Resources

A package of mass m=2.50 kgm = 2.50\text{ kg} is released from rest at the top of a curved loading slide at a vertical height of h=3.60 mh = 3.60\text{ m} above the floor. Friction along the slide does Wf,slide=−22.5 JW_{f,\text{slide}} = -22.5\text{ J} of work on the package. Upon reaching the bottom, the package slides horizontally onto the flat bed of a truck positioned at floor level. While sliding along the horizontal truck bed, a constant braking friction force of magnitude fk=11.0 Nf_k = 11.0\text{ N} acts on the package over a stopping distance of d=4.20 md = 4.20\text{ m}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate: (a) the kinetic energy K1K_1 of the package at the bottom of the slide, (b) the work done by friction along the flat truck bed Wf,bedW_{f,\text{bed}}, and (c) the final speed vfv_f of the package at the end of the 4.20 m4.20\text{ m} skid.

Answer and steps

Final answer

(a) K1=65.7 JK_1 = 65.7\text{ J}; (b) Wf,bed=−46.2 JW_{f,\text{bed}} = -46.2\text{ J}; (c) vf=3.95 m/sv_f = 3.95\text{ m/s}.

Steps

Part (a): Kinetic Energy at the Bottom of the Slide

To find the kinetic energy at the bottom of the slide, apply the work-energy theorem to the package during its motion down the slide.

  1. Calculate the initial gravitational potential energy:
    Taking the floor as the reference level (y=0 my = 0\text{ m}), the package starts at height h=3.60 mh = 3.60\text{ m} from rest (K0=0 JK_0 = 0\text{ J}): Ui=mgh=(2.50 kg)(9.80 m/s2)(3.60 m)=88.2 JU_i = mgh = (2.50\text{ kg})(9.80\text{ m/s}^2)(3.60\text{ m}) = 88.2\text{ J}
  2. Apply conservation of energy with non-conservative work:
    The work done by friction along the slide reduces the total mechanical energy: Ef−Ei=Wf,slideE_f - E_i = W_{f,\text{slide}} (K1+0)−(0+Ui)=Wf,slide(K_1 + 0) - (0 + U_i) = W_{f,\text{slide}} K1=Ui+Wf,slideK_1 = U_i + W_{f,\text{slide}}
  3. Substitute the known values:
    K1=88.2 J+(−22.5 J)=65.7 JK_1 = 88.2\text{ J} + (-22.5\text{ J}) = 65.7\text{ J}

Part (b): Work Done by Friction on the Truck Bed

The package slides horizontally over a displacement of d=4.20 md = 4.20\text{ m} along the truck bed.

  1. Identify the force and displacement vectors:
    The kinetic friction force fk=11.0 Nf_k = 11.0\text{ N} acts in the direction opposite to the package's displacement (θ=180∘\theta = 180^\circ).
  2. Compute the work:
    Wf,bed=fkdcos⁡(180∘)=−fkdW_{f,\text{bed}} = f_k d \cos(180^\circ) = -f_k d Wf,bed=−(11.0 N)(4.20 m)=−46.2 JW_{f,\text{bed}} = -(11.0\text{ N})(4.20\text{ m}) = -46.2\text{ J}

(Pitfall: Ensure the work done by kinetic friction is written with a negative sign, as the force directly opposes the displacement.)


Part (c): Final Speed of the Package

  1. Determine the remaining kinetic energy after skidding:
    Using the work-energy theorem for the horizontal segment: Kf−K1=Wf,bedK_f - K_1 = W_{f,\text{bed}} Kf=K1+Wf,bed=65.7 J+(−46.2 J)=19.5 JK_f = K_1 + W_{f,\text{bed}} = 65.7\text{ J} + (-46.2\text{ J}) = 19.5\text{ J}
  2. Solve for the final speed vfv_f:
    Relate kinetic energy to speed: Kf=12mvf2  ⟹  vf=2KfmK_f = \frac{1}{2}m v_f^2 \implies v_f = \sqrt{\frac{2K_f}{m}} vf=2(19.5 J)2.50 kg=39.02.50=15.6≈3.95 m/sv_f = \sqrt{\frac{2(19.5\text{ J})}{2.50\text{ kg}}} = \sqrt{\frac{39.0}{2.50}} = \sqrt{15.6} \approx 3.95\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student adds the magnitude of friction work along the slide instead of recognizing it does negative work that reduces kinetic energy, leading to an overstated K₁ of 110.7 J.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mgh=2.50×9.80×3.60=88.2 Jmgh = 2.50 \times 9.80 \times 3.60 = 88.2\text{ J}

  2. Step 2

    K1=mgh−Wf=88.2−(−22.5)=110.7 JK_1 = mgh - W_f = 88.2 - (-22.5) = 110.7\text{ J}

    Correct

    K1=mgh+Wf,slide=88.2 J+(−22.5 J)=65.7 JK_1 = mgh + W_{f,\text{slide}} = 88.2\text{ J} + (-22.5\text{ J}) = 65.7\text{ J}

    The work-energy theorem states that ΔE=Wnc\Delta E = W_{\text{nc}}, so (K1−0)+(0−mgh)=Wf,slide(K_1 - 0) + (0 - mgh) = W_{f,\text{slide}}, which gives K1=mgh+Wf,slideK_1 = mgh + W_{f,\text{slide}}. Because Wf,slide=−22.5 JW_{f,\text{slide}} = -22.5\text{ J} is already negative, writing mgh−Wfmgh - W_f created a double negative, causing friction to incorrectly add energy.

  3. Step 3

    W(f,bed)=−fk×d=−11.0×4.20=−46.2 JW_{(f,\text{bed})} = -f_k \times d = -11.0 \times 4.20 = -46.2\text{ J}

  4. Step 4

    Kf=K1+W(f,bed)=110.7−46.2=64.5 J  ⟹  vf=2×64.52.50=51.6≈7.18 m/sK_f = K_1 + W_{(f,\text{bed})} = 110.7 - 46.2 = 64.5\text{ J} \implies v_f = \sqrt{\frac{2 \times 64.5}{2.50}} = \sqrt{51.6} \approx 7.18\text{ m/s}

    Correct

    Kf=65.7 J+(−46.2 J)=19.5 J  ⟹  vf=2(19.5 J)2.50 kg≈3.95 m/sK_f = 65.7\text{ J} + (-46.2\text{ J}) = 19.5\text{ J} \implies v_f = \sqrt{\frac{2(19.5\text{ J})}{2.50\text{ kg}}} \approx 3.95\text{ m/s}

    Your method for finding KfK_f and solving for vfv_f is completely sound, but your numerical answer is affected by the overstated K1K_1 value from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial gravitational potential energy.

You correctly computed the negative work done by kinetic friction along the flat truck bed.

You applied the work-energy theorem and the definition of kinetic energy correctly to find the final speed in Part (c).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Double-negative sign error in work-energy relation

You set up K1=mgh−WfK_1 = mgh - W_f while treating WfW_f as a negative quantity, inadvertently adding energy instead of removing it.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing whether a work term is defined as a signed quantity or as a magnitude when writing the energy balance equation. The work-energy theorem adds net external work algebraically (Ef=Ei+WncE_f = E_i + W_{\text{nc}}); if you pre-assign a minus sign (Ef=Ei−∣Wf∣E_f = E_i - |W_f|), you must substitute only the positive magnitude ∣Wf∣|W_f|.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Reality Check
  • Friction is a dissipative force that removes mechanical energy; a package released from rest cannot have more kinetic energy at the bottom than its initial potential energy.

  • Always verify that K1<UiK_1 < U_i when friction opposes motion (65.7 J<88.2 J65.7\text{ J} < 88.2\text{ J}). Seeing 110.7 J>88.2 J110.7\text{ J} > 88.2\text{ J} is an immediate signal of a sign error.

Consistent Sign Convention
  • In the general work-energy theorem, ΔK+ΔU=Wnc\Delta K + \Delta U = W_{\text{nc}}, which rearranges to Ef=Ei+WncE_f = E_i + W_{\text{nc}}.

  • Write the work-energy theorem with addition (Ef=Ei+WncE_f = E_i + W_{\text{nc}}) and substitute signed values directly (+(−22.5 J)+ (-22.5\text{ J})).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the mechanical energy balance down the slide: K1=Ui+Wf,slideK_1 = U_i + W_{f,\text{slide}}.

  2. Substitute the signed value Wf,slide=−22.5 JW_{f,\text{slide}} = -22.5\text{ J}: K1=88.2 J+(−22.5 J)=65.7 JK_1 = 88.2\text{ J} + (-22.5\text{ J}) = 65.7\text{ J}.

  3. Apply the work-energy relation on the truck bed: Kf=K1+Wf,bed=65.7 J+(−46.2 J)=19.5 JK_f = K_1 + W_{f,\text{bed}} = 65.7\text{ J} + (-46.2\text{ J}) = 19.5\text{ J}.

  4. Solve for the final speed: vf=2Kfm=2(19.5 J)2.50 kg=15.6≈3.95 m/sv_f = \sqrt{\frac{2 K_f}{m}} = \sqrt{\frac{2(19.5\text{ J})}{2.50\text{ kg}}} = \sqrt{15.6} \approx 3.95\text{ m/s}.

Final answer

(a) K1=65.7 JK_1 = 65.7\text{ J}; (b) Wf,bed=−46.2 JW_{f,\text{bed}} = -46.2\text{ J}; (c) vf=3.95 m/sv_f = 3.95\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how signed non-conservative work enters the energy balance equation: Ef=Ei+WncE_f = E_i + W_{\text{nc}}.

  • Perform a quick sanity check after finding intermediate energies to ensure energy has not been created by dissipative forces.

  • Practice problems that combine conservative and non-conservative forces along multi-stage paths.

OverviewACEpath Teacher's Diagnosis

02 The student treats work done by friction on the horizontal bed as positive, adding 46.2 J to the kinetic energy instead of subtracting it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mgh=2.50×9.80×3.60=88.2 J  ⟹  K1=88.2−22.5=65.7 Jmgh = 2.50 \times 9.80 \times 3.60 = 88.2\text{ J} \implies K_1 = 88.2 - 22.5 = 65.7\text{ J}

  2. Step 2

    W(f,bed)=fk×d=11.0×4.20=46.2 JW_{(f,\text{bed})} = f_k \times d = 11.0 \times 4.20 = 46.2\text{ J}

    Correct

    Wf,bed=fkdcos⁡(180∘)=−(11.0 N)(4.20 m)=−46.2 JW_{f,\text{bed}} = f_k d \cos(180^\circ) = -(11.0\text{ N})(4.20\text{ m}) = -46.2\text{ J}

    Kinetic friction opposes the direction of motion (θ=180∘\theta = 180^\circ), so the work done by friction must be negative: W=−fkd=−46.2 JW = -f_k d = -46.2\text{ J}.

  3. Step 3

    Kf=K1+W(f,bed)=65.7+46.2=111.9 J  ⟹  vf=2×111.92.50=89.52≈9.46 m/sK_f = K_1 + W_{(f,\text{bed})} = 65.7 + 46.2 = 111.9\text{ J} \implies v_f = \sqrt{\frac{2 \times 111.9}{2.50}} = \sqrt{89.52} \approx 9.46\text{ m/s}

    Correct

    Kf=65.7 J+(−46.2 J)=19.5 J  ⟹  vf=2(19.5 J)2.50 kg≈3.95 m/sK_f = 65.7\text{ J} + (-46.2\text{ J}) = 19.5\text{ J} \implies v_f = \sqrt{\frac{2(19.5\text{ J})}{2.50\text{ kg}}} \approx 3.95\text{ m/s}

    Your formula and algebra were applied logically, but using a positive value for friction work falsely increased the kinetic energy instead of dissipating it.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the package's initial gravitational potential energy as 88.2 J88.2\text{ J}.

You properly subtracted the slide friction energy loss to get K1=65.7 JK_1 = 65.7\text{ J}.

You applied the relationship between kinetic energy and speed correctly in your final step.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in work done by friction

You calculated the magnitude of friction work as fkdf_k d but forgot that friction opposes displacement, requiring a negative sign.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating work as simply force times distance without accounting for vector direction: when a force opposes displacement (θ=180∘\theta = 180^\circ), cos⁡(180∘)=−1\cos(180^\circ) = -1, meaning friction does negative work and removes mechanical energy from the object.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Force and Displacement
  • Work is defined by the dot product W=F⃗⋅d⃗=Fdcos⁡θW = \vec{F} \cdot \vec{d} = F d \cos\theta.

  • Always draw arrows for the displacement d⃗\vec{d} and the force F⃗\vec{F}. If they point in opposite directions, assign a negative sign (W=−FdW = -F d).

Physical Reality Check
  • Braking kinetic friction dissipates mechanical energy into thermal energy.

  • Verify that kinetic energy decreases along a rough horizontal surface: KfK_f must be less than KiK_i.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Wf,bed=−fkd=−(11.0 N)(4.20 m)=−46.2 JW_{f,\text{bed}} = -f_k d = -(11.0\text{ N})(4.20\text{ m}) = -46.2\text{ J}

  2. Kf=K1+Wf,bed=65.7 J−46.2 J=19.5 JK_f = K_1 + W_{f,\text{bed}} = 65.7\text{ J} - 46.2\text{ J} = 19.5\text{ J}

  3. vf=2Kfm=2(19.5 J)2.50 kg=15.6≈3.95 m/sv_f = \sqrt{\frac{2 K_f}{m}} = \sqrt{\frac{2(19.5\text{ J})}{2.50\text{ kg}}} = \sqrt{15.6} \approx 3.95\text{ m/s}

Final answer

(a) K1=65.7 JK_1 = 65.7\text{ J}; (b) Wf,bed=−46.2 JW_{f,\text{bed}} = -46.2\text{ J}; (c) vf=3.95 m/sv_f = 3.95\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include the angle factor cos⁡θ\cos\theta explicitly whenever setting up a work equation.

  • Perform a sanity check on final velocity: sliding across a rough floor should slow an object down, not speed it up.

  • Practice identifying whether each force adds energy (positive work) or removes energy (negative work) before calculating numbers.

OverviewACEpath Teacher's Diagnosis

03 The student forgets the factor of 1/2 in the kinetic energy formula when solving for speed, computing v_f = K_f / m instead of √(2K_f / m).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mgh=2.50×9.80×3.60=88.2 J  ⟹  K1=88.2−22.5=65.7 Jmgh = 2.50 \times 9.80 \times 3.60 = 88.2\text{ J} \implies K_1 = 88.2 - 22.5 = 65.7\text{ J}

  2. Step 2

    W(f,bed)=−fk×d=−11.0×4.20=−46.2 JW_{(f,\text{bed})} = -f_k \times d = -11.0 \times 4.20 = -46.2\text{ J}

  3. Step 3

    Kf=65.7−46.2=19.5 JK_f = 65.7 - 46.2 = 19.5\text{ J}

  4. Step 4

    vf=Kfm=19.52.50=7.80 m/sv_f = \frac{K_f}{m} = \frac{19.5}{2.50} = 7.80\text{ m/s}

    Correct

    vf=2Kfm=2(19.5 J)2.50 kg≈3.95 m/sv_f = \sqrt{\frac{2K_f}{m}} = \sqrt{\frac{2(19.5\text{ J})}{2.50\text{ kg}}} \approx 3.95\text{ m/s}

    The definition of translational kinetic energy is K=12mv2K = \frac{1}{2}mv^2. Solving for speed gives v=2Kmv = \sqrt{\frac{2K}{m}}, not Km\frac{K}{m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the work-energy theorem to find the kinetic energy at the base of the incline.

You correctly assigned the negative sign to the work done by friction opposing horizontal motion.

You correctly found the remaining kinetic energy of the package before solving for velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinetic Energy Inversion Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated kinetic energy as directly proportional to speed (K=mvK = mv) rather than proportional to the square of speed with a factor of one-half (K=12mv2K = \frac{1}{2}mv^2), leading to a missing factor of 2 and a missing square root operation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Energy Formula
  • K=12mv2K = \frac{1}{2}m v^2

  • Always isolate v2v^2 first (v2=2Kmv^2 = \frac{2K}{m}) and then take the square root (v=2Kmv = \sqrt{\frac{2K}{m}}).

Unit Dimensional Check
  • Km\frac{K}{m} has units of Jkg=m2s2\frac{\text{J}}{\text{kg}} = \frac{\text{m}^2}{\text{s}^2}, which represents velocity squared, not velocity.

  • Check the units: a velocity must have units of m/s\text{m/s}, requiring a square root.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the definition of kinetic energy: Kf=12mvf2K_f = \frac{1}{2}m v_f^2.

  2. Rearrange for vfv_f: vf=2Kfmv_f = \sqrt{\frac{2K_f}{m}}.

  3. Substitute Kf=19.5 JK_f = 19.5\text{ J} and m=2.50 kgm = 2.50\text{ kg}: vf=2(19.5)2.50=15.6≈3.95 m/sv_f = \sqrt{\frac{2(19.5)}{2.50}} = \sqrt{15.6} \approx 3.95\text{ m/s}.

Final answer

(a) K1=65.7 JK_1 = 65.7\text{ J}; (b) Wf,bed=−46.2 JW_{f,\text{bed}} = -46.2\text{ J}; (c) vf≈3.95 m/sv_f \approx 3.95\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating speed from the kinetic energy formula until taking the square root becomes automatic.

  • Perform a quick dimensional sanity check on algebraic steps: verify that quantities equated to speed have units of m/s\text{m/s}.

Lock it in

Similar question

01

A 3.00 kg3.00\text{ kg} sled starts from rest at the top of a hill of height h=5.00 mh = 5.00\text{ m}. During the descent, friction does −40.0 J-40.0\text{ J} of work. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the sled's kinetic energy at the bottom of the hill.

Answer

Kf=107 JK_f = 107\text{ J}. Initial potential energy is Ui=mgh=(3.00)(9.80)(5.00)=147 JU_i = mgh = (3.00)(9.80)(5.00) = 147\text{ J}. Energy balance gives Kf=Ui+Wf=147 J+(−40.0 J)=107 JK_f = U_i + W_f = 147\text{ J} + (-40.0\text{ J}) = 107\text{ J}.

02

A 1.50 kg1.50\text{ kg} cart moving at 6.00 m/s6.00\text{ m/s} along a horizontal track enters a rough patch of length 2.00 m2.00\text{ m} where kinetic friction exerts a constant force of 8.00 N8.00\text{ N}. Find the cart's speed as it leaves the rough patch.

Answer

vf=3.83 m/sv_f = 3.83\text{ m/s}. Initial kinetic energy is Ki=12(1.50)(6.00)2=27.0 JK_i = \frac{1}{2}(1.50)(6.00)^2 = 27.0\text{ J}. Friction work is Wf=−fkd=−(8.00)(2.00)=−16.0 JW_f = -f_k d = -(8.00)(2.00) = -16.0\text{ J}. Remaining kinetic energy is Kf=27.0−16.0=11.0 JK_f = 27.0 - 16.0 = 11.0\text{ J}. Thus vf=2(11.0)/1.50≈3.83 m/sv_f = \sqrt{2(11.0)/1.50} \approx 3.83\text{ m/s}.

03

A 0.500 kg0.500\text{ kg} toy car is launched horizontally by a compressed spring (k=400 N/mk = 400\text{ N/m}) compressed by x=0.200 mx = 0.200\text{ m}. The car travels across a flat table where friction does −2.50 J-2.50\text{ J} of work, then glides up a frictionless curved ramp. What maximum vertical height hh does it reach above the table? (g=9.80 m/s2g = 9.80\text{ m/s}^2)

Answer

h=1.12 mh = 1.12\text{ m}. Initial elastic energy is Us=12kx2=12(400)(0.200)2=8.00 JU_s = \frac{1}{2}kx^2 = \frac{1}{2}(400)(0.200)^2 = 8.00\text{ J}. Mechanical energy after the table is E=Us+Wf=8.00 J−2.50 J=5.50 JE = U_s + W_f = 8.00\text{ J} - 2.50\text{ J} = 5.50\text{ J}. At peak height, mgh=5.50 Jmgh = 5.50\text{ J}, so h=5.50(0.500)(9.80)≈1.12 mh = \frac{5.50}{(0.500)(9.80)} \approx 1.12\text{ m}.

Loading workspace…