Resources

A uniform beam of mass M=12.0 kgM = 12.0\text{ kg} and length L=2.40 mL = 2.40\text{ m} is hinged to a vertical wall at (0,0)(0, 0) and held horizontally along the positive xx-axis by a taut cable attached to the beam at x=1.80 mx = 1.80\text{ m}. The cable extends upward and leftward to the wall, making an angle of 35.0∘35.0^\circ with the horizontal beam. Gravitational acceleration acts downward (−j^-\hat{j}, g=9.80 m/s2g = 9.80\text{ m/s}^2). Compute the gravitational torque vector τ⃗g\vec{\tau}_g about the hinge, and determine the tension TT in the cable required so that the net torque τ⃗net\vec{\tau}_{\text{net}} about the hinge is zero, explicitly stating the vector directions of both individual torques.

Answer and steps

Final answer

τ⃗g=−141 N⋅m  k^\vec{\tau}_g = -141\text{ N}\cdot\text{m}\;\hat{k} (clockwise); cable torque τ⃗T=+141 N⋅m  k^\vec{\tau}_T = +141\text{ N}\cdot\text{m}\;\hat{k} (counterclockwise); required tension T=137 NT = 137\text{ N}

Steps

01

Set Up the Coordinate System and Position Vectors

Let the hinge at (0,0)(0, 0) be the origin OO. The horizontal beam lies along the positive xx-axis, with unit vectors i^\hat{i} pointing right, j^\hat{j} pointing vertically upward, and k^=i^×j^\hat{k} = \hat{i} \times \hat{j} pointing out of the page (corresponding to the counterclockwise rotational direction).

  • Center of mass: Because the beam is uniform, gravity acts at its midpoint: r⃗g=(L2)i^=(2.40 m2)i^=1.20 m  i^\vec{r}_g = \left(\frac{L}{2}\right)\hat{i} = \left(\frac{2.40\text{ m}}{2}\right)\hat{i} = 1.20\text{ m}\;\hat{i}
  • Attachment point of the cable: r⃗T=1.80 m  i^\vec{r}_T = 1.80\text{ m}\;\hat{i}

02

Compute the Gravitational Torque Vector

The downward gravitational force is: F⃗g=−Mg j^=−(12.0 kg)(9.80 m/s2) j^=−117.6 N j^\vec{F}_g = -M g\,\hat{j} = -(12.0\text{ kg})(9.80\text{ m/s}^2)\,\hat{j} = -117.6\text{ N}\,\hat{j}

The torque τ⃗g\vec{\tau}_g exerted by gravity about the hinge is given by the cross product: τ⃗g=r⃗g×F⃗g=(1.20 m  i^)×(−117.6 N  j^)\vec{\tau}_g = \vec{r}_g \times \vec{F}_g = (1.20\text{ m}\;\hat{i}) \times (-117.6\text{ N}\;\hat{j})

Using the unit vector identity i^×j^=k^\hat{i} \times \hat{j} = \hat{k}: τ⃗g=−141.12 N⋅m  k^≈−141 N⋅m  k^\vec{\tau}_g = -141.12\text{ N}\cdot\text{m}\;\hat{k} \approx -141\text{ N}\cdot\text{m}\;\hat{k}

The negative sign indicates a direction into the page, which corresponds to a clockwise rotation.


03

Establish the Equilibrium Condition for Torque

For the beam to remain in static equilibrium, the net torque about the hinge must be zero: τ⃗net=τ⃗g+τ⃗T=0⃗\vec{\tau}_{\text{net}} = \vec{\tau}_g + \vec{\tau}_T = \vec{0}

Therefore, the cable torque must directly oppose the gravitational torque: τ⃗T=−τ⃗g=+141.12 N⋅m  k^≈+141 N⋅m  k^\vec{\tau}_T = -\vec{\tau}_g = +141.12\text{ N}\cdot\text{m}\;\hat{k} \approx +141\text{ N}\cdot\text{m}\;\hat{k}

The positive sign indicates a direction out of the page, which corresponds to a counterclockwise rotation.


04

Calculate the Cable Tension

The tension force T⃗\vec{T} pulls upward and leftward at an angle of 35.0∘35.0^\circ to the beam. Only the perpendicular vertical component of tension produces torque about the hinge: FT,⊥=Tsin⁡(35.0∘)F_{T,\perp} = T\sin(35.0^\circ)

The horizontal component passes directly through the pivot line, producing zero torque. Setting the magnitude of the counterclockwise torque equal to the magnitude of the clockwise torque: τT=rT⋅Tsin⁡(35.0∘)\tau_T = r_T \cdot T\sin(35.0^\circ) 1.80 m⋅T⋅sin⁡(35.0∘)=141.12 N⋅m1.80\text{ m} \cdot T \cdot \sin(35.0^\circ) = 141.12\text{ N}\cdot\text{m}

Solve for TT: T=141.12 N⋅m1.80 m⋅sin⁡(35.0∘)=141.121.80⋅0.5736 N≈136.7 N≈137 NT = \frac{141.12\text{ N}\cdot\text{m}}{1.80\text{ m} \cdot \sin(35.0^\circ)} = \frac{141.12}{1.80 \cdot 0.5736}\text{ N} \approx 136.7\text{ N} \approx 137\text{ N}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student places the gravitational force at the full length of the beam instead of at its center of mass, doubling the calculated gravitational torque and resulting tension.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fg=Mg=12.0 kg×9.80 m/s2=117.6 NF_g = Mg = 12.0\text{ kg} \times 9.80\text{ m/s}^2 = 117.6\text{ N}

  2. Step 2

    r⃗g=2.40 m i^  ⟹  τ⃗g=(2.40 m i^)×(−117.6 N j^)=−282.24 N⋅m k^ (clockwise)\vec{r}_g = 2.40\text{ m}\,\hat{i} \implies \vec{\tau}_g = (2.40\text{ m}\,\hat{i}) \times (-117.6\text{ N}\,\hat{j}) = -282.24\text{ N}\cdot\text{m}\,\hat{k}\text{ (clockwise)}

    Correct

    r⃗g=(L2)i^=1.20 m i^  ⟹  τ⃗g=(1.20 m i^)×(−117.6 N j^)≈−141 N⋅m k^ (clockwise)\vec{r}_g = \left(\frac{L}{2}\right)\hat{i} = 1.20\text{ m}\,\hat{i} \implies \vec{\tau}_g = (1.20\text{ m}\,\hat{i}) \times (-117.6\text{ N}\,\hat{j}) \approx -141\text{ N}\cdot\text{m}\,\hat{k}\text{ (clockwise)}

    You placed the gravitational force at the beam's outer tip (L=2.40 mL = 2.40\text{ m}) instead of at the center of mass. For a uniform beam, gravity acts at its midpoint, r⃗g=L2 i^=1.20 m i^\vec{r}_g = \frac{L}{2}\,\hat{i} = 1.20\text{ m}\,\hat{i}.

  3. Step 3

    τ⃗cable=(1.80 m)Tsin⁡(35.0∘) k^ (counterclockwise)\vec{\tau}_{\text{cable}} = (1.80\text{ m})T\sin(35.0^\circ)\,\hat{k}\text{ (counterclockwise)}

  4. Step 4

    τ⃗net=τ⃗cable+τ⃗g=0  ⟹  (1.80 m)Tsin⁡(35.0∘)=282.24 N⋅m  ⟹  T=282.241.80×sin⁡(35.0∘)=273 N\vec{\tau}_{\text{net}} = \vec{\tau}_{\text{cable}} + \vec{\tau}_g = 0 \implies (1.80\text{ m})T\sin(35.0^\circ) = 282.24\text{ N}\cdot\text{m} \implies T = \frac{282.24}{1.80 \times \sin(35.0^\circ)} = 273\text{ N}

    Correct

    τnet=0  ⟹  (1.80 m)Tsin⁡(35.0∘)=141.12 N⋅m  ⟹  T=141.121.80sin⁡(35.0∘)≈137 N\tau_{\text{net}} = 0 \implies (1.80\text{ m})T\sin(35.0^\circ) = 141.12\text{ N}\cdot\text{m} \implies T = \frac{141.12}{1.80\sin(35.0^\circ)} \approx 137\text{ N}

    Your equilibrium equation and algebraic execution were completely sound, but the final tension is double the correct value due to the upstream center-of-mass error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the magnitude of the beam's gravitational force.

You used vector cross products accurately to establish torque directions along ±k^\pm\hat{k}.

You correctly resolved the cable tension into its torque-producing perpendicular component.

You applied the condition for static rotational equilibrium correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Center of mass position error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the entire length of the beam as the lever arm for gravity rather than applying the gravitational force at the center of mass (L/2L/2) of a uniform extended body.

REASONING PATH
Your ACEpath teacher’s suggested approach
Locate Center of Mass for Distributed Loads
  • For any uniform rigid body in a uniform gravitational field, the total weight acts at the geometric center (midpoint), so the position vector from the pivot is r⃗cm=L2 i^\vec{r}_{\text{cm}} = \frac{L}{2}\,\hat{i}.

  • Always mark the midpoint of a uniform beam with an explicit point-mass dot labeled MgMg before writing down the position vector r⃗g\vec{r}_g.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the center of mass position vector: r⃗g=(2.40 m2)i^=1.20 m i^\vec{r}_g = \left(\frac{2.40\text{ m}}{2}\right)\hat{i} = 1.20\text{ m}\,\hat{i}.

  2. Compute the correct gravitational torque: τ⃗g=(1.20 m i^)×(−117.6 N j^)=−141.12 N⋅m k^\vec{\tau}_g = (1.20\text{ m}\,\hat{i}) \times (-117.6\text{ N}\,\hat{j}) = -141.12\text{ N}\cdot\text{m}\,\hat{k}.

  3. Set up rotational equilibrium: (1.80 m)Tsin⁡(35.0∘)−141.12 N⋅m=0(1.80\text{ m})T\sin(35.0^\circ) - 141.12\text{ N}\cdot\text{m} = 0.

  4. Solve for the cable tension: T=141.121.80⋅sin⁡(35.0∘)≈137 NT = \frac{141.12}{1.80 \cdot \sin(35.0^\circ)} \approx 137\text{ N}.

Final answer

τ⃗g=−141 N⋅m k^ (clockwise),  τ⃗T=+141 N⋅m k^ (counterclockwise),  T=137 N\vec{\tau}_g = -141\text{ N}\cdot\text{m}\,\hat{k}\text{ (clockwise)},\; \vec{\tau}_T = +141\text{ N}\cdot\text{m}\,\hat{k}\text{ (counterclockwise)},\; T = 137\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the beam and draw the weight vector directly at its midpoint (x=L/2x = L/2) before writing the torque equation.

  • Practice distinguishing the application point of external concentrated forces (such as cables or supports) from distributed body forces (such as gravity).

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly uses cosine instead of sine to find the perpendicular component of the tension, leading to an incorrect torque expression and tension value.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    xcm=2.40 m/2=1.20 m  ⟹  Fg=12.0 kg×9.80 m/s2=117.6 N  ⟹  τ⃗g=(1.20 m i^)×(−117.6 N j^)=−141.12 N⋅m k^ (clockwise)x_{\text{cm}} = 2.40\text{ m}/2 = 1.20\text{ m} \implies F_g = 12.0\text{ kg} \times 9.80\text{ m/s}^2 = 117.6\text{ N} \implies \vec{\tau}_g = (1.20\text{ m }\hat{i}) \times (-117.6\text{ N }\hat{j}) = -141.12\text{ N}\cdot\text{m }\hat{k}\text{ (clockwise)}

  2. Step 2

    τ⃗cable=(1.80 m)Tcos⁡(35.0∘)k^ (counterclockwise)\vec{\tau}_{\text{cable}} = (1.80\text{ m}) T \cos(35.0^\circ)\hat{k}\text{ (counterclockwise)}

    Correct

    τ⃗T=(1.80 m)Tsin⁡(35.0∘)k^≈+141 N⋅m k^ (counterclockwise)\vec{\tau}_T = (1.80\text{ m}) T \sin(35.0^\circ)\hat{k} \approx +141\text{ N}\cdot\text{m }\hat{k}\text{ (counterclockwise)}

    You correctly recognized that the cable produces counterclockwise torque (+k^+\hat{k}), but because the angle 35.0∘35.0^\circ is measured relative to the horizontal beam, the perpendicular lever component of force is Tsin⁡(35.0∘)T\sin(35.0^\circ), not Tcos⁡(35.0∘)T\cos(35.0^\circ).

  3. Step 3

    τnet=τcable+τg=0  ⟹  (1.80 m)Tcos⁡(35.0∘)=141.12 N⋅m  ⟹  T=141.121.80×cos⁡(35.0∘)=95.7 N\tau_{\text{net}} = \tau_{\text{cable}} + \tau_g = 0 \implies (1.80\text{ m}) T \cos(35.0^\circ) = 141.12\text{ N}\cdot\text{m} \implies T = \frac{141.12}{1.80 \times \cos(35.0^\circ)} = 95.7\text{ N}

    Correct

    1.80 m⋅Tsin⁡(35.0∘)=141.12 N⋅m  ⟹  T=141.12 N⋅m1.80 m⋅sin⁡(35.0∘)≈137 N1.80\text{ m} \cdot T \sin(35.0^\circ) = 141.12\text{ N}\cdot\text{m} \implies T = \frac{141.12\text{ N}\cdot\text{m}}{1.80\text{ m} \cdot \sin(35.0^\circ)} \approx 137\text{ N}

    Your equilibrium equation and algebraic rearrangement were executed correctly, but the result is affected by substituting the cosine expression from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found the center of mass of the uniform beam at its geometric midpoint.

You used vector cross products accurately to establish the magnitude and clockwise orientation of the gravitational torque.

You correctly identified that the cable torque must act counterclockwise along +k^+\hat{k} to balance gravity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Error in Torque

You wrote cos⁡(35.0∘)\cos(35.0^\circ) instead of sin⁡(35.0∘)\sin(35.0^\circ) when finding the torque produced by the angled cable.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the parallel and perpendicular force components when an angle is given with respect to the position vector r⃗\vec{r}. The component of force parallel to the lever arm passes through the pivot and creates zero torque (F∥=Tcos⁡θF_\parallel = T\cos\theta), while the perpendicular component (F⊥=Tsin⁡θF_\perp = T\sin\theta) provides the entire torque.

REASONING PATH
Your ACEpath teacher’s suggested approach
Torque Definition and Force Components
  • Torque magnitude is given by τ=rF⊥=rFsin⁡θ\tau = r F_\perp = r F \sin\theta, where θ\theta is the angle between the lever arm vector r⃗\vec{r} and the force vector F⃗\vec{F}.

  • Draw the force vector at its point of contact, decompose it into components along and perpendicular to the beam, and verify that only the perpendicular component enters the torque calculation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the perpendicular component of the tension force: FT,⊥=Tsin⁡(35.0∘)F_{T,\perp} = T\sin(35.0^\circ).

  2. Set the counterclockwise cable torque equal to the clockwise gravitational torque: rT⋅Tsin⁡(35.0∘)=141.12 N⋅mr_T \cdot T\sin(35.0^\circ) = 141.12\text{ N}\cdot\text{m}.

  3. Substitute rT=1.80 mr_T = 1.80\text{ m}: (1.80 m)⋅T⋅sin⁡(35.0∘)=141.12 N⋅m(1.80\text{ m}) \cdot T \cdot \sin(35.0^\circ) = 141.12\text{ N}\cdot\text{m}.

  4. Solve for tension: T=141.121.80⋅sin⁡(35.0∘)=141.121.80⋅0.57358≈136.7 NT = \frac{141.12}{1.80 \cdot \sin(35.0^\circ)} = \frac{141.12}{1.80 \cdot 0.57358} \approx 136.7\text{ N}.

Final answer

τ⃗g=−141 N⋅m  k^\vec{\tau}_g = -141\text{ N}\cdot\text{m}\;\hat{k} (clockwise); τ⃗T=+141 N⋅m  k^\vec{\tau}_T = +141\text{ N}\cdot\text{m}\;\hat{k} (counterclockwise); T=137 NT = 137\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the perpendicular component F⊥F_\perp on your free-body diagram whenever a force acts at an angle to a lever arm.

  • Check that your torque formula satisfies the limiting cases: at θ=0∘\theta = 0^\circ, torque must be zero ("sin⁡(0∘)=0""\sin(0^\circ) = 0"), not maximum.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the torque using the total beam length as the lever arm for the cable rather than the actual attachment position x = 1.80 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    xcm=1.20 m  ⟹  Fg=12.0 kg×9.80 m/s2=117.6 N  ⟹  τ⃗g=(1.20 m i^)×(−117.6 N j^)=−141.12 N⋅m k^ (clockwise)x_{\text{cm}} = 1.20\text{ m} \implies F_g = 12.0\text{ kg} \times 9.80\text{ m/s}^2 = 117.6\text{ N} \implies \vec{\tau}_g = (1.20\text{ m }\hat{i}) \times (-117.6\text{ N }\hat{j}) = -141.12\text{ N}\cdot\text{m }\hat{k}\text{ (clockwise)}

  2. Step 2

    τ⃗cable=(2.40 m)Tsin⁡(35.0∘)k^ (counterclockwise)\vec{\tau}_{\text{cable}} = (2.40\text{ m})T\sin(35.0^\circ)\hat{k}\text{ (counterclockwise)}

    Correct

    τ⃗T=(1.80 m)Tsin⁡(35.0∘)k^ (counterclockwise)\vec{\tau}_{T} = (1.80\text{ m})T\sin(35.0^\circ)\hat{k}\text{ (counterclockwise)}

    The cable attaches to the beam at x=1.80 mx = 1.80\text{ m}, not at the outer end of the beam (x=2.40 mx = 2.40\text{ m}). The position vector r⃗\vec{r} from the pivot to the point of force application must use r=1.80 mr = 1.80\text{ m}.

  3. Step 3

    τnet=τcable+τg=0  ⟹  (2.40 m)Tsin⁡(35.0∘)=141.12 N⋅m  ⟹  T=141.122.40×sin⁡(35.0∘)=103 N\tau_{\text{net}} = \tau_{\text{cable}} + \tau_g = 0 \implies (2.40\text{ m})T\sin(35.0^\circ) = 141.12\text{ N}\cdot\text{m} \implies T = \frac{141.12}{2.40 \times \sin(35.0^\circ)} = 103\text{ N}

    Correct

    (1.80 m)Tsin⁡(35.0∘)=141.12 N⋅m  ⟹  T=141.12 N⋅m1.80 m×sin⁡(35.0∘)≈137 N(1.80\text{ m})T\sin(35.0^\circ) = 141.12\text{ N}\cdot\text{m} \implies T = \frac{141.12\text{ N}\cdot\text{m}}{1.80\text{ m} \times \sin(35.0^\circ)} \approx 137\text{ N}

    Your torque balance setup and algebra were correct, but the calculated tension value was affected by using the incorrect lever arm length from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You placed the weight of the beam correctly at its center of mass (x=1.20 mx = 1.20\text{ m}).

You calculated the gravitational torque vector accurately with both the unit vector −k^-\hat{k} and clockwise direction.

You correctly identified that the vertical component of cable tension produces counterclockwise torque (+k^+\hat{k}).

You set up the static equilibrium condition τ⃗net=0⃗\vec{\tau}_{\text{net}} = \vec{0} correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Lever Arm / Attachment Point

You substituted the total beam length L=2.40 mL = 2.40\text{ m} into the torque formula instead of the cable attachment distance x=1.80 mx = 1.80\text{ m}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total length of a rigid body with the specific position vector r⃗\vec{r} of an applied force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Position Vector for Each Force
  • In τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F}, the vector r⃗\vec{r} always points from the chosen pivot point directly to the exact point where the force is applied, not to the end of the object.

  • Before writing the torque expression, write out r⃗force\vec{r}_{\text{force}} explicitly for each force based on its stated attachment coordinate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the torque exerted by the cable about the pivot using the attachment position rT=1.80 mr_T = 1.80\text{ m}: τT=rTTsin⁡(35.0∘)=(1.80 m)Tsin⁡(35.0∘)\tau_T = r_T T \sin(35.0^\circ) = (1.80\text{ m}) T \sin(35.0^\circ).

  2. Equate the counterclockwise cable torque to the clockwise gravitational torque: (1.80 m)Tsin⁡(35.0∘)=141.12 N⋅m(1.80\text{ m}) T \sin(35.0^\circ) = 141.12\text{ N}\cdot\text{m}.

  3. Solve for the tension: T=141.121.80×sin⁡(35.0∘)=141.121.0325≈137 NT = \frac{141.12}{1.80 \times \sin(35.0^\circ)} = \frac{141.12}{1.0325} \approx 137\text{ N}.

Final answer

T=137 NT = 137\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how each force's position vector is defined relative to the chosen rotation axis.

  • Practice identifying the lever arm for forces applied at interior points of a beam rather than at the extremities.

Lock it in

Similar question

01

A uniform horizontal shelf of length 1.60 m1.60\text{ m} and mass 6.00 kg6.00\text{ kg} is hinged to a wall at its left end. A vertical support wire is attached at the right end (x=1.60 mx = 1.60\text{ m}). Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the gravitational torque about the hinge and the tension in the vertical support wire.

Answer

τ⃗g=−47.0 N⋅m k^\vec{\tau}_g = -47.0\text{ N}\cdot\text{m}\,\hat{k} and T=29.4 NT = 29.4\text{ N}. Gravity acts at x=0.80 mx = 0.80\text{ m}, so τg=−(0.80 m)(6.00 kg×9.80 m/s2)=−47.04 N⋅m\tau_g = -(0.80\text{ m})(6.00\text{ kg}\times 9.80\text{ m/s}^2) = -47.04\text{ N}\cdot\text{m}. For equilibrium, τT+τg=0  ⟹  (1.60 m)T=47.04 N⋅m  ⟹  T=29.4 N\tau_T + \tau_g = 0 \implies (1.60\text{ m})T = 47.04\text{ N}\cdot\text{m} \implies T = 29.4\text{ N}.

02

A uniform beam of mass 15.0 kg15.0\text{ kg} and length 3.00 m3.00\text{ m} is hinged to a wall at the left end. In addition to its own weight, a point mass of 10.0 kg10.0\text{ kg} sits at the right end (x=3.00 mx = 3.00\text{ m}). Compute the total gravitational torque about the hinge with g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

τ⃗g,total=−515 N⋅m k^\vec{\tau}_{g,\text{total}} = -515\text{ N}\cdot\text{m}\,\hat{k}. Beam weight acts at x=1.50 mx = 1.50\text{ m}: τbeam=−(1.50 m)(15.0 kg×9.80 m/s2)=−220.5 N⋅m\tau_{\text{beam}} = -(1.50\text{ m})(15.0\text{ kg}\times 9.80\text{ m/s}^2) = -220.5\text{ N}\cdot\text{m}. Point mass acts at x=3.00 mx = 3.00\text{ m}: τload=−(3.00 m)(10.0 kg×9.80 m/s2)=−294.0 N⋅m\tau_{\text{load}} = -(3.00\text{ m})(10.0\text{ kg}\times 9.80\text{ m/s}^2) = -294.0\text{ N}\cdot\text{m}. Total torque =−220.5−294.0=−514.5 N⋅m≈−515 N⋅m k^= -220.5 - 294.0 = -514.5\text{ N}\cdot\text{m} \approx -515\text{ N}\cdot\text{m}\,\hat{k}.

03

A uniform beam of mass 20.0 kg20.0\text{ kg} and length 2.50 m2.50\text{ m} is hinged at the left end and held horizontally by a cable attached at x=2.00 mx = 2.00\text{ m}, pulling upward and to the left at an angle of 40.0∘40.0^\circ above the beam. A worker of mass 60.0 kg60.0\text{ kg} stands at x=1.80 mx = 1.80\text{ m}. With g=9.80 m/s2g = 9.80\text{ m/s}^2, find the tension TT in the cable.

Answer

T=1010 NT = 1010\text{ N}. Beam torque: τbeam=−(1.25 m)(20.0 kg×9.80 m/s2)=−245.0 N⋅m\tau_{\text{beam}} = -(1.25\text{ m})(20.0\text{ kg}\times 9.80\text{ m/s}^2) = -245.0\text{ N}\cdot\text{m}. Worker torque: τworker=−(1.80 m)(60.0 kg×9.80 m/s2)=−1058.4 N⋅m\tau_{\text{worker}} = -(1.80\text{ m})(60.0\text{ kg}\times 9.80\text{ m/s}^2) = -1058.4\text{ N}\cdot\text{m}. Total clockwise torque magnitude =1303.4 N⋅m= 1303.4\text{ N}\cdot\text{m}. Cable torque magnitude =(2.00 m)Tsin⁡(40.0∘)=1.2856 T= (2.00\text{ m})T\sin(40.0^\circ) = 1.2856\,T. Equating torques: T=1303.41.2856≈1014 N≈1.01×103 NT = \frac{1303.4}{1.2856} \approx 1014\text{ N} \approx 1.01\times 10^3\text{ N}.

Loading workspace…