Resources

A small plastic bead with mass m=2.50×10−3 kgm = 2.50 \times 10^{-3}\text{ kg} and net charge q1=+0.750 μCq_1 = +0.750\text{ }\mu\text{C} is suspended from a ceiling by a light, non-conducting string of length L=0.500 mL = 0.500\text{ m}. A second identical bead carrying charge q2=+0.750 μCq_2 = +0.750\text{ }\mu\text{C} is held fixed horizontally at the same vertical level as the suspended bead's equilibrium position, repelling it horizontally such that the string makes a static angle θ=15.0∘\theta = 15.0^\circ with the vertical. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2 and ke=8.988×109 N⋅m2/C2k_e = 8.988 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2, find the horizontal distance dd between the two charges in this coupled mechanical-electrostatic equilibrium.

Answer and steps

Final answer

d=0.873 md = 0.873\text{ m}

Steps

01

Identify the Forces in Equilibrium

Consider the suspended bead of mass mm and charge q1q_1. When it is displaced by an angle θ\theta from the vertical, three forces act on it:

  1. Gravitational force acting vertically downward: Fg=mgF_g = mg
  2. Tension T⃗\vec{T} directed along the string at an angle θ\theta to the vertical.
  3. Electrostatic repulsive force F⃗e\vec{F}_e exerted by the fixed charge q2q_2, acting purely horizontally because the two charges are at the same vertical level.

02

Set Up the Static Equilibrium Conditions

Resolve the forces into horizontal (xx) and vertical (yy) components:

  • Along the vertical direction, the upward component of tension balances gravity: ∑Fy=Tcos⁡θ−mg=0  ⟹  Tcos⁡θ=mg\sum F_y = T \cos\theta - mg = 0 \implies T \cos\theta = mg
  • Along the horizontal direction, the horizontal component of tension balances the repulsive electrostatic force: ∑Fx=Fe−Tsin⁡θ=0  ⟹  Fe=Tsin⁡θ\sum F_x = F_e - T \sin\theta = 0 \implies F_e = T \sin\theta

Dividing the horizontal equilibrium equation by the vertical equilibrium equation eliminates the unknown tension TT: Tsin⁡θTcos⁡θ=Femg  ⟹  tan⁡θ=Femg\frac{T \sin\theta}{T \cos\theta} = \frac{F_e}{mg} \implies \tan\theta = \frac{F_e}{mg}

Solving for the electrostatic force gives: Fe=mgtan⁡θF_e = mg \tan\theta


03

Apply Coulomb's Law

According to Coulomb's Law, the magnitude of the electrostatic force between two point charges separated by a distance dd is: Fe=ke∣q1q2∣d2F_e = \frac{k_e |q_1 q_2|}{d^2}

Since both charges are positive (q1=q2=+0.750 μCq_1 = q_2 = +0.750\text{ }\mu\text{C}), the force is repulsive: keq1q2d2=mgtan⁡θ\frac{k_e q_1 q_2}{d^2} = mg \tan\theta

Rearranging for the equilibrium separation distance dd: d2=keq1q2mgtan⁡θ  ⟹  d=keq1q2mgtan⁡θd^2 = \frac{k_e q_1 q_2}{mg \tan\theta} \implies d = \sqrt{\frac{k_e q_1 q_2}{mg \tan\theta}}


04

Substitute the Given Values and Calculate

Substitute the given quantities into the expression:

  • m=2.50×10−3 kgm = 2.50 \times 10^{-3}\text{ kg}
  • g=9.80 m/s2g = 9.80\text{ m/s}^2
  • θ=15.0∘\theta = 15.0^\circ
  • q1=q2=0.750×10−6 Cq_1 = q_2 = 0.750 \times 10^{-6}\text{ C}
  • ke=8.988×109 N⋅m2/C2k_e = 8.988 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2

Compute the electrostatic numerator: keq1q2=(8.988×109 N⋅m2/C2)(0.750×10−6 C)2≈5.056×10−3 N⋅m2k_e q_1 q_2 = (8.988 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2)(0.750 \times 10^{-6}\text{ C})^2 \approx 5.056 \times 10^{-3}\text{ N}\cdot\text{m}^2

Compute the mechanical denominator: mgtan⁡(15.0∘)=(2.50×10−3 kg)(9.80 m/s2)tan⁡(15.0∘)≈6.565×10−3 Nmg \tan(15.0^\circ) = (2.50 \times 10^{-3}\text{ kg})(9.80\text{ m/s}^2)\tan(15.0^\circ) \approx 6.565 \times 10^{-3}\text{ N}

Evaluate the separation distance dd: d=5.056×10−36.565×10−3≈0.873 md = \sqrt{\frac{5.056 \times 10^{-3}}{6.565 \times 10^{-3}}} \approx 0.873\text{ m}


Common Pitfall to Avoid

The string length L=0.500 mL = 0.500\text{ m} is provided as part of the physical system's description, but it is not needed to find dd. A common error is attempting to equate dd to the bead's horizontal deflection Lsin⁡θL \sin\theta. That deflection only measures the bead's displacement from the vertical suspension axis, whereas dd is the full horizontal distance between the suspended bead and the second fixed charge.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the sine and cosine components when resolving tension, yielding F_e = mg / tan θ instead of F_e = mg tan θ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Tcos⁡θ=Fe  ⟹  Tsin⁡θ=mg  ⟹  Fe=mgtan⁡θT\cos\theta = F_e \implies T\sin\theta = mg \implies F_e = \frac{mg}{\tan\theta}

    Correct

    Tsin⁡θ=Fe  ⟹  Tcos⁡θ=mg  ⟹  Fe=mgtan⁡θT\sin\theta = F_e \implies T\cos\theta = mg \implies F_e = mg\tan\theta

    Because the angle θ\theta is measured with respect to the vertical, the vertical component of tension is adjacent to θ\theta (Tcos⁡θ=mgT\cos\theta = mg) and the horizontal component is opposite to θ\theta (Tsin⁡θ=FeT\sin\theta = F_e). Dividing the horizontal equation by the vertical equation gives Fe=mgtan⁡θF_e = mg\tan\theta, not mgtan⁡θ\frac{mg}{\tan\theta}.

  2. Step 2

    Fe=(2.50×10−3)(9.80)tan⁡15.0∘=0.09144 NF_e = \frac{(2.50 \times 10^{-3})(9.80)}{\tan 15.0^\circ} = 0.09144\text{ N}

    Correct

    Fe=(2.50×10−3)(9.80)tan⁡15.0∘≈6.565×10−3 NF_e = (2.50 \times 10^{-3})(9.80)\tan 15.0^\circ \approx 6.565 \times 10^{-3}\text{ N}

    Your numerical evaluation followed correctly from your inverted expression for FeF_e, but it inherited the swapped trigonometric ratio.

  3. Step 3

    keq1q2d2=Fe  ⟹  d=(8.988×109)(0.750×10−6)20.09144\frac{k_e q_1 q_2}{d^2} = F_e \implies d = \sqrt{\frac{(8.988 \times 10^9)(0.750 \times 10^{-6})^2}{0.09144}}

    Correct

    d=keq1q2Fe=(8.988×109)(0.750×10−6)26.565×10−3d = \sqrt{\frac{k_e q_1 q_2}{F_e}} = \sqrt{\frac{(8.988 \times 10^9)(0.750 \times 10^{-6})^2}{6.565 \times 10^{-3}}}

    You correctly formulated Coulomb's law and rearranged it for the separation distance dd, but you used the incorrect force value from Step 2.

  4. Step 4

    d=0.235 md = 0.235\text{ m}

    Correct

    d≈0.873 md \approx 0.873\text{ m}

    The final numerical value is smaller than expected because the calculated electrostatic force was too large.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified all three forces acting on the suspended bead: gravity, electrostatic repulsion, and tension.

You eliminated the unknown tension TT cleanly between the two component equations.

You accurately stated and rearranged Coulomb's law to solve for the separation distance dd.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Swap

You associated cosine with the horizontal axis and sine with the vertical axis by default, overlooking that the angle θ\theta was specified relative to the vertical.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing standard horizontal reference angles with vertical reference angles when resolving vector components into right triangles.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Axis Check
  • When an angle θ\theta is given with respect to the vertical, the component along the vertical is Tcos⁡θT\cos\theta and the component along the horizontal is Tsin⁡θT\sin\theta.

  • Always sketch the right triangle formed by the vector and explicitly label which leg is adjacent to θ\theta before writing down sine or cosine.

Limiting Angle Check
  • As the deflection angle approaches zero (theta→0\\theta \to 0), the required horizontal deflecting force must approach zero (Fe→0F_e \to 0).

  • Check your formula in the limit: mgtan⁡(0∘)=0mg\tan(0^\circ) = 0, whereas mgtan⁡(0∘)→∞\frac{mg}{\tan(0^\circ)} \to \infty would unphysically predict infinite force at zero deflection.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the horizontal and vertical equilibrium equations using the vertical reference angle: Tsin⁡(15.0∘)=FeT\sin(15.0^\circ) = F_e and Tcos⁡(15.0∘)=mgT\cos(15.0^\circ) = mg.

  2. Divide horizontal by vertical to solve for the electric force: Fe=mgtan⁡(15.0∘)=(2.50×10−3 kg)(9.80 m/s2)tan⁡(15.0∘)≈6.565×10−3 NF_e = mg\tan(15.0^\circ) = (2.50 \times 10^{-3}\text{ kg})(9.80\text{ m/s}^2)\tan(15.0^\circ) \approx 6.565 \times 10^{-3}\text{ N}.

  3. Equate FeF_e to Coulomb's law: d=keq1q2Fe=(8.988×109 N⋅m2/C2)(0.750×10−6 C)26.565×10−3 Nd = \sqrt{\frac{k_e q_1 q_2}{F_e}} = \sqrt{\frac{(8.988 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2)(0.750 \times 10^{-6}\text{ C})^2}{6.565 \times 10^{-3}\text{ N}}}.

  4. Compute the resulting separation distance: d≈0.873 md \approx 0.873\text{ m}.

Final answer

d=0.873 md = 0.873\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing free-body diagrams where angles are defined against the vertical rather than the horizontal.

  • Use extreme-case testing (setting θ=0∘\theta = 0^\circ) to verify whether sine or cosine belongs in the numerator.

  • Complete the follow-up drills below to solidify vector resolution in coupled mechanical-electrostatic systems.

OverviewACEpath Teacher's Diagnosis

02 The student mistakenly assumes the separation distance d is given by the pendulum's horizontal deflection d = L sin θ instead of treating d as an independent electrostatic distance determined by force balance.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    d=Lsin⁡θd = L \sin\theta

    Correct

    tan⁡θ=Femg=keq1q2mgd2\tan\theta = \frac{F_e}{mg} = \frac{k_e q_1 q_2}{mg d^2}

    You set the distance between the two charges equal to the pendulum's horizontal displacement from its pivot line. However, Lsin⁡θL \sin\theta only represents how far the suspended bead swung from the vertical axis, not the separation distance dd to the fixed charge.

  2. Step 2

    d=0.500×sin⁡15.0∘  ⟹  d=0.129 md = 0.500 \times \sin 15.0^\circ \implies d = 0.129\text{ m}

    Correct

    d=keq1q2mgtan⁡θ=(8.988×109)(0.750×10−6)2(2.50×10−3)(9.80)tan⁡15.0∘≈0.873 md = \sqrt{\frac{k_e q_1 q_2}{mg \tan\theta}} = \sqrt{\frac{(8.988 \times 10^9)(0.750 \times 10^{-6})^2}{(2.50 \times 10^{-3})(9.80)\tan 15.0^\circ}} \approx 0.873\text{ m}

    You accurately calculated the numerical value of 0.500sin⁡15.0∘0.500 \sin 15.0^\circ, but the result was incorrect because it came from the geometric misconception in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the geometric relationship for the horizontal displacement of a simple pendulum deflected by an angle θ\theta.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misidentifying geometric displacement as electrostatic separation distance

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the problem purely as a pendulum geometry exercise using the provided string length LL, overlooking that the separation distance dd enters through Coulomb's law and must be determined by the horizontal and vertical equilibrium of forces acting on the suspended bead.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Deflection from Inter-Charge Separation
  • The horizontal distance of a pendulum bob from its vertical axis is Δx=Lsin⁡θ\Delta x = L \sin\theta. The distance dd in Coulomb's law is the total separation between charge q1q_1 and charge q2q_2.

  • Always sketch both charges and clearly label the distance between them as dd before looking for geometric relationships.

Use Force Equilibrium for Electrostatic Deflection
  • In mechanical equilibrium, ∑Fx=0\sum F_x = 0 gives Tsin⁡θ=FeT \sin\theta = F_e and ∑Fy=0\sum F_y = 0 gives Tcos⁡θ=mgT \cos\theta = mg, which combine to Fe=mgtan⁡θF_e = mg \tan\theta.

  • Express the electrostatic force Fe=ke∣q1q2∣d2F_e = \frac{k_e |q_1 q_2|}{d^2} in terms of the balancing mechanical forces to solve for dd directly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Balance the vertical forces to find tension: Tcos⁡θ=mgT \cos\theta = mg.

  2. Balance the horizontal forces: Fe=Tsin⁡θF_e = T \sin\theta.

  3. Divide the two equations to eliminate tension: tan⁡θ=Femg  ⟹  Fe=mgtan⁡θ\tan\theta = \frac{F_e}{mg} \implies F_e = mg \tan\theta.

  4. Substitute Coulomb's law: keq1q2d2=mgtan⁡θ\frac{k_e q_1 q_2}{d^2} = mg \tan\theta.

  5. Rearrange to isolate the separation distance: d=keq1q2mgtan⁡θd = \sqrt{\frac{k_e q_1 q_2}{mg \tan\theta}}.

  6. Substitute the given numbers: d=(8.988×109 N⋅m2/C2)(0.750×10−6 C)2(2.50×10−3 kg)(9.80 m/s2)tan⁡(15.0∘)d = \sqrt{\frac{(8.988 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2)(0.750 \times 10^{-6}\text{ C})^2}{(2.50 \times 10^{-3}\text{ kg})(9.80\text{ m/s}^2)\tan(15.0^\circ)}}.

Final answer

d≈0.873 md \approx 0.873\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a free-body diagram for any suspended object with electric charge before setting up equations.

  • Identify superfluous or context-only values—such as string length LL here—that describe the apparatus but do not constrain the force balance.

  • Practice distinguishing between pivot-to-mass displacement and charge-to-charge separation in coupled equilibrium problems.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to take the square root of d² when solving Coulomb's law, reporting the value of d² as the distance d.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Tsin⁡θ=Fe,  Tcos⁡θ=mg  ⟹  Fe=mgtan⁡θ=(2.50×10−3 kg)(9.80 m/s2)tan⁡15.0∘=6.565×10−3 NT \sin\theta = F_e,\; T \cos\theta = mg \implies F_e = mg \tan\theta = (2.50 \times 10^{-3}\text{ kg})(9.80\text{ m/s}^2)\tan 15.0^\circ = 6.565 \times 10^{-3}\text{ N}

  2. Step 2

    Fe=keq1q2d2  ⟹  d=keq1q2FeF_e = \frac{k_e q_1 q_2}{d^2} \implies d = \frac{k_e q_1 q_2}{F_e}

    Correct

    d2=keq1q2Fe  ⟹  d=keq1q2Fed^2 = \frac{k_e q_1 q_2}{F_e} \implies d = \sqrt{\frac{k_e q_1 q_2}{F_e}}

    When solving for distance from Coulomb's law, multiplying by d2d^2 and dividing by FeF_e isolates d2d^2, not dd. You need to take the square root of both sides to isolate dd.

  3. Step 3

    d=(8.988×109)(0.750×10−6)26.565×10−3  ⟹  d=0.770 md = \frac{(8.988 \times 10^9)(0.750 \times 10^{-6})^2}{6.565 \times 10^{-3}} \implies d = 0.770\text{ m}

    Correct

    d=(8.988×109)(0.750×10−6)26.565×10−3=0.7701 m2≈0.873 md = \sqrt{\frac{(8.988 \times 10^9)(0.750 \times 10^{-6})^2}{6.565 \times 10^{-3}}} = \sqrt{0.7701\text{ m}^2} \approx 0.873\text{ m}

    Your arithmetic on the right-hand side was correct for the expression you wrote, but because the square root was missing from the formula, you reported the numerical value of d2d^2 rather than dd.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the tension components balance gravity and the electrostatic force.

You successfully eliminated tension to find Fe=mgtan⁡θF_e = mg \tan\theta with high numerical accuracy.

You correctly stated Coulomb's law in terms of the point charges and distance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square root when solving an inverse-square law

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated d2d^2 in the denominator of Coulomb's law as if it were a linear variable dd when clearing fractions, forgetting that isolating dd requires taking the principal square root.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverse-Square Rearrangement
  • For any inverse-square relationship F=kr2F = \frac{k}{r^2}, isolating the separation distance requires two distinct operations: clearing the denominator to get r2=kFr^2 = \frac{k}{F}, and taking the square root: r=kFr = \sqrt{\frac{k}{F}}.

  • Whenever you cross-multiply a variable with an exponent, keep the exponent explicitly on paper until you perform the inverse operation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write out the rearrangement in two clear steps: d2=keq1q2Fed^2 = \frac{k_e q_1 q_2}{F_e}

  2. Take the square root of both sides: d=keq1q2Fed = \sqrt{\frac{k_e q_1 q_2}{F_e}}

  3. Substitute the values: d=(8.988×109)(0.750×10−6)26.565×10−3d = \sqrt{\frac{(8.988 \times 10^9)(0.750 \times 10^{-6})^2}{6.565 \times 10^{-3}}}

  4. Evaluate the radical: d=0.7701 m2≈0.873 md = \sqrt{0.7701\text{ m}^2} \approx 0.873\text{ m}

Final answer

d=0.873 md = 0.873\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review algebraic isolation of variables in inverse-square laws such as Coulomb's law and Newton's law of gravitation.

  • Practice checking physical units at intermediate steps: here keq2F\frac{k_e q^2}{F} has units of m2\text{m}^2, which immediately signals that a square root is needed to get meters.

Lock it in

Similar question

01

A small sphere with mass m=1.20×10−3 kgm = 1.20 \times 10^{-3}\text{ kg} hangs from a light string. A uniform horizontal electric field EE deflects the sphere so the string maintains an angle θ=30.0∘\theta = 30.0^\circ with the vertical. If the sphere carries charge q=+4.00 μCq = +4.00\text{ }\mu\text{C}, find the electric field strength EE. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

E≈1.70×103 N/CE \approx 1.70 \times 10^3\text{ N/C}. In equilibrium, Tsin⁡θ=qET\sin\theta = qE and Tcos⁡θ=mgT\cos\theta = mg, which yields qE=mgtan⁡θqE = mg\tan\theta. Thus E=mgtan⁡θq=(1.20×10−3 kg)(9.80 m/s2)tan⁡(30.0∘)4.00×10−6 C≈1.70×103 N/CE = \frac{mg\tan\theta}{q} = \frac{(1.20 \times 10^{-3}\text{ kg})(9.80\text{ m/s}^2)\tan(30.0^\circ)}{4.00 \times 10^{-6}\text{ C}} \approx 1.70 \times 10^3\text{ N/C}.

02

Two identical light spheres, each of mass m=3.00 gm = 3.00\text{ g}, hang from the same ceiling hook on separate non-conducting threads of equal length L=0.800 mL = 0.800\text{ m}. When identical charges +q+q are placed on each sphere, each thread forms an angle of 10.0∘10.0^\circ with the vertical. Find the charge qq on each sphere. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2, ke=8.99×109 N⋅m2/C2k_e = 8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2.)

Answer

q≈2.22×10−7 Cq \approx 2.22 \times 10^{-7}\text{ C} (0.222 μC0.222\text{ }\mu\text{C}). The electrostatic repulsion balances gravity via Fe=mgtan⁡(10.0∘)=(3.00×10−3)(9.80)tan⁡(10.0∘)≈5.184×10−3 NF_e = mg\tan(10.0^\circ) = (3.00 \times 10^{-3})(9.80)\tan(10.0^\circ) \approx 5.184 \times 10^{-3}\text{ N}. The separation between spheres is r=2Lsin⁡(10.0∘)=2(0.800)sin⁡(10.0∘)≈0.2778 mr = 2L\sin(10.0^\circ) = 2(0.800)\sin(10.0^\circ) \approx 0.2778\text{ m}. From Coulomb's law, q=rFeke=(0.2778)5.184×10−38.99×109≈2.22×10−7 Cq = r\sqrt{\frac{F_e}{k_e}} = (0.2778)\sqrt{\frac{5.184 \times 10^{-3}}{8.99 \times 10^9}} \approx 2.22 \times 10^{-7}\text{ C}.

03

A charged bead of mass m=4.00×10−3 kgm = 4.00 \times 10^{-3}\text{ kg} and charge q1=+1.50 μCq_1 = +1.50\text{ }\mu\text{C} is suspended from a ceiling by a string of length L=1.00 mL = 1.00\text{ m}. A second charge q2q_2 is fixed on the floor directly beneath the suspension pivot point, at a total vertical distance H=1.00 mH = 1.00\text{ m} below the pivot. When the system is in equilibrium, the string makes an angle θ=60.0∘\theta = 60.0^\circ with the downward vertical. Find the magnitude and sign of charge q2q_2 required to hold this equilibrium configuration. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2, ke=8.99×109 N⋅m2/C2k_e = 8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2.)

Answer

q2=+4.36 μCq_2 = +4.36\text{ }\mu\text{C} (repulsive). The pivot is at (0,0)(0, 0), the bead is at (Lsin⁡60∘,−Lcos⁡60∘)=(0.866 m,−0.500 m)(L\sin 60^\circ, -L\cos 60^\circ) = (0.866\text{ m}, -0.500\text{ m}), and q2q_2 is at (0,−1.00 m)(0, -1.00\text{ m}). The distance vector from q2q_2 to the bead has horizontal component 0.866 m0.866\text{ m} and vertical component 0.500 m0.500\text{ m}, forming an equilateral triangle of side r=1.00 mr = 1.00\text{ m} inclined at 30.0∘30.0^\circ above the horizontal. Taking torque about the suspension pivot: ∑τ=mgLsin⁡(60.0∘)−FeLsin⁡(30.0∘)=0  ⟹  Fe=mgsin⁡(60.0∘)sin⁡(30.0∘)=mg3≈(4.00×10−3)(9.80)(1.732)≈0.0679 N\sum \tau = mg L \sin(60.0^\circ) - F_e L \sin(30.0^\circ) = 0 \implies F_e = mg \frac{\sin(60.0^\circ)}{\sin(30.0^\circ)} = mg\sqrt{3} \approx (4.00 \times 10^{-3})(9.80)(1.732) \approx 0.0679\text{ N}. Since Fe=keq1q2r2F_e = \frac{k_e q_1 q_2}{r^2}, we have q2=Fer2keq1=(0.0679)(1.00)2(8.99×109)(1.50×10−6)≈4.36×10−6 Cq_2 = \frac{F_e r^2}{k_e q_1} = \frac{(0.0679)(1.00)^2}{(8.99 \times 10^9)(1.50 \times 10^{-6})} \approx 4.36 \times 10^{-6}\text{ C}.

Loading workspace…