Resources
A stationary public address loudspeaker radiates sound waves spherically and uniformly into open air. A sound level meter positioned at a distance of from the speaker registers a sound level of . Assuming no reflection or energy dissipation into thermal modes, calculate the distance from the speaker at which the sound intensity level drops to .
Answer and steps
Final answer
Steps
Relate Sound Level to Sound Intensity
The sound intensity level (in decibels, ) is defined in terms of sound intensity and the reference intensity :
The difference in sound level between two positions is:
Apply the Inverse-Square Law for Spherical Waves
A source radiating power uniformly in all directions creates spherical wavefronts of surface area . Because energy is conserved and there is no absorption:
Therefore, sound intensity is inversely proportional to the square of the distance from the source:
Connect Sound Level Change Directly to Distance
Substitute the ratio of intensities into the decibel difference equation:
Common Pitfall: Forgetting to convert the exponent in the log term: . Using a factor of instead of when working directly with distance ratios is a frequent error.
Substitute Values and Solve for
Substitute , , and :
Divide both sides by :
Rewrite in exponential form:
Rounding to three significant figures gives:
Typical errors
01 The student forgets that intensity follows an inverse-square law with distance and instead assumes a linear inverse relationship between intensity and distance, leading to r₂ = 100 m.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You assumed intensity is inversely proportional to , but spherical sound waves spread over a sphere of surface area . Therefore, intensity obeys an inverse-square law: , which gives .
- Step 3Correct
Your calculation followed logically from your linear relationship, but because the inverse-square law applies, you need to take the square root of the intensity ratio to find the distance ratio.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly subtracted the two sound levels to find .
You correctly converted the decibel difference into an intensity ratio of .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this is a conceptual misconception regarding how wave power distributes over expanding spherical wavefronts.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou related sound intensity linearly to distance () instead of applying the geometric inverse-square law () for spherical waves radiating into open space.
REASONING PATH
Your ACEpath teacher’s suggested approach- Geometric Wavefront Expansion
For a point source radiating uniformly in 3D, wave power spreads over a spherical surface of area .
Always write , which means doubling distance quarters intensity.
- Decibel-to-Distance Form
.
When working directly between distance and decibels, use a multiplier of rather than to account for the squared radius.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the inverse-square law for spherical wave propagation: .
Take the square root of both sides: .
Multiply by the initial distance: .
02 The student inverts the distance ratio when applying the inverse-square law, using I₁ / I₂ = (r₁ / r₂)² instead of (r₂ / r₁)², which erroneously predicts a shorter distance of 0.798 m as intensity decreases.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because sound radiates uniformly over a sphere, intensity obeys an inverse-square relationship . Therefore, the ratio of intensities is inversely proportional to the ratio of squared distances: .
- Step 3Correct
Your algebraic manipulation was logically carried out from your prior step, but it inherited the inverted ratio and predicted a distance closer to the speaker () even though the sound level decreased.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the logarithmic decibel difference formula to find the intensity ratio.
You carried out the exponential conversion accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou matched the subscripts directly as as if intensity were directly proportional to distance squared, forgetting that the inverse-square law swaps the numerator and denominator distances.
REASONING PATH
Your ACEpath teacher’s suggested approach- Inverse Proportionality Ratio Check
When quantity is inversely proportional to (), the ratio between two states is .
Always verify that the smaller intensity corresponds to the larger distance before isolating variables.
CORRECTED PATH
ACEpath Teacher's Demonstration03 The student misuses the decibel definition by setting Δβ = 20 log₁₀(I₁ / I₂) as if intensity level used a factor of 20 rather than 10, resulting in r₂ = 8.94 m.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
By definition, sound intensity level uses a prefactor of , so . The factor of only appears when expressing the ratio in terms of distance because distance is squared inside the logarithm.
- Step 3Correct
Your application of the inverse-square law and your final algebra were logically sound, but your result was shifted by the incorrect intensity ratio from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the difference in sound level between the two points.
You correctly related the intensity ratio to the distance ratio using the inverse-square law.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated the base definition of sound intensity level, , with the derived distance formula, , effectively taking the square root twice.
REASONING PATH
Your ACEpath teacher’s suggested approach- Decibel Prefactor Rule
Power quantities like intensity always take . Field quantities or squared terms pull an exponent of out, making the prefactor .
Check whether the quantity inside the logarithm is intensity () or distance/amplitude ().
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite .
Substitute : .
Solve for the intensity ratio: .
Apply the inverse-square law: .
Solve for : .
Lock it in
How does sound intensity scale with distance from an isotropic (uniform spherical) point source in open air?
. Intensity follows an inverse-square law because acoustic power spreads over a spherical surface area of .
Similar question
A sound level meter located from a small omnidirectional speaker measures a sound level of . What is the sound level at a distance of ?
Answer
. The distance quadruples (), so the sound level decreases by . Thus, .
At a distance of from a uniform point source, the sound level is . At what distance does the sound level drop to ?
Answer
. The drop is . Using , we have . Therefore, .
An outdoor warning siren emits sound spherically. Moving from distance to distance causes the sound intensity level to decrease by . Determine the initial distance .
Answer
. A level decrease of means . Substituting gives .