Resources

In a physical chemistry laboratory experiment, students determine the latent heat of vaporization ΔHvap\Delta H_{\text{vap}} of an unknown pure liquid using a sealed boiling apparatus connected to an electronic pressure transducer. The recorded equilibrium vapor pressure data yields P1=1.33×104 PaP_1 = 1.33 \times 10^4\text{ Pa} at T1=320.0 KT_1 = 320.0\text{ K} and P2=1.013×105 PaP_2 = 1.013 \times 10^5\text{ Pa} at the normal boiling point T2=373.2 KT_2 = 373.2\text{ K}. (a) Using the integrated Clausius-Clapeyron equation ln⁡(P2P1)=−ΔHvapR(1T2−1T1)\ln\left(\frac{P_2}{P_1}\right) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right) where R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}, calculate the molar enthalpy of vaporization ΔHvap\Delta H_{\text{vap}} in kJ/mol\text{kJ/mol}. (b) From a microscopic particle perspective, calculate the average energy required per molecule (in joules, J\text{J}) to break it free from the cohesive potential well of the liquid phase into the non-interacting gaseous state (using NA=6.022×1023 molecules/molN_A = 6.022 \times 10^{23}\text{ molecules/mol}).

Answer and steps

Final answer

(a) ΔHvap=3.80×104 J/mol=38.0 kJ/mol\Delta H_{\text{vap}} = 3.80 \times 10^4\text{ J/mol} = 38.0\text{ kJ/mol}; (b) Eper molecule=ΔHvapNA=6.31×10−20 JE_{\text{per molecule}} = \frac{\Delta H_{\text{vap}}}{N_A} = 6.31 \times 10^{-20}\text{ J}.

Steps

Part (a): Determining the Molar Enthalpy of Vaporization (ΔHvap\Delta H_{\text{vap}})

  1. State the governing relation:
    The integrated Clausius-Clapeyron equation relates the saturation vapor pressure of a liquid at two temperatures to its molar enthalpy of vaporization: ln⁡(P2P1)=−ΔHvapR(1T2−1T1)=ΔHvapR(1T1−1T2)\ln\left(\frac{P_2}{P_1}\right) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)
  2. Rearrange to solve for ΔHvap\Delta H_{\text{vap}}: ΔHvap=R⋅ln⁡(P2P1)1T1−1T2\Delta H_{\text{vap}} = \frac{R \cdot \ln\left(\frac{P_2}{P_1}\right)}{\frac{1}{T_1} - \frac{1}{T_2}}
  3. Substitute the given experimental values:

    • P1=1.33×104 PaP_1 = 1.33 \times 10^4\text{ Pa} at T1=320.0 KT_1 = 320.0\text{ K}
    • P2=1.013×105 PaP_2 = 1.013 \times 10^5\text{ Pa} at T2=373.2 KT_2 = 373.2\text{ K}
    • R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}

    First, calculate the pressure ratio and its natural logarithm: P2P1=1.013×105 Pa1.33×104 Pa≈7.6165\frac{P_2}{P_1} = \frac{1.013 \times 10^5\text{ Pa}}{1.33 \times 10^4\text{ Pa}} \approx 7.6165 ln⁡(P2P1)=ln⁡(7.6165)≈2.0303\ln\left(\frac{P_2}{P_1}\right) = \ln(7.6165) \approx 2.0303

    Next, calculate the difference in reciprocal temperatures: 1T1−1T2=1320.0 K−1373.2 K≈3.1250×10−3 K−1−2.6795×10−3 K−1=4.455×10−4 K−1\frac{1}{T_1} - \frac{1}{T_2} = \frac{1}{320.0\text{ K}} - \frac{1}{373.2\text{ K}} \approx 3.1250 \times 10^{-3}\text{ K}^{-1} - 2.6795 \times 10^{-3}\text{ K}^{-1} = 4.455 \times 10^{-4}\text{ K}^{-1}

    Now, compute ΔHvap\Delta H_{\text{vap}}: ΔHvap=8.314 J/(mol⋅K)⋅2.03034.455×10−4 K−1≈3.79×104 J/mol≈3.80×104 J/mol\Delta H_{\text{vap}} = \frac{8.314\text{ J/(mol}\cdot\text{K)} \cdot 2.0303}{4.455 \times 10^{-4}\text{ K}^{-1}} \approx 3.79 \times 10^4\text{ J/mol} \approx 3.80 \times 10^4\text{ J/mol}

    Converting to kJ/mol\text{kJ/mol}: ΔHvap=38.0 kJ/mol\Delta H_{\text{vap}} = 38.0\text{ kJ/mol}

(Common Pitfall: Ensure the negative sign is properly accounted for when grouping (1T2−1T1)\left(\frac{1}{T_2} - \frac{1}{T_1}\right), and keep temperatures strictly in kelvins rather than degrees Celsius).


Part (b): Microscopic Energy per Molecule

  1. Relate macroscopic enthalpy to the molecular scale:
    The molar enthalpy of vaporization represents the energy needed to transition one mole of particles from the closely bound liquid phase to the dispersed vapor phase. The microscopic cohesive binding energy per particle is obtained by dividing ΔHvap\Delta H_{\text{vap}} by Avogadro's constant (NAN_A): Eper molecule=ΔHvapNAE_{\text{per molecule}} = \frac{\Delta H_{\text{vap}}}{N_A}
  2. Substitute the numerical values: Eper molecule=3.80×104 J/mol6.022×1023 molecules/mol≈6.31×10−20 JE_{\text{per molecule}} = \frac{3.80 \times 10^4\text{ J/mol}}{6.022 \times 10^{23}\text{ molecules/mol}} \approx 6.31 \times 10^{-20}\text{ J}

This microscopic quantity represents the average work done against intermolecular attractive forces (such as dipole-dipole interactions or hydrogen bonding) to separate a single molecule completely from its neighbors in the bulk liquid.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the molar enthalpy of vaporization from J/mol to kJ/mol, leaving the final answer a factor of 1000 too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ln⁡(1.013×1051.33×104)=−ΔHvap8.314×(1373.2−1320.0)  ⟹  2.0303=−ΔHvap8.314×(−0.0004455)\ln\left(\frac{1.013 \times 10^5}{1.33 \times 10^4}\right) = \frac{-\Delta H_{\text{vap}}}{8.314} \times \left(\frac{1}{373.2} - \frac{1}{320.0}\right) \implies 2.0303 = \frac{-\Delta H_{\text{vap}}}{8.314} \times (-0.0004455)

  2. Step 2

    ΔHvap=37890 kJ/mol\Delta H_{\text{vap}} = 37890\text{ kJ/mol}

    Correct

    ΔHvap=37890 J/mol=37.9 kJ/mol\Delta H_{\text{vap}} = 37890\text{ J/mol} = 37.9\text{ kJ/mol}

    Because you used R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}, your raw algebraic result is in J/mol\text{J/mol}. To express the final answer in kJ/mol\text{kJ/mol} as requested, you need to divide by 10001000, giving 37.9 kJ/mol37.9\text{ kJ/mol} (or 38.0 kJ/mol38.0\text{ kJ/mol}).

  3. Step 3

    ε=ΔHvapNA\varepsilon = \frac{\Delta H_{\text{vap}}}{N_A}

  4. Step 4

    ε=378906.022×1023=6.29×10−20 J\varepsilon = \frac{37890}{6.022 \times 10^{23}} = 6.29 \times 10^{-20}\text{ J}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted all experimental parameters into the integrated Clausius-Clapeyron equation.

You handled the reciprocal temperatures and negative signs accurately.

You correctly connected macroscopic molar enthalpy to microscopic molecular separation energy using Avogadro's number.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omission (J to kJ)

You solved for ΔHvap\Delta H_{\text{vap}} using standard SI units but wrote kJ/mol\text{kJ/mol} instead of converting J/mol\text{J/mol} to kJ/mol\text{kJ/mol}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

The ideal gas constant R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} outputs enthalpy directly in J/mol\text{J/mol}. When a problem requests kJ/mol\text{kJ/mol}, an explicit conversion step (1 kJ=1000 J1\text{ kJ} = 1000\text{ J}) must be applied to the numerical value.

REASONING PATH
Your ACEpath teacher’s suggested approach
Track Gas Constant Units
  • Using R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} always yields thermodynamic energies in joules (J\text{J}), not kilojoules (kJ\text{kJ}).

  • Always write down the base unit J/mol\text{J/mol} first, then divide by 10001000 if the question specifies kJ/mol\text{kJ/mol}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ΔHvap=2.0303×8.314 J/(mol⋅K)0.0004455 K−1≈37890 J/mol\Delta H_{\text{vap}} = \frac{2.0303 \times 8.314\text{ J/(mol}\cdot\text{K)}}{0.0004455\text{ K}^{-1}} \approx 37890\text{ J/mol}

  2. ΔHvap=37890 J/mol1000 J/kJ≈37.9 kJ/mol\Delta H_{\text{vap}} = \frac{37890\text{ J/mol}}{1000\text{ J/kJ}} \approx 37.9\text{ kJ/mol}

Final answer

(a) ΔHvap=37.9 kJ/mol\Delta H_{\text{vap}} = 37.9\text{ kJ/mol} (or 38.0 kJ/mol38.0\text{ kJ/mol}); (b) Eper molecule=6.29×10−20 JE_{\text{per molecule}} = 6.29 \times 10^{-20}\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full unit alongside every intermediate calculation to prevent attaching metric prefixes without numerical conversion.

  • Practice converting between molar quantities (kJ/mol\text{kJ/mol}, J/mol\text{J/mol}) and molecular quantities (J/molecule\text{J/molecule}, eV/molecule\text{eV/molecule}).

OverviewACEpath Teacher's Diagnosis

02 The student substitutes the molar enthalpy in kJ/mol directly into the molecular energy formula without converting back to J/mol, underestimating the energy per molecule by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ln⁡(1.013×1051.33×104)=−ΔHvap8.314×(1373.2−1320.0)  ⟹  2.0303=−ΔHvap8.314×(−0.0004455)  ⟹  ΔHvap=37890 J/mol=37.9 kJ/mol\ln\left(\frac{1.013 \times 10^5}{1.33 \times 10^4}\right) = \frac{-\Delta H_{\text{vap}}}{8.314} \times \left(\frac{1}{373.2} - \frac{1}{320.0}\right) \implies 2.0303 = \frac{-\Delta H_{\text{vap}}}{8.314} \times (-0.0004455) \implies \Delta H_{\text{vap}} = 37890\text{ J/mol} = 37.9\text{ kJ/mol}

  2. Step 2

    ε=ΔHvapNA  ⟹  ε=37.96.022×1023=6.29×10−23 J\varepsilon = \frac{\Delta H_{\text{vap}}}{N_A} \implies \varepsilon = \frac{37.9}{6.022 \times 10^{23}} = 6.29 \times 10^{-23}\text{ J}

    Correct

    ε=3.79×104 J/mol6.022×1023 molecules/mol≈6.29×10−20 J\varepsilon = \frac{3.79 \times 10^4\text{ J/mol}}{6.022 \times 10^{23}\text{ molecules/mol}} \approx 6.29 \times 10^{-20}\text{ J}

    You substituted the numerical value 37.937.9 (which has units of kJ/mol\text{kJ/mol}) instead of converting to standard SI units (J/mol\text{J/mol}). Dividing 37.9 kJ/mol37.9\text{ kJ/mol} by NAN_A yields 6.29×10−23 kJ6.29 \times 10^{-23}\text{ kJ}, which equals 6.29×10−20 J6.29 \times 10^{-20}\text{ J}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the Clausius-Clapeyron equation to solve for the molar enthalpy of vaporization.

You handled the reciprocal temperature difference and natural logarithm evaluation accurately.

You identified the correct fundamental relation ε=ΔHvapNA\varepsilon = \frac{\Delta H_{\text{vap}}}{N_A} to link molar and microscopic energies.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error (kJ to J)

You used the value in kJ/mol\text{kJ/mol} instead of J/mol\text{J/mol} in the molecular energy formula while attaching the unit J\text{J} to the result.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the SI prefix kilo-\text{kilo-} when transferring the result from part (a) into part (b). Dividing an energy in kJ/mol\text{kJ/mol} by NAN_A gives kJ/molecule\text{kJ/molecule}, not J/molecule\text{J/molecule}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match units before substitution
  • When calculating a quantity requested in base SI units (such as joules, J\text{J}), all substituted molar energies must be expressed in J/mol\text{J/mol}, not kJ/mol\text{kJ/mol}.

  • Always convert values with prefixes back to base units: 37.9 kJ/mol=3.79×104 J/mol37.9\text{ kJ/mol} = 3.79 \times 10^4\text{ J/mol} before dividing by NAN_A.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the molar enthalpy from kJ/mol\text{kJ/mol} to base SI units: ΔHvap=37.9 kJ/mol=37890 J/mol\Delta H_{\text{vap}} = 37.9\text{ kJ/mol} = 37890\text{ J/mol}.

  2. Divide by Avogadro's number: ε=37890 J/mol6.022×1023 mol−1≈6.29×10−20 J\varepsilon = \frac{37890\text{ J/mol}}{6.022 \times 10^{23}\text{ mol}^{-1}} \approx 6.29 \times 10^{-20}\text{ J}.

Final answer

6.29×10−20 J6.29 \times 10^{-20}\text{ J} (or 6.31×10−20 J6.31 \times 10^{-20}\text{ J} using unrounded values)

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out explicit unit labels alongside numbers in your scratch work (e.g., kJ/molmol−1=kJ\frac{\text{kJ/mol}}{\text{mol}^{-1}} = \text{kJ}, then multiply by 10310^3 to get J\text{J}).

  • Perform a sanity check on molecular energies: typical molecular binding/separation energies in liquids range between 10−20 J10^{-20}\text{ J} and 10−19 J10^{-19}\text{ J} (0.1 to 1 eV0.1\text{ to }1\text{ eV}); a value of 10−23 J10^{-23}\text{ J} is unphysically small for a liquid boiling above room temperature.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the temperature difference as (T2 - T1) instead of using the reciprocal difference (1/T2 - 1/T1) in the integrated Clausius-Clapeyron equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ln⁡(P2P1)=−ΔHvapR×(T2−T1)  ⟹  2.0303=−ΔHvap8.314×(53.2)  ⟹  ΔHvap=−0.317 kJ/mol\ln\left(\frac{P_2}{P_1}\right) = -\frac{\Delta H_{\text{vap}}}{R} \times (T_2 - T_1) \implies 2.0303 = -\frac{\Delta H_{\text{vap}}}{8.314} \times (53.2) \implies \Delta H_{\text{vap}} = -0.317\text{ kJ/mol}

    Correct

    ln⁡(P2P1)=−ΔHvapR(1T2−1T1)  ⟹  ΔHvap=Rln⁡(P2/P1)1T1−1T2=38.0 kJ/mol\ln\left(\frac{P_2}{P_1}\right) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right) \implies \Delta H_{\text{vap}} = \frac{R\ln(P_2/P_1)}{\frac{1}{T_1} - \frac{1}{T_2}} = 38.0\text{ kJ/mol}

    You replaced the reciprocal temperature difference (1T2−1T1)\left(\frac{1}{T_2} - \frac{1}{T_1}\right) with a simple linear difference (T2−T1)(T_2 - T_1). Because the differential form of the Clausius-Clapeyron equation involves d(ln⁡P)dT=ΔHvapRT2\frac{d(\ln P)}{dT} = \frac{\Delta H_{\text{vap}}}{RT^2}, integrating with respect to TT produces −1T-\frac{1}{T}, not TT.

  2. Step 2

    ε=ΔHvapNA=−3176.022×1023=−5.26×10−22 J\varepsilon = \frac{\Delta H_{\text{vap}}}{N_A} = \frac{-317}{6.022 \times 10^{23}} = -5.26 \times 10^{-22}\text{ J}

    Correct

    ε=ΔHvapNA=3.80×104 J/mol6.022×1023 molecules/mol=6.31×10−20 J\varepsilon = \frac{\Delta H_{\text{vap}}}{N_A} = \frac{3.80 \times 10^4\text{ J/mol}}{6.022 \times 10^{23}\text{ molecules/mol}} = 6.31 \times 10^{-20}\text{ J}

    Your relationship between the molar vaporization enthalpy and the microscopic molecular binding energy ε=ΔHvapNA\varepsilon = \frac{\Delta H_{\text{vap}}}{N_A} is conceptually correct, but the numerical answer is affected by your error in ΔHvap\Delta H_{\text{vap}} from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the natural logarithm of the vapor pressure ratio ln⁡(P2P1)≈2.0303\ln\left(\frac{P_2}{P_1}\right) \approx 2.0303.

You correctly recognized that dividing molar enthalpy of vaporization by Avogadro's number gives the binding energy per molecule.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear vs. Reciprocal Temperature Form in Clausius-Clapeyron
WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the integrated form of the Clausius-Clapeyron equation with a linear temperature dependence (T2−T1)(T_2 - T_1). Because the integration of ∫T−2 dT\int T^{-2}\,dT yields −T−1-T^{-1}, the governing formula must contain the difference of reciprocal absolute temperatures, (1T2−1T1)\left(\frac{1}{T_2} - \frac{1}{T_1}\right). This mistake also resulted in an unphysical negative value for the enthalpy of vaporization.

REASONING PATH
Your ACEpath teacher’s suggested approach
Integration of the Clausius-Clapeyron Equation
  • d(ln⁡P)dT=ΔHvapRT2  ⟹  ∫P1P2d(ln⁡P)=ΔHvapR∫T1T2T−2 dT=−ΔHvapR(1T2−1T1)\frac{d(\ln P)}{dT} = \frac{\Delta H_{\text{vap}}}{RT^2} \implies \int_{P_1}^{P_2} d(\ln P) = \frac{\Delta H_{\text{vap}}}{R} \int_{T_1}^{T_2} T^{-2}\,dT = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right)

  • Always verify that the temperature factor contains reciprocal temperatures (1T2−1T1)\left(\frac{1}{T_2} - \frac{1}{T_1}\right), never a linear difference (T2−T1)(T_2 - T_1).

Physical Sanity Check on Enthalpy of Vaporization
  • Vaporization is an endothermic phase change, requiring ΔHvap>0\Delta H_{\text{vap}} > 0.

  • If your calculated ΔHvap\Delta H_{\text{vap}} is negative, check whether you flipped the sign or inverted the temperature terms.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the correct integrated Clausius-Clapeyron equation: ln⁡(P2P1)=ΔHvapR(1T1−1T2)\ln\left(\frac{P_2}{P_1}\right) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right).

  2. Calculate the reciprocal temperature difference: 1T1−1T2=1320.0 K−1373.2 K=3.1250×10−3−2.6795×10−3=4.455×10−4 K−1\frac{1}{T_1} - \frac{1}{T_2} = \frac{1}{320.0\text{ K}} - \frac{1}{373.2\text{ K}} = 3.1250 \times 10^{-3} - 2.6795 \times 10^{-3} = 4.455 \times 10^{-4}\text{ K}^{-1}.

  3. Solve for ΔHvap\Delta H_{\text{vap}}: ΔHvap=8.314×2.03034.455×10−4≈3.79×104 J/mol=38.0 kJ/mol\Delta H_{\text{vap}} = \frac{8.314 \times 2.0303}{4.455 \times 10^{-4}} \approx 3.79 \times 10^4\text{ J/mol} = 38.0\text{ kJ/mol}.

  4. Divide by Avogadro's number for Part (b): E=3.80×104 J/mol6.022×1023 mol−1=6.31×10−20 JE = \frac{3.80 \times 10^4\text{ J/mol}}{6.022 \times 10^{23}\text{ mol}^{-1}} = 6.31 \times 10^{-20}\text{ J}.

Final answer

(a) ΔHvap=38.0 kJ/mol\Delta H_{\text{vap}} = 38.0\text{ kJ/mol}; (b) Eper molecule=6.31×10−20 JE_{\text{per molecule}} = 6.31 \times 10^{-20}\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the temperature factor in the Clausius-Clapeyron equation as the difference of reciprocal kelvin temperatures: (1T1−1T2)\left(\frac{1}{T_1} - \frac{1}{T_2}\right).

  • Perform an endothermic sanity check after every vaporization calculation to confirm that ΔHvap\Delta H_{\text{vap}} is positive.

Lock it in

Similar question

01

A liquid has a molar enthalpy of vaporization of ΔHvap=28.5 kJ/mol\Delta H_{\text{vap}} = 28.5\text{ kJ/mol}. Calculate the energy required in joules (J\text{J}) to vaporize a single molecule. (Use NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1})

Answer

Eper molecule=4.73×10−20 JE_{\text{per molecule}} = 4.73 \times 10^{-20}\text{ J}. Key steps: Convert ΔHvap\Delta H_{\text{vap}} to base joules: 28.5 kJ/mol=28,500 J/mol28.5\text{ kJ/mol} = 28{,}500\text{ J/mol}. Divide by Avogadro's number: E=28,500 J/mol6.022×1023 mol−1≈4.73×10−20 JE = \frac{28{,}500\text{ J/mol}}{6.022 \times 10^{23}\text{ mol}^{-1}} \approx 4.73 \times 10^{-20}\text{ J}.

02

The vapor pressure of ethanol is 1.33×104 Pa1.33 \times 10^4\text{ Pa} at 308.0 K308.0\text{ K} and 5.33×104 Pa5.33 \times 10^4\text{ Pa} at 336.5 K336.5\text{ K}. Using the Clausius-Clapeyron equation with R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}, determine its molar enthalpy of vaporization in kJ/mol\text{kJ/mol}.

Answer

ΔHvap≈42.1 kJ/mol\Delta H_{\text{vap}} \approx 42.1\text{ kJ/mol}. Key steps: ln⁡(5.33/1.33)=ln⁡(4.0075)≈1.3882\ln(5.33/1.33) = \ln(4.0075) \approx 1.3882. Reciprocal temperature difference: 1308.0−1336.5≈3.2468×10−3−2.9718×10−3=2.750×10−4 K−1\frac{1}{308.0} - \frac{1}{336.5} \approx 3.2468 \times 10^{-3} - 2.9718 \times 10^{-3} = 2.750 \times 10^{-4}\text{ K}^{-1}. Compute ΔHvap=8.314×1.38822.750×10−4≈42,090 J/mol=42.1 kJ/mol\Delta H_{\text{vap}} = \frac{8.314 \times 1.3882}{2.750 \times 10^{-4}} \approx 42{,}090\text{ J/mol} = 42.1\text{ kJ/mol}.

03

An unknown substance has ΔHvap=31.0 kJ/mol\Delta H_{\text{vap}} = 31.0\text{ kJ/mol} and a normal boiling point of 350.0 K350.0\text{ K} (P=1.013×105 PaP = 1.013 \times 10^5\text{ Pa}). Find its vapor pressure at 300.0 K300.0\text{ K} in Pa\text{Pa}. (Use R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)})

Answer

P1≈1.70×104 PaP_1 \approx 1.70 \times 10^4\text{ Pa}. Key steps: Convert ΔHvap=31,000 J/mol\Delta H_{\text{vap}} = 31{,}000\text{ J/mol}. Compute exponent: −31,0008.314(1300.0−1350.0)=−3728.65×(4.762×10−4)≈−1.7755-\frac{31{,}000}{8.314}\left(\frac{1}{300.0} - \frac{1}{350.0}\right) = -3728.65 \times (4.762 \times 10^{-4}) \approx -1.7755. Then P1=P2⋅e−1.7755=1.013×105×0.1694≈1.70×104 PaP_1 = P_2 \cdot e^{-1.7755} = 1.013 \times 10^5 \times 0.1694 \approx 1.70 \times 10^4\text{ Pa}.

Loading workspace…