 6.0\text{ N} \le 9.8\text{ N}, the block is stationary. By ΣFx=0\Sigma F_x = 0, fs=6.0 Nf_s = 6.0\text{ N} directed to the left.

02

A crate of mass m=5.0 kgm = 5.0\text{ kg} rests on a 30∘30^\circ incline where μs=0.60\mu_s = 0.60. No external pulling force is applied. Taking g=9.8 m/s2g = 9.8\text{ m/s}^2, calculate the normal force and the static friction force acting on the crate.

Answer

FN=mgcos⁡30∘=(5.0)(9.8)(0.866)≈42.4 NF_N = mg\cos 30^\circ = (5.0)(9.8)(0.866) \approx 42.4\text{ N}. The downhill gravity component is Fg,∥=mgsin⁡30∘=(5.0)(9.8)(0.5)=24.5 NF_{g,\parallel} = mg\sin 30^\circ = (5.0)(9.8)(0.5) = 24.5\text{ N}. Maximum friction is fs,max⁡=0.60×42.43 N≈25.5 Nf_{s,\max} = 0.60 \times 42.43\text{ N} \approx 25.5\text{ N}. Since 24.5 N≤25.5 N24.5\text{ N} \le 25.5\text{ N}, the crate does not slip, so fs=24.5 Nf_s = 24.5\text{ N} directed up the incline.

03

A 3.0 kg3.0\text{ kg} box rests on a 20∘20^\circ incline with μs=0.40\mu_s = 0.40. An external rope pulls the box parallel to the incline with a force of T=20.0 NT = 20.0\text{ N} up the plane. Taking g=9.8 m/s2g = 9.8\text{ m/s}^2, determine whether the box remains at rest and find the magnitude and direction of the friction force.

Answer

FN=mgcos⁡20∘=(3.0)(9.8)(0.9397)≈27.6 NF_N = mg\cos 20^\circ = (3.0)(9.8)(0.9397) \approx 27.6\text{ N}. fs,max⁡=0.40×27.63 N≈11.1 Nf_{s,\max} = 0.40 \times 27.63\text{ N} \approx 11.1\text{ N}. Downhill gravity is Fg,∥=mgsin⁡20∘=(3.0)(9.8)(0.3420)≈10.1 NF_{g,\parallel} = mg\sin 20^\circ = (3.0)(9.8)(0.3420) \approx 10.1\text{ N}. Net force without friction is T−Fg,∥=20.0 N−10.1 N=9.9 NT - F_{g,\parallel} = 20.0\text{ N} - 10.1\text{ N} = 9.9\text{ N} directed uphill. Required friction is fs=9.9 Nf_s = 9.9\text{ N} directed down the incline. Since 9.9 N≤11.1 N9.9\text{ N} \le 11.1\text{ N}, the box stays at rest with fs=9.9 Nf_s = 9.9\text{ N} pointing down the incline.

Loading workspace…