Resources

A motorized laboratory rover travels along a linear guideway. Its speed-time profile is recorded over a 30.0 s30.0\text{ s} duration: it accelerates from rest to 15.0 m/s15.0\text{ m/s} in 10.0 s10.0\text{ s}, cruises at 15.0 m/s15.0\text{ m/s} from t=10.0 st = 10.0\text{ s} to t=22.0 st = 22.0\text{ s}, and then brakes uniformly to rest at t=30.0 st = 30.0\text{ s}. Calculate the average speed of the rover over the entire 30.0 s30.0\text{ s} interval.

Answer and steps

Final answer

10.5 m/s10.5\text{ m/s}

Steps

01

Find the total distance traveled using the speed-time profile

To find the average speed over the entire interval, we use the foundational relationship: vavg=Total DistanceTotal Timev_{\text{avg}} = \frac{\text{Total Distance}}{\text{Total Time}}

On a speed-time (v-tv\text{-}t) graph, the total distance traveled corresponds to the area under the curve. The motion consists of three distinct segments forming a trapezoid:

  1. Acceleration phase (t=0 st = 0\text{ s} to t=10.0 st = 10.0\text{ s}): A triangular area with base 10.0 s10.0\text{ s} and height 15.0 m/s15.0\text{ m/s}: d1=12⋅10.0 s⋅15.0 m/s=75.0 md_1 = \frac{1}{2} \cdot 10.0\text{ s} \cdot 15.0\text{ m/s} = 75.0\text{ m}
  2. Cruising phase (t=10.0 st = 10.0\text{ s} to t=22.0 st = 22.0\text{ s}): A rectangular area with base Δt=22.0 s−10.0 s=12.0 s\Delta t = 22.0\text{ s} - 10.0\text{ s} = 12.0\text{ s} and height 15.0 m/s15.0\text{ m/s}: d2=12.0 s⋅15.0 m/s=180.0 md_2 = 12.0\text{ s} \cdot 15.0\text{ m/s} = 180.0\text{ m}
  3. Deceleration phase (t=22.0 st = 22.0\text{ s} to t=30.0 st = 30.0\text{ s}): A triangular area with base Δt=30.0 s−22.0 s=8.0 s\Delta t = 30.0\text{ s} - 22.0\text{ s} = 8.0\text{ s} and height 15.0 m/s15.0\text{ m/s}: d3=12⋅8.0 s⋅15.0 m/s=60.0 md_3 = \frac{1}{2} \cdot 8.0\text{ s} \cdot 15.0\text{ m/s} = 60.0\text{ m}

Summing these three segments gives the total distance:

dtotal=d1+d2+d3=75.0 m+180.0 m+60.0 m=315.0 md_{\text{total}} = d_1 + d_2 + d_3 = 75.0\text{ m} + 180.0\text{ m} + 60.0\text{ m} = 315.0\text{ m}

(Alternative method: Using the trapezoid area formula directly, dtotal=b1+b22⋅h=30.0 s+12.0 s2⋅15.0 m/s=21.0 s⋅15.0 m/s=315.0 md_{\text{total}} = \frac{b_1 + b_2}{2} \cdot h = \frac{30.0\text{ s} + 12.0\text{ s}}{2} \cdot 15.0\text{ m/s} = 21.0\text{ s} \cdot 15.0\text{ m/s} = 315.0\text{ m}.)

02

Compute the average speed

Divide the total distance by the total time elapsed (ttotal=30.0 st_{\text{total}} = 30.0\text{ s}):

vavg=315.0 m30.0 s=10.5 m/sv_{\text{avg}} = \frac{315.0\text{ m}}{30.0\text{ s}} = 10.5\text{ m/s}

Common Pitfall: Do not average the initial, peak, and final speeds directly (e.g., 0+15+03=5 m/s\frac{0 + 15 + 0}{3} = 5\text{ m/s}). A simple arithmetic mean of speeds does not account for the unequal durations spent at different speeds; average speed is strictly total distance divided by total time.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the unweighted arithmetic mean of the initial, cruise, and final speeds instead of dividing total distance by total time, obtaining 10.0 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    vavg=vinitial+vcruise+vfinal3=0+15.0+03=5.0 m/sv_{\text{avg}} = \frac{v_{\text{initial}} + v_{\text{cruise}} + v_{\text{final}}}{3} = \frac{0 + 15.0 + 0}{3} = 5.0\text{ m/s}

    Correct

    dtotal=12(10.0)(15.0)+(12.0)(15.0)+12(8.0)(15.0)=315.0 md_{\text{total}} = \frac{1}{2}(10.0)(15.0) + (12.0)(15.0) + \frac{1}{2}(8.0)(15.0) = 315.0\text{ m}

    You treated average speed as the simple arithmetic mean of three discrete speeds. Because the rover spends different amounts of time accelerating, cruising, and decelerating, you must find the total distance traveled (the area under the v-tv\text{-}t graph) first.

  2. Step 2

    vavg=0+15.0+15.0+04=7.5 m/s  ⟹  vavg=0+15.0+15.03=10.0 m/sv_{\text{avg}} = \frac{0 + 15.0 + 15.0 + 0}{4} = 7.5\text{ m/s} \implies v_{\text{avg}} = \frac{0 + 15.0 + 15.0}{3} = 10.0\text{ m/s}

    Correct

    vavg=dtotalttotal=315.0 m30.0 s=10.5 m/sv_{\text{avg}} = \frac{d_{\text{total}}}{t_{\text{total}}} = \frac{315.0\text{ m}}{30.0\text{ s}} = 10.5\text{ m/s}

    Your subsequent trials continued to average isolated speed values rather than dividing the total distance of 315.0 m315.0\text{ m} by the total duration of 30.0 s30.0\text{ s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the key speed values from the problem statement, including the rest states (0 m/s0\text{ m/s}) and cruising speed (15.0 m/s)15.0\text{ m/s}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Arithmetic Mean of Speeds Instead of Total Distance over Total Time

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used a simple arithmetic average of boundary speeds instead of applying the definition of average speed, vavg=ΔdΔtv_{\text{avg}} = \frac{\Delta d}{\Delta t}, which requires calculating the area under the speed-time graph.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Average Speed
  • Average speed is always vavg=Total DistanceTotal Timev_{\text{avg}} = \frac{\text{Total Distance}}{\text{Total Time}}, never the simple average of speeds unless time intervals are equal and acceleration is constant throughout.

  • Calculate the total distance first by finding the geometric area under each section of the v-tv\text{-}t graph.

Area Under a Speed-Time Graph
  • On a v-tv\text{-}t plot, displacement/distance is represented by the area bounded by the curve and the time axis (e.g., triangles for linear acceleration/braking and rectangles for constant cruise).

  • Split the motion into standard geometric shapes (triangles and rectangles) or use the trapezoid formula b1+b22⋅h\frac{b_1 + b_2}{2} \cdot h.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the distance of the acceleration phase: d1=12×10.0 s×15.0 m/s=75.0 md_1 = \frac{1}{2} \times 10.0\text{ s} \times 15.0\text{ m/s} = 75.0\text{ m}.

  2. Calculate the distance of the constant-speed cruising phase: d2=(22.0 s−10.0 s)×15.0 m/s=12.0 s×15.0 m/s=180.0 md_2 = (22.0\text{ s} - 10.0\text{ s}) \times 15.0\text{ m/s} = 12.0\text{ s} \times 15.0\text{ m/s} = 180.0\text{ m}.

  3. Calculate the distance of the braking phase: d3=12×(30.0 s−22.0 s)×15.0 m/s=12×8.0 s×15.0 m/s=60.0 md_3 = \frac{1}{2} \times (30.0\text{ s} - 22.0\text{ s}) \times 15.0\text{ m/s} = \frac{1}{2} \times 8.0\text{ s} \times 15.0\text{ m/s} = 60.0\text{ m}.

  4. Sum the distances to find total distance: dtotal=75.0 m+180.0 m+60.0 m=315.0 md_{\text{total}} = 75.0\text{ m} + 180.0\text{ m} + 60.0\text{ m} = 315.0\text{ m}.

  5. Divide by total time: vavg=315.0 m30.0 s=10.5 m/sv_{\text{avg}} = \frac{315.0\text{ m}}{30.0\text{ s}} = 10.5\text{ m/s}.

Final answer

10.5 m/s10.5\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the speed-time graph whenever a multi-stage motion problem is described.

  • Shade the region under the curve and calculate its total area to determine total distance.

  • Divide that total distance by the total elapsed time to find the average speed.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the distance of the acceleration and braking phases using base times height rather than (1/2) base times height as required for triangular areas, resulting in an average speed of 15.0 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    d1=10.0×15.0=150.0 md_1 = 10.0 \times 15.0 = 150.0\text{ m}

    Correct

    d1=12(10.0 s)(15.0 m/s)=75.0 md_1 = \frac{1}{2}(10.0\text{ s})(15.0\text{ m/s}) = 75.0\text{ m}

    Because the rover accelerates uniformly from rest, its speed changes linearly with time. On a speed-time graph, this region is a triangle, so the distance is the area of a triangle, 12⋅base⋅height\frac{1}{2} \cdot \text{base} \cdot \text{height}, not base⋅height\text{base} \cdot \text{height}.

  2. Step 2

    d2=(22.0−10.0)×15.0=12.0×15.0=180.0 md_2 = (22.0 - 10.0) \times 15.0 = 12.0 \times 15.0 = 180.0\text{ m}

  3. Step 3

    d3=(30.0−22.0)×15.0=8.0×15.0=120.0 md_3 = (30.0 - 22.0) \times 15.0 = 8.0 \times 15.0 = 120.0\text{ m}

    Correct

    d3=12(30.0 s−22.0 s)(15.0 m/s)=60.0 md_3 = \frac{1}{2}(30.0\text{ s} - 22.0\text{ s})(15.0\text{ m/s}) = 60.0\text{ m}

    During braking, the rover decelerates uniformly to rest. The area under this linear deceleration segment on a speed-time graph is triangular, requiring a factor of 12\frac{1}{2}.

  4. Step 4

    dtotal=150.0+180.0+120.0=450.0 md_{\text{total}} = 150.0 + 180.0 + 120.0 = 450.0\text{ m}

    Correct

    dtotal=75.0 m+180.0 m+60.0 m=315.0 md_{\text{total}} = 75.0\text{ m} + 180.0\text{ m} + 60.0\text{ m} = 315.0\text{ m}

    You correctly added the three segment distances, but the sum is affected by the overestimated values of d1d_1 and d3d_3.

  5. Step 5

    vavg=450.0/30.0=15.0 m/sv_{\text{avg}} = 450.0 / 30.0 = 15.0\text{ m/s}

    Correct

    vavg=315.0 m30.0 s=10.5 m/sv_{\text{avg}} = \frac{315.0\text{ m}}{30.0\text{ s}} = 10.5\text{ m/s}

    You correctly used the definition vavg=dtotalttotalv_{\text{avg}} = \frac{d_{\text{total}}}{t_{\text{total}}}, but substituting 450.0 m450.0\text{ m} resulted in an incorrect average speed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the time elapsed in each phase.

You correctly calculated the distance traveled during the constant-speed cruising phase.

You correctly applied the formula for average speed as total distance divided by total time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometric Area Misidentification on v-t Graph

You omitted the factor of 12\frac{1}{2} when finding the area under the triangular segments of the speed-time graph.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated changing-speed segments as if the rover traveled at the peak speed of 15.0 m/s15.0\text{ m/s} for the entire acceleration and deceleration intervals, rather than using the average speed of 7.5 m/s7.5\text{ m/s} (or triangular area under a v-tv\text{-}t graph) for uniform acceleration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Shape Under the $v\text{-}t$ Curve
  • On a speed-time graph, constant speed yields a rectangular area (b⋅hb \cdot h), whereas uniform acceleration/deceleration starting or ending at rest yields a triangular area (12b⋅h\frac{1}{2} b \cdot h).

  • Always sketch or visualize the v-tv\text{-}t profile and label each sub-area as a rectangle or triangle before multiplying values.

Physical Reality Check on Average Speed
  • If an object travels at or below 15.0 m/s15.0\text{ m/s} for the entire trip and spends part of that time at lower speeds, its average speed over the entire interval must be strictly less than 15.0 m/s15.0\text{ m/s}.

  • Check whether your calculated average speed equals the maximum speed; if it does, check whether you accidentally assumed peak speed throughout.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the acceleration distance as a triangular area: d1=12(10.0 s)(15.0 m/s)=75.0 md_1 = \frac{1}{2}(10.0\text{ s})(15.0\text{ m/s}) = 75.0\text{ m}.

  2. Keep the cruising distance: d2=(12.0 s)(15.0 m/s)=180.0 md_2 = (12.0\text{ s})(15.0\text{ m/s}) = 180.0\text{ m}.

  3. Recalculate the deceleration distance as a triangular area: d3=12(8.0 s)(15.0 m/s)=60.0 md_3 = \frac{1}{2}(8.0\text{ s})(15.0\text{ m/s}) = 60.0\text{ m}.

  4. Sum the correct distances: dtotal=75.0 m+180.0 m+60.0 m=315.0 md_{\text{total}} = 75.0\text{ m} + 180.0\text{ m} + 60.0\text{ m} = 315.0\text{ m}.

  5. Divide by total time: vavg=315.0 m30.0 s=10.5 m/sv_{\text{avg}} = \frac{315.0\text{ m}}{30.0\text{ s}} = 10.5\text{ m/s}.

Final answer

10.5 m/s10.5\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice sketching v-tv\text{-}t graphs for multi-phase motion and decomposing them into distinct geometric regions (rectangles and triangles).

  • Verify your final average speed against the maximum and minimum speeds of the journey as a common-sense sanity check.

OverviewACEpath Teacher's Diagnosis

03 The student miscalculates the duration of the constant speed cruise phase by using the timestamp 22.0 s instead of the elapsed time 12.0 s, leading to an incorrect average speed of 15.5 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    d1=12⋅10.0⋅15.0=75.0 md_1 = \frac{1}{2} \cdot 10.0 \cdot 15.0 = 75.0\text{ m}

  2. Step 2

    d2=22.0⋅15.0=330.0 md_2 = 22.0 \cdot 15.0 = 330.0\text{ m}

    Correct

    d2=(22.0 s−10.0 s)⋅15.0 m/s=12.0 s⋅15.0 m/s=180.0 md_2 = (22.0\text{ s} - 10.0\text{ s}) \cdot 15.0\text{ m/s} = 12.0\text{ s} \cdot 15.0\text{ m/s} = 180.0\text{ m}

    You multiplied the speed by the clock timestamp t=22.0 st = 22.0\text{ s} rather than the elapsed time interval Δt=22.0 s−10.0 s=12.0 s\Delta t = 22.0\text{ s} - 10.0\text{ s} = 12.0\text{ s}.

  3. Step 3

    d3=12⋅8.0⋅15.0=60.0 md_3 = \frac{1}{2} \cdot 8.0 \cdot 15.0 = 60.0\text{ m}

  4. Step 4

    dtotal=75.0+330.0+60.0=465.0 md_{\text{total}} = 75.0 + 330.0 + 60.0 = 465.0\text{ m}

    Correct

    dtotal=75.0 m+180.0 m+60.0 m=315.0 md_{\text{total}} = 75.0\text{ m} + 180.0\text{ m} + 60.0\text{ m} = 315.0\text{ m}

    Your addition method is correct, but the sum carries over the incorrect value from d2d_2.

  5. Step 5

    vavg=465.030.0=15.5 m/sv_{\text{avg}} = \frac{465.0}{30.0} = 15.5\text{ m/s}

    Correct

    vavg=315.0 m30.0 s=10.5 m/sv_{\text{avg}} = \frac{315.0\text{ m}}{30.0\text{ s}} = 10.5\text{ m/s}

    You correctly applied the definition vavg=dtotalttotalv_{\text{avg}} = \frac{d_{\text{total}}}{t_{\text{total}}}, but the result is affected by the earlier error in d2d_2.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that distance equals the area under the speed-time graph.

You correctly calculated the triangular areas for both the acceleration and deceleration phases.

You used the correct relationship between average speed, total distance, and total elapsed time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Timestamp vs. Interval Confusion

You used the instant t=22.0 st = 22.0\text{ s} as the duration of the cruise instead of subtracting the start time 10.0 s10.0\text{ s}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated a point in time (timestamp tt) with an elapsed time interval (Δt=t2−t1\Delta t = t_2 - t_1). Notice also a quick reality check: the rover never traveled faster than 15.0 m/s15.0\text{ m/s}, so its average speed cannot exceed 15.0 m/s15.0\text{ m/s}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Calculate Interval Width
  • The horizontal dimension of any segment on a time graph is always Δt=tend−tstart\Delta t = t_{\text{end}} - t_{\text{start}}, never just tendt_{\text{end}} unless tstart=0t_{\text{start}} = 0.

  • Always write out Δt=t2−t1\Delta t = t_2 - t_1 explicitly before multiplying by velocity.

Sanity-Check Average Speed
  • The average speed of any trip must fall between the minimum speed and the maximum speed reached during that trip: vmin⁡≤vavg≤vmax⁡v_{\min} \le v_{\text{avg}} \le v_{\max}.

  • If your computed average speed exceeds the maximum speed in the problem, recheck your segment durations and area sums.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the duration of the cruising phase: Δt2=22.0 s−10.0 s=12.0 s\Delta t_2 = 22.0\text{ s} - 10.0\text{ s} = 12.0\text{ s}.

  2. Compute the correct cruising distance: d2=12.0 s⋅15.0 m/s=180.0 md_2 = 12.0\text{ s} \cdot 15.0\text{ m/s} = 180.0\text{ m}.

  3. Sum all three segment distances: dtotal=75.0 m+180.0 m+60.0 m=315.0 md_{\text{total}} = 75.0\text{ m} + 180.0\text{ m} + 60.0\text{ m} = 315.0\text{ m}.

  4. Compute the average speed: vavg=315.0 m30.0 s=10.5 m/sv_{\text{avg}} = \frac{315.0\text{ m}}{30.0\text{ s}} = 10.5\text{ m/s}.

Final answer

10.5 m/s10.5\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Annotate graph segments with elapsed intervals Δt\Delta t directly along the horizontal axis before calculating areas.

  • Perform a physical bounds check by verifying that vmin⁡≤vavg≤vmax⁡v_{\min} \le v_{\text{avg}} \le v_{\max} at the end of every average velocity or speed problem.

Lock it in

Similar question

01

A train accelerates uniformly from rest to 20.0 m/s20.0\text{ m/s} in 15.0 s15.0\text{ s}, then immediately brakes uniformly to rest in 5.0 s5.0\text{ s}. Find its average speed over the entire 20.0 s20.0\text{ s} trip.

Answer

10.0 m/s10.0\text{ m/s}. The total distance is the area of a single triangle: d=12×20.0 s×20.0 m/s=200.0 md = \frac{1}{2} \times 20.0\text{ s} \times 20.0\text{ m/s} = 200.0\text{ m}. Dividing by total time gives vavg=200.0 m20.0 s=10.0 m/sv_{\text{avg}} = \frac{200.0\text{ m}}{20.0\text{ s}} = 10.0\text{ m/s}.

02

An electric scooter moves at a constant speed of 6.0 m/s6.0\text{ m/s} for 20.0 s20.0\text{ s}, then increases its speed uniformly to 12.0 m/s12.0\text{ m/s} over the next 10.0 s10.0\text{ s}. What is its average speed across the full 30.0 s30.0\text{ s} interval?

Answer

7.0 m/s7.0\text{ m/s}. Distance in phase 1 is 6.0×20.0=120.0 m6.0 \times 20.0 = 120.0\text{ m}. Distance in phase 2 is 6.0+12.02×10.0=90.0 m\frac{6.0 + 12.0}{2} \times 10.0 = 90.0\text{ m}. Total distance is 120.0+90.0=210.0 m120.0 + 90.0 = 210.0\text{ m}. Thus, vavg=210.0 m30.0 s=7.0 m/sv_{\text{avg}} = \frac{210.0\text{ m}}{30.0\text{ s}} = 7.0\text{ m/s}.

03

A runner sprints 100.0 m100.0\text{ m} at an average speed of 10.0 m/s10.0\text{ m/s}, then walks 100.0 m100.0\text{ m} back at an average speed of 2.5 m/s2.5\text{ m/s}. Compute the average speed for the entire 200.0 m200.0\text{ m} journey.

Answer

4.0 m/s4.0\text{ m/s}. Time sprinting is t1=100.010.0=10.0 st_1 = \frac{100.0}{10.0} = 10.0\text{ s}. Time walking is t2=100.02.5=40.0 st_2 = \frac{100.0}{2.5} = 40.0\text{ s}. Total time is 10.0+40.0=50.0 s10.0 + 40.0 = 50.0\text{ s}. Average speed is vavg=200.0 m50.0 s=4.0 m/sv_{\text{avg}} = \frac{200.0\text{ m}}{50.0\text{ s}} = 4.0\text{ m/s} (not the arithmetic mean of 10.010.0 and 2.52.5, which would be 6.25 m/s6.25\text{ m/s}).

Loading workspace…