Resources

A uniform horizontal bar of length L=0.80 mL = 0.80\text{ m} is pivoted at its left end, which is fixed at the origin (0,0)(0, 0) in the xyxy-plane. The bar lies along the positive xx-axis. A force F⃗1\vec{F}_1 of magnitude 25.0 N25.0\text{ N} is applied at the right end of the bar (x=0.80 mx = 0.80\text{ m}) directed at an angle of 30.0∘30.0^\circ above the positive xx-axis. Taking the pivot as the reference point, determine both the magnitude and the directional sign (or vector direction) of the torque exerted by F⃗1\vec{F}_1, adopting the standard right-hand rule convention where counterclockwise (out of the page, +k^+\hat{k}) is positive.

Answer and steps

Final answer

τ⃗=+10.0 N⋅m  k^\vec{\tau} = +10.0\text{ N}\cdot\text{m}\;\hat{k} (magnitude 10.0 N⋅m10.0\text{ N}\cdot\text{m}, counterclockwise / out of the page)

Steps

01

Identify the Relevant Vectors

Torque (τ⃗\vec{\tau}) relative to a pivot is defined as the cross product of the position vector (r⃗\vec{r}) and the applied force vector (F⃗\vec{F}):

τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F}

  • The position vector points from the pivot at (0,0)(0, 0) to the point of application (0.80 m,0)(0.80\text{ m}, 0): r⃗=0.80 m  i^\vec{r} = 0.80\text{ m}\;\hat{i}
  • The force has a magnitude of F=25.0 NF = 25.0\text{ N} directed at an angle θ=30.0∘\theta = 30.0^\circ relative to the positive xx-axis: F⃗=(25.0cos⁡30.0∘)  i^+(25.0sin⁡30.0∘)  j^\vec{F} = (25.0\cos 30.0^\circ)\;\hat{i} + (25.0\sin 30.0^\circ)\;\hat{j}

02

Calculate the Magnitude of the Torque

The magnitude of torque depends only on the perpendicular distance to the line of action, or equivalently, on the component of the force perpendicular to the lever arm:

τ=rFsin⁡θ\tau = r F \sin\theta

Substitute the given values:

τ=(0.80 m)⋅(25.0 N)⋅sin⁡(30.0∘)\tau = (0.80\text{ m}) \cdot (25.0\text{ N}) \cdot \sin(30.0^\circ)

Since sin⁡(30.0∘)=0.500\sin(30.0^\circ) = 0.500:

τ=(0.80 m)⋅(25.0 N)⋅(0.500)=10.0 N⋅m\tau = (0.80\text{ m}) \cdot (25.0\text{ N}) \cdot (0.500) = 10.0\text{ N}\cdot\text{m}

Common Pitfall: Do not use cos⁡θ\cos\theta to find the torque. The parallel component of the force (F∥=Fcos⁡θF_\parallel = F\cos\theta) pulls directly outward along the bar through the pivot and produces zero torque. Only the perpendicular component (F⊥=Fsin⁡θ=12.5 NF_\perp = F\sin\theta = 12.5\text{ N}) creates rotational motion.


03

Determine the Directional Sign

Apply the standard right-hand rule:

  1. Point the fingers of your right hand along the position vector r⃗\vec{r} (in the direction of the +x+x-axis).
  2. Curl your fingers toward the force vector F⃗\vec{F} (upward into the first quadrant).
  3. Your thumb points out of the page along the positive zz-axis (+k^+\hat{k}).

This force tends to rotate the bar counterclockwise about the pivot. In standard convention, counterclockwise rotations correspond to a positive sign:

τ⃗=+10.0 N⋅m  k^\vec{\tau} = +10.0\text{ N}\cdot\text{m}\;\hat{k}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses cosine instead of sine to find the perpendicular component of the force, yielding an incorrect torque magnitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    τ=r⋅F1⋅cos⁡(30.0∘)  ⟹  τ=(0.80 m)(25.0 N)cos⁡(30.0∘)  ⟹  τ=20.0⋅0.866=17.3 N⋅m\tau = r \cdot F_1 \cdot \cos(30.0^\circ) \implies \tau = (0.80\text{ m})(25.0\text{ N})\cos(30.0^\circ) \implies \tau = 20.0 \cdot 0.866 = 17.3\text{ N}\cdot\text{m}

    Correct

    τ=rF1sin⁡(30.0∘)=(0.80 m)(25.0 N)(0.500)=10.0 N⋅m\tau = r F_1 \sin(30.0^\circ) = (0.80\text{ m})(25.0\text{ N})(0.500) = 10.0\text{ N}\cdot\text{m}

    Torque is defined by the cross product magnitude τ=rFsin⁡θ\tau = r F \sin\theta, where θ\theta is the angle between the lever arm r⃗\vec{r} and the force F⃗\vec{F}. Only the perpendicular component F⊥=Fsin⁡(30.0∘)=12.5 NF_\perp = F\sin(30.0^\circ) = 12.5\text{ N} creates rotational leverage, while the parallel component F∥=Fcos⁡(30.0∘)F_\parallel = F\cos(30.0^\circ) pulls along the line of action through the pivot and creates zero torque.

  2. Step 2

    Direction is counterclockwise, so the sign is positive (+17.3 N⋅m).\text{Direction is counterclockwise, so the sign is positive } (+17.3\text{ N}\cdot\text{m}).

    Correct

    τ⃗=+10.0 N⋅m  k^ (counterclockwise)\vec{\tau} = +10.0\text{ N}\cdot\text{m}\;\hat{k} \text{ (counterclockwise)}

    Your reasoning for the direction is completely correct because curling from r⃗\vec{r} into F⃗\vec{F} points out of the page (+k^+\hat{k}, counterclockwise). However, the numerical magnitude carried over the calculation error from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the lever arm length as 0.80 m0.80\text{ m} and the force magnitude as 25.0 N25.0\text{ N}.

You correctly used the right-hand rule to establish that the force induces a counterclockwise rotation corresponding to a positive sign.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Error in Torque

Using cos⁡θ\cos\theta instead of sin⁡θ\sin\theta to find the torque magnitude when θ\theta is measured from the lever arm.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the perpendicular force component (F⊥F_\perp) that generates rotational motion with the parallel component (F∥F_\parallel) that acts directly along the lever arm.

REASONING PATH
Your ACEpath teacher’s suggested approach
Torque Cross Product Rule
  • Torque magnitude is given by τ=rFsin⁡θ\tau = r F \sin\theta, where θ\theta is the angle between r⃗\vec{r} and F⃗\vec{F}.

  • Always verify that your trigonometric function isolates the component of force perpendicular to the radial vector (F⊥=Fsin⁡θF_\perp = F\sin\theta).

Line of Action Check
  • Any force or force component directed toward or away from the pivot produces zero torque because its moment arm is zero.

  • Mentally trace the component Fcos⁡θF\cos\theta; because it points directly along the bar, eliminate it from the torque calculation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Isolate the perpendicular component of the applied force: F⊥=F1sin⁡(30.0∘)=(25.0 N)(0.500)=12.5 NF_\perp = F_1 \sin(30.0^\circ) = (25.0\text{ N})(0.500) = 12.5\text{ N}.

  2. Multiply the perpendicular force by the radial distance from the pivot: τ=rF⊥=(0.80 m)(12.5 N)=10.0 N⋅m\tau = r F_\perp = (0.80\text{ m})(12.5\text{ N}) = 10.0\text{ N}\cdot\text{m}.

  3. Combine with the counterclockwise direction: τ⃗=+10.0 N⋅m  k^\vec{\tau} = +10.0\text{ N}\cdot\text{m}\;\hat{k}.

Final answer

+10.0 N⋅m  k^+10.0\text{ N}\cdot\text{m}\;\hat{k}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw the force vector decomposed into components parallel and perpendicular to the bar before writing down a formula.

  • Check that your torque formula yields zero when θ=0∘\theta = 0^\circ or 180∘180^\circ (pulling or pushing straight along the bar).

  • Practice vector cross product calculations using τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F}.

OverviewACEpath Teacher's Diagnosis

02 The student associates clockwise with positive and counterclockwise with negative, assigning the wrong directional sign to the counterclockwise torque.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    τ=r⋅F1⋅sin⁡(30.0∘)  ⟹  τ=(0.80 m)(25.0 N)(0.50)=10.0 N⋅m\tau = r \cdot F_1 \cdot \sin(30.0^\circ) \implies \tau = (0.80\text{ m})(25.0\text{ N})(0.50) = 10.0\text{ N}\cdot\text{m}

  2. Step 2

    The force pulls upward, rotating the bar counterclockwise.

  3. Step 3

    Counterclockwise rotation corresponds to negative torque, so τ=−10.0 N⋅m\tau = -10.0\text{ N}\cdot\text{m}.

    Correct

    By the standard right-hand rule convention, counterclockwise rotation is positive (+k^+\hat{k}), so τ=+10.0 N⋅m\tau = +10.0\text{ N}\cdot\text{m} (or τ⃗=+10.0 N⋅m  k^\vec{\tau} = +10.0\text{ N}\cdot\text{m}\;\hat{k}).

    Under the standard right-hand rule convention, counterclockwise rotation corresponds to a positive torque pointing out of the page (+k^+\hat{k}), whereas clockwise is negative.

WHAT YOU DID WELL
Compliments from Your Teacher

You used the correct trigonometric component sin⁡(30.0∘)\sin(30.0^\circ) to find the perpendicular force.

You calculated the numerical magnitude of the torque accurately as 10.0 N⋅m10.0\text{ N}\cdot\text{m}.

You correctly reasoned that an upward pull at the right end creates counterclockwise rotation around the left pivot.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention reversal for rotational direction

You reversed the directional sign convention, labeling counterclockwise as negative instead of positive.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely associated 'clockwise' with standard positive motion (analogous to advancing clock hands or increasing angles in non-standard frames) rather than the standard right-hand rule where curling fingers counterclockwise points the thumb in the positive +z+z direction (out of the page).

REASONING PATH
Your ACEpath teacher’s suggested approach
Right-Hand Rule for Rotations
  • Point fingers along r⃗\vec{r} and curl toward F⃗\vec{F}; thumb points along τ⃗\vec{\tau}.

  • Always curl your right fingers in the direction of intended rotation: CCW points out of the page (+k^+\hat{k}, positive), while CW points into the page (−k^-\hat{k}, negative).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the directional convention: counterclockwise (CCW) rotation corresponds to out-of-page, defined as +k^+\hat{k}.

  2. Combine the magnitude and the correct sign: τ⃗=+10.0 N⋅m  k^\vec{\tau} = +10.0\text{ N}\cdot\text{m}\;\hat{k}.

Final answer

τ⃗=+10.0 N⋅m  k^\vec{\tau} = +10.0\text{ N}\cdot\text{m}\;\hat{k}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the standard rotational sign rule: Counterclockwise = Positive (+k^+\hat{k}), Clockwise = Negative (−k^-\hat{k}).

  • Practice using your right hand physically to verify vector cross products r⃗×F⃗\vec{r} \times \vec{F} whenever finding torque.

OverviewACEpath Teacher's Diagnosis

03 The student omits the angular factor sin(θ) entirely and computes torque as simply force times distance.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    τ=r⋅F1  ⟹  τ=(0.80 m)(25.0 N)=20.0 N⋅m\tau = r \cdot F_1 \implies \tau = (0.80\text{ m})(25.0\text{ N}) = 20.0\text{ N}\cdot\text{m}

    Correct

    τ=rF1sin⁡(30.0∘)=(0.80 m)(25.0 N)(0.500)=10.0 N⋅m\tau = r F_1 \sin(30.0^\circ) = (0.80\text{ m})(25.0\text{ N})(0.500) = 10.0\text{ N}\cdot\text{m}

    You treated the force as if it were applied perpendicular to the lever arm. Because the force acts at an angle of 30.0∘30.0^\circ relative to the position vector, you must include sin⁡(30.0∘)\sin(30.0^\circ) so that only the perpendicular component of the force produces torque.

  2. Step 2

    The force rotates the bar counterclockwise, so the torque is positive (+20.0 N⋅m+20.0\text{ N}\cdot\text{m}).

    Correct

    The force rotates the bar counterclockwise (+k^+\hat{k} direction), so τ⃗=+10.0 N⋅m  k^\vec{\tau} = +10.0\text{ N}\cdot\text{m}\;\hat{k}.

    Your right-hand rule reasoning and sign convention are entirely correct, but the final value inherits the numerical error from omitting the sine factor in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the lever arm distance r=0.80 mr = 0.80\text{ m} and force magnitude F=25.0 NF = 25.0\text{ N}.

You correctly applied the right-hand rule to conclude that counterclockwise torque corresponds to a positive sign.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of angle factor in torque calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You relied on the simplified formula τ=rF\tau = r F, which is only valid when the force vector is perpendicular to the position vector. When a force is applied at an angle θ\theta to the lever arm, only the perpendicular component F⊥=Fsin⁡θF_\perp = F\sin\theta contributes to rotation, while the parallel component passes through the pivot and produces zero torque.

REASONING PATH
Your ACEpath teacher’s suggested approach
Resolve the Perpendicular Force Component
  • The magnitude of torque is τ=rFsin⁡θ\tau = r F \sin\theta, where θ\theta is the angle between r⃗\vec{r} and F⃗\vec{F}.

  • Always verify whether the applied force is perpendicular to the lever arm; if it is inclined at an angle θ\theta, multiply by sin⁡θ\sin\theta.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the general torque magnitude equation: τ=rF1sin⁡θ\tau = r F_1 \sin\theta.

  2. Substitute the values: τ=(0.80 m)(25.0 N)sin⁡(30.0∘)\tau = (0.80\text{ m})(25.0\text{ N})\sin(30.0^\circ).

  3. Evaluate sin⁡(30.0∘)=0.500\sin(30.0^\circ) = 0.500: τ=(0.80)(25.0)(0.500)=10.0 N⋅m\tau = (0.80)(25.0)(0.500) = 10.0\text{ N}\cdot\text{m}.

  4. Combine with your correct directional sign (+k^+\hat{k}): τ⃗=+10.0 N⋅m  k^\vec{\tau} = +10.0\text{ N}\cdot\text{m}\;\hat{k}.

Final answer

τ⃗=+10.0 N⋅m  k^\vec{\tau} = +10.0\text{ N}\cdot\text{m}\;\hat{k} (magnitude 10.0 N⋅m10.0\text{ N}\cdot\text{m}, counterclockwise)

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw the force components (F∥F_\parallel and F⊥F_\perp) relative to the lever arm before setting up your torque equation.

  • Practice calculating torque on levers where forces act at non-perpendicular angles.

Lock it in

Similar question

01

A horizontal wrench of length 0.25 m0.25\text{ m} is gripped at its end. A mechanic pulls with a force of 80.0 N80.0\text{ N} at an angle of 60.0∘60.0^\circ above the handle. Calculate the magnitude of the torque exerted on the bolt.

Answer

τ=rFsin⁡θ=(0.25 m)(80.0 N)sin⁡(60.0∘)=20.0×32≈17.3 N⋅m\tau = r F \sin\theta = (0.25\text{ m})(80.0\text{ N})\sin(60.0^\circ) = 20.0 \times \frac{\sqrt{3}}{2} \approx 17.3\text{ N}\cdot\text{m}.

02

A uniform beam of length 1.20 m1.20\text{ m} lies along the positive xx-axis pivoted at the origin. A force F⃗=(15.0 i^+20.0 j^) N\vec{F} = (15.0\,\hat{i} + 20.0\,\hat{j})\text{ N} is applied at the outer tip (1.20 m,0)(1.20\text{ m}, 0). Using vector components, find the torque vector τ⃗\vec{\tau} about the origin.

Answer

Using τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F} where r⃗=1.20 i^ m\vec{r} = 1.20\,\hat{i}\text{ m}: τ⃗=(1.20 i^)×(15.0 i^+20.0 j^)=(1.20×20.0)(i^×j^)=+24.0 N⋅m  k^\vec{\tau} = (1.20\,\hat{i}) \times (15.0\,\hat{i} + 20.0\,\hat{j}) = (1.20 \times 20.0)(\hat{i} \times \hat{j}) = +24.0\text{ N}\cdot\text{m}\;\hat{k}.

03

A uniform rod of length L=2.0 mL = 2.0\text{ m} is pivoted at its left end and held at an angle of 30.0∘30.0^\circ above the horizontal. A downward vertical force of 50.0 N50.0\text{ N} acts at the right end. Find the magnitude and direction of the torque about the pivot.

Answer

The angle between the rod r⃗\vec{r} and the downward vertical force is 90∘+30∘=120∘90^\circ + 30^\circ = 120^\circ (or equivalently, the horizontal lever arm is r⊥=Lcos⁡(30.0∘)r_\perp = L\cos(30.0^\circ)). Thus τ=LFsin⁡(120.0∘)=(2.0 m)(50.0 N)(0.866)=86.6 N⋅m\tau = L F \sin(120.0^\circ) = (2.0\text{ m})(50.0\text{ N})(0.866) = 86.6\text{ N}\cdot\text{m}. The downward force causes clockwise rotation, so τ⃗=−86.6 N⋅m  k^\vec{\tau} = -86.6\text{ N}\cdot\text{m}\;\hat{k}.

Loading workspace…