Resources
A heavy uniform timber beam of length and mass is used as a first-class lever supported by a wedge fulcrum located at a distance of from its left end. A load of mass rests directly at the left tip (). An upward or downward vertical force is applied at the rightmost tip (). Taking the acceleration due to gravity as , find: (a) the exact downward effort force required to keep the beam in horizontal equilibrium, accounting for the beam's own weight acting at its center of mass, and (b) the normal reaction force exerted by the fulcrum on the beam at this critical threshold.
Answer and steps
Final answer
(a) ; (b)
Steps
Part (a): Determining the Required Effort Force
To keep the beam in horizontal static equilibrium, the net torque acting on it must be zero. Choosing the fulcrum as the pivot eliminates the torque from the unknown normal force.
-
Identify the positions and lever arms relative to the fulcrum:
- The fulcrum is located at .
- The load sits at , so its distance (lever arm) to the fulcrum is:
- Since the beam is uniform, its center of mass is at its geometric center, . The lever arm for the beam's weight is:
- The effort is applied at the right tip (), giving a lever arm of:
-
Calculate the relevant weights:
- Weight of the load:
- Weight of the beam:
-
Apply the rotational equilibrium condition ():
- The downward load creates a counterclockwise torque:
- The beam's weight and the downward effort force act to the right of the fulcrum, both producing clockwise torques:
Setting the sum of counterclockwise torques equal to the sum of clockwise torques:
(Common Pitfall: Forgetting that a heavy beam exerts its own gravitational torque at its center of mass, rather than treating the beam as massless.)
Part (b): Determining the Normal Reaction Force
For static equilibrium along the vertical axis, the net vertical force must equal zero ().
- The upward force is the normal force from the wedge fulcrum.
- The downward forces are the load weight , the beam's weight , and the downward effort :
- Substituting the calculated values:
Rounding to three significant figures to match the given data precision:
Typical errors
01 The student misidentifies the lever arm of the beam's weight as the full distance from the left end to the center of mass (2.00 m) instead of measuring from the fulcrum, leading to an incorrect effort force and reaction force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You correctly identified the positions of the load and effort relative to the fulcrum, but you recorded , which is the distance from the left tip to the center of mass. Because the fulcrum sits at , the lever arm from the fulcrum to the center of mass is .
- Step 3Correct
Your torque equilibrium method and algebra were executed cleanly, but the incorrect lever arm for the beam's weight led to an effort force of instead of .
- Step 4Correct
Your vertical equilibrium condition is completely correct, but substituting your earlier value of produced an incorrect normal force.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the downward forces using .
You correctly recognized that the net torque about the pivot must equal zero for rotational equilibrium.
You correctly balanced vertical forces to determine the reaction force .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the absolute coordinate of the beam's center of mass ( from the end) with its lever arm relative to the fulcrum (). Every lever arm in a torque equation must be measured strictly from the chosen pivot point, not from the beam's origin or endpoint.
REASONING PATH
Your ACEpath teacher’s suggested approach- Locate Pivot and Coordinates
A lever arm for a force acting at position about a pivot at is always .
Before writing torque terms, establish a single coordinate axis, mark the position of the pivot, and calculate each lever arm by subtracting the pivot coordinate from each force coordinate.
- Verify Direction of Moments
Forces on opposite sides of a pivot can produce the same rotational sense depending on their force directions.
Check whether each downward force creates a clockwise or counterclockwise torque relative to the fulcrum before writing the equation.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate the lever arm of the beam's weight relative to the fulcrum: .
Rewrite the torque balance about the fulcrum: .
Solve for the effort force: .
Substitute the correct effort force into the vertical equilibrium equation: .
(a) ; (b)
02 The student uses the total beam length of 4.00 m as the effort lever arm instead of the distance from the fulcrum (3.00 m), producing an incorrect effort force and normal reaction force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
, ,
A lever arm is the perpendicular distance from the line of action of the force to the pivot (fulcrum). Because the fulcrum sits at , the distance to the rightmost end at is , not .
- Step 3Correct
Your torque balance equation and algebra are structurally sound, but substituting the incorrect lever arm led to instead of .
- Step 4Correct
Your vertical force balance equation is completely correct, but inserting your earlier value of produced an incorrect normal reaction force.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the gravitational weights of both the load and the beam using .
You properly located the center of mass of the beam and found its distance to the fulcrum.
You correctly balanced counterclockwise and clockwise torques about the fulcrum.
You set up the vertical force equilibrium equation accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote the coordinate of the rightmost tip () as the lever arm rather than subtracting the fulcrum position ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing an absolute coordinate or total beam length with the relative distance (lever arm) measured from the chosen pivot point.
REASONING PATH
Your ACEpath teacher’s suggested approach- Define the pivot clearly
Every lever arm in must be measured strictly relative to the selected rotation axis, .
Always mark the fulcrum position as on your free-body diagram and compute each lever arm as before writing the torque equation.
- Check segment lengths against the total length
For a beam divided into two sections by a fulcrum, the sum of the left segment and the right segment must equal the total beam length.
Verify that : here, .
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute the lever arm of the effort force from the fulcrum: .
Apply the rotational equilibrium condition about the fulcrum: .
Substitute the known values: .
Solve for the effort force: .
Apply the vertical translational equilibrium condition: .
(a) ; (b)
03 The student neglects the contribution of the downward effort force when calculating the fulcrum's normal reaction force, balancing only the gravitational weights.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You omitted the downward applied effort force in your vertical force balance. Because you push downward on the right end to maintain balance, the fulcrum must support both weights plus your downward effort.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the gravitational weights of both the beam and the load.
You properly identified the lever arms relative to the fulcrum and accurately solved for using rotational equilibrium.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen transitioning from rotational equilibrium to translational equilibrium, you treated the fulcrum reaction force as merely supporting the gravitational weights of the objects, overlooking that the downward applied effort force also presses down onto the beam and must be supported by the fulcrum.
REASONING PATH
Your ACEpath teacher’s suggested approach- Free-Body Diagram Check
Every external force acting on the body must appear in translational equilibrium: .
List every vertical arrow acting on the beam before writing the equation: normal force points upward, while load weight, beam weight, and effort force all point downward.
CORRECTED PATH
ACEpath Teacher's DemonstrationSum all vertical forces acting on the beam: .
Substitute all known values: .
Calculate the total normal force: (to three significant figures).
(a) ; (b)
Lock it in
How is the lever arm of a force defined when writing a rotational equilibrium equation ?
It is the perpendicular distance between the line of action of the force and the chosen pivot point: .
Similar question
A uniform steel rod of length and mass rests on a pivot located from its left end. A load of mass is placed at the left end. What downward effort force applied at the right end keeps the rod horizontal? (Use )
Answer
(or the rod is naturally balanced). Key steps: , lever arm . Center of mass is at , so , and . Counterclockwise torque . Clockwise torque from rod weight . Since these balance exactly, .
A non-uniform beam of length and weight has its center of gravity located from the left end. A fulcrum is placed at . What vertical force must be applied at the right end () to maintain horizontal balance, and in which direction (upward or downward)?
Answer
upward. Key steps: The center of gravity is to the left of the fulcrum with lever arm . Its downward weight exerts a counterclockwise torque: . To oppose this, the force at the right end () must produce a clockwise torque, requiring an upward force: upward.
A uniform wooden beam of length and mass is pivoted at . A load of is hung at the left end (). Calculate: (a) the downward force required at the right end () for balance, and (b) the total upward support force exerted by the pivot. (Use )
Answer
(a) ; (b) . Key steps: with . acting at , so . Effort acts at with . Torque balance: . Vertical equilibrium: .